pxt-common-packages

{ "NeoPixelMode": "Different modes for RGB or RGB+W NeoPixel strips", "PhotonMode": "A determines the mode of the photon", "light": "Functions to operate colored LEDs.", "light.NeoPixelAnimation": "An animation of a NeoPixel", "light.NeoPixelAnimation.createRenderer": "Creates an animator instance", "light.NeoPixelAnimation.createRenderer|param|strip": "the strip to execute on", "light.NeoPixelStrip": "A NeoPixel strip", "light.NeoPixelStrip.brightness": "Get the brightness of the pixel strip.", "light.NeoPixelStrip.buf": "Gets the underlying color buffer for the entire strip", "light.NeoPixelStrip.buffered": "Gets a value indicated if the changes are buffered", "light.NeoPixelStrip.clear": "Turn off all pixel LEDs.", "light.NeoPixelStrip.graph": "Display a vertical bar graph based on the `value` and `high` value.\nIf `high` is 0, the chart gets adjusted automatically.", "light.NeoPixelStrip.graph|param|high": "maximum value, 0 to autoscale", "light.NeoPixelStrip.graph|param|value": "current value to plot", "light.NeoPixelStrip.length": "Get the number of pixels on the strip", "light.NeoPixelStrip.mode": "Gets the LED data layout mode", "light.NeoPixelStrip.move": "Shift LEDs forward and clear with zeros.\nYou need to call ``show`` to make the changes visible.", "light.NeoPixelStrip.move|param|offset": "number of pixels to shift forward, eg: 1", "light.NeoPixelStrip.photonFlip": "Switch the direction of the photon pulse.", "light.NeoPixelStrip.photonForward": "Move a photon effect along the pixel strip by a number of steps.", "light.NeoPixelStrip.photonForward|param|steps": "number of steps (lights) to move, eg: 1", "light.NeoPixelStrip.pixelColor": "Gets the pixel color.", "light.NeoPixelStrip.pixelColor|param|pixeloffset": "position of the NeoPixel in the strip", "light.NeoPixelStrip.range": "Create a range of pixels.", "light.NeoPixelStrip.range|param|length": "number of pixels in the range, eg: 4", "light.NeoPixelStrip.range|param|start": "offset in the NeoPixel strip to start the range", "light.NeoPixelStrip.setAll": "Set all of the pixels on the strip to one RGB color.", "light.NeoPixelStrip.setAll|param|rgb": "RGB color of the LED", "light.NeoPixelStrip.setBrightness": "Set the brightness of the strip. This flag only applies to future operation.", "light.NeoPixelStrip.setBrightness|param|brightness": "a measure of LED brightness in 0-255. eg: 20", "light.NeoPixelStrip.setBuffered": "Enables or disables automatically calling show when a change is made", "light.NeoPixelStrip.setBuffered|param|on": "call show whenever a light is modified", "light.NeoPixelStrip.setGradient": "Sets a gradient between two colors", "light.NeoPixelStrip.setGradient|param|endColor": "the end color", "light.NeoPixelStrip.setGradient|param|startColor": "the start color", "light.NeoPixelStrip.setLength": "Sets the number of LEDs on a strip", "light.NeoPixelStrip.setMode": "Sets the color mode and clears the colors.", "light.NeoPixelStrip.setMode|param|mode": "the kind of color encoding required by the programmable lights", "light.NeoPixelStrip.setPhotonMode": "Set the photon mode to pen up, pen down, or eraser.", "light.NeoPixelStrip.setPhotonMode|param|mode": "the desired mode", "light.NeoPixelStrip.setPhotonPenColor": "Set the photon color.", "light.NeoPixelStrip.setPhotonPenColor|param|color": "the color of the photon", "light.NeoPixelStrip.setPhotonPenHue": "Sets the photon hue.", "light.NeoPixelStrip.setPhotonPenHue|param|hue": "the hue of the photon color", "light.NeoPixelStrip.setPhotonPosition": "Sets the photon position to a given light index", "light.NeoPixelStrip.setPhotonPosition|param|index": "index of the light, if out of bound, the index is wrapped", "light.NeoPixelStrip.setPixelBrightness": "Sets an individual pixel brightness", "light.NeoPixelStrip.setPixelBrightness|param|index": "@param brightness ", "light.NeoPixelStrip.setPixelColor": "Set the pixel to a given color.\nYou need to call ``show`` to make the changes visible.", "light.NeoPixelStrip.setPixelColor|param|pixeloffset": "position of the NeoPixel in the strip", "light.NeoPixelStrip.setPixelWhiteLED": "Set the white brightness of a pixel in a NeoPixel strip of RGB+W LEDs.\nThis only works for RGB+W NeoPixels.", "light.NeoPixelStrip.setPixelWhiteLED|param|pixeloffset": "position of the LED in the strip", "light.NeoPixelStrip.setPixelWhiteLED|param|white": "brightness of the white LED", "light.NeoPixelStrip.show": "Make the strip show all the new changes for the pixels.", "light.NeoPixelStrip.showAnimation": "Show an animation or queue an animation in the animation queue", "light.NeoPixelStrip.showAnimationFrame": "Show a single animation frame.", "light.NeoPixelStrip.showAnimationFrame|param|animation": "the animation to run", "light.NeoPixelStrip.showAnimation|param|animation": "the animation to run", "light.NeoPixelStrip.showAnimation|param|duration": "the duration to run in milliseconds, eg: 500", "light.NeoPixelStrip.showColors": "Renders a pattern of colors on the strip", "light.NeoPixelStrip.startBrightnessTransition": "Starts a brightness transition on the strip (and cancels any other running transition)", "light.NeoPixelStrip.startBrightnessTransition|param|transition": "@param duration ", "light.NeoPixelStrip.stopAllAnimations": "Stop the current animation and any other animations ready to show.", "light.NeoPixelStrip.stopBrightnessTransition": "Stops any running brightness transition", "light._animationPicker": "An animation that can be shown on a light strip", "light._animationPicker|param|animation": "The animation type", "light.animation": "Creates a builtin animation", "light.animation|param|kind": "the type of animation", "light.clear": "Turn off all pixel LEDs on the onboard strip.", "light.colors": "Get the RGB value of a known color", "light.createAPA102Strip": "Creates a strip of colored LEDs (APA102)", "light.createNeoPixelStrip": "Creates a strip of colored LEDs (WS2812b)", "light.createStrip": "Create a new programmable light strip.", "light.createStrip|param|mode": "the light encoding mode for different LED strips, eg: NeoPixelMode.RGB_GRB", "light.createStrip|param|numleds": "number of leds in the strip, eg: 30", "light.createStrip|param|pin": "the pin where the strip is connected.", "light.defaultStrip": "Gets the default light strip", "light.fade": "Use color.fade instead", "light.fade|param|brightness": "the amount of brightness to apply to the color, eg: 128", "light.graph": "Display a vertical bar graph based on the `value` and `high` value.\nIf `high` is 0, the chart gets adjusted automatically.", "light.graph|param|high": "maximum value, 0 to autoscale", "light.graph|param|value": "current value to plot", "light.hsv": "Convert an HSV (hue, saturation, value) color to RGB", "light.hsv|param|hue": "value of the hue channel between 0 and 255. eg: 255", "light.hsv|param|sat": "value of the saturation channel between 0 and 255. eg: 255", "light.hsv|param|val": "value of the value channel between 0 and 255. eg: 255", "light.onboardStrip": "Get the onboard light strip.", "light.photonFlip": "Switch the direction of the photon pulse.", "light.photonForward": "Move a photon effect along the pixel strip by a number of steps.", "light.photonForward|param|steps": "number of steps (lights) to move, eg: 1", "light.pixelColor": "Gets the pixel color at a given offset.", "light.pixelColor|param|pixeloffset": "position of the NeoPixel in the strip", "light.pixels": "Gets the default external light strip", "light.range": "Create a range of pixels.", "light.range|param|length": "number of pixels in the range, eg: 4", "light.range|param|start": "offset in the NeoPixel strip to start the range", "light.rgb": "Converts red, green, blue channels into a RGB color", "light.rgb|param|blue": "value of the blue channel between 0 and 255. eg: 255", "light.rgb|param|green": "value of the green channel between 0 and 255. eg: 255", "light.rgb|param|red": "value of the red channel between 0 and 255. eg: 255", "light.setAll": "Set all of the pixels on the strip to one RGB color.", "light.setAll|param|rgb": "RGB color of the LED", "light.setBrightness": "Set the brightness of the strip. This flag only applies to future operation.", "light.setBrightness|param|brightness": "a measure of LED brightness in 0-255. eg: 20", "light.setGradient": "Sets a gradient between two colors", "light.setLength": "Sets the number of LEDS on the default light strip", "light.setMode": "Sets the type of RGB light on the default strip", "light.setPhotonMode": "Set the photon mode to pen up, pen down, or eraser.", "light.setPhotonMode|param|mode": "the desired mode", "light.setPhotonPenHue": "Set the photon color hue.", "light.setPhotonPenHue|param|hue": "the color hue of the photon", "light.setPhotonPosition": "Sets the photon position to a given light index", "light.setPhotonPosition|param|index": "index of the light, if out of bound, the index is wrapped", "light.setPixelColor": "Set the pixel to a given color.", "light.setPixelColor|param|color": "RGB color of the LED", "light.setPixelColor|param|pixeloffset": "position of the NeoPixel in the strip", "light.showAnimation": "Show an animation or queue an animation in the animation queue", "light.showAnimationFrame": "Show a single animation frame", "light.showAnimationFrame|param|animation": "the animation to run, eg: light.rainbowAnimation", "light.showAnimation|param|animation": "the animation to run, eg: light.rainbowAnimation", "light.showAnimation|param|duration": "the duration to run in milliseconds, eg: 500", "light.stopAllAnimations": "Stop the current animation and any other animations ready to show." }