node-red-contrib-myhome-bticino-v2
Version:
Control Bticino / Legrand MyHome components from Node-RED
72 lines (67 loc) • 3.69 kB
JSON
{
"common":
{
"_version_common": "2022.11.08",
"gateway": "Gateway",
"riser-private": "Private riser",
"riser-localbus-01": "Local bus 1",
"riser-localbus-02": "Local bus 2",
"riser-localbus-03": "Local bus 3",
"riser-localbus-04": "Local bus 4",
"riser-localbus-05": "Local bus 5",
"riser-localbus-06": "Local bus 6",
"riser-localbus-07": "Local bus 7",
"riser-localbus-08": "Local bus 8",
"riser-localbus-09": "Local bus 9",
"riser-localbus-10": "Local bus 10",
"riser-localbus-11": "Local bus 11",
"riser-localbus-12": "Local bus 12",
"riser-localbus-13": "Local bus 13",
"riser-localbus-14": "Local bus 14",
"riser-localbus-15": "Local bus 15",
"input-label-simple": "simple mode ('payload' or 'payload.state')",
"name": "Name",
"topic": "Topic",
"topic-info": "to trigger the action on this node, do not forget the incoming 'msg' MUST contain a 'msg.topic' which is either 'state/__topicName__' (when used in read-only mode) or 'cmd/__topicName__' (when used in write mode), otherwise node will skip incoming message.",
"option-smartfilter": "SmartFilter",
"option-smartfilter-checkbox": "Filter incoming gateway events",
"option-smartfilter-info": "SmartFilter is enabled by default, making the node only triggering a new flow (aka output) when a state CHANGED after a MyHome BUS message was received.\nThis is made to avoid multiple flows starting for the same info/command, because MyHome sends the same message multiple times (for status request, response,...) \n\nNote: SmartFilter is never applied when node is running in read-only (status update request) mode.",
"option-smartfilter-out-checkbox": "Filter outgoing commands sent to gateway",
"option-skipevents": "Skip events",
"option-skipevents-checkbox": "Skip ALL incoming gateway events",
"option-skipevents-info": "If necessary, all MyHome status updates received from the gateway about this node can be ignored, which means only Node-RED received payloads will be processed.",
"option-readonly": "Read-only",
"option-readonly-checkbox": "Only ask for current load status",
"option-readonly-info": "When enabled, the received payload (being 'ON', 'OFF', or whatever) is ignored and a status request is sent to gather current state without applying any change.",
"secondary-output-title": "Secondary output options",
"secondary-output-intro": "You may fine-tune the secondary output to better suit your needs when integrating with other node mechanisms (see node help for more info).",
"secondary-output-name": "Property name",
"secondary-output-name-placeholder": "e.g. On / state / ... / (empty)",
"secondary-output-name-info": "Is the property name on the returned payload (i.e. payload.propertyname). When left empty, the payload is returned as a single value (i.e. not as an object)",
"secondary-output-content": "Data type"
},
"mh-eventsession":
{
"config":
{
"name-placeholder": "Monitoring identifier",
"secondary-output-title": "Define command family filters",
"secondary-output-intro": "You may define which families of MyHome events must trigger new Node-RED flows.",
"type-lights": "Lights",
"type-lights-checkbox": "All lights events",
"type-shutters": "Shutters",
"type-shutters-checkbox": "All shutters events",
"type-temperature": "Temperature",
"type-temperature-checkbox": "All temperature control events",
"type-scenario": "Scenario",
"type-scenario-checkbox": "All scenario (CEN/CEN+) events",
"type-energy": "Energy",
"type-energy-checkbox": "All energy management events",
"type-others": "Others",
"type-others-checkbox": "All OTHER events"
},
"node":
{
}
}
}