UNPKG

ts-http-status-codes

Version:
318 lines (317 loc) 15 kB
/** * Hypertext Transfer Protocol (HTTP) response status codes. * * @see {@link https://en.wikipedia.org/wiki/List_of_HTTP_status_codes} */ /** * The server has received the request headers and the client should proceed to send the request body * (in the case of a request for which a body needs to be sent; for example, a POST request). * Sending a large request body to a server after a request has been rejected for inappropriate headers would be inefficient. * To have a server check the request's headers, a client must send Expect: 100-continue as a header in its initial request * and receive a 100 Continue status code in response before sending the body. The response 417 Expectation Failed indicates the request should not be continued. */ export declare const Continue = 100; /** * The requester has asked the server to switch protocols and the server has agreed to do so. */ export declare const SwitchingProtocols = 101; /** * A WebDAV request may contain many sub-requests involving file operations, requiring a long time to complete the request. * This code indicates that the server has received and is processing the request, but no response is available yet. * This prevents the client from timing out and assuming the request was lost. */ export declare const Processing = 102; /** * Standard response for successful HTTP requests. * The actual response will depend on the request method used. * In a GET request, the response will contain an entity corresponding to the requested resource. * In a POST request, the response will contain an entity describing or containing the result of the action. */ export declare const Ok = 200; /** * The request has been fulfilled, resulting in the creation of a new resource. */ export declare const Created = 201; /** * The request has been accepted for processing, but the processing has not been completed. * The request might or might not be eventually acted upon, and may be disallowed when processing occurs. */ export declare const Accepted = 202; /** * SINCE HTTP/1.1 * The server is a transforming proxy that received a 200 OK from its origin; * but is returning a modified version of the origin's response. */ export declare const NonAuthoritativeInformation = 203; /** * The server successfully processed the request and is not returning any content. */ export declare const NoContent = 204; /** * The server successfully processed the request, but is not returning any content. * Unlike a 204 response, this response requires that the requester reset the document view. */ export declare const ResetContent = 205; /** * The server is delivering only part of the resource (byte serving) due to a range header sent by the client. * The range header is used by HTTP clients to enable resuming of interrupted downloads; * or split a download into multiple simultaneous streams. */ export declare const PartialContent = 206; /** * The message body that follows is an XML message and can contain a number of separate response codes; * depending on how many sub-requests were made. */ export declare const MultiStatus = 207; /** * The members of a DAV binding have already been enumerated in a preceding part of the (multistatus) response; * and are not being included again. */ export declare const AlreadyReported = 208; /** * The server has fulfilled a request for the resource; * and the response is a representation of the result of one or more instance-manipulations applied to the current instance. */ export declare const ImUsed = 226; /** * Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation). * For example, this code could be used to present multiple video format options; * to list files with different filename extensions, or to suggest word-sense disambiguation. */ export declare const MultipleChoices = 300; /** * This and all future requests should be directed to the given URI. */ export declare const MovedPermanently = 301; /** * This is an example of industry practice contradicting the standard. * The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect * (the original describing phrase was "Moved Temporarily"), but popular browsers implemented 302 * with the functionality of a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and 307 * to distinguish between the two behaviours. However, some Web applications and frameworks * use the 302 status code as if it were the 303. */ export declare const Found = 302; /** * SINCE HTTP/1.1 * The response to the request can be found under another URI using a GET method. * When received in response to a POST (or PUT/DELETE), the client should presume that * the server has received the data and should issue a redirect with a separate GET message. */ export declare const SeeOther = 303; /** * Indicates that the resource has not been modified since the version specified by the request headers If-Modified-Since or If-None-Match. * In such case, there is no need to retransmit the resource since the client still has a previously-downloaded copy. */ export declare const NotModified = 304; /** * SINCE HTTP/1.1 * The requested resource is available only through a proxy, the address for which is provided in the response. * Many HTTP clients (such as Mozilla and Internet Explorer) do not correctly handle responses with this status code, primarily for security reasons. */ export declare const UseProxy = 305; /** * No longer used. Originally meant "Subsequent requests should use the specified proxy." */ export declare const SwitchProxy = 306; /** * SINCE HTTP/1.1 * In this case, the request should be repeated with another URI; however, future requests should still use the original URI. * In contrast to how 302 was historically implemented, the request method is not allowed to be changed when reissuing the original request. * For example, a POST request should be repeated using another POST request. */ export declare const TemporaryRedirect = 307; /** * The request and all future requests should be repeated using another URI. * 307 and 308 parallel the behaviors of 302 and 301, but do not allow the HTTP method to change. * So, for example, submitting a form to a permanently redirected resource may continue smoothly. */ export declare const PermanentRedirect = 308; /** * The server cannot or will not process the request due to an apparent client error * (e.g., malformed request syntax, too large size, invalid request message framing, or deceptive request routing). */ export declare const BadRequest = 400; /** * Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet * been provided. The response must include a WWW-Authenticate header field containing a challenge applicable to the * requested resource. See Basic access authentication and Digest access authentication. 401 semantically means * "unauthenticated",i.e. the user does not have the necessary credentials. */ export declare const Unauthorized = 401; /** * Reserved for future use. The original intention was that this code might be used as part of some form of digital * cash or micro payment scheme, but that has not happened, and this code is not usually used. * Google Developers API uses this status if a particular developer has exceeded the daily limit on requests. */ export declare const PaymentRequired = 402; /** * The request was valid, but the server is refusing action. * The user might not have the necessary permissions for a resource. */ export declare const Forbidden = 403; /** * The requested resource could not be found but may be available in the future. * Subsequent requests by the client are permissible. */ export declare const NotFound = 404; /** * A request method is not supported for the requested resource; * for example, a GET request on a form that requires data to be presented via POST, or a PUT request on a read-only resource. */ export declare const MethodNotAllowed = 405; /** * The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request. */ export declare const NotAcceptable = 406; /** * The client must first authenticate itself with the proxy. */ export declare const ProxyAuthenticationRequired = 407; /** * The server timed out waiting for the request. * According to HTTP specifications: * "The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time." */ export declare const RequestTimeout = 408; /** * Indicates that the request could not be processed because of conflict in the request; * such as an edit conflict between multiple simultaneous updates. */ export declare const Conflict = 409; /** * Indicates that the resource requested is no longer available and will not be available again. * This should be used when a resource has been intentionally removed and the resource should be purged. * Upon receiving a 410 status code, the client should not request the resource in the future. * Clients such as search engines should remove the resource from their indices. * Most use cases do not require clients and search engines to purge the resource, and a "404 Not Found" may be used instead. */ export declare const Gone = 410; /** * The request did not specify the length of its content, which is required by the requested resource. */ export declare const LengthRequired = 411; /** * The server does not meet one of the preconditions that the requester put on the request. */ export declare const PreconditionFailed = 412; /** * The request is larger than the server is willing or able to process. Previously called "Request Entity Too Large". */ export declare const PayloadTooLarge = 413; /** * The URI provided was too long for the server to process. Often the result of too much data being encoded as a query-string of a GET request; * in which case it should be converted to a POST request. * Called "Request-URI Too Long" previously. */ export declare const UriTooLong = 414; /** * The request entity has a media type which the server or resource does not support. * For example, the client uploads an image as image/svg+xml, but the server requires that images use a different format. */ export declare const UnsupportedMediaType = 415; /** * The client has asked for a portion of the file (byte serving), but the server cannot supply that portion. * For example, if the client asked for a part of the file that lies beyond the end of the file. * Called "Requested Range Not Satisfiable" previously. */ export declare const RangeNotSatisfiable = 416; /** * The server cannot meet the requirements of the Expect request-header field. */ export declare const ExpectationFailed = 417; /** * This code was defined in 1998 as one of the traditional IETF April Fools' jokes, in RFC 2324, Hyper Text Coffee Pot Control Protocol; * and is not expected to be implemented by actual HTTP servers. The RFC specifies this code should be returned by * teapots requested to brew coffee. This HTTP status is used as an Easter egg in some websites, including Google.com. */ export declare const IAmATeapot = 418; /** * The request was directed at a server that is not able to produce a response (for example because a connection reuse). */ export declare const MisdirectedRequest = 421; /** * The request was well-formed but was unable to be followed due to semantic errors. */ export declare const UnprocessableEntity = 422; /** * The resource that is being accessed is locked. */ export declare const Locked = 423; /** * The request failed due to failure of a previous request (e.g., a PROPPATCH). */ export declare const FailedDependency = 424; /** * The client should switch to a different protocol such as TLS/1.0, given in the Upgrade header field. */ export declare const UpgradeRequired = 426; /** * The origin server requires the request to be conditional. * Intended to prevent "the 'lost update' problem, where a client * GETs a resource's state, modifies it, and PUTs it back to the server; * when meanwhile a third party has modified the state on the server, leading to a conflict." */ export declare const PreconditionRequired = 428; /** * The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes. */ export declare const TooManyRequests = 429; /** * The server is unwilling to process the request because either an individual header field; * or all the header fields collectively, are too large. */ export declare const RequestHeaderFieldsTooLarge = 431; /** * A server operator has received a legal demand to deny access to a resource or to a set of resources * that includes the requested resource. The code 451 was chosen as a reference to the novel Fahrenheit 451. */ export declare const UnavailableForLegalReasons = 451; /** * A generic error message, given when an unexpected condition was encountered and no more specific message is suitable. */ export declare const InternalServerError = 500; /** * The server either does not recognize the request method, or it lacks the ability to fulfill the request. * Usually this implies future availability (e.g., a new feature of a web-service API). */ export declare const NotImplemented = 501; /** * The server was acting as a gateway or proxy and received an invalid response from the upstream server. */ export declare const BadGateway = 502; /** * The server is currently unavailable (because it is overloaded or down for maintenance). * Generally, this is a temporary state. */ export declare const ServiceUnavailable = 503; /** * The server was acting as a gateway or proxy and did not receive a timely response from the upstream server. */ export declare const GatewayTimeout = 504; /** * The server does not support the HTTP protocol version used in the request */ export declare const HttpVersionNotSupported = 505; /** * Transparent content negotiation for the request results in a circular reference. */ export declare const VariantAlsoNegotiates = 506; /** * The server is unable to store the representation needed to complete the request. */ export declare const InsufficientStorage = 507; /** * The server detected an infinite loop while processing the request. */ export declare const LoopDetected = 508; /** * Further extensions to the request are required for the server to fulfill it. */ export declare const NotExtended = 510; /** * The client needs to authenticate to gain network access. * Intended for use by intercepting proxies used to control access to the network (e.g., "captive portals" used * to require agreement to Terms of Service before granting full Internet access via a Wi-Fi hotspot). */ export declare const NetworkAuthenticationRequired = 511;