node-red-contrib-boolean-logic-ultimate/examples/FilterUltimate.json

A set of Node-RED enhanced boolean logic and utility nodes, flow interruption, blinker, debouncer, invert, filter, toggle etc.., with persistent values after reboot. Compatible also with Homeassistant values.

[
  {
    "id": "fil_tab_1",
    "type": "tab",
    "label": "FilterUltimate - true/false routing",
    "disabled": false,
    "info": "Esempio: instradamento su 2 uscite in base al valore booleano (con supporto translator-config)."
  },
  {
    "id": "fil_cmt_1",
    "type": "comment",
    "z": "fil_tab_1",
    "name": "Output 1 = True, Output 2 = False",
    "info": "Invia \"on\"/\"off\": il translator-config converte a booleano prima del filtro.",
    "x": 230,
    "y": 60,
    "wires": []
  },
  {
    "id": "fil_inj_on",
    "type": "inject",
    "z": "fil_tab_1",
    "name": "payload = \"on\"",
    "props": [
      { "p": "payload", "v": "on", "vt": "str" },
      { "p": "topic", "v": "state", "vt": "str" }
    ],
    "repeat": "",
    "crontab": "",
    "once": false,
    "onceDelay": 0.1,
    "x": 140,
    "y": 140,
    "wires": [["fil_node_1"]]
  },
  {
    "id": "fil_inj_off",
    "type": "inject",
    "z": "fil_tab_1",
    "name": "payload = \"off\"",
    "props": [
      { "p": "payload", "v": "off", "vt": "str" },
      { "p": "topic", "v": "state", "vt": "str" }
    ],
    "repeat": "",
    "crontab": "",
    "once": false,
    "onceDelay": 0.1,
    "x": 140,
    "y": 180,
    "wires": [["fil_node_1"]]
  },
  {
    "id": "fil_node_1",
    "type": "FilterUltimate",
    "z": "fil_tab_1",
    "name": "Filter (HA)",
    "payloadPropName": "payload",
    "translatorConfig": "fil_trans_1",
    "x": 350,
    "y": 160,
    "wires": [["fil_dbg_true"], ["fil_dbg_false"]]
  },
  {
    "id": "fil_dbg_true",
    "type": "debug",
    "z": "fil_tab_1",
    "name": "Output True",
    "active": true,
    "tosidebar": true,
    "console": false,
    "tostatus": false,
    "complete": "payload",
    "targetType": "msg",
    "statusVal": "",
    "statusType": "auto",
    "x": 580,
    "y": 140,
    "wires": []
  },
  {
    "id": "fil_dbg_false",
    "type": "debug",
    "z": "fil_tab_1",
    "name": "Output False",
    "active": true,
    "tosidebar": true,
    "console": false,
    "tostatus": false,
    "complete": "payload",
    "targetType": "msg",
    "statusVal": "",
    "statusType": "auto",
    "x": 580,
    "y": 180,
    "wires": []
  },
  {
    "id": "fil_trans_1",
    "type": "translator-config",
    "name": "Home Assistant",
    "commandText": "on:true\noff:false\nactive:true\ninactive:false\nopen:true\nclosed:false\nclose:false\n1:true\n0:false\ntrue:true\nfalse:false\nhome:true\nnot_home:false"
  }
]