pi-sdk/typings/globals/github-electron/index.d.ts

Pay Insights SDK

// Generated by typings
// Source: https://raw.githubusercontent.com/DefinitelyTyped/DefinitelyTyped/06a49b2445d2e1c7fdd52ef3f426ac6528d9b760/github-electron/github-electron.d.ts
declare namespace Electron {

	class EventEmitter implements NodeJS.EventEmitter {
		addListener(event: string, listener: Function): this;
		on(event: string, listener: Function): this;
		once(event: string, listener: Function): this;
		removeListener(event: string, listener: Function): this;
		removeAllListeners(event?: string): this;
		setMaxListeners(n: number): this;
		getMaxListeners(): number;
		listeners(event: string): Function[];
		emit(event: string, ...args: any[]): boolean;
		listenerCount(type: string): number;
	}

	interface Event {
		preventDefault: Function;
		sender: EventEmitter;
	}

	// https://github.com/electron/electron/blob/master/docs/api/app.md

	/**
	 * The app module is responsible for controlling the application's lifecycle.
	 */
	interface App extends NodeJS.EventEmitter {
		/**
		 * Emitted when the application has finished basic startup.
		 * On Windows and Linux, the will-finish-launching event
		 * is the same as the ready event; on OS X, this event represents
		 * the applicationWillFinishLaunching notification of NSApplication.
		 * You would usually set up listeners for the open-file and open-url events here,
		 * and start the crash reporter and auto updater.
		 *
		 * In most cases, you should just do everything in the ready event handler.
		 */
		on(event: 'will-finish-launching', listener: Function): this;
		/**
		 * Emitted when Electron has finished initialization.
		 */
		on(event: 'ready', listener: Function): this;
		/**
		 * Emitted when all windows have been closed.
		 *
		 * If you do not subscribe to this event and all windows are closed,
		 * the default behavior is to quit the app; however, if you subscribe,
		 * you control whether the app quits or not.
		 * If the user pressed Cmd + Q, or the developer called app.quit(),
		 * Electron will first try to close all the windows and then emit the will-quit event,
		 * and in this case the window-all-closed event would not be emitted.
		 */
		on(event: 'window-all-closed', listener: Function): this;
		/**
		 * Emitted before the application starts closing its windows.
		 * Calling event.preventDefault() will prevent the default behaviour, which is terminating the application.
		 */
		on(event: 'before-quit', listener: (event: Event) => void): this;
		/**
		 * Emitted when all windows have been closed and the application will quit.
		 * Calling event.preventDefault() will prevent the default behaviour, which is terminating the application.
		 */
		on(event: 'will-quit', listener: (event: Event) => void): this;
		/**
		 * Emitted when the application is quitting.
		 */
		on(event: 'quit', listener: (event: Event, exitCode: number) => void): this;
		/**
		 * Emitted when the user wants to open a file with the application.
		 * The open-file event is usually emitted when the application is already open
		 * and the OS wants to reuse the application to open the file.
		 * open-file is also emitted when a file is dropped onto the dock and the application
		 * is not yet running. Make sure to listen for the open-file event very early
		 * in your application startup to handle this case (even before the ready event is emitted).
		 *
		 * You should call event.preventDefault() if you want to handle this event.
		 *
		 * Note: This is only implemented on OS X.
		 */
		on(event: 'open-file', listener: (event: Event, url: string) => void): this;
		/**
		 * Emitted when the user wants to open a URL with the application.
		 * The URL scheme must be registered to be opened by your application.
		 *
		 * You should call event.preventDefault() if you want to handle this event.
		 *
		 * Note: This is only implemented on OS X.
		 */
		on(event: 'open-url', listener: (event: Event, url: string) => void): this;
		/**
		 * Emitted when the application is activated, which usually happens when clicks on the applications’s dock icon.
		 * Note: This is only implemented on OS X.
		 */
		on(event: 'activate', listener: Function): this;
		/**
		 * Emitted during Handoff when an activity from a different device wants to be resumed.
		 * You should call event.preventDefault() if you want to handle this event.
		 */
		on(event: 'continue-activity', listener: (event: Event, type: string, userInfo: Object) => void): this;
		/**
		 * Emitted when a browserWindow gets blurred.
		 */
		on(event: 'browser-window-blur', listener: (event: Event, browserWindow: BrowserWindow) => void): this;
		/**
		 * Emitted when a browserWindow gets focused.
		 */
		on(event: 'browser-window-focus', listener: (event: Event, browserWindow: BrowserWindow) => void): this;
		/**
		 * Emitted when a new browserWindow is created.
		 */
		on(event: 'browser-window-created', listener: (event: Event, browserWindow: BrowserWindow) => void): this;
		/**
		 * Emitted when a new webContents is created.
		 */
		on(event: 'web-contents-created', listener: (event: Event, webContents: WebContents) => void): this;
		/**
		 * Emitted when failed to verify the certificate for url, to trust the certificate
		 * you should prevent the default behavior with event.preventDefault() and call callback(true).
		 */
		on(event: 'certificate-error', listener: (event: Event,
			webContents: WebContents,
			url: string,
			error: string,
			certificate: Certificate,
			callback: (trust: boolean) => void
		) => void): this;
		/**
		 * Emitted when a client certificate is requested.
		 *
		 * The url corresponds to the navigation entry requesting the client certificate
		 * and callback needs to be called with an entry filtered from the list.
		 * Using event.preventDefault() prevents the application from using the first certificate from the store.
		 */
		on(event: 'select-client-certificate', listener: (event: Event,
			webContents: WebContents,
			url: string,
			certificateList: Certificate[],
			callback: (certificate: Certificate) => void
		) => void): this;
		/**
		 * Emitted when webContents wants to do basic auth.
		 *
		 * The default behavior is to cancel all authentications, to override this
		 * you should prevent the default behavior with event.preventDefault()
		 * and call callback(username, password) with the credentials.
		 */
		on(event: 'login', listener: (event: Event,
			webContents: WebContents,
			request: LoginRequest,
			authInfo: LoginAuthInfo,
			callback: (username: string, password: string) => void
		) => void): this;
		/**
		 * Emitted when the gpu process crashes.
		 */
		on(event: 'gpu-process-crashed', listener: Function): this;
		on(event: string, listener: Function): this;
		/**
		 * Try to close all windows. The before-quit event will first be emitted.
		 * If all windows are successfully closed, the will-quit event will be emitted
		 * and by default the application would be terminated.
		 *
		 * This method guarantees all beforeunload and unload handlers are correctly
		 * executed. It is possible that a window cancels the quitting by returning
		 * false in beforeunload handler.
		 */
		quit(): void;
		/**
		 * Exits immediately with exitCode.
		 * All windows will be closed immediately without asking user
		 * and the before-quit and will-quit events will not be emitted.
		 */
		exit(exitCode: number): void;
		/**
		 * Relaunches the app when current instance exits.
		 *
		 * By default the new instance will use the same working directory
		 * and command line arguments with current instance.
		 * When args is specified, the args will be passed as command line arguments instead.
		 * When execPath is specified, the execPath will be executed for relaunch instead of current app.
		 *
		 * Note that this method does not quit the app when executed, you have to call app.quit
		 * or app.exit after calling app.relaunch to make the app restart.
		 *
		 * When app.relaunch is called for multiple times, multiple instances
		 * will be started after current instance exited.
		 */
		relaunch(options?: {
			args?: string[],
			execPath?: string
		}): void;
		/**
		 * On Linux, focuses on the first visible window.
		 * On OS X, makes the application the active app.
		 * On Windows, focuses on the application’s first window.
		 */
		focus(): void;
		/**
		 * Hides all application windows without minimizing them.
		 * Note: This is only implemented on OS X.
		 */
		hide(): void;
		/**
		 * Shows application windows after they were hidden. Does not automatically focus them.
		 * Note: This is only implemented on OS X.
		 */
		show(): void;
		/**
		 * Returns the current application directory.
		 */
		getAppPath(): string;
		/**
		 * @returns The path to a special directory or file associated with name.
		 * On failure an Error would throw.
		 */
		getPath(name: AppPathName): string;
		/**
		 * Overrides the path to a special directory or file associated with name.
		 * If the path specifies a directory that does not exist, the directory will
		 * be created by this method. On failure an Error would throw.
		 *
		 * You can only override paths of names defined in app.getPath.
		 *
		 * By default web pages' cookies and caches will be stored under userData
		 * directory, if you want to change this location, you have to override the
		 * userData path before the ready event of app module gets emitted.
		 */
		setPath(name: AppPathName, path: string): void;
		/**
		 * @returns The version of loaded application, if no version is found in
		 * application's package.json, the version of current bundle or executable.
		 */
		getVersion(): string;
		/**
		 * @returns The current application's name, the name in package.json would be used.
		 * Usually the name field of package.json is a short lowercased name, according to
		 * the spec of npm modules. So usually you should also specify a productName field,
		 * which is your application's full capitalized name, and it will be preferred over
		 * name by Electron.
		 */
		getName(): string;
		/**
		 * Overrides the current application's name.
		 */
		setName(name: string): void;
		/**
		  * @returns The current application locale.
		  */
		getLocale(): string;
		/**
		 * Adds path to recent documents list.
		 *
		 * This list is managed by the system, on Windows you can visit the list from
		 * task bar, and on Mac you can visit it from dock menu.
		 *
		 * Note: This is only implemented on OS X and Windows.
		 */
		addRecentDocument(path: string): void;
		/**
		 * Clears the recent documents list.
		 *
		 * Note: This is only implemented on OS X and Windows.
		 */
		clearRecentDocuments(): void;
		/**
		 * Sets the current executable as the default handler for a protocol (aka URI scheme).
		 * Once registered, all links with your-protocol:// will be openend with the current executable.
		 * The whole link, including protocol, will be passed to your application as a parameter.
		 *
		 * Note: This is only implemented on OS X and Windows.
		 *       On OS X, you can only register protocols that have been added to your app's info.plist.
		 */
		setAsDefaultProtocolClient(protocol: string): void;
		/**
		 * Removes the current executable as the default handler for a protocol (aka URI scheme).
		 *
		 * Note: This is only implemented on OS X and Windows.
		 */
		removeAsDefaultProtocolClient(protocol: string): void;
		/**
		 * @returns Whether the current executable is the default handler for a protocol (aka URI scheme).
		 *
		 * Note: This is only implemented on OS X and Windows.
		 */
		isDefaultProtocolClient(protocol: string): boolean;
		/**
		 * Adds tasks to the Tasks category of JumpList on Windows.
		 *
		 * Note: This API is only available on Windows.
		 */
		setUserTasks(tasks: Task[]): void;
		/**
		 * This method makes your application a Single Instance Application instead of allowing
		 * multiple instances of your app to run, this will ensure that only a single instance
		 * of your app is running, and other instances signal this instance and exit.
		 */
		makeSingleInstance(callback: (args: string[], workingDirectory: string) => void): boolean;
		/**
		 * Releases all locks that were created by makeSingleInstance. This will allow
		 * multiple instances of the application to once again run side by side.
		 */
		releaseSingleInstance(): void;
		/**
		 * Creates an NSUserActivity and sets it as the current activity.
		 * The activity is eligible for Handoff to another device afterward.
		 *
		 * @param type Uniquely identifies the activity. Maps to NSUserActivity.activityType.
		 * @param userInfo App-specific state to store for use by another device.
		 * @param webpageURL The webpage to load in a browser if no suitable app is
		 * 					 installed on the resuming device. The scheme must be http or https.
		 *
		 * Note: This API is only available on Mac.
		 */
		setUserActivity(type: string, userInfo: Object, webpageURL?: string): void;
		/**
		 * @returns The type of the currently running activity.
		 *
		 * Note: This API is only available on Mac.
		 */
		getCurrentActivityType(): string;
		/**
		 * Changes the Application User Model ID to id.
		 */
		setAppUserModelId(id: string): void;
		/**
		 * Imports the certificate in pkcs12 format into the platform certificate store.
		 * @param callback Called with the result of import operation, a value of 0 indicates success
		 * while any other value indicates failure according to chromium net_error_list.
		 *
		 * Note: This API is only available on Linux.
		 */
		importCertificate(options: ImportCertificateOptions, callback: (result: number) => void): void;
		/**
		 * Disables hardware acceleration for current app.
		 * This method can only be called before app is ready.
		 */
		disableHardwareAcceleration(): void;
		commandLine: CommandLine;
		/**
		 * Note: This API is only available on Mac.
		 */
		dock: Dock;
	}

	type AppPathName = 'home'|'appData'|'userData'|'temp'|'exe'|'module'|'desktop'|'documents'|'downloads'|'music'|'pictures'|'videos'|'pepperFlashSystemPlugin';

	interface ImportCertificateOptions {
		/**
		 * Path for the pkcs12 file.
		 */
		certificate: string;
		/**
		 * Passphrase for the certificate.
		 */
		password: string;
	}

	interface CommandLine {
		/**
		 * Append a switch [with optional value] to Chromium's command line.
		 *
		 * Note: This will not affect process.argv, and is mainly used by developers
		 * to control some low-level Chromium behaviors.
		 */
		appendSwitch(_switch: string, value?: string|number): void;
		/**
		 * Append an argument to Chromium's command line. The argument will quoted properly.
		 *
		 * Note: This will not affect process.argv.
		 */
		appendArgument(value: string): void;
	}

	interface Dock {
		/**
		 * When critical is passed, the dock icon will bounce until either the
		 * application becomes active or the request is canceled.
		 *
		 * When informational is passed, the dock icon will bounce for one second.
		 * However, the request remains active until either the application becomes
		 * active or the request is canceled.
		 *
		 * @param type The default is informational.
		 * @returns An ID representing the request.
		 */
		bounce(type?: 'critical' | 'informational'): number;
		/**
		 * Cancel the bounce of id.
		 *
		 * Note: This API is only available on Mac.
		 */
		cancelBounce(id: number): void;
		/**
		 * Bounces the Downloads stack if the filePath is inside the Downloads folder.
		 *
		 * Note: This API is only available on Mac.
		 */
		downloadFinished(filePath: string): void;
		/**
		 * Sets the string to be displayed in the dock’s badging area.
		 *
		 * Note: This API is only available on Mac.
		 */
		setBadge(text: string): void;
		/**
		 * Returns the badge string of the dock.
		 *
		 * Note: This API is only available on Mac.
		 */
		getBadge(): string;
		/**
		 * Hides the dock icon.
		 *
		 * Note: This API is only available on Mac.
		 */
		hide(): void;
		/**
		 * Shows the dock icon.
		 *
		 * Note: This API is only available on Mac.
		 */
		show(): void;
		/**
		 * Sets the application dock menu.
		 *
		 * Note: This API is only available on Mac.
		 */
		setMenu(menu: Menu): void;
		/**
		 * Sets the image associated with this dock icon.
		 *
		 * Note: This API is only available on Mac.
		 */
		setIcon(icon: NativeImage | string): void;
	}

	interface Task {
		/**
		 * Path of the program to execute, usually you should specify process.execPath
		 * which opens current program.
		 */
		program: string;
		/**
		 * The arguments of command line when program is executed.
		 */
		arguments: string;
		/**
		 * The string to be displayed in a JumpList.
		 */
		title: string;
		/**
		 * Description of this task.
		 */
		description?: string;
		/**
		 * The absolute path to an icon to be displayed in a JumpList, it can be
		 * arbitrary resource file that contains an icon, usually you can specify
		 * process.execPath to show the icon of the program.
		 */
		iconPath: string;
		/**
		 * The icon index in the icon file. If an icon file consists of two or more
		 * icons, set this value to identify the icon. If an icon file consists of
		 * one icon, this value is 0.
		 */
		iconIndex?: number;
	}

	// https://github.com/electron/electron/blob/master/docs/api/auto-updater.md

	/**
	 * This module provides an interface for the Squirrel auto-updater framework.
	 */
	interface AutoUpdater extends NodeJS.EventEmitter {
		/**
		 * Emitted when there is an error while updating.
		 */
		on(event: 'error', listener: (error: Error) => void): this;
		/**
		 * Emitted when checking if an update has started.
		 */
		on(event: 'checking-for-update', listener: Function): this;
		/**
		 * Emitted when there is an available update. The update is downloaded automatically.
		 */
		on(event: 'update-available', listener: Function): this;
		/**
		 * Emitted when there is no available update.
		 */
		on(event: 'update-not-available', listener: Function): this;
		/**
		 * Emitted when an update has been downloaded.
		 * Note: On Windows only releaseName is available.
		 */
		on(event: 'update-downloaded', listener: (event: Event, releaseNotes: string, releaseName: string, releaseDate: Date, updateURL: string) => void): this;
		on(event: string, listener: Function): this;
		/**
		 * Set the url and initialize the auto updater.
		 */
		setFeedURL(url: string, requestHeaders?: Headers): void;
		/**
		 * Ask the server whether there is an update, you have to call setFeedURL
		 * before using this API
		 */
		checkForUpdates(): void;
		/**
		 * Restarts the app and installs the update after it has been downloaded.
		 * It should only be called after update-downloaded has been emitted.
		 */
		quitAndInstall(): void;
	}

	// https://github.com/electron/electron/blob/master/docs/api/browser-window.md

	/**
	 * The BrowserWindow class gives you ability to create a browser window.
	 * You can also create a window without chrome by using Frameless Window API.
	 */
	class BrowserWindow extends EventEmitter {
		/**
		 * Emitted when the document changed its title,
		 * calling event.preventDefault() would prevent the native window’s title to change.
		 */
		on(event: 'page-title-updated', listener: (event: Event) => void): this;
		/**
		 * Emitted when the window is going to be closed. It’s emitted before the beforeunload
		 * and unload event of the DOM. Calling event.preventDefault() will cancel the close.
		 */
		on(event: 'close', listener: (event: Event) => void): this;
		/**
		 * Emitted when the window is closed. After you have received this event
		 * you should remove the reference to the window and avoid using it anymore.
		 */
		on(event: 'closed', listener: Function): this;
		/**
		 * Emitted when the web page becomes unresponsive.
		 */
		on(event: 'unresponsive', listener: Function): this;
		/**
		 * Emitted when the unresponsive web page becomes responsive again.
		 */
		on(event: 'responsive', listener: Function): this;
		/**
		 * Emitted when the window loses focus.
		 */
		on(event: 'blur', listener: Function): this;
		/**
		 * Emitted when the window gains focus.
		 */
		on(event: 'focus', listener: Function): this;
		/**
		 * Emitted when the window is shown.
		 */
		on(event: 'show', listener: Function): this;
		/**
		 * Emitted when the window is hidden.
		 */
		on(event: 'hide', listener: Function): this;
		/**
		 * Emitted when the web page has been rendered and window can be displayed without visual flash.
		 */
		on(event: 'ready-to-show', listener: Function): this;
		/**
		 * Emitted when window is maximized.
		 */
		on(event: 'maximize', listener: Function): this;
		/**
		 * Emitted when the window exits from maximized state.
		 */
		on(event: 'unmaximize', listener: Function): this;
		/**
		 * Emitted when the window is minimized.
		 */
		on(event: 'minimize', listener: Function): this;
		/**
		 * Emitted when the window is restored from minimized state.
		 */
		on(event: 'restore', listener: Function): this;
		/**
		 * Emitted when the window is getting resized.
		 */
		on(event: 'resize', listener: Function): this;
		/**
		 * Emitted when the window is getting moved to a new position.
		 */
		on(event: 'move', listener: Function): this;
		/**
		 * Emitted when the window enters full screen state.
		 */
		on(event: 'enter-full-screen', listener: Function): this;
		/**
		 * Emitted when the window leaves full screen state.
		 */
		on(event: 'leave-full-screen', listener: Function): this;
		/**
		 * Emitted when the window enters full screen state triggered by HTML API.
		 */
		on(event: 'enter-html-full-screen', listener: Function): this;
		/**
		 * Emitted when the window leaves full screen state triggered by HTML API.
		 */
		on(event: 'leave-html-full-screen', listener: Function): this;
		/**
		 * Emitted when an App Command is invoked. These are typically related
		 * to keyboard media keys or browser commands, as well as the "Back" /
		 * "Forward" buttons built into some mice on Windows.
		 * Note: This is only implemented on Windows.
		 */
		on(event: 'app-command', listener: (event: Event, command: string) => void): this;
		/**
		 * Emitted when scroll wheel event phase has begun.
		 * Note: This is only implemented on OS X.
		 */
		on(event: 'scroll-touch-begin', listener: Function): this;
		/**
		 * Emitted when scroll wheel event phase has ended.
		 * Note: This is only implemented on OS X.
		 */
		on(event: 'scroll-touch-end', listener: Function): this;
		/**
		 * Emitted on 3-finger swipe.
		 * Note: This is only implemented on OS X.
		 */
		on(event: 'swipe', listener: (event: Event, direction: SwipeDirection) => void): this;
		on(event: string, listener: Function): this;
		constructor(options?: BrowserWindowOptions);
		/**
		 * @returns All opened browser windows.
		 */
		static getAllWindows(): BrowserWindow[];
		/**
		 * @returns The window that is focused in this application.
		 */
		static getFocusedWindow(): BrowserWindow;
		/**
		 * Find a window according to the webContents it owns.
		 */
		static fromWebContents(webContents: WebContents): BrowserWindow;
		/**
		 * Find a window according to its ID.
		 */
		static fromId(id: number): BrowserWindow;
		/**
		 * Adds devtools extension located at path. The extension will be remembered
		 * so you only need to call this API once, this API is not for programming use.
		 * @returns The extension's name.
		 */
		static addDevToolsExtension(path: string): string;
		/**
		 * Remove a devtools extension.
		 * @param name The name of the devtools extension to remove.
		 */
		static removeDevToolsExtension(name: string): void;
		/**
		 * @returns devtools extensions.
		 */
		static getDevToolsExtensions(): DevToolsExtensions;
		/**
		 * The WebContents object this window owns, all web page related events and
		 * operations would be done via it.
		 * Note: Users should never store this object because it may become null when
		 * the renderer process (web page) has crashed.
		 */
		webContents: WebContents;
		/**
		 * Get the unique ID of this window.
		 */
		id: number;
		/**
		 * Force closing the window, the unload and beforeunload event won't be emitted
		 * for the web page, and close event would also not be emitted for this window,
		 * but it would guarantee the closed event to be emitted.
		 * You should only use this method when the renderer process (web page) has crashed.
		 */
		destroy(): void;
		/**
		 * Try to close the window, this has the same effect with user manually clicking
		 * the close button of the window. The web page may cancel the close though,
		 * see the close event.
		 */
		close(): void;
		/**
		 * Focus on the window.
		 */
		focus(): void;
		/**
		 * Remove focus on the window.
		 */
		blur(): void;
		/**
		 * @returns Whether the window is focused.
		 */
		isFocused(): boolean;
		/**
		 * Shows and gives focus to the window.
		 */
		show(): void;
		/**
		 * Shows the window but doesn't focus on it.
		 */
		showInactive(): void;
		/**
		 * Hides the window.
		 */
		hide(): void;
		/**
		 * @returns Whether the window is visible to the user.
		 */
		isVisible(): boolean;
		/**
		 * Maximizes the window.
		 */
		maximize(): void;
		/**
		 * Unmaximizes the window.
		 */
		unmaximize(): void;
		/**
		 * @returns Whether the window is maximized.
		 */
		isMaximized(): boolean;
		/**
		 * Minimizes the window. On some platforms the minimized window will be
		 * shown in the Dock.
		 */
		minimize(): void;
		/**
		 * Restores the window from minimized state to its previous state.
		 */
		restore(): void;
		/**
		 * @returns Whether the window is minimized.
		 */
		isMinimized(): boolean;
		/**
		 * Sets whether the window should be in fullscreen mode.
		 */
		setFullScreen(flag: boolean): void;
		/**
		 * @returns Whether the window is in fullscreen mode.
		 */
		isFullScreen(): boolean;
		/**
		 * This will have a window maintain an aspect ratio.
		 * The extra size allows a developer to have space, specified in pixels,
		 * not included within the aspect ratio calculations.
		 * This API already takes into account the difference between a window’s size and its content size.
		 *
		 * Note: This API is available only on OS X.
		 */
		setAspectRatio(aspectRatio: number, extraSize?: Dimension): void;
		/**
		 * Resizes and moves the window to width, height, x, y.
		 */
		setBounds(options: Rectangle, animate?: boolean): void;
		/**
		 * @returns The window's width, height, x and y values.
		 */
		getBounds(): Rectangle;
		/**
		 * Resizes the window to width and height.
		 */
		setSize(width: number, height: number, animate?: boolean): void;
		/**
		 * @returns The window's width and height.
		 */
		getSize(): number[];
		/**
		 * Resizes the window's client area (e.g. the web page) to width and height.
		 */
		setContentSize(width: number, height: number, animate?: boolean): void;
		/**
		 * @returns The window's client area's width and height.
		 */
		getContentSize(): number[];
		/**
		 * Sets the minimum size of window to width and height.
		 */
		setMinimumSize(width: number, height: number): void;
		/**
		 * @returns The window's minimum width and height.
		 */
		getMinimumSize(): number[];
		/**
		 * Sets the maximum size of window to width and height.
		 */
		setMaximumSize(width: number, height: number): void;
		/**
		 * @returns The window's maximum width and height.
		 */
		getMaximumSize(): number[];
		/**
		 * Sets whether the window can be manually resized by user.
		 */
		setResizable(resizable: boolean): void;
		/**
		 * @returns Whether the window can be manually resized by user.
		 */
		isResizable(): boolean;
		/**
		 * Sets whether the window can be moved by user. On Linux does nothing.
		 * Note: This API is available only on OS X and Windows.
		 */
		setMovable(movable: boolean): void;
		/**
		 * Note: This API is available only on OS X and Windows.
		 * @returns Whether the window can be moved by user. On Linux always returns true.
		 */
		isMovable(): boolean;
		/**
		 * Sets whether the window can be manually minimized by user. On Linux does nothing.
		 * Note: This API is available only on OS X and Windows.
		 */
		setMinimizable(minimizable: boolean): void;
		/**
		 * Note: This API is available only on OS X and Windows.
		 * @returns Whether the window can be manually minimized by user. On Linux always returns true.
		 */
		isMinimizable(): boolean;
		/**
		 * Sets whether the window can be manually maximized by user. On Linux does nothing.
		 * Note: This API is available only on OS X and Windows.
		 */
		setMaximizable(maximizable: boolean): void;
		/**
		 * Note: This API is available only on OS X and Windows.
		 * @returns Whether the window can be manually maximized by user. On Linux always returns true.
		 */
		isMaximizable(): boolean;
		/**
		 * Sets whether the maximize/zoom window button toggles fullscreen mode or maximizes the window.
		 */
		setFullScreenable(fullscreenable: boolean): void;
		/**
		 * @returns Whether the maximize/zoom window button toggles fullscreen mode or maximizes the window.
		 */
		isFullScreenable(): boolean;
		/**
		 * Sets whether the window can be manually closed by user. On Linux does nothing.
		 * Note: This API is available only on OS X and Windows.
		 */
		setClosable(closable: boolean): void;
		/**
		 * Note: This API is available only on OS X and Windows.
		 * @returns Whether the window can be manually closed by user. On Linux always returns true.
		 */
		isClosable(): boolean;
		/**
		 * Sets whether the window should show always on top of other windows. After
		 * setting this, the window is still a normal window, not a toolbox window
		 * which can not be focused on.
		 */
		setAlwaysOnTop(flag: boolean): void;
		/**
		 * @returns Whether the window is always on top of other windows.
		 */
		isAlwaysOnTop(): boolean;
		/**
		 * Moves window to the center of the screen.
		 */
		center(): void;
		/**
		 * Moves window to x and y.
		 */
		setPosition(x: number, y: number, animate?: boolean): void;
		/**
		 * @returns The window's current position.
		 */
		getPosition(): number[];
		/**
		 * Changes the title of native window to title.
		 */
		setTitle(title: string): void;
		/**
		 * Note: The title of web page can be different from the title of the native window.
		 * @returns The title of the native window.
		 */
		getTitle(): string;
		/**
		 * Changes the attachment point for sheets on Mac OS X.
		 * Note: This API is available only on OS X.
		 */
		setSheetOffset(offsetY: number, offsetX?: number): void;
		/**
		 * Starts or stops flashing the window to attract user's attention.
		 */
		flashFrame(flag: boolean): void;
		/**
		 * Makes the window do not show in Taskbar.
		 */
		setSkipTaskbar(skip: boolean): void;
		/**
		 * Enters or leaves the kiosk mode.
		 */
		setKiosk(flag: boolean): void;
		/**
		 * @returns Whether the window is in kiosk mode.
		 */
		isKiosk(): boolean;
		/**
		 * The native type of the handle is HWND on Windows, NSView* on OS X,
		 * and Window (unsigned long) on Linux.
		 * @returns The platform-specific handle of the window as Buffer.
		 */
		getNativeWindowHandle(): Buffer;
		/**
		 * Hooks a windows message. The callback is called when the message is received in the WndProc.
		 * Note: This API is available only on Windows.
		 */
		hookWindowMessage(message: number, callback: Function): void;
		/**
		 * @returns Whether the message is hooked.
		 */
		isWindowMessageHooked(message: number): boolean;
		/**
		 * Unhook the window message.
		 */
		unhookWindowMessage(message: number): void;
		/**
		 * Unhooks all of the window messages.
		 */
		unhookAllWindowMessages(): void;
		/**
		 * Sets the pathname of the file the window represents, and the icon of the
		 * file will show in window's title bar.
		 * Note: This API is available only on OS X.
		 */
		setRepresentedFilename(filename: string): void;
		/**
		 * Note: This API is available only on OS X.
		 * @returns The pathname of the file the window represents.
		 */
		getRepresentedFilename(): string;
		/**
		 * Specifies whether the window’s document has been edited, and the icon in
		 * title bar will become grey when set to true.
		 * Note: This API is available only on OS X.
		 */
		setDocumentEdited(edited: boolean): void;
		/**
		 * Note: This API is available only on OS X.
		 * @returns Whether the window's document has been edited.
		 */
		isDocumentEdited(): boolean;
		focusOnWebView(): void;
		blurWebView(): void;
		/**
		 * Captures the snapshot of page within rect, upon completion the callback
		 * will be called. Omitting the rect would capture the whole visible page.
		 * Note: Be sure to read documents on remote buffer in remote if you are going
		 * to use this API in renderer process.
		 * @param callback Supplies the image that stores data of the snapshot.
		 */
		capturePage(rect: Rectangle, callback: (image: NativeImage) => void): void;
		capturePage(callback: (image: NativeImage) => void): void;
		/**
		 * Same as webContents.loadURL(url).
		 */
		loadURL(url: string, options?: LoadURLOptions): void;
		/**
		 * Same as webContents.reload.
		 */
		reload(): void;
		/**
		 * Sets the menu as the window top menu.
		 * Note: This API is not available on OS X.
		 */
		setMenu(menu: Menu): void;
		/**
		 * Sets the progress value in the progress bar.
		 * On Linux platform, only supports Unity desktop environment, you need to
		 * specify the *.desktop file name to desktopName field in package.json.
		 * By default, it will assume app.getName().desktop.
		 * @param progress Valid range is [0, 1.0]. If < 0, the progress bar is removed.
		 * If greater than 0, it becomes indeterminate.
		 */
		setProgressBar(progress: number): void;
		/**
		 * Sets a 16px overlay onto the current Taskbar icon, usually used to convey
		 * some sort of application status or to passively notify the user.
		 * Note: This API is only available on Windows 7 or above.
		 * @param overlay The icon to display on the bottom right corner of the Taskbar
		 * icon. If this parameter is null, the overlay is cleared
		 * @param description Provided to Accessibility screen readers.
		 */
		setOverlayIcon(overlay: NativeImage, description: string): void;
		/**
		 * Sets whether the window should have a shadow. On Windows and Linux does nothing.
		 * Note: This API is available only on OS X.
		 */
		setHasShadow(hasShadow: boolean): void;
		/**
		 * Note: This API is available only on OS X.
		 * @returns whether the window has a shadow. On Windows and Linux always returns true.
		 */
		hasShadow(): boolean;
		/**
		 * Add a thumbnail toolbar with a specified set of buttons to the thumbnail image
		 * of a window in a taskbar button layout.
		 * @returns Whether the thumbnail has been added successfully.
		 */
		setThumbarButtons(buttons: ThumbarButton[]): boolean;
		/**
		 * Same as webContents.showDefinitionForSelection().
		 * Note: This API is available only on OS X.
		 */
		showDefinitionForSelection(): void;
		/**
		 * Changes window icon.
		 * Note: This API is not available on OS X.
		 */
		setIcon(icon: NativeImage): void;
		/**
		 * Sets whether the window menu bar should hide itself automatically. Once set
		 * the menu bar will only show when users press the single Alt key.
		 * If the menu bar is already visible, calling setAutoHideMenuBar(true) won't
		 * hide it immediately.
		 */
		setAutoHideMenuBar(hide: boolean): void;
		/**
		 * @returns Whether menu bar automatically hides itself.
		 */
		isMenuBarAutoHide(): boolean;
		/**
		 * Sets whether the menu bar should be visible. If the menu bar is auto-hide,
		 * users can still bring up the menu bar by pressing the single Alt key.
		 */
		setMenuBarVisibility(visibile: boolean): void;
		/**
		 * @returns Whether the menu bar is visible.
		 */
		isMenuBarVisible(): boolean;
		/**
		 * Sets whether the window should be visible on all workspaces.
		 * Note: This API does nothing on Windows.
		 */
		setVisibleOnAllWorkspaces(visible: boolean): void;
		/**
		 * Note: This API always returns false on Windows.
		 * @returns Whether the window is visible on all workspaces.
		 */
		isVisibleOnAllWorkspaces(): boolean;
		/**
		 * Makes the window ignore all mouse events.
		 *
		 * All mouse events happened in this window will be passed to the window below this window,
		 * but if this window has focus, it will still receive keyboard events.
		 */
		setIgnoreMouseEvents(ignore: boolean): void;
		/**
		 * Changes whether the window can be focused.
		 * Note: This API is available only on Windows.
		 */
		setFocusable(focusable: boolean): void;
	}

	type SwipeDirection = 'up' | 'right' | 'down' | 'left';

	type ThumbarButtonFlags = 'enabled' | 'disabled' | 'dismissonclick' | 'nobackground' | 'hidden' | 'noninteractive';

	interface ThumbarButton {
		icon: NativeImage | string;
		click: Function;
		tooltip?: string;
		flags?: ThumbarButtonFlags[];
	}

	interface DevToolsExtensions {
		[name: string]: {
			name: string;
			value: string;
		}
	}

	interface WebPreferences {
		/**
		 * Whether node integration is enabled.
		 * Default: true.
		 */
		nodeIntegration?: boolean;
		/**
		 * Specifies a script that will be loaded before other scripts run in the page.
		 * This script will always have access to node APIs no matter whether node integration is turned on or off.
		 * The value should be the absolute file path to the script.
		 * When node integration is turned off, the preload script can reintroduce
		 * Node global symbols back to the global scope.
		 */
		preload?: string;
		/**
		 * Sets the session used by the page. Instead of passing the Session object directly,
		 * you can also choose to use the partition option instead, which accepts a partition string.
		 * When both session and partition are provided, session would be preferred.
		 * Default: the default session.
		 */
		session?: Session;
		/**
		 * Sets the session used by the page according to the session’s partition string.
		 * If partition starts with persist:, the page will use a persistent session available
		 * to all pages in the app with the same partition. if there is no persist: prefix,
		 * the page will use an in-memory session. By assigning the same partition,
		 * multiple pages can share the same session.
		 * Default: the default session.
		 */
		partition?: string;
		/**
		 * The default zoom factor of the page, 3.0 represents 300%.
		 * Default: 1.0.
		 */
		zoomFactor?: number;
		/**
		 * Enables JavaScript support.
		 * Default: true.
		 */
		javascript?: boolean;
		/**
		 * When setting false, it will disable the same-origin policy (Usually using testing
		 * websites by people), and set allowDisplayingInsecureContent and allowRunningInsecureContent
		 * to true if these two options are not set by user.
		 * Default: true.
		 */
		webSecurity?: boolean;
		/**
		 * Allow an https page to display content like images from http URLs.
		 * Default: false.
		 */
		allowDisplayingInsecureContent?: boolean;
		/**
		 * Allow a https page to run JavaScript, CSS or plugins from http URLs.
		 * Default: false.
		 */
		allowRunningInsecureContent?: boolean;
		/**
		 * Enables image support.
		 * Default: true.
		 */
		images?: boolean;
		/**
		 * Make TextArea elements resizable.
		 * Default: true.
		 */
		textAreasAreResizable?: boolean;
		/**
		 * Enables WebGL support.
		 * Default: true.
		 */
		webgl?: boolean;
		/**
		 * Enables WebAudio support.
		 * Default: true.
		 */
		webaudio?: boolean;
		/**
		 * Whether plugins should be enabled.
		 * Default: false.
		 */
		plugins?: boolean;
		/**
		 * Enables Chromium’s experimental features.
		 * Default: false.
		 */
		experimentalFeatures?: boolean;
		/**
		 * Enables Chromium’s experimental canvas features.
		 * Default: false.
		 */
		experimentalCanvasFeatures?: boolean;
		/**
		 * Enables DirectWrite font rendering system on Windows.
		 * Default: true.
		 */
		directWrite?: boolean;
		/**
		 * Enables scroll bounce (rubber banding) effect on OS X.
		 * Default: false.
		 */
		scrollBounce?: boolean;
		/**
		 * A list of feature strings separated by ",", like CSSVariables,KeyboardEventKey to enable.
		 */
		blinkFeatures?: string;
		/**
		 * A list of feature strings separated by ",", like CSSVariables,KeyboardEventKey to disable.
		 */
		disableBlinkFeatures?: string;
		/**
		 * Sets the default font for the font-family.
		 */
		defaultFontFamily?: {
			/**
			 * Default: Times New Roman.
			 */
			standard?: string;
			/**
			 * Default: Times New Roman.
			 */
			serif?: string;
			/**
			 * Default: Arial.
			 */
			sansSerif?: string;
			/**
			 * Default: Courier New.
			 */
			monospace?: string;
		};
		/**
		 * Default: 16.
		 */
		defaultFontSize?: number;
		/**
		 * Default: 13.
		 */
		defaultMonospaceFontSize?: number;
		/**
		 * Default: 0.
		 */
		minimumFontSize?: number;
		/**
		 * Default: ISO-8859-1.
		 */
		defaultEncoding?: string;
		/**
		 * Whether to throttle animations and timers when the page becomes background.
		 * Default: true
		 */
		backgroundThrottling?: boolean;
	}

	interface BrowserWindowOptions extends Rectangle {
		/**
		 * Window’s width in pixels.
		 * Default: 800.
		 */
		width?: number;
		/**
		 * Window’s height in pixels.
		 * Default: 600.
		 */
		height?: number;
		/**
		 * Window’s left offset from screen.
		 * Default: center the window.
		 */
		x?: number;
		/**
		 * Window’s top offset from screen.
		 * Default: center the window.
		 */
		y?: number;
		/**
		 * The width and height would be used as web page’s size, which means
		 * the actual window’s size will include window frame’s size and be slightly larger.
		 * Default: false.
		 */
		useContentSize?: boolean;
		/**
		 * Show window in the center of the screen.
		 * Default: true
		 */
		center?: boolean;
		/**
		 * Window’s minimum width.
		 * Default: 0.
		 */
		minWidth?: number;
		/**
		 * Window’s minimum height.
		 * Default: 0.
		 */
		minHeight?: number;
		/**
		 * Window’s maximum width.
		 * Default: no limit.
		 */
		maxWidth?: number;
		/**
		 * Window’s maximum height.
		 * Default: no limit.
		 */
		maxHeight?: number;
		/**
		 * Whether window is resizable.
		 * Default: true.
		 */
		resizable?: boolean;
		/**
		 * Whether window is movable.
		 * Note: This is not implemented on Linux.
		 * Default: true.
		 */
		movable?: boolean;
		/**
		 * Whether window is minimizable.
		 * Note: This is not implemented on Linux.
		 * Default: true.
		 */
		minimizable?: boolean;
		/**
		 * Whether window is maximizable.
		 * Note: This is not implemented on Linux.
		 * Default: true.
		 */
		maximizable?: boolean;
		/**
		 * Whether window is closable.
		 * Note: This is not implemented on Linux.
		 * Default: true.
		 */
		closable?: boolean;
		/**
		 * Whether the window can be focused.
		 * On Windows setting focusable: false also implies setting skipTaskbar: true.
		 * On Linux setting focusable: false makes the window stop interacting with wm,
		 * so the window will always stay on top in all workspaces.
		 * Default: true.
		 */
		focusable?: boolean;
		/**
		 * Whether the window should always stay on top of other windows.
		 * Default: false.
		 */
		alwaysOnTop?: boolean;
		/**
		 * Whether the window should show in fullscreen.
		 * When explicitly set to false the fullscreen button will be hidden or disabled on OS X.
		 * Default: false.
		 */
		fullscreen?: boolean;
		/**
		 * Whether the window can be put into fullscreen mode.
		 * On OS X, also whether the maximize/zoom button should toggle full screen mode or maximize window.
		 * Default: true.
		 */
		fullscreenable?: boolean;
		/**
		 * Whether to show the window in taskbar.
		 * Default: false.
		 */
		skipTaskbar?: boolean;
		/**
		 * The kiosk mode.
		 * Default: false.
		 */
		kiosk?: boolean;
		/**
		 * Default window title.
		 * Default: "Electron".
		 */
		title?: string;
		/**
		 * The window icon, when omitted on Windows the executable’s icon would be used as window icon.
		 */
		icon?: NativeImage|string;
		/**
		 * Whether window should be shown when created.
		 * Default: true.
		 */
		show?: boolean;
		/**
		 * Specify false to create a Frameless Window.
		 * Default: true.
		 */
		frame?: boolean;
		/**
		 * Whether the web view accepts a single mouse-down event that simultaneously activates the window.
		 * Default: false.
		 */
		acceptFirstMouse?: boolean;
		/**
		 * Whether to hide cursor when typing.
		 * Default: false.
		 */
		disableAutoHideCursor?: boolean;
		/**
		 * Auto hide the menu bar unless the Alt key is pressed.
		 * Default: true.
		 */
		autoHideMenuBar?: boolean;
		/**
		 * Enable the window to be resized larger than screen.
		 * Default: false.
		 */
		enableLargerThanScreen?: boolean;
		/**
		 * Window’s background color as Hexadecimal value, like #66CD00 or #FFF or #80FFFFFF (alpha is supported).
		 * Default: #FFF (white).
		 */
		backgroundColor?: string;
		/**
		 * Whether window should have a shadow.
		 * Note: This is only implemented on OS X.
		 * Default: true.
		 */
		hasShadow?: boolean;
		/**
		 * Forces using dark theme for the window.
		 * Note: Only works on some GTK+3 desktop environments.
		 * Default: false.
		 */
		darkTheme?: boolean;
		/**
		 * Makes the window transparent.
		 * Default: false.
		 */
		transparent?: boolean;
		/**
		 * The type of window, default is normal window.
		 */
		type?: BrowserWindowType;
		/**
		 * The style of window title bar.
		 */
		titleBarStyle?: 'default' | 'hidden' | 'hidden-inset';
		/**
		 * Settings of web page’s features.
		 */
		webPreferences?: WebPreferences;
	}

	type BrowserWindowType = BrowserWindowTypeLinux | BrowserWindowTypeMac;
	type BrowserWindowTypeLinux = 'desktop' | 'dock' | 'toolbar' | 'splash' | 'notification';
	type BrowserWindowTypeMac = 'desktop' | 'textured';

	interface Rectangle {
		x?: number;
		y?: number;
		width?: number;
		height?: number;
	}

	// https://github.com/electron/electron/blob/master/docs/api/clipboard.md

	/**
	 * The clipboard module provides methods to perform copy and paste operations.
	 */
	interface Clipboard {
		/**
		 * @returns The contents of the clipboard as plain text.
		 */
		readText(type?: ClipboardType): string;
		/**
		 * Writes the text into the clipboard as plain text.
		 */
		writeText(text: string, type?: ClipboardType): void;
		/**
		 * @returns The contents of the clipboard as markup.
		 */
		readHTML(type?: ClipboardType): string;
		/**
		 * Writes markup to the clipboard.
		 */
		writeHTML(markup: string, type?: ClipboardType): void;
		/**
		 * @returns The contents of the clipboard as a NativeImage.
		 */
		readImage(type?: ClipboardType): NativeImage;
		/**
		 * Writes the image into the clipboard.
		 */
		writeImage(image: NativeImage, type?: ClipboardType): void;
		/**
		 * @returns The contents of the clipboard as RTF.
		 */
		readRTF(type?: ClipboardType): string;
		/**
		 * Writes the text into the clipboard in RTF.
		 */
		writeRTF(text: string, type?: ClipboardType): void;
		/**
		 * Clears everything in clipboard.
		 */
		clear(type?: ClipboardType): void;
		/**
		 * @returns Array available formats for the clipboard type.
		 */
		availableFormats(type?: ClipboardType): string[];
		/**
		 * Returns whether the clipboard supports the format of specified data.
		 * Note: This API is experimental and could be removed in future.
		 * @returns Whether the clipboard has data in the specified format.
		 */
		has(format: string, type?: ClipboardType): boolean;
		/**
		 * Reads the data in the clipboard of the specified format.
		 * Note: This API is experimental and could be removed in future.
		 */
		read(format: string, type?: ClipboardType): string | NativeImage;
		/**
		 * Writes data to the clipboard.
		 */
		write(data: {
			text?: string;
			rtf?: string;
			html?: string;
			image?: NativeImage;
		}, type?: ClipboardType): void;
	}

	type ClipboardType = '' | 'selection';

	// https://github.com/electron/electron/blob/master/docs/api/content-tracing.md

	/**
	 * The content-tracing module is used to collect tracing data generated by the underlying Chromium content module.
	 * This module does not include a web interface so you need to open chrome://tracing/
	 * in a Chrome browser and load the generated file to view the result.
	 */
	interface ContentTracing {
		/**
		 * Get a set of category groups. The category groups can change as new code paths are reached.
		 *
		 * @param callback Called once all child processes have acknowledged the getCategories request.
		 */
		getCategories(callback: (categoryGroups: string[]) => void): void;
		/**
		 * Start recording on all processes. Recording begins immediately locally and asynchronously
		 * on child processes as soon as they receive the EnableRecording request.
		 *
		 * @param callback Called once all child processes have acknowledged the startRecording request.
		 */
		startRecording(options: ContentTracingOptions, callback: Function): void;
		/**
		 * Stop recording on all processes. Child processes typically are caching trace data and
		 * only rarely flush and send trace data back to the main process. That is because it may
		 * be an expensive operation to send the trace data over IPC, and we would like to avoid
		 * much runtime overhead of tracing. So, to end tracing, we must asynchronously ask all
		 * child processes to flush any pending trace data.
		 *
		 * @param resultFilePath Trace data will be written into this file if it is not empty,
		 * or into a temporary file.
		 * @param callback Called once all child processes have acknowledged the stopRecording request.
		 */
		stopRecording(resultFilePath: string, callback: (filePath: string) => void): void;
		/**
		 * Start monitoring on all processes. Monitoring begins immediately locally and asynchronously
		 * on child processes as soon as they receive the startMonitoring request.
		 *
		 * @param callback Called once all child processes have acked to the startMonitoring request.