xops-pat/test/yml/css/egress.yml

Procedure generator for on space operations

title: EGRESS/SETUP
duration: 00:25

steps:
  # First steps in IV column (first column)
  - simo:
      IV:
        - step: Record PET start time ____:____ (Pwr to Batt)
        - step: Start WVS Recorders
          images: ./WVSRecorders.png
      EV1:
        - step: '{{CHECK}} All gates closed & hooks locked'
          title: '**Initial Configuration**'
          checkboxes:
            - '{{CHECKMARK}} R Waist Tether to EV2 Blank hook'
            - '{{CHECKMARK}} Red hook on L D-ring ext'
            - '{{CHECKMARK}} Yellow hook on Green ERCM'
            - '{{CHECKMARK}} Green hook on Red ERCM'
            - '{{CHECKMARK}} Blank hook on MWS'
      EV2:
        - step: '{{CHECK}} All gates closed & hooks locked'
          title: '*Initial Configuration*'
          checkboxes:
            - '{{CHECKMARK}} All gates closed & hooks locked'
            - '{{CHECKMARK}} R Waist Tether to A/L D-ring ext'
            - '{{CHECKMARK}} Red hook on L D-ring ext'
            - '{{CHECKMARK}} Yellow hook on Green ERCM'
            - '{{CHECKMARK}} Green hook on Red ERCM'
            - '{{CHECKMARK}} Blank hook to EV1 R Waist Tether'

  # FIXME: How to handle "EGRESS/SETUP" header after initial configuration.

  # EV1's step "open thermal cover" should really drive the IV's step to start a
  # clock. The steps below show the YAML equivalent to the STS-134 procedure.
  - simo:
      EV1: 
        - step: Open hatch thermal cover
          title: EGRESS/SETUP (00:25)
        - step: Egress A/L
      IV: 'Start Hatch thermal cover clock PET (30 min) ____:____'

  # # The next step is an ALTERNATE to the EV1 and IV steps above that merges
  # # these into a single block (since one drives the other).
  # -simo:
  #   - IV + EV1:
  #       - step: 'EV1 open thermal cover. IV start clock (30 min) ____:____'

  # And here's another alternate. This would indicate that one step has a step
  # in another column that must follow it.
  # - EV1: Open hatch thermal cover
  #   causes:
  #    - IV: 'Start Hatch Thermal Cover clock PET (30 min) ____:____'

  # # # End of alternate methods # # #
  - simo:
      EV1:
        - step: Receive EWC ORU bag from EV3, stow on BRT w/RET
      EV2:
        - step: Transfer EWC ORU Bag to EV1
          checkboxes:
            - Position CETA ORU bag near hatch

      EV2: Egress A/L

  # FIXME: Perhaps this should be a "simo" block. Two essentially identical sets
  #        of steps, one in each column, performed at the same time. How to
  #        visually indicate "simo" in the display format (not in YAML)?
  - simo:
      EV2:
        - step: Perform buddy checks
          checkboxes:
            - MWS tabs up
            - BRT tab up
            - tether configs
        - step: Verify SAFER config
          checkboxes:
            - '{{CHECKMARK}}L handle down (MAN ISOL Vlv - Open)'
            - '{{CHECKMARK}}R handle down (HCM - Closed)'
        - step: '{{CHECKMARK}}WVS - Green LED'

      IV:
        - step: 'Post crew egress, WVS Software:'
          substeps:
            - step: select page - RF camera.
            - step: Sel 'Advanced Controls'
            # I'm not sure about the indenting on this one in the real procedure. We
            # don't do all these steps anymore.
            - step: S-Band Level (two) - Max
  - simo:
      EV1:
        - step: Perform buddy checks
          checkboxes:
            - MWS tabs up
            - BRT tab up
            - tether configs
        - step: Verify SAFER config
          checkboxes:
            - '{{CHECKMARK}}L handle down (MAN ISOL Vlv - Open)'
            - '{{CHECKMARK}}R handle down (HCM - Closed)'
        - step: '{{CHECKMARK}}WVS - Green LED'
      # EV2's steps are a copy/paste of EV1.
      EV2:
        - step: Perform buddy checks
          checkboxes:
            - MWS tabs up
            - BRT tab up
            - tether configs
        - step: Verify SAFER config
          checkboxes:
            - '{{CHECKMARK}}L handle down (MAN ISOL Vlv - Open)'
            - '{{CHECKMARK}}R handle down (HCM - Closed)'
        - step: '{{CHECKMARK}}WVS - Green LED'
  # MediaWiki formatter in place later.
  - simo:
      EV1:
        - step: Translate to S0 Port Struts
        - step: Attach EV1 **BLANK** hook to port-outboard strut
          checkboxes:
            - '{{CHECKMARK}} Gat closed, hook locked, reels unlocked, release RET'
        - step: Attach EV2 **BLANK** hook to port-inboard strut
          checkboxes:
            - '{{CHECKMARK}} Gate closed, hook locked'
        - step: Release EV1 R Waist Tether from EV2 **BLANK** hook
      EV2:
        - step: Retrieve CETA ORU bag, stow on BRT with RET

  # This corresponds to page 7-20, EV1 step 12 and EV2 step 8. I've re-written
  # it to be one step in a shared (merged) column.
  - simo:
      EV1:
        - step: Give **EV3 GO** to release Waist Tether
      EV2:
        - step: On **EV1 GO**, EV2 release right Waist Tether from Airlock internal D-Ring

  - simo:
      EV1:
        - step: Translate forward along Lab.
        # "HR" means "handrail". At some point in the future it may be cool to use
        # some sort of template here like: "on Lab HR {{HR|0260}}, {{HR|0259}} ..."
        # that allows us to generate links to our CAD/VR model of the space station.
        # This way people who are reading along and thinking "where is HR 0260" can
        # just click a link and see in the model (assuming they're viewing in an
        # HTML, not printed, version).
        - step: Stow EWC ORU bag on Lab HR 0260, 0259 with hinge ISS aft
        - step: Translate to S1 Face 1, zenith - MISSE 7 Retrieve
      EV2:
        - step: Close hatch thermal cover
        # best here would be to add IV's step using "causes".
        # causes:
        # - IV: "Stop Hatch Thermal Cover clock PET (30 min) ____:____"
        - step: Perform translation adaptation
        - step: Translate to S1 Face 1, nadir - MISSE 7 Retrieve
      # If not able to do the "causes" block above, do this:
  - IV:
    - step: 'Stop Hatch Thermal Cover clock PET (30 min) ____:____'