universal-s3/clients/ses.d.ts

Universal S3 SDK for JavaScript, available for Node.js backends

import {Request} from '../lib/request';
import {Response} from '../lib/response';
import {AWSError} from '../lib/error';
import {Service} from '../lib/service';
import {WaiterConfiguration} from '../lib/service';
import {ServiceConfigurationOptions} from '../lib/service';
import {ConfigBase as Config} from '../lib/config';
interface Blob {}
declare class SES extends Service {
  /**
   * Constructs a service object. This object has one method for each API operation.
   */
  constructor(options?: SES.Types.ClientConfiguration)
  config: Config & SES.Types.ClientConfiguration;
  /**
   * Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set. For information about setting up rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  cloneReceiptRuleSet(params: SES.Types.CloneReceiptRuleSetRequest, callback?: (err: AWSError, data: SES.Types.CloneReceiptRuleSetResponse) => void): Request<SES.Types.CloneReceiptRuleSetResponse, AWSError>;
  /**
   * Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set. For information about setting up rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  cloneReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.CloneReceiptRuleSetResponse) => void): Request<SES.Types.CloneReceiptRuleSetResponse, AWSError>;
  /**
   * Creates a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createConfigurationSet(params: SES.Types.CreateConfigurationSetRequest, callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetResponse) => void): Request<SES.Types.CreateConfigurationSetResponse, AWSError>;
  /**
   * Creates a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createConfigurationSet(callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetResponse) => void): Request<SES.Types.CreateConfigurationSetResponse, AWSError>;
  /**
   * Creates a configuration set event destination.  When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).  An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createConfigurationSetEventDestination(params: SES.Types.CreateConfigurationSetEventDestinationRequest, callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetEventDestinationResponse) => void): Request<SES.Types.CreateConfigurationSetEventDestinationResponse, AWSError>;
  /**
   * Creates a configuration set event destination.  When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).  An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createConfigurationSetEventDestination(callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetEventDestinationResponse) => void): Request<SES.Types.CreateConfigurationSetEventDestinationResponse, AWSError>;
  /**
   * Creates an association between a configuration set and a custom domain for open and click event tracking.  By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.
   */
  createConfigurationSetTrackingOptions(params: SES.Types.CreateConfigurationSetTrackingOptionsRequest, callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetTrackingOptionsResponse) => void): Request<SES.Types.CreateConfigurationSetTrackingOptionsResponse, AWSError>;
  /**
   * Creates an association between a configuration set and a custom domain for open and click event tracking.  By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.
   */
  createConfigurationSetTrackingOptions(callback?: (err: AWSError, data: SES.Types.CreateConfigurationSetTrackingOptionsResponse) => void): Request<SES.Types.CreateConfigurationSetTrackingOptionsResponse, AWSError>;
  /**
   * Creates a new custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createCustomVerificationEmailTemplate(params: SES.Types.CreateCustomVerificationEmailTemplateRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
  /**
   * Creates a new custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createCustomVerificationEmailTemplate(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
  /**
   * Creates a new IP address filter. For information about setting up IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createReceiptFilter(params: SES.Types.CreateReceiptFilterRequest, callback?: (err: AWSError, data: SES.Types.CreateReceiptFilterResponse) => void): Request<SES.Types.CreateReceiptFilterResponse, AWSError>;
  /**
   * Creates a new IP address filter. For information about setting up IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createReceiptFilter(callback?: (err: AWSError, data: SES.Types.CreateReceiptFilterResponse) => void): Request<SES.Types.CreateReceiptFilterResponse, AWSError>;
  /**
   * Creates a receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createReceiptRule(params: SES.Types.CreateReceiptRuleRequest, callback?: (err: AWSError, data: SES.Types.CreateReceiptRuleResponse) => void): Request<SES.Types.CreateReceiptRuleResponse, AWSError>;
  /**
   * Creates a receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createReceiptRule(callback?: (err: AWSError, data: SES.Types.CreateReceiptRuleResponse) => void): Request<SES.Types.CreateReceiptRuleResponse, AWSError>;
  /**
   * Creates an empty receipt rule set. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createReceiptRuleSet(params: SES.Types.CreateReceiptRuleSetRequest, callback?: (err: AWSError, data: SES.Types.CreateReceiptRuleSetResponse) => void): Request<SES.Types.CreateReceiptRuleSetResponse, AWSError>;
  /**
   * Creates an empty receipt rule set. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.CreateReceiptRuleSetResponse) => void): Request<SES.Types.CreateReceiptRuleSetResponse, AWSError>;
  /**
   * Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createTemplate(params: SES.Types.CreateTemplateRequest, callback?: (err: AWSError, data: SES.Types.CreateTemplateResponse) => void): Request<SES.Types.CreateTemplateResponse, AWSError>;
  /**
   * Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  createTemplate(callback?: (err: AWSError, data: SES.Types.CreateTemplateResponse) => void): Request<SES.Types.CreateTemplateResponse, AWSError>;
  /**
   * Deletes a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteConfigurationSet(params: SES.Types.DeleteConfigurationSetRequest, callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetResponse) => void): Request<SES.Types.DeleteConfigurationSetResponse, AWSError>;
  /**
   * Deletes a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteConfigurationSet(callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetResponse) => void): Request<SES.Types.DeleteConfigurationSetResponse, AWSError>;
  /**
   * Deletes a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteConfigurationSetEventDestination(params: SES.Types.DeleteConfigurationSetEventDestinationRequest, callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetEventDestinationResponse) => void): Request<SES.Types.DeleteConfigurationSetEventDestinationResponse, AWSError>;
  /**
   * Deletes a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteConfigurationSetEventDestination(callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetEventDestinationResponse) => void): Request<SES.Types.DeleteConfigurationSetEventDestinationResponse, AWSError>;
  /**
   * Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.  Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains. 
   */
  deleteConfigurationSetTrackingOptions(params: SES.Types.DeleteConfigurationSetTrackingOptionsRequest, callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetTrackingOptionsResponse) => void): Request<SES.Types.DeleteConfigurationSetTrackingOptionsResponse, AWSError>;
  /**
   * Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.  Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains. 
   */
  deleteConfigurationSetTrackingOptions(callback?: (err: AWSError, data: SES.Types.DeleteConfigurationSetTrackingOptionsResponse) => void): Request<SES.Types.DeleteConfigurationSetTrackingOptionsResponse, AWSError>;
  /**
   * Deletes an existing custom verification email template.  For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteCustomVerificationEmailTemplate(params: SES.Types.DeleteCustomVerificationEmailTemplateRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
  /**
   * Deletes an existing custom verification email template.  For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteCustomVerificationEmailTemplate(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
  /**
   * Deletes the specified identity (an email address or a domain) from the list of verified identities. You can execute this operation no more than once per second.
   */
  deleteIdentity(params: SES.Types.DeleteIdentityRequest, callback?: (err: AWSError, data: SES.Types.DeleteIdentityResponse) => void): Request<SES.Types.DeleteIdentityResponse, AWSError>;
  /**
   * Deletes the specified identity (an email address or a domain) from the list of verified identities. You can execute this operation no more than once per second.
   */
  deleteIdentity(callback?: (err: AWSError, data: SES.Types.DeleteIdentityResponse) => void): Request<SES.Types.DeleteIdentityResponse, AWSError>;
  /**
   * Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteIdentityPolicy(params: SES.Types.DeleteIdentityPolicyRequest, callback?: (err: AWSError, data: SES.Types.DeleteIdentityPolicyResponse) => void): Request<SES.Types.DeleteIdentityPolicyResponse, AWSError>;
  /**
   * Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteIdentityPolicy(callback?: (err: AWSError, data: SES.Types.DeleteIdentityPolicyResponse) => void): Request<SES.Types.DeleteIdentityPolicyResponse, AWSError>;
  /**
   * Deletes the specified IP address filter. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteReceiptFilter(params: SES.Types.DeleteReceiptFilterRequest, callback?: (err: AWSError, data: SES.Types.DeleteReceiptFilterResponse) => void): Request<SES.Types.DeleteReceiptFilterResponse, AWSError>;
  /**
   * Deletes the specified IP address filter. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteReceiptFilter(callback?: (err: AWSError, data: SES.Types.DeleteReceiptFilterResponse) => void): Request<SES.Types.DeleteReceiptFilterResponse, AWSError>;
  /**
   * Deletes the specified receipt rule. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteReceiptRule(params: SES.Types.DeleteReceiptRuleRequest, callback?: (err: AWSError, data: SES.Types.DeleteReceiptRuleResponse) => void): Request<SES.Types.DeleteReceiptRuleResponse, AWSError>;
  /**
   * Deletes the specified receipt rule. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteReceiptRule(callback?: (err: AWSError, data: SES.Types.DeleteReceiptRuleResponse) => void): Request<SES.Types.DeleteReceiptRuleResponse, AWSError>;
  /**
   * Deletes the specified receipt rule set and all of the receipt rules it contains.  The currently active rule set cannot be deleted.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteReceiptRuleSet(params: SES.Types.DeleteReceiptRuleSetRequest, callback?: (err: AWSError, data: SES.Types.DeleteReceiptRuleSetResponse) => void): Request<SES.Types.DeleteReceiptRuleSetResponse, AWSError>;
  /**
   * Deletes the specified receipt rule set and all of the receipt rules it contains.  The currently active rule set cannot be deleted.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  deleteReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.DeleteReceiptRuleSetResponse) => void): Request<SES.Types.DeleteReceiptRuleSetResponse, AWSError>;
  /**
   * Deletes an email template. You can execute this operation no more than once per second.
   */
  deleteTemplate(params: SES.Types.DeleteTemplateRequest, callback?: (err: AWSError, data: SES.Types.DeleteTemplateResponse) => void): Request<SES.Types.DeleteTemplateResponse, AWSError>;
  /**
   * Deletes an email template. You can execute this operation no more than once per second.
   */
  deleteTemplate(callback?: (err: AWSError, data: SES.Types.DeleteTemplateResponse) => void): Request<SES.Types.DeleteTemplateResponse, AWSError>;
  /**
   * Deprecated. Use the DeleteIdentity operation to delete email addresses and domains.
   */
  deleteVerifiedEmailAddress(params: SES.Types.DeleteVerifiedEmailAddressRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
  /**
   * Deprecated. Use the DeleteIdentity operation to delete email addresses and domains.
   */
  deleteVerifiedEmailAddress(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
  /**
   * Returns the metadata and receipt rules for the receipt rule set that is currently active. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  describeActiveReceiptRuleSet(params: SES.Types.DescribeActiveReceiptRuleSetRequest, callback?: (err: AWSError, data: SES.Types.DescribeActiveReceiptRuleSetResponse) => void): Request<SES.Types.DescribeActiveReceiptRuleSetResponse, AWSError>;
  /**
   * Returns the metadata and receipt rules for the receipt rule set that is currently active. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  describeActiveReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.DescribeActiveReceiptRuleSetResponse) => void): Request<SES.Types.DescribeActiveReceiptRuleSetResponse, AWSError>;
  /**
   * Returns the details of the specified configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  describeConfigurationSet(params: SES.Types.DescribeConfigurationSetRequest, callback?: (err: AWSError, data: SES.Types.DescribeConfigurationSetResponse) => void): Request<SES.Types.DescribeConfigurationSetResponse, AWSError>;
  /**
   * Returns the details of the specified configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  describeConfigurationSet(callback?: (err: AWSError, data: SES.Types.DescribeConfigurationSetResponse) => void): Request<SES.Types.DescribeConfigurationSetResponse, AWSError>;
  /**
   * Returns the details of the specified receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  describeReceiptRule(params: SES.Types.DescribeReceiptRuleRequest, callback?: (err: AWSError, data: SES.Types.DescribeReceiptRuleResponse) => void): Request<SES.Types.DescribeReceiptRuleResponse, AWSError>;
  /**
   * Returns the details of the specified receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  describeReceiptRule(callback?: (err: AWSError, data: SES.Types.DescribeReceiptRuleResponse) => void): Request<SES.Types.DescribeReceiptRuleResponse, AWSError>;
  /**
   * Returns the details of the specified receipt rule set. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  describeReceiptRuleSet(params: SES.Types.DescribeReceiptRuleSetRequest, callback?: (err: AWSError, data: SES.Types.DescribeReceiptRuleSetResponse) => void): Request<SES.Types.DescribeReceiptRuleSetResponse, AWSError>;
  /**
   * Returns the details of the specified receipt rule set. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  describeReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.DescribeReceiptRuleSetResponse) => void): Request<SES.Types.DescribeReceiptRuleSetResponse, AWSError>;
  /**
   * Returns the email sending status of the Amazon SES account for the current region. You can execute this operation no more than once per second.
   */
  getAccountSendingEnabled(callback?: (err: AWSError, data: SES.Types.GetAccountSendingEnabledResponse) => void): Request<SES.Types.GetAccountSendingEnabledResponse, AWSError>;
  /**
   * Returns the custom email verification template for the template name you specify. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  getCustomVerificationEmailTemplate(params: SES.Types.GetCustomVerificationEmailTemplateRequest, callback?: (err: AWSError, data: SES.Types.GetCustomVerificationEmailTemplateResponse) => void): Request<SES.Types.GetCustomVerificationEmailTemplateResponse, AWSError>;
  /**
   * Returns the custom email verification template for the template name you specify. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  getCustomVerificationEmailTemplate(callback?: (err: AWSError, data: SES.Types.GetCustomVerificationEmailTemplateResponse) => void): Request<SES.Types.GetCustomVerificationEmailTemplateResponse, AWSError>;
  /**
   * Returns the current status of Easy DKIM signing for an entity. For domain name identities, this operation also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published. This operation takes a list of identities as input and returns the following information for each:   Whether Easy DKIM signing is enabled or disabled.   A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.   Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.   This operation is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time. For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.
   */
  getIdentityDkimAttributes(params: SES.Types.GetIdentityDkimAttributesRequest, callback?: (err: AWSError, data: SES.Types.GetIdentityDkimAttributesResponse) => void): Request<SES.Types.GetIdentityDkimAttributesResponse, AWSError>;
  /**
   * Returns the current status of Easy DKIM signing for an entity. For domain name identities, this operation also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published. This operation takes a list of identities as input and returns the following information for each:   Whether Easy DKIM signing is enabled or disabled.   A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.   Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.   This operation is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time. For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.
   */
  getIdentityDkimAttributes(callback?: (err: AWSError, data: SES.Types.GetIdentityDkimAttributesResponse) => void): Request<SES.Types.GetIdentityDkimAttributesResponse, AWSError>;
  /**
   * Returns the custom MAIL FROM attributes for a list of identities (email addresses : domains). This operation is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.
   */
  getIdentityMailFromDomainAttributes(params: SES.Types.GetIdentityMailFromDomainAttributesRequest, callback?: (err: AWSError, data: SES.Types.GetIdentityMailFromDomainAttributesResponse) => void): Request<SES.Types.GetIdentityMailFromDomainAttributesResponse, AWSError>;
  /**
   * Returns the custom MAIL FROM attributes for a list of identities (email addresses : domains). This operation is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.
   */
  getIdentityMailFromDomainAttributes(callback?: (err: AWSError, data: SES.Types.GetIdentityMailFromDomainAttributesResponse) => void): Request<SES.Types.GetIdentityMailFromDomainAttributesResponse, AWSError>;
  /**
   * Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes. This operation is throttled at one request per second and can only get notification attributes for up to 100 identities at a time. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.
   */
  getIdentityNotificationAttributes(params: SES.Types.GetIdentityNotificationAttributesRequest, callback?: (err: AWSError, data: SES.Types.GetIdentityNotificationAttributesResponse) => void): Request<SES.Types.GetIdentityNotificationAttributesResponse, AWSError>;
  /**
   * Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes. This operation is throttled at one request per second and can only get notification attributes for up to 100 identities at a time. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.
   */
  getIdentityNotificationAttributes(callback?: (err: AWSError, data: SES.Types.GetIdentityNotificationAttributesResponse) => void): Request<SES.Types.GetIdentityNotificationAttributesResponse, AWSError>;
  /**
   * Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  getIdentityPolicies(params: SES.Types.GetIdentityPoliciesRequest, callback?: (err: AWSError, data: SES.Types.GetIdentityPoliciesResponse) => void): Request<SES.Types.GetIdentityPoliciesResponse, AWSError>;
  /**
   * Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  getIdentityPolicies(callback?: (err: AWSError, data: SES.Types.GetIdentityPoliciesResponse) => void): Request<SES.Types.GetIdentityPoliciesResponse, AWSError>;
  /**
   * Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.
   */
  getIdentityVerificationAttributes(params: SES.Types.GetIdentityVerificationAttributesRequest, callback?: (err: AWSError, data: SES.Types.GetIdentityVerificationAttributesResponse) => void): Request<SES.Types.GetIdentityVerificationAttributesResponse, AWSError>;
  /**
   * Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.
   */
  getIdentityVerificationAttributes(callback?: (err: AWSError, data: SES.Types.GetIdentityVerificationAttributesResponse) => void): Request<SES.Types.GetIdentityVerificationAttributesResponse, AWSError>;
  /**
   * Provides the sending limits for the Amazon SES account.  You can execute this operation no more than once per second.
   */
  getSendQuota(callback?: (err: AWSError, data: SES.Types.GetSendQuotaResponse) => void): Request<SES.Types.GetSendQuotaResponse, AWSError>;
  /**
   * Provides sending statistics for the current AWS Region. The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute period of time. You can execute this operation no more than once per second.
   */
  getSendStatistics(callback?: (err: AWSError, data: SES.Types.GetSendStatisticsResponse) => void): Request<SES.Types.GetSendStatisticsResponse, AWSError>;
  /**
   * Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify. You can execute this operation no more than once per second.
   */
  getTemplate(params: SES.Types.GetTemplateRequest, callback?: (err: AWSError, data: SES.Types.GetTemplateResponse) => void): Request<SES.Types.GetTemplateResponse, AWSError>;
  /**
   * Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify. You can execute this operation no more than once per second.
   */
  getTemplate(callback?: (err: AWSError, data: SES.Types.GetTemplateResponse) => void): Request<SES.Types.GetTemplateResponse, AWSError>;
  /**
   * Provides a list of the configuration sets associated with your Amazon SES account in the current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide.  You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.
   */
  listConfigurationSets(params: SES.Types.ListConfigurationSetsRequest, callback?: (err: AWSError, data: SES.Types.ListConfigurationSetsResponse) => void): Request<SES.Types.ListConfigurationSetsResponse, AWSError>;
  /**
   * Provides a list of the configuration sets associated with your Amazon SES account in the current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide.  You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.
   */
  listConfigurationSets(callback?: (err: AWSError, data: SES.Types.ListConfigurationSetsResponse) => void): Request<SES.Types.ListConfigurationSetsResponse, AWSError>;
  /**
   * Lists the existing custom verification email templates for your account in the current AWS Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  listCustomVerificationEmailTemplates(params: SES.Types.ListCustomVerificationEmailTemplatesRequest, callback?: (err: AWSError, data: SES.Types.ListCustomVerificationEmailTemplatesResponse) => void): Request<SES.Types.ListCustomVerificationEmailTemplatesResponse, AWSError>;
  /**
   * Lists the existing custom verification email templates for your account in the current AWS Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  listCustomVerificationEmailTemplates(callback?: (err: AWSError, data: SES.Types.ListCustomVerificationEmailTemplatesResponse) => void): Request<SES.Types.ListCustomVerificationEmailTemplatesResponse, AWSError>;
  /**
   * Returns a list containing all of the identities (email addresses and domains) for your AWS account in the current AWS Region, regardless of verification status. You can execute this operation no more than once per second.
   */
  listIdentities(params: SES.Types.ListIdentitiesRequest, callback?: (err: AWSError, data: SES.Types.ListIdentitiesResponse) => void): Request<SES.Types.ListIdentitiesResponse, AWSError>;
  /**
   * Returns a list containing all of the identities (email addresses and domains) for your AWS account in the current AWS Region, regardless of verification status. You can execute this operation no more than once per second.
   */
  listIdentities(callback?: (err: AWSError, data: SES.Types.ListIdentitiesResponse) => void): Request<SES.Types.ListIdentitiesResponse, AWSError>;
  /**
   * Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  listIdentityPolicies(params: SES.Types.ListIdentityPoliciesRequest, callback?: (err: AWSError, data: SES.Types.ListIdentityPoliciesResponse) => void): Request<SES.Types.ListIdentityPoliciesResponse, AWSError>;
  /**
   * Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies.  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  listIdentityPolicies(callback?: (err: AWSError, data: SES.Types.ListIdentityPoliciesResponse) => void): Request<SES.Types.ListIdentityPoliciesResponse, AWSError>;
  /**
   * Lists the IP address filters associated with your AWS account in the current AWS Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  listReceiptFilters(params: SES.Types.ListReceiptFiltersRequest, callback?: (err: AWSError, data: SES.Types.ListReceiptFiltersResponse) => void): Request<SES.Types.ListReceiptFiltersResponse, AWSError>;
  /**
   * Lists the IP address filters associated with your AWS account in the current AWS Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  listReceiptFilters(callback?: (err: AWSError, data: SES.Types.ListReceiptFiltersResponse) => void): Request<SES.Types.ListReceiptFiltersResponse, AWSError>;
  /**
   * Lists the receipt rule sets that exist under your AWS account in the current AWS Region. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  listReceiptRuleSets(params: SES.Types.ListReceiptRuleSetsRequest, callback?: (err: AWSError, data: SES.Types.ListReceiptRuleSetsResponse) => void): Request<SES.Types.ListReceiptRuleSetsResponse, AWSError>;
  /**
   * Lists the receipt rule sets that exist under your AWS account in the current AWS Region. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  listReceiptRuleSets(callback?: (err: AWSError, data: SES.Types.ListReceiptRuleSetsResponse) => void): Request<SES.Types.ListReceiptRuleSetsResponse, AWSError>;
  /**
   * Lists the email templates present in your Amazon SES account in the current AWS Region. You can execute this operation no more than once per second.
   */
  listTemplates(params: SES.Types.ListTemplatesRequest, callback?: (err: AWSError, data: SES.Types.ListTemplatesResponse) => void): Request<SES.Types.ListTemplatesResponse, AWSError>;
  /**
   * Lists the email templates present in your Amazon SES account in the current AWS Region. You can execute this operation no more than once per second.
   */
  listTemplates(callback?: (err: AWSError, data: SES.Types.ListTemplatesResponse) => void): Request<SES.Types.ListTemplatesResponse, AWSError>;
  /**
   * Deprecated. Use the ListIdentities operation to list the email addresses and domains associated with your account.
   */
  listVerifiedEmailAddresses(callback?: (err: AWSError, data: SES.Types.ListVerifiedEmailAddressesResponse) => void): Request<SES.Types.ListVerifiedEmailAddressesResponse, AWSError>;
  /**
   * Adds or updates the delivery options for a configuration set.
   */
  putConfigurationSetDeliveryOptions(params: SES.Types.PutConfigurationSetDeliveryOptionsRequest, callback?: (err: AWSError, data: SES.Types.PutConfigurationSetDeliveryOptionsResponse) => void): Request<SES.Types.PutConfigurationSetDeliveryOptionsResponse, AWSError>;
  /**
   * Adds or updates the delivery options for a configuration set.
   */
  putConfigurationSetDeliveryOptions(callback?: (err: AWSError, data: SES.Types.PutConfigurationSetDeliveryOptionsResponse) => void): Request<SES.Types.PutConfigurationSetDeliveryOptionsResponse, AWSError>;
  /**
   * Adds or updates a sending authorization policy for the specified identity (an email address or a domain).  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  putIdentityPolicy(params: SES.Types.PutIdentityPolicyRequest, callback?: (err: AWSError, data: SES.Types.PutIdentityPolicyResponse) => void): Request<SES.Types.PutIdentityPolicyResponse, AWSError>;
  /**
   * Adds or updates a sending authorization policy for the specified identity (an email address or a domain).  This API is for the identity owner only. If you have not verified the identity, this API will return an error.  Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  putIdentityPolicy(callback?: (err: AWSError, data: SES.Types.PutIdentityPolicyResponse) => void): Request<SES.Types.PutIdentityPolicyResponse, AWSError>;
  /**
   * Reorders the receipt rules within a receipt rule set.  All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  reorderReceiptRuleSet(params: SES.Types.ReorderReceiptRuleSetRequest, callback?: (err: AWSError, data: SES.Types.ReorderReceiptRuleSetResponse) => void): Request<SES.Types.ReorderReceiptRuleSetResponse, AWSError>;
  /**
   * Reorders the receipt rules within a receipt rule set.  All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.  For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  reorderReceiptRuleSet(callback?: (err: AWSError, data: SES.Types.ReorderReceiptRuleSetResponse) => void): Request<SES.Types.ReorderReceiptRuleSetResponse, AWSError>;
  /**
   * Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it.  You cannot use this API to send generic bounces for mail that was not received by Amazon SES.  For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  sendBounce(params: SES.Types.SendBounceRequest, callback?: (err: AWSError, data: SES.Types.SendBounceResponse) => void): Request<SES.Types.SendBounceResponse, AWSError>;
  /**
   * Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it.  You cannot use this API to send generic bounces for mail that was not received by Amazon SES.  For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.
   */
  sendBounce(callback?: (err: AWSError, data: SES.Types.SendBounceResponse) => void): Request<SES.Types.SendBounceResponse, AWSError>;
  /**
   * Composes an email message to multiple destinations. The message body is created using an email template. In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the following requirements:   The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.   The message must be sent from a verified email address or domain.   If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.    The maximum message size is 10 MB.   Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.   The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.   The number of destinations you can contact in a single call to the API may be limited by your account's maximum sending rate.  
   */
  sendBulkTemplatedEmail(params: SES.Types.SendBulkTemplatedEmailRequest, callback?: (err: AWSError, data: SES.Types.SendBulkTemplatedEmailResponse) => void): Request<SES.Types.SendBulkTemplatedEmailResponse, AWSError>;
  /**
   * Composes an email message to multiple destinations. The message body is created using an email template. In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the foll