node-rpi-rgb-led-matrix-adafruit
Version:
control led matrix with nodejs on raspberry pi. Nodejs binding of https://github.com/hzeller/rpi-rgb-led-matrix
30 lines (25 loc) • 1.4 kB
Markdown
Adapter PCB to support up to 3 panels
======================================
* Supports up to three panel chains for newer plus models and
Raspberry Pi 2 that have 40 GPIO pins.
* Uses HCT245 to level shift signals from 3.3V to 5V and shield
the Raspberry Pi GPIOs from overloading.
* Open source KiCAD PCB EDA format.
* Optional: Pads to power the Pi with 5V, including optional capacitor footprints.
* Connector for RxD input (literally the only GPIO pin left) in case you want to
make your panel controlled with a serial interface (3.3V logic level).
* (not very pretty layout, was just lazy and let the auto-router generate the first pass)
* BOM:
- 4x 74HCT245 or 74AHCT245 in 20-SOIC, 7.5mm package which should make
it easy to hand-solder.
- 4x 100nF ceramic capacitor (0805 package)
- 1x 10kOhm resistor (0805 package)
- 3x 16pin IDC (=2x8) male receptible to connect the panels.
- 1x 40pin female connector to connect to the RPi.
* The Gerber FAB files are provided as [active3-rpi-hub75-adapter-fab.zip](./active3-rpi-hub75-adapter-fab.zip)
The board is also [shared on OSH Park][osh-active3] (not affiliated).
![Preview][rendering]
![Real World][real-world]
[rendering]: ../../img/active3-pcb.png
[real-world]: ../../img/three-parallel-panels-soic.jpg
[osh-active3]: https://oshpark.com/shared_projects/QIA9YHZH