tencentcloud-sdk-nodejs-intl-en/tencentcloud/cdn/v20180606/cdn_client.js

腾讯云 API NODEJS SDK

/*
 * Copyright (c) 2018 Tencent. All Rights Reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 */
const models = require("./models");
const AbstractClient = require('../../common/abstract_client')
const DescribeCdnDomainLogsResponse = models.DescribeCdnDomainLogsResponse;
const AdvancedAuthentication = models.AdvancedAuthentication;
const AdvanceHttps = models.AdvanceHttps;
const Revalidate = models.Revalidate;
const ResourceData = models.ResourceData;
const UserAgentFilter = models.UserAgentFilter;
const OthersPrivateAccess = models.OthersPrivateAccess;
const DescribePushQuotaResponse = models.DescribePushQuotaResponse;
const DescribePurgeQuotaResponse = models.DescribePurgeQuotaResponse;
const Authentication = models.Authentication;
const ImageOptimization = models.ImageOptimization;
const Https = models.Https;
const RuleCache = models.RuleCache;
const DescribeCdnDomainLogsRequest = models.DescribeCdnDomainLogsRequest;
const AvifAdapter = models.AvifAdapter;
const CreateClsLogTopicResponse = models.CreateClsLogTopicResponse;
const MaxAgeCodeRule = models.MaxAgeCodeRule;
const Compression = models.Compression;
const PurgePathCacheResponse = models.PurgePathCacheResponse;
const DomainFilter = models.DomainFilter;
const ParamFilter = models.ParamFilter;
const SpecificConfig = models.SpecificConfig;
const FollowRedirect = models.FollowRedirect;
const RequestHeader = models.RequestHeader;
const DescribePurgeQuotaRequest = models.DescribePurgeQuotaRequest;
const Referer = models.Referer;
const DescribeCdnDataResponse = models.DescribeCdnDataResponse;
const EnableClsLogTopicRequest = models.EnableClsLogTopicRequest;
const CacheConfigNoCache = models.CacheConfigNoCache;
const OriginCombine = models.OriginCombine;
const DescribeCdnOriginIpResponse = models.DescribeCdnOriginIpResponse;
const DescribePayTypeResponse = models.DescribePayTypeResponse;
const PathRule = models.PathRule;
const ListTopDataRequest = models.ListTopDataRequest;
const ListClsTopicDomainsRequest = models.ListClsTopicDomainsRequest;
const DescribeDomainsResponse = models.DescribeDomainsResponse;
const DescribePayTypeRequest = models.DescribePayTypeRequest;
const AdvancedAuthenticationTypeD = models.AdvancedAuthenticationTypeD;
const CompressionRule = models.CompressionRule;
const RedirectConfig = models.RedirectConfig;
const GuetzliAdapter = models.GuetzliAdapter;
const Origin = models.Origin;
const AdvancedAuthenticationTypeF = models.AdvancedAuthenticationTypeF;
const TopData = models.TopData;
const Quota = models.Quota;
const HeaderKey = models.HeaderKey;
const DescribeBillingDataRequest = models.DescribeBillingDataRequest;
const SimpleCache = models.SimpleCache;
const DeleteClsLogTopicRequest = models.DeleteClsLogTopicRequest;
const DescribeCdnOriginIpRequest = models.DescribeCdnOriginIpRequest;
const UpdatePayTypeResponse = models.UpdatePayTypeResponse;
const TopicInfo = models.TopicInfo;
const DescribeDomainsConfigResponse = models.DescribeDomainsConfigResponse;
const BriefDomain = models.BriefDomain;
const TimestampData = models.TimestampData;
const TpgAdapter = models.TpgAdapter;
const CacheConfigCache = models.CacheConfigCache;
const DescribeReportDataResponse = models.DescribeReportDataResponse;
const DisableClsLogTopicRequest = models.DisableClsLogTopicRequest;
const RuleCacheConfig = models.RuleCacheConfig;
const ListClsTopicDomainsResponse = models.ListClsTopicDomainsResponse;
const HttpsBilling = models.HttpsBilling;
const DescribeCdnIpRequest = models.DescribeCdnIpRequest;
const Ipv6 = models.Ipv6;
const FilterRules = models.FilterRules;
const StatusCodeCache = models.StatusCodeCache;
const DescribeIpVisitResponse = models.DescribeIpVisitResponse;
const EnableClsLogTopicResponse = models.EnableClsLogTopicResponse;
const ListClsLogTopicsResponse = models.ListClsLogTopicsResponse;
const RemoteAuthenticationRule = models.RemoteAuthenticationRule;
const OverseaConfig = models.OverseaConfig;
const AddCdnDomainRequest = models.AddCdnDomainRequest;
const UserAgentFilterRule = models.UserAgentFilterRule;
const UpdateDomainConfigRequest = models.UpdateDomainConfigRequest;
const ShareCname = models.ShareCname;
const CacheConfigFollowOrigin = models.CacheConfigFollowOrigin;
const MaxAgeRule = models.MaxAgeRule;
const AdvancedAuthenticationTypeE = models.AdvancedAuthenticationTypeE;
const DescribeCertDomainsRequest = models.DescribeCertDomainsRequest;
const DescribeDomainsConfigRequest = models.DescribeDomainsConfigRequest;
const AdvancedAuthenticationTypeA = models.AdvancedAuthenticationTypeA;
const AdvancedCache = models.AdvancedCache;
const AdvancedAuthenticationTypeC = models.AdvancedAuthenticationTypeC;
const AdvancedAuthenticationTypeB = models.AdvancedAuthenticationTypeB;
const WebpAdapter = models.WebpAdapter;
const StartCdnDomainRequest = models.StartCdnDomainRequest;
const QnPrivateAccess = models.QnPrivateAccess;
const WebSocket = models.WebSocket;
const MapInfo = models.MapInfo;
const DescribeCertDomainsResponse = models.DescribeCertDomainsResponse;
const DuplicateDomainConfigRequest = models.DuplicateDomainConfigRequest;
const AuthenticationTypeD = models.AuthenticationTypeD;
const AuthenticationTypeC = models.AuthenticationTypeC;
const AuthenticationTypeB = models.AuthenticationTypeB;
const AuthenticationTypeA = models.AuthenticationTypeA;
const ResponseHeader = models.ResponseHeader;
const OriginAuthenticationTypeA = models.OriginAuthenticationTypeA;
const DescribePushTasksResponse = models.DescribePushTasksResponse;
const ResourceOriginData = models.ResourceOriginData;
const IpStatus = models.IpStatus;
const AddCdnDomainResponse = models.AddCdnDomainResponse;
const DomainAreaConfig = models.DomainAreaConfig;
const ServerCert = models.ServerCert;
const AccessControlRule = models.AccessControlRule;
const HttpHeaderPathRule = models.HttpHeaderPathRule;
const AddCLSTopicDomainsResponse = models.AddCLSTopicDomainsResponse;
const SimpleCacheRule = models.SimpleCacheRule;
const DisableClsLogTopicResponse = models.DisableClsLogTopicResponse;
const DescribeIpStatusRequest = models.DescribeIpStatusRequest;
const DetailDomain = models.DetailDomain;
const RuleEngine = models.RuleEngine;
const Ipv6Access = models.Ipv6Access;
const HeuristicCache = models.HeuristicCache;
const DuplicateDomainConfigResponse = models.DuplicateDomainConfigResponse;
const CdnIpHistory = models.CdnIpHistory;
const SummarizedData = models.SummarizedData;
const ManageClsTopicDomainsRequest = models.ManageClsTopicDomainsRequest;
const AddCLSTopicDomainsRequest = models.AddCLSTopicDomainsRequest;
const UrlRedirectRule = models.UrlRedirectRule;
const PostSize = models.PostSize;
const Cache = models.Cache;
const ForceRedirect = models.ForceRedirect;
const DescribeOriginDataRequest = models.DescribeOriginDataRequest;
const RangeOriginPull = models.RangeOriginPull;
const ViolationUrl = models.ViolationUrl;
const SearchClsLogResponse = models.SearchClsLogResponse;
const PathBasedOriginRule = models.PathBasedOriginRule;
const PushUrlsCacheRequest = models.PushUrlsCacheRequest;
const MainlandConfig = models.MainlandConfig;
const DescribeReportDataRequest = models.DescribeReportDataRequest;
const DescribePushTasksRequest = models.DescribePushTasksRequest;
const DescribeUrlViolationsRequest = models.DescribeUrlViolationsRequest;
const RefererRule = models.RefererRule;
const IpFreqLimit = models.IpFreqLimit;
const CreateClsLogTopicRequest = models.CreateClsLogTopicRequest;
const Hsts = models.Hsts;
const OriginSni = models.OriginSni;
const StopCdnDomainRequest = models.StopCdnDomainRequest;
const DescribeMapInfoResponse = models.DescribeMapInfoResponse;
const DescribeMapInfoRequest = models.DescribeMapInfoRequest;
const RuleQueryString = models.RuleQueryString;
const DescribeIpVisitRequest = models.DescribeIpVisitRequest;
const HttpHeaderRule = models.HttpHeaderRule;
const StatusCodeCacheRule = models.StatusCodeCacheRule;
const ClientCert = models.ClientCert;
const DomainLog = models.DomainLog;
const PurgeUrlsCacheResponse = models.PurgeUrlsCacheResponse;
const DeleteClsLogTopicResponse = models.DeleteClsLogTopicResponse;
const DescribeBillingDataResponse = models.DescribeBillingDataResponse;
const SchemeKey = models.SchemeKey;
const StatisticItem = models.StatisticItem;
const RangeOriginPullRule = models.RangeOriginPullRule;
const DescribeCdnIpResponse = models.DescribeCdnIpResponse;
const AdvanceCacheRule = models.AdvanceCacheRule;
const DescribeIpStatusResponse = models.DescribeIpStatusResponse;
const AccessControl = models.AccessControl;
const CacheKey = models.CacheKey;
const UrlRedirect = models.UrlRedirect;
const DownstreamCapping = models.DownstreamCapping;
const CookieKey = models.CookieKey;
const RemoteAuthentication = models.RemoteAuthentication;
const KeyRule = models.KeyRule;
const ParamFilterRule = models.ParamFilterRule;
const CappingRule = models.CappingRule;
const PushTask = models.PushTask;
const AutoGuard = models.AutoGuard;
const ListClsLogTopicsRequest = models.ListClsLogTopicsRequest;
const Seo = models.Seo;
const BandwidthAlert = models.BandwidthAlert;
const ClsLogObject = models.ClsLogObject;
const RegionMapRelation = models.RegionMapRelation;
const PurgePathCacheRequest = models.PurgePathCacheRequest;
const ModifyDomainConfigResponse = models.ModifyDomainConfigResponse;
const Quic = models.Quic;
const CdnData = models.CdnData;
const PurgeUrlsCacheRequest = models.PurgeUrlsCacheRequest;
const OriginPullOptimization = models.OriginPullOptimization;
const ErrorPage = models.ErrorPage;
const DeleteCdnDomainRequest = models.DeleteCdnDomainRequest;
const ReportData = models.ReportData;
const StartCdnDomainResponse = models.StartCdnDomainResponse;
const DescribePushQuotaRequest = models.DescribePushQuotaRequest;
const TopDetailData = models.TopDetailData;
const ResponseHeaderCache = models.ResponseHeaderCache;
const ResourceBillingData = models.ResourceBillingData;
const Sort = models.Sort;
const DescribePurgeTasksRequest = models.DescribePurgeTasksRequest;
const HwPrivateAccess = models.HwPrivateAccess;
const CacheConfig = models.CacheConfig;
const PushUrlsCacheResponse = models.PushUrlsCacheResponse;
const StopCdnDomainResponse = models.StopCdnDomainResponse;
const QueryStringKey = models.QueryStringKey;
const ListTopDataResponse = models.ListTopDataResponse;
const MaxAge = models.MaxAge;
const UpdateDomainConfigResponse = models.UpdateDomainConfigResponse;
const OssPrivateAccess = models.OssPrivateAccess;
const LogSetInfo = models.LogSetInfo;
const SecurityConfig = models.SecurityConfig;
const SearchClsLogRequest = models.SearchClsLogRequest;
const AdvanceConfig = models.AdvanceConfig;
const AwsPrivateAccess = models.AwsPrivateAccess;
const ManageClsTopicDomainsResponse = models.ManageClsTopicDomainsResponse;
const VideoSeek = models.VideoSeek;
const Compatibility = models.Compatibility;
const ModifyDomainConfigRequest = models.ModifyDomainConfigRequest;
const Tag = models.Tag;
const ClsSearchLogs = models.ClsSearchLogs;
const DescribeUrlViolationsResponse = models.DescribeUrlViolationsResponse;
const IpFilter = models.IpFilter;
const UpdatePayTypeRequest = models.UpdatePayTypeRequest;
const DescribePurgeTasksResponse = models.DescribePurgeTasksResponse;
const OriginAuthentication = models.OriginAuthentication;
const ErrorPageRule = models.ErrorPageRule;
const DescribeOriginDataResponse = models.DescribeOriginDataResponse;
const PurgeTask = models.PurgeTask;
const OriginPullTimeout = models.OriginPullTimeout;
const DeleteCdnDomainResponse = models.DeleteCdnDomainResponse;
const OriginIp = models.OriginIp;
const CdnIp = models.CdnIp;
const DescribeCdnDataRequest = models.DescribeCdnDataRequest;
const ExtraLogset = models.ExtraLogset;
const CacheTagKey = models.CacheTagKey;
const DescribeDomainsRequest = models.DescribeDomainsRequest;
const OfflineCache = models.OfflineCache;
const HTTPHeader = models.HTTPHeader;
const IpFilterPathRule = models.IpFilterPathRule;


/**
 * cdn client
 * @class
 */
class CdnClient extends AbstractClient {

    constructor(credential, region, profile) {
        super("cdn.intl.tencentcloudapi.com", "2018-06-06", credential, region, profile);
    }
    
    /**
     * This API is used to add one or more domains to a specified log topic.
     * @param {AddCLSTopicDomainsRequest} req
     * @param {function(string, AddCLSTopicDomainsResponse):void} cb
     * @public
     */
    AddCLSTopicDomains(req, cb) {
        let resp = new AddCLSTopicDomainsResponse();
        this.request("AddCLSTopicDomains", req, resp, cb);
    }

    /**
     * This API is used to modify the configuration of a CDN acceleration domain name.
Create and bind policy Query instance Reset instance access password.
The Route field uses dot separation, with the last segment called the leaf node, while non-leaf node configurations remain unchanged.
The Value Field is serialized using json, with "update" fixed as the key. For the configuration path Value, refer to the complex type of each configuration item in the API at [UpdateDomainConfig](https://www.tencentcloud.com/document/api/228/34018). It corresponds to the nodes under the complex type of the configuration path.
This API is used for CloudAudit-related operations. The input parameters may contain sensitive information such as keys, so they will not be reported to CloudAudit.
     * @param {ModifyDomainConfigRequest} req
     * @param {function(string, ModifyDomainConfigResponse):void} cb
     * @public
     */
    ModifyDomainConfig(req, cb) {
        let resp = new ModifyDomainConfigResponse();
        this.request("ModifyDomainConfig", req, resp, cb);
    }

    /**
     * This API is used to query the IP details of edge nodes (available soon) and intermediate nodes. Note that there is a certain delay in data availability.

If you have migrated your ECDN service to CDN, you can use the [DescribeIpStatus](https://www.tencentcloud.com/document/api/228/37471).
     * @param {DescribeIpStatusRequest} req
     * @param {function(string, DescribeIpStatusResponse):void} cb
     * @public
     */
    DescribeIpStatus(req, cb) {
        let resp = new DescribeIpStatusResponse();
        this.request("DescribeIpStatus", req, resp, cb);
    }

    /**
     * This API (DescribeMapInfo) is used to query the IDs of districts or ISPs.
     * @param {DescribeMapInfoRequest} req
     * @param {function(string, DescribeMapInfoResponse):void} cb
     * @public
     */
    DescribeMapInfo(req, cb) {
        let resp = new DescribeMapInfoResponse();
        this.request("DescribeMapInfo", req, resp, cb);
    }

    /**
     * This API is used to delete a specified acceleration domain name.
     * @param {DeleteCdnDomainRequest} req
     * @param {function(string, DeleteCdnDomainResponse):void} cb
     * @public
     */
    DeleteCdnDomain(req, cb) {
        let resp = new DeleteCdnDomainResponse();
        this.request("DeleteCdnDomain", req, resp, cb);
    }

    /**
     * This API is used to query the record and progress of URL or directory purge tasks submitted via the `PurgePathCache` or `PurgeUrlsCache` APIs.
     * @param {DescribePurgeTasksRequest} req
     * @param {function(string, DescribePurgeTasksResponse):void} cb
     * @public
     */
    DescribePurgeTasks(req, cb) {
        let resp = new DescribePurgeTasksResponse();
        this.request("DescribePurgeTasks", req, resp, cb);
    }

    /**
     * This API (DescribePayType) is used to query billing information of the current account, such as billing mode and billing cycle.
     * @param {DescribePayTypeRequest} req
     * @param {function(string, DescribePayTypeResponse):void} cb
     * @public
     */
    DescribePayType(req, cb) {
        let resp = new DescribePayTypeResponse();
        this.request("DescribePayType", req, resp, cb);
    }

    /**
     * This API is used to query the complete configuration information of CDN acceleration domain names (inside and outside mainland China).
     * @param {DescribeDomainsConfigRequest} req
     * @param {function(string, DescribeDomainsConfigResponse):void} cb
     * @public
     */
    DescribeDomainsConfig(req, cb) {
        let resp = new DescribeDomainsConfigResponse();
        this.request("DescribeDomainsConfig", req, resp, cb);
    }

    /**
     * This API is used to add a CDN acceleration domain name. Up to 100 domain names can be added per minute.
     * @param {AddCdnDomainRequest} req
     * @param {function(string, AddCdnDomainResponse):void} cb
     * @public
     */
    AddCdnDomain(req, cb) {
        let resp = new AddCdnDomainResponse();
        this.request("AddCdnDomain", req, resp, cb);
    }

    /**
     * This API (DescribeIpVisit) is used to query the number of users who remain active for 5 minutes and the detailed number of daily active users.

+ Number of users who remain active for 5 minutes: Collects deduplicated statistics based on client IP addresses in the log with the 5-minute granularity.
+ Number of daily active users: Collects deduplicated statistics based on client IP addresses in the log with the 1-day granularity.
     * @param {DescribeIpVisitRequest} req
     * @param {function(string, DescribeIpVisitResponse):void} cb
     * @public
     */
    DescribeIpVisit(req, cb) {
        let resp = new DescribeIpVisitResponse();
        this.request("DescribeIpVisit", req, resp, cb);
    }

    /**
     * This API is used to query CDN real-time access monitoring data and supports the following metrics:

+ Traffic (in bytes)
+ Bandwidth (in bps)
+ Number of requests
+ Number of hit requests
+ Request hit rate (in %)
+ Hit traffic (in bytes)
+ Traffic hit rate (in %)
+ Aggregate list of 2xx status codes and the details of status codes starting with 2 (in entries)
+ Aggregate list of 3xx status codes and the details of status codes starting with 3 (in entries)
+ Aggregate list of 4xx status codes and the details of status codes starting with 4 (in entries)
+ Aggregate list of 5xx status codes and the details of status codes starting with 5 (in entries)
     * @param {DescribeCdnDataRequest} req
     * @param {function(string, DescribeCdnDataResponse):void} cb
     * @public
     */
    DescribeCdnData(req, cb) {
        let resp = new DescribeCdnDataResponse();
        this.request("DescribeCdnData", req, resp, cb);
    }

    /**
     * This API is used to query the basic configuration information of CDN acceleration domain names (inside and outside mainland China), including the project ID, service status, service type, creation time, and update time, etc.
     * @param {DescribeDomainsRequest} req
     * @param {function(string, DescribeDomainsResponse):void} cb
     * @public
     */
    DescribeDomains(req, cb) {
        let resp = new DescribeDomainsResponse();
        this.request("DescribeDomains", req, resp, cb);
    }

    /**
     * This API is used to manage the list of domain names bound to a log topic.
     * @param {ManageClsTopicDomainsRequest} req
     * @param {function(string, ManageClsTopicDomainsResponse):void} cb
     * @public
     */
    ManageClsTopicDomains(req, cb) {
        let resp = new ManageClsTopicDomainsResponse();
        this.request("ManageClsTopicDomains", req, resp, cb);
    }

    /**
     * This API is used to enable the acceleration service for a disabled domain name.
     * @param {StartCdnDomainRequest} req
     * @param {function(string, StartCdnDomainResponse):void} cb
     * @public
     */
    StartCdnDomain(req, cb) {
        let resp = new StartCdnDomainResponse();
        this.request("StartCdnDomain", req, resp, cb);
    }

    /**
     * This API is used to copy the configuration of a reference domain to a new domain name. Self-owned certificates and customization options are not currently supported.
     * @param {DuplicateDomainConfigRequest} req
     * @param {function(string, DuplicateDomainConfigResponse):void} cb
     * @public
     */
    DuplicateDomainConfig(req, cb) {
        let resp = new DuplicateDomainConfigResponse();
        this.request("DuplicateDomainConfig", req, resp, cb);
    }

    /**
     * This API is used to query the purge usage quota and daily available usage for an account.
     * @param {DescribePurgeQuotaRequest} req
     * @param {function(string, DescribePurgeQuotaResponse):void} cb
     * @public
     */
    DescribePurgeQuota(req, cb) {
        let resp = new DescribePurgeQuotaResponse();
        this.request("DescribePurgeQuota", req, resp, cb);
    }

    /**
     * This API is used to search for CLS logs. Search filters can be set to today, 24 hours (one of the last 7 days), and the last 7 days.
     * @param {SearchClsLogRequest} req
     * @param {function(string, SearchClsLogResponse):void} cb
     * @public
     */
    SearchClsLog(req, cb) {
        let resp = new SearchClsLogResponse();
        this.request("SearchClsLog", req, resp, cb);
    }

    /**
     * This API is used to suspend the acceleration service for a domain name.
Note: after the acceleration service has been suspended, requests to the cache node will return a 404 error. In order to avoid impact to your business, please move the domain name to another service before suspending the acceleration service.
     * @param {StopCdnDomainRequest} req
     * @param {function(string, StopCdnDomainResponse):void} cb
     * @public
     */
    StopCdnDomain(req, cb) {
        let resp = new StopCdnDomainResponse();
        this.request("StopCdnDomain", req, resp, cb);
    }

    /**
     * This API is used to list data sorted the following ways by using different combinations of the Metric and Filter input parameters:

+ It sorts access URLs by total traffic and total requests, and returns the top 1,000 URLs in descending order.
+ It sorts client districts by total traffic and total requests, and returns the list of districts in descending order.
+ It sorts client ISPs by total traffic and total requests, and returns the list of ISPs in descending order.
+ It sorts domain names by total traffic, peak bandwidth, total requests, average hit rate, and 2XX/3XX/4XX/5XX status codes, and returns the list of domain names in descending order.
+ It sorts domain names by total origin-pull traffic, peak origin-pull bandwidth, total origin-pull requests, average origin-pull failure rate, and 2XX/3XX/4XX/5XX origin-pull status codes, and returns the list of domain names in descending order.

Note: only data from the last 90 days will be queried.
     * @param {ListTopDataRequest} req
     * @param {function(string, ListTopDataResponse):void} cb
     * @public
     */
    ListTopData(req, cb) {
        let resp = new ListTopDataResponse();
        this.request("ListTopData", req, resp, cb);
    }

    /**
     * This API is used to query CDN real-time origin-pull monitoring data and supports the following metrics:

+ Origin-pull traffic (in bytes)
+ Origin-pull bandwidth (in bps)
+ Number of origin-pull requests
+ Number of failed origin-pull requests
+ Origin-pull failure rate (in % with two decimal digits)
+ Aggregate list of 2xx origin-pull status codes and the details of origin-pull status codes starting with 2 (in entries)
+ Aggregate list of 3xx origin-pull status codes and the details of origin-pull status codes starting with 3 (in entries)
+ Aggregate list of 4xx origin-pull status codes and the details of origin-pull status codes starting with 4 (in entries)
+ Aggregate list of 5xx origin-pull status codes and the details of origin-pull status codes starting with 5 (in entries)
     * @param {DescribeOriginDataRequest} req
     * @param {function(string, DescribeOriginDataResponse):void} cb
     * @public
     */
    DescribeOriginData(req, cb) {
        let resp = new DescribeOriginDataResponse();
        this.request("DescribeOriginData", req, resp, cb);
    }

    /**
     * This API is used to query CDN IP ownership.
This API is used to create and bind a policy. (Note: The API request frequency limit follows CDN's restriction: 200 requests/10 minutes).
     * @param {DescribeCdnIpRequest} req
     * @param {function(string, DescribeCdnIpResponse):void} cb
     * @public
     */
    DescribeCdnIp(req, cb) {
        let resp = new DescribeCdnIpResponse();
        this.request("DescribeCdnIp", req, resp, cb);
    }

    /**
     * This API is used to submit multiple directory purge tasks, which are carried out according to the acceleration region of the domain names.
By default, a maximum of 100 directories can be purged per day for acceleration regions either within or outside the Chinese mainland, and up to 500 tasks can be submitted at a time.
     * @param {PurgePathCacheRequest} req
     * @param {function(string, PurgePathCacheResponse):void} cb
     * @public
     */
    PurgePathCache(req, cb) {
        let resp = new PurgePathCacheResponse();
        this.request("PurgePathCache", req, resp, cb);
    }

    /**
     * This API is used to query the URL list with domain violations detected by the CDN system scan and their status.
This API is used to correspond to the content compliant webpage in the CDN console.
     * @param {DescribeUrlViolationsRequest} req
     * @param {function(string, DescribeUrlViolationsResponse):void} cb
     * @public
     */
    DescribeUrlViolations(req, cb) {
        let resp = new DescribeUrlViolationsResponse();
        this.request("DescribeUrlViolations", req, resp, cb);
    }

    /**
     * This API is used to submit multiple URL purge tasks, which are carried out according to the current acceleration region of the domain names in the URLs.
By default, a maximum of 10,000 URLs can be purged per day for acceleration regions either within or outside Mainland China, and up to 1,000 tasks can be submitted at a time.
     * @param {PurgeUrlsCacheRequest} req
     * @param {function(string, PurgeUrlsCacheResponse):void} cb
     * @public
     */
    PurgeUrlsCache(req, cb) {
        let resp = new PurgeUrlsCacheResponse();
        this.request("PurgeUrlsCache", req, resp, cb);
    }

    /**
     * This API is used to modify the configuration message of a CDN acceleration domain name.
Note: If you need to update a complex type configuration item, you must transmit all attributes of the entire object. Untransmitted attributes will use default values. It is recommended to pass the configuration attributes obtained from the query API after direct modification to this interface. If only modifying an individual configuration item, just pass the corresponding configuration parameter.
This API is used for CloudAudit-related operations. The input parameters may contain sensitive information such as keys, so they will not be reported to CloudAudit.
     * @param {UpdateDomainConfigRequest} req
     * @param {function(string, UpdateDomainConfigResponse):void} cb
     * @public
     */
    UpdateDomainConfig(req, cb) {
        let resp = new UpdateDomainConfigResponse();
        this.request("UpdateDomainConfig", req, resp, cb);
    }

    /**
     * This API is used to query the download link of an access log. You can use this API for access logs in the last 30 days either within or outside Mainland China.
     * @param {DescribeCdnDomainLogsRequest} req
     * @param {function(string, DescribeCdnDomainLogsResponse):void} cb
     * @public
     */
    DescribeCdnDomainLogs(req, cb) {
        let resp = new DescribeCdnDomainLogsResponse();
        this.request("DescribeCdnDomainLogs", req, resp, cb);
    }

    /**
     * This API is used to query the submission record and progress of prefetch tasks.
     * @param {DescribePushTasksRequest} req
     * @param {function(string, DescribePushTasksResponse):void} cb
     * @public
     */
    DescribePushTasks(req, cb) {
        let resp = new DescribePushTasksResponse();
        this.request("DescribePushTasks", req, resp, cb);
    }

    /**
     * This API is used to verify a SSL certificate and obtain its domain names.
     * @param {DescribeCertDomainsRequest} req
     * @param {function(string, DescribeCertDomainsResponse):void} cb
     * @public
     */
    DescribeCertDomains(req, cb) {
        let resp = new DescribeCertDomainsResponse();
        this.request("DescribeCertDomains", req, resp, cb);
    }

    /**
     * This API is used to create a log topic. Up to 10 log topics can be created under one logset.
     * @param {CreateClsLogTopicRequest} req
     * @param {function(string, CreateClsLogTopicResponse):void} cb
     * @public
     */
    CreateClsLogTopic(req, cb) {
        let resp = new CreateClsLogTopicResponse();
        this.request("CreateClsLogTopic", req, resp, cb);
    }

    /**
     * This API is used to load a list of specified URL resources to CDN nodes and supports preheating in designated acceleration regions.
By default, the daily pre-warming quota for domestic and outside the Chinese mainland is 1000 URLs each. You can submit up to 500 URLs with each submission. The number of URLs submitted will consume the total quota. For example, if you submit 500 URLs for global pre-warming, the remaining quota for domestic and outside the Chinese mainland pre-warming will be 500 URLs each. Note: For pre-warming outside the Chinese mainland, resources are loaded to edge nodes outside the Chinese mainland by default.
     * @param {PushUrlsCacheRequest} req
     * @param {function(string, PushUrlsCacheResponse):void} cb
     * @public
     */
    PushUrlsCache(req, cb) {
        let resp = new PushUrlsCacheResponse();
        this.request("PushUrlsCache", req, resp, cb);
    }

    /**
     * This API is used to stop publishing to a log topic. Note: after a log topic is disabled, all logs of the domain names bound to it will no longer be published to the topic, and the logs that have already been published will be retained. This action will take effect within 5–15 minutes.

     * @param {DisableClsLogTopicRequest} req
     * @param {function(string, DisableClsLogTopicResponse):void} cb
     * @public
     */
    DisableClsLogTopic(req, cb) {
        let resp = new DisableClsLogTopicResponse();
        this.request("DisableClsLogTopic", req, resp, cb);
    }

    /**
     * This API is used to get the list of domain names bound to a log topic.
     * @param {ListClsTopicDomainsRequest} req
     * @param {function(string, ListClsTopicDomainsResponse):void} cb
     * @public
     */
    ListClsTopicDomains(req, cb) {
        let resp = new ListClsTopicDomainsResponse();
        this.request("ListClsTopicDomains", req, resp, cb);
    }

    /**
     * This API is used to display the list of log topics. Note: a logset can contain up to 10 log topics.
     * @param {ListClsLogTopicsRequest} req
     * @param {function(string, ListClsLogTopicsResponse):void} cb
     * @public
     */
    ListClsLogTopics(req, cb) {
        let resp = new ListClsLogTopicsResponse();
        this.request("ListClsLogTopics", req, resp, cb);
    }

    /**
     * This API is used to delete a log topic. Note: when a log topic is deleted, all logs of the domain names bound to it will no longer be published to the topic, and the logs previously published to the topic will be deleted. This action will take effect within 5–15 minutes.
     * @param {DeleteClsLogTopicRequest} req
     * @param {function(string, DeleteClsLogTopicResponse):void} cb
     * @public
     */
    DeleteClsLogTopic(req, cb) {
        let resp = new DeleteClsLogTopicResponse();
        this.request("DeleteClsLogTopic", req, resp, cb);
    }

    /**
     * **This API is deprecated.**.
This API is used to query the IP information of CDN origin-pull nodes. (Note: The replace API is DescribeIpStatus.).
     * @param {DescribeCdnOriginIpRequest} req
     * @param {function(string, DescribeCdnOriginIpResponse):void} cb
     * @public
     */
    DescribeCdnOriginIp(req, cb) {
        let resp = new DescribeCdnOriginIpResponse();
        this.request("DescribeCdnOriginIp", req, resp, cb);
    }

    /**
     * This API is used to query billing data details. 
Notes: 
Due to the impact of the billing and settlement methods, the data returned by the DescribeBillingData  has a certain delay. For hourly-billed customers, the expected delay is 3 to 5 hours. For monthly-billed customers, the expected delay is 4 to 28 hours. Before 4:00 AM  (UTC+8, excluding 4:00 AM), only data from two days prior can be queried; after 4:00 AM (including 4:00 AM), data from the previous day can be queried. 
If you have a strong requirement for data timeliness, it is recommended to use the DescribeCdnData.
     * @param {DescribeBillingDataRequest} req
     * @param {function(string, DescribeBillingDataResponse):void} cb
     * @public
     */
    DescribeBillingData(req, cb) {
        let resp = new DescribeBillingDataResponse();
        this.request("DescribeBillingData", req, resp, cb);
    }

    /**
     * This API is used to query the prefetch quota and daily available usage.
     * @param {DescribePushQuotaRequest} req
     * @param {function(string, DescribePushQuotaResponse):void} cb
     * @public
     */
    DescribePushQuota(req, cb) {
        let resp = new DescribePushQuotaResponse();
        this.request("DescribePushQuota", req, resp, cb);
    }

    /**
     * This API is used to start publishing to a log topic. Note: after a log topic is enabled, all logs of the domain names bound to the topic will be published to it. This action will take effect within 5–15 minutes.
     * @param {EnableClsLogTopicRequest} req
     * @param {function(string, EnableClsLogTopicResponse):void} cb
     * @public
     */
    EnableClsLogTopic(req, cb) {
        let resp = new EnableClsLogTopicResponse();
        this.request("EnableClsLogTopic", req, resp, cb);
    }

    /**
     * This API is used to query the daily/weekly/monthly report data at domain name/project levels.
     * @param {DescribeReportDataRequest} req
     * @param {function(string, DescribeReportDataResponse):void} cb
     * @public
     */
    DescribeReportData(req, cb) {
        let resp = new DescribeReportDataResponse();
        this.request("DescribeReportData", req, resp, cb);
    }

    /**
     * This API is used to modify the billing mode of an account. At present, the billing mode of accounts on a monthly billing cycle and sub-accounts cannot be modified.
     * @param {UpdatePayTypeRequest} req
     * @param {function(string, UpdatePayTypeResponse):void} cb
     * @public
     */
    UpdatePayType(req, cb) {
        let resp = new UpdatePayTypeResponse();
        this.request("UpdatePayType", req, resp, cb);
    }


}
module.exports = CdnClient;