smart-nodes/CHANGELOG.md

Controls light, shutters and more. Includes common used logic and statistic nodes to control your home.

# Changelog

## Version 0.3.28:

- Added this changlog file.
- Separate values for shutter_complex node for up and down times.
  (Open each node and save it, to use the new times. This should be done before the version 0.4.0 is released.)
- For the following nodes you can choose to have one or two outputs (Could be a **breaking change**, please check your nodes).
    - Logic
    - Compare
    - Hysteresis

- You can now separately declare the messages that should be sent by the following nodes (Could be a **breaking change**, please check your nodes).
    - Logic
    - Compare
    - Hysteresis

- You can choose for the following nodes if they should send the result all the time or only if the result changed.
    - Logic
    - Compare
    - Hysteresis

## Version 0.3.29:

- Fixed that hysteresis sends only on change, when separate outputs are enabled.
- Added a definable short up/down time for the shutter control.
- Fixed calculation of the time from string.

## Version 0.3.30:

- Added counter example.

## Version 0.3.31:

- Fixed logic node - invert output option.

## Version 0.3.32:

- Fixed hysteresis node - always change result.

## Version 0.3.33:

- Fixed hysteresis node - init send.

## Version 0.3.34:

- Fixed hysteresis node - init send.
- Fixed light node - status.

## Version 0.3.35:

- Fixed saving last message object as a clone of the original message, because it could be changed later.

## Version 0.3.36:

- Fixed mixing-valve - call of toFixed function.

## Version 0.3.37:

- Fixed using typedInput with node-red v4.
- Started to add English translations.

## Version 0.4.0:

- Fully added English and German translations.
- Light control: Added Alarm off action
- Shutter complex control: Added Alarm off action
- Restructured the complete code
- Improved status texts
- **breaking change** (soon): Changed some node internal values. Please open and save the following node types:
    - Central node
    - Compare node
    - Counter node
    - Hysteresis node
    - Shutter complex node
    - Statistic node

    After saving the nodes, the values are automatically converted to the new one.
    This conversion will be removed in version 0.5.0.

## Version 0.4.1:

- Show only up to 2 decimal places in node status text.
- Improved warn messages shown in console.

## Version 0.4.2:

- Fixed design of property page of forwarder node.
- Corrected hysteresis to send original message.

## Version 0.4.3:

- Corrected hysteresis (again) to send original message.

## Version 0.4.4:

- Fixed the delay node to not restart the time if "only on change" option is enabled.

## Version 0.4.5:

- Fixed the status of hysteresis node.

## Version 0.4.6:

- Fixed the status of hysteresis node.

## Version 0.4.7:

- Added blink topic to light node.

## Version 0.4.8:

- Fixed reading values in heating-curve node.

## Version 0.4.9:

- Fixed reading config values for offset and slope in heating-curve node.

## Version 0.4.10:

- **breaking change** (soon): Added common and separate outputs to multi press node.
  Please open node config and save it to make sure it will work in later versions.
- Added common and separate outputs to long press node.

## Version 0.4.11:

- Fixed long press default outputs.

## Version 0.4.12:

- Fixed text exec node.

## Version 0.4.13:

- Fixed text exec node again.

## Version 0.4.14:

- Removed log outputs.

## Version 0.4.15:

- Reverted some tests.

## Version 0.4.16:

- Reverted some tests.

## Version 0.4.17:

- Fixed mixing-valve position calculation.
- Fixed up_down message for central node.

## Version 0.4.18:

- Fixed up_down message for central node.

## Version 0.4.19:

- Added min_change_time option to mixing-valve node.

## Version 0.4.20:

- Small bugfix.

## Version 0.4.21:

- Fixed up_down direction in central node..

## Version 0.4.22:

- Added set_state_inverted topic to forwarder node.

## Version 0.4.23:

- Added set_state_inverted topic to mixing-valve node.
- Added set_state_inverted topic to scheduler node.
- Changed default of save_state and resend_on_start to false for all nodes.
- Hysteresis node can now be defined by min/max values.
- Added support for percentage output for the light node.

## Version 0.4.24:

- Added set_inverted to light node.

## Version 0.4.25:

- Changed some texts.

## Version 0.4.26:

- Added possibility to control mixing-valve nodes from central node.

## Version 0.4.27:

- Fixed central node.

## Version 0.4.28:

- Added on and off topic to mixing-valve.

## Version 0.5.0:

- Improved light control percentage status text.
- Fixed logic node when common outputs is configured but one value is set to "send nothing".
- mixing-valve can now output as percentage directly or with open/close impulses.
- mixing-valve tries to guess the best position, when getting enabled.
- Added debug topic to all nodes, to see current values.
- Added new node "mode-selector".

## Version 0.5.1:

- To be more compatible, topic "set" is also possible instead of "set_state". Same for "set_inverted" instead of "set_state_inverted".

## Version 0.5.2:

- Added alarm mode to mixing-valve.

## Version 0.6.0:

- Reduced amount of messages sent by light node when it is in alarm mode.
- Fixed forwarder node causing an error when no topic was sent.
- Added Jest example for all nodes to be able to debug nodes in vscode.

## Version 0.6.1:

- Removed some ui limits of mixing-valve.

## Version 0.6.2:

- Cached runtime config is revoked now, when new settings are applied in the web frontend.
- Removed feature from mixing-valve to automatically start with the best known position, because it hadn't worked as expected.

## Version 0.6.3:

- Fixed bug, when disabling mixing-valve while it is opening, the off mode close was not handled. Same for closing and off mode open.

## Version 0.6.4:

- Do off mode for the full time, in case the real position dismatch the known position in the node.

## Version 0.6.5:

- Fixed light alarm mode, when status changed to an invalid.

## Version 0.6.6:

- Counter can be configured in 0.1 steps. For smaller steps, use msg.payload value.
- Counter has a new topic refresh, to resend the last saved value.

## Version 0.6.7:

- Added crit temp change options to mixing-valve node.
- Added UTC time usage in scheduler node.

## Version 0.7.0:

- Added support of home assistant boolean values "on" and "off"
- BREAKING CHANGE: The forwarder node is only using set_forwarder and set_forwarder_state topics.

## Version 0.7.1:

- Small bugfix in mode-selector node.

## Version 0.7.2:

- Shutter complex node is adding a 5 seconds longer time for actions up and down, to really get to the end.
- Text exec node now understands blink and toggle for light nodes.

## Version 0.7.3:

- Added blink to scene node.