universal-s3

import {Request} from '../lib/request'; import {Response} from '../lib/response'; import {AWSError} from '../lib/error'; import {Service} from '../lib/service'; import {WaiterConfiguration} from '../lib/service'; import {ServiceConfigurationOptions} from '../lib/service'; import {ConfigBase as Config} from '../lib/config'; interface Blob {} declare class Redshift extends Service { /** * Constructs a service object. This object has one method for each API operation. */ constructor(options?: Redshift.Types.ClientConfiguration) config: Config & Redshift.Types.ClientConfiguration; /** * Exchanges a DC1 Reserved Node for a DC2 Reserved Node with no changes to the configuration (term, payment type, or number of nodes) and no additional costs. */ acceptReservedNodeExchange(params: Redshift.Types.AcceptReservedNodeExchangeInputMessage, callback?: (err: AWSError, data: Redshift.Types.AcceptReservedNodeExchangeOutputMessage) => void): Request<Redshift.Types.AcceptReservedNodeExchangeOutputMessage, AWSError>; /** * Exchanges a DC1 Reserved Node for a DC2 Reserved Node with no changes to the configuration (term, payment type, or number of nodes) and no additional costs. */ acceptReservedNodeExchange(callback?: (err: AWSError, data: Redshift.Types.AcceptReservedNodeExchangeOutputMessage) => void): Request<Redshift.Types.AcceptReservedNodeExchangeOutputMessage, AWSError>; /** * Adds an inbound (ingress) rule to an Amazon Redshift security group. Depending on whether the application accessing your cluster is running on the Internet or an Amazon EC2 instance, you can authorize inbound access to either a Classless Interdomain Routing (CIDR)/Internet Protocol (IP) range or to an Amazon EC2 security group. You can add as many as 20 ingress rules to an Amazon Redshift security group. If you authorize access to an Amazon EC2 security group, specify EC2SecurityGroupName and EC2SecurityGroupOwnerId. The Amazon EC2 security group and Amazon Redshift cluster must be in the same AWS Region. If you authorize access to a CIDR/IP address range, specify CIDRIP. For an overview of CIDR blocks, see the Wikipedia article on Classless Inter-Domain Routing. You must also associate the security group with a cluster so that clients running on these IP addresses or the EC2 instance are authorized to connect to the cluster. For information about managing security groups, go to Working with Security Groups in the Amazon Redshift Cluster Management Guide. */ authorizeClusterSecurityGroupIngress(params: Redshift.Types.AuthorizeClusterSecurityGroupIngressMessage, callback?: (err: AWSError, data: Redshift.Types.AuthorizeClusterSecurityGroupIngressResult) => void): Request<Redshift.Types.AuthorizeClusterSecurityGroupIngressResult, AWSError>; /** * Adds an inbound (ingress) rule to an Amazon Redshift security group. Depending on whether the application accessing your cluster is running on the Internet or an Amazon EC2 instance, you can authorize inbound access to either a Classless Interdomain Routing (CIDR)/Internet Protocol (IP) range or to an Amazon EC2 security group. You can add as many as 20 ingress rules to an Amazon Redshift security group. If you authorize access to an Amazon EC2 security group, specify EC2SecurityGroupName and EC2SecurityGroupOwnerId. The Amazon EC2 security group and Amazon Redshift cluster must be in the same AWS Region. If you authorize access to a CIDR/IP address range, specify CIDRIP. For an overview of CIDR blocks, see the Wikipedia article on Classless Inter-Domain Routing. You must also associate the security group with a cluster so that clients running on these IP addresses or the EC2 instance are authorized to connect to the cluster. For information about managing security groups, go to Working with Security Groups in the Amazon Redshift Cluster Management Guide. */ authorizeClusterSecurityGroupIngress(callback?: (err: AWSError, data: Redshift.Types.AuthorizeClusterSecurityGroupIngressResult) => void): Request<Redshift.Types.AuthorizeClusterSecurityGroupIngressResult, AWSError>; /** * Authorizes the specified AWS customer account to restore the specified snapshot. For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. */ authorizeSnapshotAccess(params: Redshift.Types.AuthorizeSnapshotAccessMessage, callback?: (err: AWSError, data: Redshift.Types.AuthorizeSnapshotAccessResult) => void): Request<Redshift.Types.AuthorizeSnapshotAccessResult, AWSError>; /** * Authorizes the specified AWS customer account to restore the specified snapshot. For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. */ authorizeSnapshotAccess(callback?: (err: AWSError, data: Redshift.Types.AuthorizeSnapshotAccessResult) => void): Request<Redshift.Types.AuthorizeSnapshotAccessResult, AWSError>; /** * Deletes a set of cluster snapshots. */ batchDeleteClusterSnapshots(params: Redshift.Types.BatchDeleteClusterSnapshotsRequest, callback?: (err: AWSError, data: Redshift.Types.BatchDeleteClusterSnapshotsResult) => void): Request<Redshift.Types.BatchDeleteClusterSnapshotsResult, AWSError>; /** * Deletes a set of cluster snapshots. */ batchDeleteClusterSnapshots(callback?: (err: AWSError, data: Redshift.Types.BatchDeleteClusterSnapshotsResult) => void): Request<Redshift.Types.BatchDeleteClusterSnapshotsResult, AWSError>; /** * Modifies the settings for a list of snapshots. */ batchModifyClusterSnapshots(params: Redshift.Types.BatchModifyClusterSnapshotsMessage, callback?: (err: AWSError, data: Redshift.Types.BatchModifyClusterSnapshotsOutputMessage) => void): Request<Redshift.Types.BatchModifyClusterSnapshotsOutputMessage, AWSError>; /** * Modifies the settings for a list of snapshots. */ batchModifyClusterSnapshots(callback?: (err: AWSError, data: Redshift.Types.BatchModifyClusterSnapshotsOutputMessage) => void): Request<Redshift.Types.BatchModifyClusterSnapshotsOutputMessage, AWSError>; /** * Cancels a resize operation. */ cancelResize(params: Redshift.Types.CancelResizeMessage, callback?: (err: AWSError, data: Redshift.Types.ResizeProgressMessage) => void): Request<Redshift.Types.ResizeProgressMessage, AWSError>; /** * Cancels a resize operation. */ cancelResize(callback?: (err: AWSError, data: Redshift.Types.ResizeProgressMessage) => void): Request<Redshift.Types.ResizeProgressMessage, AWSError>; /** * Copies the specified automated cluster snapshot to a new manual cluster snapshot. The source must be an automated snapshot and it must be in the available state. When you delete a cluster, Amazon Redshift deletes any automated snapshots of the cluster. Also, when the retention period of the snapshot expires, Amazon Redshift automatically deletes it. If you want to keep an automated snapshot for a longer period, you can make a manual copy of the snapshot. Manual snapshots are retained until you delete them. For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. */ copyClusterSnapshot(params: Redshift.Types.CopyClusterSnapshotMessage, callback?: (err: AWSError, data: Redshift.Types.CopyClusterSnapshotResult) => void): Request<Redshift.Types.CopyClusterSnapshotResult, AWSError>; /** * Copies the specified automated cluster snapshot to a new manual cluster snapshot. The source must be an automated snapshot and it must be in the available state. When you delete a cluster, Amazon Redshift deletes any automated snapshots of the cluster. Also, when the retention period of the snapshot expires, Amazon Redshift automatically deletes it. If you want to keep an automated snapshot for a longer period, you can make a manual copy of the snapshot. Manual snapshots are retained until you delete them. For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. */ copyClusterSnapshot(callback?: (err: AWSError, data: Redshift.Types.CopyClusterSnapshotResult) => void): Request<Redshift.Types.CopyClusterSnapshotResult, AWSError>; /** * Creates a new cluster. To create a cluster in Virtual Private Cloud (VPC), you must provide a cluster subnet group name. The cluster subnet group identifies the subnets of your VPC that Amazon Redshift uses when creating the cluster. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. */ createCluster(params: Redshift.Types.CreateClusterMessage, callback?: (err: AWSError, data: Redshift.Types.CreateClusterResult) => void): Request<Redshift.Types.CreateClusterResult, AWSError>; /** * Creates a new cluster. To create a cluster in Virtual Private Cloud (VPC), you must provide a cluster subnet group name. The cluster subnet group identifies the subnets of your VPC that Amazon Redshift uses when creating the cluster. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. */ createCluster(callback?: (err: AWSError, data: Redshift.Types.CreateClusterResult) => void): Request<Redshift.Types.CreateClusterResult, AWSError>; /** * Creates an Amazon Redshift parameter group. Creating parameter groups is independent of creating clusters. You can associate a cluster with a parameter group when you create the cluster. You can also associate an existing cluster with a parameter group after the cluster is created by using ModifyCluster. Parameters in the parameter group define specific behavior that applies to the databases you create on the cluster. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. */ createClusterParameterGroup(params: Redshift.Types.CreateClusterParameterGroupMessage, callback?: (err: AWSError, data: Redshift.Types.CreateClusterParameterGroupResult) => void): Request<Redshift.Types.CreateClusterParameterGroupResult, AWSError>; /** * Creates an Amazon Redshift parameter group. Creating parameter groups is independent of creating clusters. You can associate a cluster with a parameter group when you create the cluster. You can also associate an existing cluster with a parameter group after the cluster is created by using ModifyCluster. Parameters in the parameter group define specific behavior that applies to the databases you create on the cluster. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. */ createClusterParameterGroup(callback?: (err: AWSError, data: Redshift.Types.CreateClusterParameterGroupResult) => void): Request<Redshift.Types.CreateClusterParameterGroupResult, AWSError>; /** * Creates a new Amazon Redshift security group. You use security groups to control access to non-VPC clusters. For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. */ createClusterSecurityGroup(params: Redshift.Types.CreateClusterSecurityGroupMessage, callback?: (err: AWSError, data: Redshift.Types.CreateClusterSecurityGroupResult) => void): Request<Redshift.Types.CreateClusterSecurityGroupResult, AWSError>; /** * Creates a new Amazon Redshift security group. You use security groups to control access to non-VPC clusters. For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. */ createClusterSecurityGroup(callback?: (err: AWSError, data: Redshift.Types.CreateClusterSecurityGroupResult) => void): Request<Redshift.Types.CreateClusterSecurityGroupResult, AWSError>; /** * Creates a manual snapshot of the specified cluster. The cluster must be in the available state. For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. */ createClusterSnapshot(params: Redshift.Types.CreateClusterSnapshotMessage, callback?: (err: AWSError, data: Redshift.Types.CreateClusterSnapshotResult) => void): Request<Redshift.Types.CreateClusterSnapshotResult, AWSError>; /** * Creates a manual snapshot of the specified cluster. The cluster must be in the available state. For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. */ createClusterSnapshot(callback?: (err: AWSError, data: Redshift.Types.CreateClusterSnapshotResult) => void): Request<Redshift.Types.CreateClusterSnapshotResult, AWSError>; /** * Creates a new Amazon Redshift subnet group. You must provide a list of one or more subnets in your existing Amazon Virtual Private Cloud (Amazon VPC) when creating Amazon Redshift subnet group. For information about subnet groups, go to Amazon Redshift Cluster Subnet Groups in the Amazon Redshift Cluster Management Guide. */ createClusterSubnetGroup(params: Redshift.Types.CreateClusterSubnetGroupMessage, callback?: (err: AWSError, data: Redshift.Types.CreateClusterSubnetGroupResult) => void): Request<Redshift.Types.CreateClusterSubnetGroupResult, AWSError>; /** * Creates a new Amazon Redshift subnet group. You must provide a list of one or more subnets in your existing Amazon Virtual Private Cloud (Amazon VPC) when creating Amazon Redshift subnet group. For information about subnet groups, go to Amazon Redshift Cluster Subnet Groups in the Amazon Redshift Cluster Management Guide. */ createClusterSubnetGroup(callback?: (err: AWSError, data: Redshift.Types.CreateClusterSubnetGroupResult) => void): Request<Redshift.Types.CreateClusterSubnetGroupResult, AWSError>; /** * Creates an Amazon Redshift event notification subscription. This action requires an ARN (Amazon Resource Name) of an Amazon SNS topic created by either the Amazon Redshift console, the Amazon SNS console, or the Amazon SNS API. To obtain an ARN with Amazon SNS, you must create a topic in Amazon SNS and subscribe to the topic. The ARN is displayed in the SNS console. You can specify the source type, and lists of Amazon Redshift source IDs, event categories, and event severities. Notifications will be sent for all events you want that match those criteria. For example, you can specify source type = cluster, source ID = my-cluster-1 and mycluster2, event categories = Availability, Backup, and severity = ERROR. The subscription will only send notifications for those ERROR events in the Availability and Backup categories for the specified clusters. If you specify both the source type and source IDs, such as source type = cluster and source identifier = my-cluster-1, notifications will be sent for all the cluster events for my-cluster-1. If you specify a source type but do not specify a source identifier, you will receive notice of the events for the objects of that type in your AWS account. If you do not specify either the SourceType nor the SourceIdentifier, you will be notified of events generated from all Amazon Redshift sources belonging to your AWS account. You must specify a source type if you specify a source ID. */ createEventSubscription(params: Redshift.Types.CreateEventSubscriptionMessage, callback?: (err: AWSError, data: Redshift.Types.CreateEventSubscriptionResult) => void): Request<Redshift.Types.CreateEventSubscriptionResult, AWSError>; /** * Creates an Amazon Redshift event notification subscription. This action requires an ARN (Amazon Resource Name) of an Amazon SNS topic created by either the Amazon Redshift console, the Amazon SNS console, or the Amazon SNS API. To obtain an ARN with Amazon SNS, you must create a topic in Amazon SNS and subscribe to the topic. The ARN is displayed in the SNS console. You can specify the source type, and lists of Amazon Redshift source IDs, event categories, and event severities. Notifications will be sent for all events you want that match those criteria. For example, you can specify source type = cluster, source ID = my-cluster-1 and mycluster2, event categories = Availability, Backup, and severity = ERROR. The subscription will only send notifications for those ERROR events in the Availability and Backup categories for the specified clusters. If you specify both the source type and source IDs, such as source type = cluster and source identifier = my-cluster-1, notifications will be sent for all the cluster events for my-cluster-1. If you specify a source type but do not specify a source identifier, you will receive notice of the events for the objects of that type in your AWS account. If you do not specify either the SourceType nor the SourceIdentifier, you will be notified of events generated from all Amazon Redshift sources belonging to your AWS account. You must specify a source type if you specify a source ID. */ createEventSubscription(callback?: (err: AWSError, data: Redshift.Types.CreateEventSubscriptionResult) => void): Request<Redshift.Types.CreateEventSubscriptionResult, AWSError>; /** * Creates an HSM client certificate that an Amazon Redshift cluster will use to connect to the client's HSM in order to store and retrieve the keys used to encrypt the cluster databases. The command returns a public key, which you must store in the HSM. In addition to creating the HSM certificate, you must create an Amazon Redshift HSM configuration that provides a cluster the information needed to store and use encryption keys in the HSM. For more information, go to Hardware Security Modules in the Amazon Redshift Cluster Management Guide. */ createHsmClientCertificate(params: Redshift.Types.CreateHsmClientCertificateMessage, callback?: (err: AWSError, data: Redshift.Types.CreateHsmClientCertificateResult) => void): Request<Redshift.Types.CreateHsmClientCertificateResult, AWSError>; /** * Creates an HSM client certificate that an Amazon Redshift cluster will use to connect to the client's HSM in order to store and retrieve the keys used to encrypt the cluster databases. The command returns a public key, which you must store in the HSM. In addition to creating the HSM certificate, you must create an Amazon Redshift HSM configuration that provides a cluster the information needed to store and use encryption keys in the HSM. For more information, go to Hardware Security Modules in the Amazon Redshift Cluster Management Guide. */ createHsmClientCertificate(callback?: (err: AWSError, data: Redshift.Types.CreateHsmClientCertificateResult) => void): Request<Redshift.Types.CreateHsmClientCertificateResult, AWSError>; /** * Creates an HSM configuration that contains the information required by an Amazon Redshift cluster to store and use database encryption keys in a Hardware Security Module (HSM). After creating the HSM configuration, you can specify it as a parameter when creating a cluster. The cluster will then store its encryption keys in the HSM. In addition to creating an HSM configuration, you must also create an HSM client certificate. For more information, go to Hardware Security Modules in the Amazon Redshift Cluster Management Guide. */ createHsmConfiguration(params: Redshift.Types.CreateHsmConfigurationMessage, callback?: (err: AWSError, data: Redshift.Types.CreateHsmConfigurationResult) => void): Request<Redshift.Types.CreateHsmConfigurationResult, AWSError>; /** * Creates an HSM configuration that contains the information required by an Amazon Redshift cluster to store and use database encryption keys in a Hardware Security Module (HSM). After creating the HSM configuration, you can specify it as a parameter when creating a cluster. The cluster will then store its encryption keys in the HSM. In addition to creating an HSM configuration, you must also create an HSM client certificate. For more information, go to Hardware Security Modules in the Amazon Redshift Cluster Management Guide. */ createHsmConfiguration(callback?: (err: AWSError, data: Redshift.Types.CreateHsmConfigurationResult) => void): Request<Redshift.Types.CreateHsmConfigurationResult, AWSError>; /** * Creates a snapshot copy grant that permits Amazon Redshift to use a customer master key (CMK) from AWS Key Management Service (AWS KMS) to encrypt copied snapshots in a destination region. For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide. */ createSnapshotCopyGrant(params: Redshift.Types.CreateSnapshotCopyGrantMessage, callback?: (err: AWSError, data: Redshift.Types.CreateSnapshotCopyGrantResult) => void): Request<Redshift.Types.CreateSnapshotCopyGrantResult, AWSError>; /** * Creates a snapshot copy grant that permits Amazon Redshift to use a customer master key (CMK) from AWS Key Management Service (AWS KMS) to encrypt copied snapshots in a destination region. For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide. */ createSnapshotCopyGrant(callback?: (err: AWSError, data: Redshift.Types.CreateSnapshotCopyGrantResult) => void): Request<Redshift.Types.CreateSnapshotCopyGrantResult, AWSError>; /** * Creates a new snapshot schedule. */ createSnapshotSchedule(params: Redshift.Types.CreateSnapshotScheduleMessage, callback?: (err: AWSError, data: Redshift.Types.SnapshotSchedule) => void): Request<Redshift.Types.SnapshotSchedule, AWSError>; /** * Creates a new snapshot schedule. */ createSnapshotSchedule(callback?: (err: AWSError, data: Redshift.Types.SnapshotSchedule) => void): Request<Redshift.Types.SnapshotSchedule, AWSError>; /** * Adds one or more tags to a specified resource. A resource can have up to 50 tags. If you try to create more than 50 tags for a resource, you will receive an error and the attempt will fail. If you specify a key that already exists for the resource, the value for that key will be updated with the new value. */ createTags(params: Redshift.Types.CreateTagsMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Adds one or more tags to a specified resource. A resource can have up to 50 tags. If you try to create more than 50 tags for a resource, you will receive an error and the attempt will fail. If you specify a key that already exists for the resource, the value for that key will be updated with the new value. */ createTags(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a previously provisioned cluster. A successful response from the web service indicates that the request was received correctly. Use DescribeClusters to monitor the status of the deletion. The delete operation cannot be canceled or reverted once submitted. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. If you want to shut down the cluster and retain it for future use, set SkipFinalClusterSnapshot to false and specify a name for FinalClusterSnapshotIdentifier. You can later restore this snapshot to resume using the cluster. If a final cluster snapshot is requested, the status of the cluster will be "final-snapshot" while the snapshot is being taken, then it's "deleting" once Amazon Redshift begins deleting the cluster. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. */ deleteCluster(params: Redshift.Types.DeleteClusterMessage, callback?: (err: AWSError, data: Redshift.Types.DeleteClusterResult) => void): Request<Redshift.Types.DeleteClusterResult, AWSError>; /** * Deletes a previously provisioned cluster. A successful response from the web service indicates that the request was received correctly. Use DescribeClusters to monitor the status of the deletion. The delete operation cannot be canceled or reverted once submitted. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. If you want to shut down the cluster and retain it for future use, set SkipFinalClusterSnapshot to false and specify a name for FinalClusterSnapshotIdentifier. You can later restore this snapshot to resume using the cluster. If a final cluster snapshot is requested, the status of the cluster will be "final-snapshot" while the snapshot is being taken, then it's "deleting" once Amazon Redshift begins deleting the cluster. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. */ deleteCluster(callback?: (err: AWSError, data: Redshift.Types.DeleteClusterResult) => void): Request<Redshift.Types.DeleteClusterResult, AWSError>; /** * Deletes a specified Amazon Redshift parameter group. You cannot delete a parameter group if it is associated with a cluster. */ deleteClusterParameterGroup(params: Redshift.Types.DeleteClusterParameterGroupMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a specified Amazon Redshift parameter group. You cannot delete a parameter group if it is associated with a cluster. */ deleteClusterParameterGroup(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes an Amazon Redshift security group. You cannot delete a security group that is associated with any clusters. You cannot delete the default security group. For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. */ deleteClusterSecurityGroup(params: Redshift.Types.DeleteClusterSecurityGroupMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes an Amazon Redshift security group. You cannot delete a security group that is associated with any clusters. You cannot delete the default security group. For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. */ deleteClusterSecurityGroup(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the specified manual snapshot. The snapshot must be in the available state, with no other users authorized to access the snapshot. Unlike automated snapshots, manual snapshots are retained even after you delete your cluster. Amazon Redshift does not delete your manual snapshots. You must delete manual snapshot explicitly to avoid getting charged. If other accounts are authorized to access the snapshot, you must revoke all of the authorizations before you can delete the snapshot. */ deleteClusterSnapshot(params: Redshift.Types.DeleteClusterSnapshotMessage, callback?: (err: AWSError, data: Redshift.Types.DeleteClusterSnapshotResult) => void): Request<Redshift.Types.DeleteClusterSnapshotResult, AWSError>; /** * Deletes the specified manual snapshot. The snapshot must be in the available state, with no other users authorized to access the snapshot. Unlike automated snapshots, manual snapshots are retained even after you delete your cluster. Amazon Redshift does not delete your manual snapshots. You must delete manual snapshot explicitly to avoid getting charged. If other accounts are authorized to access the snapshot, you must revoke all of the authorizations before you can delete the snapshot. */ deleteClusterSnapshot(callback?: (err: AWSError, data: Redshift.Types.DeleteClusterSnapshotResult) => void): Request<Redshift.Types.DeleteClusterSnapshotResult, AWSError>; /** * Deletes the specified cluster subnet group. */ deleteClusterSubnetGroup(params: Redshift.Types.DeleteClusterSubnetGroupMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the specified cluster subnet group. */ deleteClusterSubnetGroup(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes an Amazon Redshift event notification subscription. */ deleteEventSubscription(params: Redshift.Types.DeleteEventSubscriptionMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes an Amazon Redshift event notification subscription. */ deleteEventSubscription(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the specified HSM client certificate. */ deleteHsmClientCertificate(params: Redshift.Types.DeleteHsmClientCertificateMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the specified HSM client certificate. */ deleteHsmClientCertificate(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the specified Amazon Redshift HSM configuration. */ deleteHsmConfiguration(params: Redshift.Types.DeleteHsmConfigurationMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the specified Amazon Redshift HSM configuration. */ deleteHsmConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the specified snapshot copy grant. */ deleteSnapshotCopyGrant(params: Redshift.Types.DeleteSnapshotCopyGrantMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the specified snapshot copy grant. */ deleteSnapshotCopyGrant(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a snapshot schedule. */ deleteSnapshotSchedule(params: Redshift.Types.DeleteSnapshotScheduleMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a snapshot schedule. */ deleteSnapshotSchedule(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a tag or tags from a resource. You must provide the ARN of the resource from which you want to delete the tag or tags. */ deleteTags(params: Redshift.Types.DeleteTagsMessage, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a tag or tags from a resource. You must provide the ARN of the resource from which you want to delete the tag or tags. */ deleteTags(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Returns a list of attributes attached to an account */ describeAccountAttributes(params: Redshift.Types.DescribeAccountAttributesMessage, callback?: (err: AWSError, data: Redshift.Types.AccountAttributeList) => void): Request<Redshift.Types.AccountAttributeList, AWSError>; /** * Returns a list of attributes attached to an account */ describeAccountAttributes(callback?: (err: AWSError, data: Redshift.Types.AccountAttributeList) => void): Request<Redshift.Types.AccountAttributeList, AWSError>; /** * Returns an array of ClusterDbRevision objects. */ describeClusterDbRevisions(params: Redshift.Types.DescribeClusterDbRevisionsMessage, callback?: (err: AWSError, data: Redshift.Types.ClusterDbRevisionsMessage) => void): Request<Redshift.Types.ClusterDbRevisionsMessage, AWSError>; /** * Returns an array of ClusterDbRevision objects. */ describeClusterDbRevisions(callback?: (err: AWSError, data: Redshift.Types.ClusterDbRevisionsMessage) => void): Request<Redshift.Types.ClusterDbRevisionsMessage, AWSError>; /** * Returns a list of Amazon Redshift parameter groups, including parameter groups you created and the default parameter group. For each parameter group, the response includes the parameter group name, description, and parameter group family name. You can optionally specify a name to retrieve the description of a specific parameter group. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all parameter groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all parameter groups that have any combination of those values are returned. If both tag keys and values are omitted from the request, parameter groups are returned regardless of whether they have tag keys or values associated with them. */ describeClusterParameterGroups(params: Redshift.Types.DescribeClusterParameterGroupsMessage, callback?: (err: AWSError, data: Redshift.Types.ClusterParameterGroupsMessage) => void): Request<Redshift.Types.ClusterParameterGroupsMessage, AWSError>; /** * Returns a list of Amazon Redshift parameter groups, including parameter groups you created and the default parameter group. For each parameter group, the response includes the parameter group name, description, and parameter group family name. You can optionally specify a name to retrieve the description of a specific parameter group. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all parameter groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all parameter groups that have any combination of those values are returned. If both tag keys and values are omitted from the request, parameter groups are returned regardless of whether they have tag keys or values associated with them. */ describeClusterParameterGroups(callback?: (err: AWSError, data: Redshift.Types.ClusterParameterGroupsMessage) => void): Request<Redshift.Types.ClusterParameterGroupsMessage, AWSError>; /** * Returns a detailed list of parameters contained within the specified Amazon Redshift parameter group. For each parameter the response includes information such as parameter name, description, data type, value, whether the parameter value is modifiable, and so on. You can specify source filter to retrieve parameters of only specific type. For example, to retrieve parameters that were modified by a user action such as from ModifyClusterParameterGroup, you can specify source equal to user. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. */ describeClusterParameters(params: Redshift.Types.DescribeClusterParametersMessage, callback?: (err: AWSError, data: Redshift.Types.ClusterParameterGroupDetails) => void): Request<Redshift.Types.ClusterParameterGroupDetails, AWSError>; /** * Returns a detailed list of parameters contained within the specified Amazon Redshift parameter group. For each parameter the response includes information such as parameter name, description, data type, value, whether the parameter value is modifiable, and so on. You can specify source filter to retrieve parameters of only specific type. For example, to retrieve parameters that were modified by a user action such as from ModifyClusterParameterGroup, you can specify source equal to user. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. */ describeClusterParameters(callback?: (err: AWSError, data: Redshift.Types.ClusterParameterGroupDetails) => void): Request<Redshift.Types.ClusterParameterGroupDetails, AWSError>; /** * Returns information about Amazon Redshift security groups. If the name of a security group is specified, the response will contain only information about only that security group. For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all security groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all security groups that have any combination of those values are returned. If both tag keys and values are omitted from the request, security groups are returned regardless of whether they have tag keys or values associated with them. */ describeClusterSecurityGroups(params: Redshift.Types.DescribeClusterSecurityGroupsMessage, callback?: (err: AWSError, data: Redshift.Types.ClusterSecurityGroupMessage) => void): Request<Redshift.Types.ClusterSecurityGroupMessage, AWSError>; /** * Returns information about Amazon Redshift security groups. If the name of a security group is specified, the response will contain only information about only that security group. For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all security groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all security groups that have any combination of those values are returned. If both tag keys and values are omitted from the request, security groups are returned regardless of whether they have tag keys or values associated with them. */ describeClusterSecurityGroups(callback?: (err: AWSError, data: Redshift.Types.ClusterSecurityGroupMessage) => void): Request<Redshift.Types.ClusterSecurityGroupMessage, AWSError>; /** * Returns one or more snapshot objects, which contain metadata about your cluster snapshots. By default, this operation returns information about all snapshots of all clusters that are owned by you AWS customer account. No information is returned for snapshots owned by inactive AWS customer accounts. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all snapshots that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all snapshots that have any combination of those values are returned. Only snapshots that you own are returned in the response; shared snapshots are not returned with the tag key and tag value request parameters. If both tag keys and values are omitted from the request, snapshots are returned regardless of whether they have tag keys or values associated with them. */ describeClusterSnapshots(params: Redshift.Types.DescribeClusterSnapshotsMessage, callback?: (err: AWSError, data: Redshift.Types.SnapshotMessage) => void): Request<Redshift.Types.SnapshotMessage, AWSError>; /** * Returns one or more snapshot objects, which contain metadata about your cluster snapshots. By default, this operation returns information about all snapshots of all clusters that are owned by you AWS customer account. No information is returned for snapshots owned by inactive AWS customer accounts. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all snapshots that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all snapshots that have any combination of those values are returned. Only snapshots that you own are returned in the response; shared snapshots are not returned with the tag key and tag value request parameters. If both tag keys and values are omitted from the request, snapshots are returned regardless of whether they have tag keys or values associated with them. */ describeClusterSnapshots(callback?: (err: AWSError, data: Redshift.Types.SnapshotMessage) => void): Request<Redshift.Types.SnapshotMessage, AWSError>; /** * Returns one or more cluster subnet group objects, which contain metadata about your cluster subnet groups. By default, this operation returns information about all cluster subnet groups that are defined in you AWS account. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all subnet groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all subnet groups that have any combination of those values are returned. If both tag keys and values are omitted from the request, subnet groups are returned regardless of whether they have tag keys or values associated with them. */ describeClusterSubnetGroups(params: Redshift.Types.DescribeClusterSubnetGroupsMessage, callback?: (err: AWSError, data: Redshift.Types.ClusterSubnetGroupMessage) => void): Request<Redshift.Types.ClusterSubnetGroupMessage, AWSError>; /** * Returns one or more cluster subnet group objects, which contain metadata about your cluster subnet groups. By default, this operation returns information about all cluster subnet groups that are defined in you AWS account. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all subnet groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all subnet groups that have any combination of those values are returned. If both tag keys and values are omitted from the request, subnet groups are returned regardless of whether they have tag keys or values associated with them. */ describeClusterSubnetGroups(callback?: (err: AWSError, data: Redshift.Types.ClusterSubnetGroupMessage) => void): Request<Redshift.Types.ClusterSubnetGroupMessage, AWSError>; /** * Returns a list of all the available maintenance tracks. */ describeClusterTracks(params: Redshift.Types.DescribeClusterTracksMessage, callback?: (err: AWSError, data: Redshift.Types.TrackListMessage) => void): Request<Redshift.Types.TrackListMessage, AWSError>; /** * Returns a list of all the available maintenance tracks. */ describeClusterTracks(callback?: (err: AWSError, data: Redshift.Types.TrackListMessage) => void): Request<Redshift.Types.TrackListMessage, AWSError>; /** * Returns descriptions of the available Amazon Redshift cluster versions. You can call this operation even before creating any clusters to learn more about the Amazon Redshift versions. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. */ describeClusterVersions(params: Redshift.Types.DescribeClusterVersionsMessage, callback?: (err: AWSError, data: Redshift.Types.ClusterVersionsMessage) => void): Request<Redshift.Types.ClusterVersionsMessage, AWSError>; /** * Returns descriptions of the available Amazon Redshift cluster versions. You can call this operation even before creating any clusters to learn more about the Amazon Redshift versions. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. */ describeClusterVersions(callback?: (err: AWSError, data: Redshift.Types.ClusterVersionsMessage) => void): Request<Redshift.Types.ClusterVersionsMessage, AWSError>; /** * Returns properties of provisioned clusters including general cluster properties, cluster database properties, maintenance and backup properties, and security and access properties. This operation supports pagination. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all clusters that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all clusters that have any combination of those values are returned. If both tag keys and values are omitted from the request, clusters are returned regardless of whether they have tag keys or values associated with them. */ describeClusters(params: Redshift.Types.DescribeClustersMessage, callback?: (err: AWSError, data: Redshift.Types.ClustersMessage) => void): Request<Redshift.Types.ClustersMessage, AWSError>; /** * Returns properties of provisioned clusters including general cluster properties, cluster database properties, maintenance and backup properties, and security and access properties. This operation supports pagination. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all clusters that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all clusters that have any combination of those values are returned. If both tag keys and values are omitted from the request, clusters are returned regardless of whether they have tag keys or values associated with them. */ describeClusters(callback?: (err: AWSError, data: Redshift.Types.ClustersMessage) => void): Request<Redshift.Types.ClustersMessage, AWSError>; /** * Returns a list of parameter settings for the specified parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. */ describeDefaultClusterParameters(params: Redshift.Types.DescribeDefaultClusterParametersMessage, callback?: (err: AWSError, data: Redshift.Types.DescribeDefaultClusterParametersResult) => void): Request<Redshift.Types.DescribeDefaultClusterParametersResult, AWSError>; /** * Returns a list of parameter settings for the specified parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. */ describeDefaultClusterParameters(callback?: (err: AWSError, data: Redshift.Types.DescribeDefaultClusterParametersResult) => void): Request<Redshift.Types.DescribeDefaultClusterParametersResult, AWSError>; /** * Displays a list of event categories for all event source types, or for a specified source type. For a list of the event categories and source types, go to Amazon Redshift Event Notifications. */ describeEventCategories(params: Redshift.Types.DescribeEventCategoriesMessage, callback?: (err: AWSError, data: Redshift.Types.EventCategoriesMessage) => void): Request<Redshift.Types.EventCategoriesMessage, AWSError>; /** * Displays a list of event categories for all event source types, or for a specified source type. For a list of the event categories and source types, go to Amazon Redshift Event Notifications. */ describeEventCategories(callback?: (err: AWSError, data: Redshift.Types.EventCategoriesMessage) => void): Request<Redshift.Types.EventCategoriesMessage, AWSError>; /** * Lists descriptions of all the Amazon Redshift event notification subscriptions for a customer account. If you specify a subscription name, lists the description for that subscription. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all event notification subscriptions that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all subscriptions that have any combination of those values are returned. If both tag keys and values are omitted from the request, subscriptions are returned regardless of whether they have tag keys or values associated with them. */ describeEventSubscriptions(params: Redshift.Types.DescribeEventSubscriptionsMessage, callback?: (err: AWSError, data: Redshift.Types.EventSubscriptionsMessage) => void): Request<Redshift.Types.EventSubscriptionsMessage, AWSError>; /** * Lists descriptions of all the Amazon Redshift event notification subscriptions for a customer account. If you specify a subscription name, lists the description for that subscription. If you specify both tag keys and tag values in the same request, Amazon Redshift returns all event notification subscriptions that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all subscriptions that have any combination of those values are returned. If both tag keys and values are omitted from the request, subscriptions are returned regardless of whether they have tag keys or values associated with them. */ describeEventSubscriptions(callback?: (err: AWSError, data: Redshift.Types.EventSubscriptionsMessage) => void): Request<Redshift.Types.EventSubscriptionsMessage, AWSError>; /** * Returns events related to clusters, security groups, snapshots, and parameter groups for the past 14 days. Events specific to a particular cluster, security group, snapshot or parameter group can be obtained by providing the name as a parameter. By default, the past hour of events are returned. */ describeEvents(params: Redshift.Types.DescribeEventsMessage, callback?: (err: AWSError, data: Redshift.Types.EventsMessage) => void): Request<Redshift.Types.EventsMessage, AWSError>; /** * Returns events related to clusters, security groups, snapshots, and parameter groups for the past 14 days. Events specific to a par