node-red-contrib-knx-ultimate
Version:
Control your KNX and KNX Secure intallation via Node-Red! A bunch of KNX nodes, with integrated Philips HUE control, ETS group address importer, and KNX routing between interfaces. Easy to use and highly configurable.
146 lines (145 loc) • 9.03 kB
JSON
{
"knxUltimate-config": {
"properties": {
"title": "KNX 网关配置",
"host": "Gateway",
"host_info": "默认设置为 KNX/IP 的组播地址 (224.0.23.12)",
"port": "端口号",
"port_info": "默认设置为 KNX/IP (3671)",
"bind_local_int": "绑定到本地接口",
"restart_hint": "! 更改以后重启node-red !",
"adv_options": "高级选项",
"ets_import": "ETS组地址列表导入",
"node-config-input-name": "名称",
"unsecureKNX" : "一般的 KNX 连接",
"secureKNX" : "加密的 KNX 连接",
"autoReconnect" : "在启动时自动链接到KNX总线",
"autoReconnect_yes" : "是",
"autoReconnect_no" : "否（发送 msg.connectGateway = true 到看门狗节点以此来链接KNX总线）",
"discovering": "正在发现...",
"interfaces_found": "个接口已发现。",
"discovery_failed": "发现失败。",
"address": "地址",
"iface_auto": "自动",
"iface_manual": "手动输入接口名称",
"iface_name": "接口名称：",
"iface_name_placeholder": "接口名称，例如：eth0、ens1 或 Ethernet 1 ...",
"ip_port": "网关端口",
"ip_protocol": "连接协议",
"proto_auto": "自动",
"proto_tunnel_udp": "隧道 UDP",
"proto_multicast": "组播",
"proto_tunnel_tcp": "隧道 TCP",
"proto_serial_ft12": "Serial FT1.2",
"tunnel_ia_label": "隧道接口 IA",
"tunnel_ia_mode_auto": "自动",
"tunnel_ia_mode_manual": "手动",
"tunnel_ia_input_label": "接口 IA",
"tunnel_ia_placeholder": "1.1.1",
"secure_knx_label": "安全 KNX",
"secure_multicast_physaddr_hint": "Secure + Multicast：你设置的物理地址将用于对 Data Secure 电报进行签名。请确保该 IA 已在 ETS 中被配置为相关组地址的发送者（Sender），否则设备会拒绝这些消息。",
"secure_multicast_physaddr_hint_toggle": "信息",
"serial_port_path": "Serial port path",
"serial_refresh": "Refresh serial ports",
"serial_discovering": "Discovering serial ports...",
"serial_ports_found": "serial ports found.",
"serial_ports_failed": "Unable to list serial ports.",
"serial_baud": "Baud rate",
"serial_data_bits": "Data bits",
"serial_stop_bits": "Stop bits",
"serial_parity": "Parity",
"serial_parity_even": "Even",
"serial_parity_odd": "Odd",
"serial_parity_none": "None",
"serial_rtscts": "Enable RTS/CTS hardware flow control",
"serial_dtr": "Keep DTR asserted after connect",
"serial_timeout": "ACK timeout (ms)",
"serial_mode": "Serial FT1.2 模式",
"serial_mode_kberry": "KBerry/BAOS",
"serial_mode_standard": "标准 FT1.2"
},
"tabs": {
"configuration": "配置",
"advanced": "高级",
"ets_import": "ETS 导入",
"utility": "工具"
},
"advanced": {
"knx_phy_addr": "KNX 物理地址",
"show_date_status": "在状态中显示上次更新日期和时间",
"show_device_status": "在状态中显示设备的名称 (需要 \"监听所有组地址\" )",
"show_datapoint_status": "在状态中显示数据类型",
"suppress_ack": "抑制 ACK 请求 in tunneling mode",
"suppress_ack_help": "上面的选项有助于旧的 KNX/IP 接口兼容性 Warning: the node may not notice the disconnection from the gateway. In this case, use the watchdog in Ethernet+KNX twisted pair mode.",
"ignoreTelegramsWithRepeatedFlag": "抑制重复的 (R-Flag) 来自总线的电报",
"enable_flow_bubbles": "启用 flow bubbles 插件",
"enable_flow_bubbles_help": "在编辑器中为 KNX Device 节点显示实时状态气泡。适合调试和调试期间快速观察状态。",
"log_level": "日志等级",
"status_datetime_format": "状态日期/时间格式",
"status_datetime_format_legacy": "兼容模式（系统区域设置）",
"status_datetime_format_iso": "ISO（YYYY-MM-DD HH:mm:ss）",
"status_datetime_format_iso_nosec": "ISO（YYYY-MM-DD HH:mm）",
"status_datetime_format_custom": "自定义（标记）",
"status_datetime_custom": "自定义格式",
"status_datetime_custom_placeholder": "DD MMM HH:mm",
"status_datetime_locale": "区域设置覆盖",
"status_datetime_locale_placeholder": "zh-CN",
"nodes_list_title": "所有流中的节点列表",
"nodes_list_help": "这是你配置的所有 KNX 节点的列表。",
"select_silent": "没有日志输出",
"select_trace": "跟踪",
"select_debug": "调试",
"select_info": "信息",
"select_warning": "警告",
"select_error": "错误 (默认值)",
"tiphost": "写 EMULATE 而不是 IP 地址，模拟网关（网关不会连接到 KNX BUS）",
"delaybetweentelegrams": "数据发送间隔时间 (毫秒)",
"delaybetweentelegramsfurtherdelayREAD" : "并且仅在读取电报之间进一步增加延迟"
},
"help": {
"intro": "配置 KNX gateway 连接、ETS 导入以及编辑器中的高级行为。",
"flow_bubbles_title": "Flow bubbles 插件",
"flow_bubbles_enable": "启用此选项后，编辑器会在每个 KNX Device 节点旁边显示一个小的彩色气泡。",
"flow_bubbles_scope": "这些气泡反映了编辑器从绑定到此 gateway 的 KNX Device 节点接收到的最新实时状态。",
"flow_bubbles_tooltip": "将鼠标悬停在气泡上，可以查看节点名称或 topic、最后一个 payload 以及当前状态文本。",
"flow_bubbles_stale": "如果最近没有 KNX 流量，气泡会保持变淡，以便区分过期数据和最新更新。"
},
"ets": {
"description": "您可以导入 ETS CSV 组地址列表或 ESF 组地址列表。 请优先选择 ETS CSV 组地址列表，因为数据类型更完整.",
"youtube" : " <i class=\"fa fa-youtube-play\"></i> <a target=\"_blank\" href=\"https://youtu.be/egRbR_KwP9I\"><u>在Youtube上看怎么导入CSV文件.</u></a>",
"help_ga": "如果组地址没有数据类型",
"import_select_stop": "停止并且中断导入",
"import_select_skip": "跳过受影响的组地址",
"import_select_fake": "导入并替代为一个 1.001 数据类型 (不建议)",
"ga_list_title": "在此处粘贴从 ETS 导出的文件的内容，或文件的路径（例如：/home/pi/mycsv.csv）",
"ga_list_help": "在此处粘贴从 ETS 导出的文件的内容，或文件的路径（例如：/home/pi/mycsv.csv）",
"deploywithETS": "将执行一些控制操作。 任何问题都会在右侧的调试窗口中报告.",
"keyring":"在这里粘贴从 ETS 导出的 Keyring XML 文件的内容",
"youtubeKeyring": "在 Youtube 上了解如何导出 Keyring XML 文件",
"keyring_file": "Keyring 文件",
"password": "密码",
"secure_credentials_mode": "安全凭据来源",
"secure_credentials_mode_keyring": "ETS 密钥环文件",
"secure_credentials_mode_manual": "手动凭据",
"secure_credentials_mode_combined": "密钥环 + 手动隧道密码",
"tunnel_interface_individual_address": "隧道接口个人地址",
"tunnel_interface_individual_address_placeholder": "1.1.1",
"tunnel_user_id": "隧道用户 ID",
"tunnel_user_password": "隧道用户密码",
"ga_list_label": "ETS 组地址列表"
},
"utility": {
"gather_debug": "收集调试信息和日志以便排查",
"get_all_used_ga": "获取 KNX 路由过滤器使用的所有 GA",
"read_button": "读取",
"copy_ga_router": "将这些组地址复制到 KNX/IP 路由器的路由表中。",
"clear_persist_label": "清除该网关的持久化 GA 缓存",
"clear_persist_button": "清除",
"clear_persist_confirm": "这将删除该网关的持久化 GA 缓存文件。继续？",
"clear_persist_ok": "删除",
"clear_persist_cancel": "取消",
"clear_persist_done": "已删除持久化 GA 缓存。",
"clear_persist_fail": "无法删除持久化 GA 缓存"
}
}
}