nodegit

* Copyright (c) 2015 Patrick Monnerat, D+H <patrick.monnerat@dh.com> * All rights reserved. * * Redistribution and use in source and binary forms, * with or without modification, are permitted provided * that the following conditions are met: * * Redistributions of source code must retain the above * copyright notice, this list of conditions and the * following disclaimer. * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * Neither the name of the copyright holder nor the names * of any other contributors may be used to endorse or * promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. /if not defined(LIBSSH2_H_) /define LIBSSH2_H_ d LIBSSH2_COPYRIGHT... d c '2004-2015 The libssh2 project and + d its contributors.' * We use underscore instead of dash when appending DEV in dev versions * just to make the BANNER define (used by src/session.c) be a valid SSH * banner. Release versions have no appended strings and may of course not * have dashes either. d LIBSSH2_VERSION... d c '@LIBSSH2_VERSION@' * The numeric version number is also available "in parts" by using these * defines: d LIBSSH2_VERSION_MAJOR... d c @LIBSSH2_VERSION_MAJOR@ d LIBSSH2_VERSION_MINOR... d c @LIBSSH2_VERSION_MINOR@ d LIBSSH2_VERSION_PATCH... d c @LIBSSH2_VERSION_PATCH@ * This is the numeric version of the libssh2 version number, meant for * easier parsing and comparions by programs. The LIBSSH2_VERSION_NUM * define will always follow this syntax: * * X'XXYYZZ' * * Where XX, YY and ZZ are the main version, release and patch numbers in * hexadecimal (using 8 bits each). All three numbers are always * represented using two digits. 1.2 would appear as "0x010200" while * version 9.11.7 appears as X'090b07'. * * This 6-digit (24 bits) hexadecimal number does not show pre-release * number, and it is always a greater number in a more recent release. It * makes comparisons with greater than and less than work. d LIBSSH2_VERSION_NUM... d c X'@LIBSSH2_VERSION_NUM@' * This is the date and time when the full source package was created. The * timestamp is not stored in the source code repo, as the timestamp is * properly set in the tarballs by the maketgz script. * * The format of the date should follow this template: * * "Mon Feb 12 11:35:33 UTC 2007" d LIBSSH2_TIMESTAMP... d c '@LIBSSH2_TIMESTAMP@' d libssh2_Cchar s 3i 0 based(######typedef######) d libssh2_Cuchar s 3u 0 based(######typedef######) d libssh2_Cshort s 5i 0 based(######typedef######) d libssh2_Cushort... d s 5u 0 based(######typedef######) d libssh2_Cint s 10i 0 based(######typedef######) d libssh2_CuInt s 10u 0 based(######typedef######) d libssh2_Clong s 10i 0 based(######typedef######) d libssh2_Culong s 10u 0 based(######typedef######) d libssh2_Clonglong... d s 20i 0 based(######typedef######) d libssh2_Culonglong... d s 20u 0 based(######typedef######) d libssh2_Cenum s 10i 0 based(######typedef######) d libssh2_Cssize_t... d s 10i 0 based(######typedef######) d libssh2_Csize_t... d s 10u 0 based(######typedef######) d libssh2_Cfloat s 4f based(######typedef######) d libssh2_Cdouble... d s 8f based(######typedef######) d libssh2_uint8_t... d s 3u 0 based(######typedef######) d libssh2_uint32_t... d s 10u 0 based(######typedef######) d libssh2_uint64_t... d s 20u 0 based(######typedef######) d libssh2_int64_t... d s 20i 0 based(######typedef######) d libssh2_socket_t... d s 10i 0 based(######typedef######) d LIBSSH2_INVALID_SOCKET... d c -1 d libssh2_mode_t s 10u 0 based(######typedef######) d libssh2_ino_t s 10u 0 based(######typedef######) d libssh2_uid_t s 10u 0 based(######typedef######) d libssh2_gid_t s 10u 0 based(######typedef######) d libssh2_dev_t s 10u 0 based(######typedef######) d libssh2_off_t s 20i 0 based(######typedef######) Use *IFS64IO d libssh2_time_t s 10i 0 based(######typedef######) d libssh2_nlink_t... d s 5u 0 based(######typedef######) d libssh2_qp0l_objtype_t... AS400 object type d s 11 d libssh2_struct_stat_size... d s based(######typedef######) d like(libssh2_off_t) d libssh2_struct_stat... d ds based(######typedef######) d align qualified d st_mode like(libssh2_mode_t) Mode flags d st_ino like(libssh2_ino_t) File serial number d st_nlink like(libssh2_nlink_t) Number of links d st_uid like(libssh2_uid_t) Owner ID d st_gid like(libssh2_gid_t) Group ID d st_size like(libssh2_off_t) File size d st_atime like(libssh2_time_t) Last access time d st_mtime like(libssh2_time_t) Last update time d st_ctime like(libssh2_time_t) Creation time d st_dev like(libssh2_dev_t) File root device d st_blksize like(libssh2_Csize_t) Block size d st_allocsize like(libssh2_Culong) Allocation size d st_objtype like(libssh2_qp0l_objtype_t) AS400 object type d st_codepage like(libssh2_Cushort) Object data codepage d 62 Reserved d st_ino_gen_id like(libssh2_Cuint) File SN gen. ID d LIBSSH2_STRUCT_STAT_SIZE_FORMAT... d c '%lld' * Part of every banner, user specified or not. d LIBSSH2_SSH_BANNER... d c 'SSH-2.0-libssh2_1.6.1_DEV' d LIBSSH2_SSH_DEFAULT_BANNER... d c 'SSH-2.0-libssh2_1.6.1_DEV' * Default generate and safe prime sizes for * diffie-hellman-group-exchange-sha1. d LIBSSH2_DH_GEX_MINGROUP... d c 1024 d LIBSSH2_DH_GEX_OPTGROUP... d c 1536 d LIBSSH2_DH_GEX_MAXGROUP... d c 2048 * Defaults for pty requests. d LIBSSH2_TERM_WIDTH... d c 80 d LIBSSH2_TERM_HEIGHT... d c 24 d LIBSSH2_TERM_WIDTH_PX... d c 0 d LIBSSH2_TERM_HEIGHT_PX... d c 0 * 1/4 second. d LIBSSH2_SOCKET_POLL_UDELAY... d c 250000 * 0.25 * 120 == 30 seconds. d LIBSSH2_SOCKET_POLL_MAXLOOPS... d c 120 * Maximum size to allow a payload to compress to, plays it safe by * falling short of spec limits. d LIBSSH2_PACKET_MAXCOMP... d c 32000 * Maximum size to allow a payload to deccompress to, plays it safe by * allowing more than spec requires. d LIBSSH2_PACKET_MAXDECOMP... d c 40000 * Maximum size for an inbound compressed payload, plays it safe by * overshooting spec limits. d LIBSSH2_PACKET_MAXPAYLOAD... d c 40000 d LIBSSH2_USERAUTH_KBDINT_PROMPT... d ds based(######typedef######) d align qualified d text * char * d length like(libssh2_Cuint) d echo like(libssh2_Cuchar) d LIBSSH2_USERAUTH_KBDINT_RESPONSE... d ds based(######typedef######) d align qualified d text * char * d length like(libssh2_Cuint) * libssh2_session_callback_set() constants. d LIBSSH2_CALLBACK_IGNORE... d c 0 d LIBSSH2_CALLBACK_DEBUG... d c 1 d LIBSSH2_CALLBACK_DISCONNECT... d c 2 d LIBSSH2_CALLBACK_MACERROR... d c 3 d LIBSSH2_CALLBACK_X11... d c 4 d LIBSSH2_CALLBACK_SEND... d c 5 d LIBSSH2_CALLBACK_RECV... d c 6 * libssh2_session_method_pref() constants. d LIBSSH2_METHOD_KEX... d c 0 d LIBSSH2_METHOD_HOSTKEY... d c 1 d LIBSSH2_METHOD_CRYPT_CS... d c 2 d LIBSSH2_METHOD_CRYPT_SC... d c 3 d LIBSSH2_METHOD_MAC_CS... d c 4 d LIBSSH2_METHOD_MAC_SC... d c 5 d LIBSSH2_METHOD_COMP_CS... d c 6 d LIBSSH2_METHOD_COMP_SC... d c 7 d LIBSSH2_METHOD_LANG_CS... d c 8 d LIBSSH2_METHOD_LANG_SC... d c 9 * flags. d LIBSSH2_FLAG_SIGPIPE... d c X'0001' d LIBSSH2_FLAG_COMPRESS... d c X'0002' d LIBSSH2_POLLFD ds based(######typedef######) d align qualified d type like(libssh2_Cuchar) d fd * Union d socket overlay(fd) like(libssh2_socket_t) d channel * overlay(fd) LIBSSH2_CHANNEL * d listener * overlay(fd) LIBSSH2_LISTENER * d events like(libssh2_Culong) d revents like(libssh2_Culong) * Poll FD Descriptor Types. d LIBSSH2_POLLFD_SOCKET... d c 1 d LIBSSH2_POLLFD_CHANNEL... d c 2 d LIBSSH2_POLLFD_LISTENER... d c 3 * Poll FD events/revents -- Match sys/poll.h where possible. d LIBSSH2_POLLFD_POLLIN... Input data ready or d c X'0001' connection available d LIBSSH2_POLLFD_POLLPRI... Prio data ready to d c X'0002' be read. Socket only d LIBSSH2_POLLFD_POLLEXT... Ext data ready to be d c X'0002' read. Channel only d LIBSSH2_POLLFD_POLLOUT... Can may be written: d c X'0004' Socket/Channel * revents only. d LIBSSH2_POLLFD_POLLERR... Error Condition: d c X'0008' Socket d LIBSSH2_POLLFD_POLLHUP... HangUp/EOF d c X'0010' Socket d LIBSSH2_POLLFD_SESSION_CLOSED... Session Disconnect d c X'0010' d LIBSSH2_POLLFD_POLLNVAL... Invalid request d c X'0020' Socket d LIBSSH2_POLLFD_POLLEX... Exception Condition d c X'0040' Socket/Win32 d LIBSSH2_POLLFD_CHANNEL_CLOSED... Channel Disconnect d c X'0080' d LIBSSH2_POLLFD_LISTENER_CLOSED... Listener Disconnect d c X'0080' /define HAVE_LIBSSH2_SESSION_BLOCK_DIRECTION * Block Direction Types. d LIBSSH2_SESSION_BLOCK_INBOUND... d c X'0001' d LIBSSH2_SESSION_BLOCK_OUTBOUND... d c X'0002' * Hash Types. d LIBSSH2_HOSTKEY_HASH_MD5... d c 1 d LIBSSH2_HOSTKEY_HASH_SHA1... d c 2 * Hostkey Types. d LIBSSH2_HOSTKEY_TYPE_UNKNOWN... d c 0 d LIBSSH2_HOSTKEY_TYPE_RSA... d c 1 d LIBSSH2_HOSTKEY_TYPE_DSS... d c 2 * Disconnect Codes (defined by SSH protocol). d SSH_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT... d c 1 d SSH_DISCONNECT_PROTOCOL_ERROR... d c 2 d SSH_DISCONNECT_KEY_EXCHANGE_FAILED... d c 3 d SSH_DISCONNECT_RESERVED... d c 4 d SSH_DISCONNECT_MAC_ERROR... d c 5 d SSH_DISCONNECT_COMPRESSION_ERROR... d c 6 d SSH_DISCONNECT_SERVICE_NOT_AVAILABLE... d c 7 d SSH_DISCONNECT_PROTOCOL_VERSION_NOT_SUPPORTED... d c 8 d SSH_DISCONNECT_HOST_KEY_NOT_VERIFIABLE... d c 9 d SSH_DISCONNECT_CONNECTION_LOST... d c 10 d SSH_DISCONNECT_BY_APPLICATION... d c 11 d SSH_DISCONNECT_TOO_MANY_CONNECTIONS... d c 12 d SSH_DISCONNECT_AUTH_CANCELLED_BY_USER... d c 13 d SSH_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE... d c 14 d SSH_DISCONNECT_ILLEGAL_USER_NAME... d c 15 * Error Codes (defined by libssh2). d LIBSSH2_ERROR_NONE... d c 0 * The library once used -1 as a generic error return value on numerous * places through the code, which subsequently was converted to * LIBSSH2_ERROR_SOCKET_NONE uses over time. As this is a generic error * code, the goal is to never ever return this code but instead make sure * that a more accurate and descriptive error code is used. d LIBSSH2_ERROR_SOCKET_NONE... d c -1 d LIBSSH2_ERROR_BANNER_RECV... d c -2 d LIBSSH2_ERROR_BANNER_SEND... d c -3 d LIBSSH2_ERROR_INVALID_MAC... d c -4 d LIBSSH2_ERROR_KEX_FAILURE... d c -5 d LIBSSH2_ERROR_ALLOC... d c -6 d LIBSSH2_ERROR_SOCKET_SEND... d c -7 d LIBSSH2_ERROR_KEY_EXCHANGE_FAILURE... d c -8 d LIBSSH2_ERROR_TIMEOUT... d c -9 d LIBSSH2_ERROR_HOSTKEY_INIT... d c -10 d LIBSSH2_ERROR_HOSTKEY_SIGN... d c -11 d LIBSSH2_ERROR_DECRYPT... d c -12 d LIBSSH2_ERROR_SOCKET_DISCONNECT... d c -13 d LIBSSH2_ERROR_PROTO... d c -14 d LIBSSH2_ERROR_PASSWORD_EXPIRED... d c -15 d LIBSSH2_ERROR_FILE... d c -16 d LIBSSH2_ERROR_METHOD_NONE... d c -17 d LIBSSH2_ERROR_AUTHENTICATION_FAILED... d c -18 d LIBSSH2_ERROR_PUBLICKEY_UNRECOGNIZED... d c -18 d LIBSSH2_ERROR_PUBLICKEY_UNVERIFIED... d c -19 d LIBSSH2_ERROR_CHANNEL_OUTOFORDER... d c -20 d LIBSSH2_ERROR_CHANNEL_FAILURE... d c -21 d LIBSSH2_ERROR_CHANNEL_REQUEST_DENIED... d c -22 d LIBSSH2_ERROR_CHANNEL_UNKNOWN... d c -23 d LIBSSH2_ERROR_CHANNEL_WINDOW_EXCEEDED... d c -24 d LIBSSH2_ERROR_CHANNEL_PACKET_EXCEEDED... d c -25 d LIBSSH2_ERROR_CHANNEL_CLOSED... d c -26 d LIBSSH2_ERROR_CHANNEL_EOF_SENT... d c -27 d LIBSSH2_ERROR_SCP_PROTOCOL... d c -28 d LIBSSH2_ERROR_ZLIB... d c -29 d LIBSSH2_ERROR_SOCKET_TIMEOUT... d c -30 d LIBSSH2_ERROR_SFTP_PROTOCOL... d c -31 d LIBSSH2_ERROR_REQUEST_DENIED... d c -32 d LIBSSH2_ERROR_METHOD_NOT_SUPPORTED... d c -33 d LIBSSH2_ERROR_INVAL... d c -34 d LIBSSH2_ERROR_INVALID_POLL_TYPE... d c -35 d LIBSSH2_ERROR_PUBLICKEY_PROTOCOL... d c -36 d LIBSSH2_ERROR_EAGAIN... d c -37 d LIBSSH2_ERROR_BUFFER_TOO_SMALL... d c -38 d LIBSSH2_ERROR_BAD_USE... d c -39 d LIBSSH2_ERROR_COMPRESS... d c -40 d LIBSSH2_ERROR_OUT_OF_BOUNDARY... d c -41 d LIBSSH2_ERROR_AGENT_PROTOCOL... d c -42 d LIBSSH2_ERROR_SOCKET_RECV... d c -43 d LIBSSH2_ERROR_ENCRYPT... d c -44 d LIBSSH2_ERROR_BAD_SOCKET... d c -45 d LIBSSH2_ERROR_KNOWN_HOSTS... d c -46 * this is a define to provide the old (<= 1.2.7) name. d LIBSSH2_ERROR_BANNER_NONE... d c -2 * Global API. d LIBSSH2_INIT_NO_CRYPTO... d c X'0001' * libssh2_init() * * Initialize the libssh2 functions. This typically initialize the * crypto library. It uses a global state, and is not thread safe -- * you must make sure this function is not called concurrently. * * Flags can be: * 0: Normal initialize * LIBSSH2_INIT_NO_CRYPTO: Do not initialize the crypto library * (ie. OPENSSL_add_cipher_algorithms() for * OpenSSL) * * Returns 0 if succeeded, or a negative value for error. d libssh2_init pr extproc('libssh2_init') d like(libssh2_Cint) d flags value like(libssh2_Cint) * libssh2_exit() * * Exit the libssh2 functions and free's all memory used internal. d libssh2_exit pr extproc('libssh2_exit') * libssh2_free() * * Deallocate memory allocated by earlier call to libssh2 functions. d libssh2_free pr extproc('libssh2_free') d session * value LIBSSH2_SESSION * d ptr * value void * * libssh2_session_supported_algs() * * Fills algs with a list of supported cryptographic algorithms. Returns a * non-negative number (number of supported algorithms) on success or a * negative number (an eror code) on failure. * * NOTE: on success, algs must be deallocated (by calling libssh2_free) * when not needed anymore d libssh2_session_supported_algs... d pr extproc( d 'libssh2_session_supported_algs') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d method_type value like(libssh2_Cint) d algs * const char **(*) * Session API. d libssh2_session_init_ex... d pr * extproc('libssh2_session_init_ex') LIBSSH2_SESSION * d my_alloc * value procptr d my_free * value procptr d my_realloc * value procptr d abstract * value void * * Implementation of C macro. d libssh2_session_init... d pr * extproc('libssh2_session_init') LIBSSH2_SESSION * d libssh2_session_abstract... d pr * extproc('libssh2_session_abstract') void * * d session * value LIBSSH2_SESSION * d libssh2_session_callback_set... d pr * extproc( void * d 'libssh2_session_callback_set') d session * value LIBSSH2_SESSION * d cbtype value like(libssh2_Cint) d callback * value void * d libssh2_session_banner_set... d pr extproc('libssh2_session_banner_set') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d banner * value options(*string) const char * d libssh2_banner_set... d pr extproc('libssh2_banner_set') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d banner * value options(*string) const char * d libssh2_session_startup... d pr extproc('libssh2_session_startup') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d sock value like(libssh2_Cint) d libssh2_session_handshake... d pr extproc('libssh2_session_handshake') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d sock value like(libssh2_socket_t) d libssh2_session_disconnect_ex... d pr extproc( d 'libssh2_session_disconnect_ex') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d reason value like(libssh2_Cint) d description * value options(*string) const char * d lang * value options(*string) const char * * Implementation of C macro. d libssh2_session_disconnect... d pr extproc('libssh2_session_disconnect') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d description * value options(*string) const char * d libssh2_session_free... d pr extproc('libssh2_session_free') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d libssh2_hostkey_hash... d pr * extproc('libssh2_hostkey_hash') const char * d session * value LIBSSH2_SESSION * d hash_type value like(libssh2_Cint) d libssh2_session_hostkey... d pr * extproc('libssh2_session_hostkey') const char * d session * value LIBSSH2_SESSION * d len like(libssh2_Csize_t) d type like(libssh2_Cint) d libssh2_session_method_pref... d pr extproc( d 'libssh2_session_method_pref') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d method_type value like(libssh2_Cint) d prefs * value options(*string) const char * d libssh2_session_methods... d pr * extproc('libssh2_session_methods') const char * d session * value LIBSSH2_SESSION * d method_type value like(libssh2_Cint) d libssh2_session_last_error... d pr extproc('libssh2_session_last_error') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d errmsg * char *(*) d errmsg_len like(libssh2_Cint) d want_buf value like(libssh2_Cint) d libssh2_session_last_errno... d pr extproc('libssh2_session_last_errno') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d libssh2_session_set_last_error... d pr extproc( d 'libssh2_session_set_last_error') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d errcode value like(libssh2_Cint) d errmsg * value options(*string) const char * d libssh2_session_block_directions... d pr extproc( d 'libssh2_session_block_directions') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d libssh2_session_flag... d pr extproc('libssh2_session_flag') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d flag value like(libssh2_Cint) d value value like(libssh2_Cint) d libssh2_session_banner_get... d pr * extproc('libssh2_session_banner_get') const char * d session * value LIBSSH2_SESSION * * Userauth API. d libssh2_userauth_list... d pr * extproc('libssh2_userauth_list') char * d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d username_len value like(libssh2_Cuint) d libssh2_userauth_authenticated... d pr extproc( d 'libssh2_userauth_authenticated') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d libssh2_userauth_password_ex... d pr extproc( d 'libssh2_userauth_password_ex') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d username_len value like(libssh2_Cuint) d password * value options(*string) const char * d password_len value like(libssh2_Cuint) d passwd_change_cb... d * value procptr * Implementation of C macro. d libssh2_userauth_password... d pr extproc('libssh2_userauth_password') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d password * value options(*string) const char * d libssh2_userauth_publickey_fromfile_ex... d pr extproc('libssh2_userauth_publickey_- d fromfile_ex') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d username_len value like(libssh2_Cuint) d publickey * value options(*string) const char * d privatekey * value options(*string) const char * d passphrase * value options(*string) const char * * Implementation of C macro. d libssh2_userauth_publickey_fromfile... d pr extproc( d 'libssh2_userauth_publickey_fromfile' d ) d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d publickey * value options(*string) const char * d privatekey * value options(*string) const char * d passphrase * value options(*string) const char * d libssh2_userauth_publickey... d pr extproc('libssh2_userauth_publickey') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d pubkeydata * value options(*string) const unsigned char* d pubkeydata_len... d value like(libssh2_Csize_t) d sign_callback * value procptr d abstract * void *(*) d libssh2_userauth_hostbased_fromfile_ex... d pr extproc('libssh2_userauth_hostbased_- d fromfile_ex') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d username_len value like(libssh2_Cuint) d publickey * value options(*string) const char * d privatekey * value options(*string) const char * d passphrase * value options(*string) const char * d hostname * value options(*string) const char * d hostname_len value like(libssh2_Cuint) d local_username... d * value options(*string) const char * d local_username_len... d value like(libssh2_Cuint) * C macro implementation. d libssh2_userauth_hostbased_fromfile... d pr extproc( d 'libssh2_userauth_hostbased_fromfile' d ) d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d publickey * value options(*string) const char * d privatekey * value options(*string) const char * d passphrase * value options(*string) const char * d hostname * value options(*string) const char * d libssh2_userauth_publickey_frommemory... d pr extproc('libssh2_userauth_publickey_- d frommemory') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d username_len value like(libssh2_Csize_t) d publickeyfiledata... d * value options(*string) const char * d publickeyfiledata_len... d value like(libssh2_Csize_t) d privatekeyfiledata... d * value options(*string) const char * d privatekeyfiledata_len... d value like(libssh2_Csize_t) d passphrase * value options(*string) const char * * response_callback is provided with filled by library prompts array, * but client must allocate and fill individual responses. Responses * array is already allocated. Responses data will be freed by libssh2 * after callback return, but before subsequent callback invokation. d libssh2_userauth_keyboard_interactive_ex... d pr extproc('libssh2_userauth_keyboard_i- d nteractive_ex') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d username_len value like(libssh2_Cuint) d response_callback... d * value procptr * C macro implementation. d libssh2_userauth_keyboard_interactive... d pr extproc('libssh2_userauth_keyboard_i- d nteractive') d like(libssh2_Cint) d session * value LIBSSH2_SESSION * d username * value options(*string) const char * d response_callback... d * value procptr d libssh2_poll pr extproc('libssh2_poll') d like(libssh2_Cint) d fds * value LIBSSH2_POLLFD * d nfds value like(libssh2_Cuint) d timeout value like(libssh2_Clong) * Channel API. d LIBSSH2_CHANNEL_WINDOW_DEFAULT... d c X'00200000' d LIBSSH2_CHANNEL_PACKET_DEFAULT... d c 32768 d LIBSSH2_CHANNEL_MINADJUST... d c 1024 * Extended Data Handling. d LIBSSH2_CHANNEL_EXTENDED_DATA_NORMAL... d c 0 d LIBSSH2_CHANNEL_EXTENDED_DATA_IGNORE... d c 1 d LIBSSH2_CHANNEL_EXTENDED_DATA_MERGE... d c 2 d SSH_EXTENDED_DATA_STDERR... d c 1 * Returned by any function that would block during a read/write * operation. d LIBSSH2CHANNEL_EAGAIN... LIBSSH2_ERROR_EAGAIN d c -37 d libssh2_channel_open_ex... d pr * extproc('libssh2_channel_open_ex') LIBSSH2_CHANNEL * d session * value LIBSSH2_SESSION * d channel_type * value options(*string) const char * d channel_type_len... d value like(libssh2_Cuint) d window_size value like(libssh2_Cuint) d packet_size value like(libssh2_Cuint) d message * value options(*string) const char * d message_len value like(libssh2_Cuint) * C macro implementation. d libssh2_channel_open_session... d pr * extproc( LIBSSH2_CHANNEL * d 'libssh2_channel_open_session') d session * value LIBSSH2_SESSION * d libssh2_channel_direct_tcpip_ex... d pr * extproc( LIBSSH2_CHANNEL * d 'libssh2_channel_direct_tcpip_ex') d session * value LIBSSH2_SESSION * d host * value options(*string) const char * d port value like(libssh2_Cint) d shost * value options(*string) const char * d sport value like(libssh2_Cint) * C macro implementation. d libssh2_channel_direct_tcpip... d pr * extproc( LIBSSH2_CHANNEL * d 'libssh2_channel_direct_tcpip') d session * value LIBSSH2_SESSION * d host * value options(*string) const char * d port value like(libssh2_Cint) d libssh2_channel_forward_listen_ex... d pr * extproc( LIBSSH2_LISTENER * d 'libssh2_channel_forward_listen_ex') d session * value LIBSSH2_SESSION * d host * value options(*string) const char * d port value like(libssh2_Cint) d bound_port like(libssh2_Cint) d queue_maxsize value like(libssh2_Cint) * C macro implementation. d libssh2_channel_forward_listen... d pr * extproc( LIBSSH2_LISTENER * d 'libssh2_channel_forward_listen') d session * value LIBSSH2_SESSION * d port value like(libssh2_Cint) d libssh2_channel_forward_cancel... d pr extproc( d 'libssh2_channel_forward_cancel') d like(libssh2_Cint) d listener * value LIBSSH2_LISTENER * d libssh2_channel_forward_accept... d pr * extproc( LIBSSH2_CHANNEL * d 'libssh2_channel_forward_accept') d listener * value LIBSSH2_LISTENER * d libssh2_channel_setenv_ex... d pr extproc('libssh2_channel_setenv_ex') d like(libssh2_Cint) d channel * value LIBSSH2_CHANNEL * d varname * value options(*string) const char * d varname_len value like(libssh2_Cuint) d value * value options(*string) const char * d value_len value like(libssh2_Cuint) * C macro implementation. d libssh2_channel_setenv... d pr extproc('libssh2_channel_setenv') d like(libssh2_Cint) d channel * value LIBSSH2_CHANNEL * d varname * value options(*string) const char * d value * value options(*string) const char * d libssh2_channel_request_pty_ex... d pr extproc( d 'libssh2_channel_request_pty_ex') d like(libssh2_Cint) d channel * value LIBSSH2_CHANNEL * d term * value options(*string) const char * d term_len value like(libssh2_Cuint) d modes * value options(*string) const char * d modes_len value like(libssh2_Cuint) d width value like(libssh2_Cint) d height value like(libssh2_Cint) d width_px value like(libssh2_Cint) d height_px value like(libssh2_Cint) * C macro implementation. d libssh2_channel_request_pty... d pr extproc( d 'libssh2_channel_request_pty') d like(libssh2_Cint) d channel * value LIBSSH2_CHANNEL * d term * value options(*string) const char * d libssh2_channel_request_pty_size_ex... d pr extproc( d 'libssh2_channel_request_pty_size_ex' d ) d like(libssh2_Cint) d channel * value LIBSSH2_CHANNEL * d width value like(libssh2_Cint) d height value like(libssh2_Cint) d width_px value like(libssh2_Cint) d height_px value like(libssh2_Cint) * C macro implementation. d libssh2_channel_request_pty_size... d pr extproc( d 'libssh2_channel_request_pty_size') d like(libssh2_Cint) d channel * value LIBSSH2_CHANNEL * d width value like(libssh2_Cint) d height value like(libssh2_Cint) d libssh2_channel_x11_req_ex... d pr extproc('libssh2_chann