neo4j-driver-core
Version:
Internals of neo4j-driver
308 lines (307 loc) • 14.7 kB
JavaScript
;
/**
* Copyright (c) "Neo4j"
* Neo4j Sweden AB [https://neo4j.com]
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
var __extends = (this && this.__extends) || (function () {
var extendStatics = function (d, b) {
extendStatics = Object.setPrototypeOf ||
({ __proto__: [] } instanceof Array && function (d, b) { d.__proto__ = b; }) ||
function (d, b) { for (var p in b) if (Object.prototype.hasOwnProperty.call(b, p)) d[p] = b[p]; };
return extendStatics(d, b);
};
return function (d, b) {
if (typeof b !== "function" && b !== null)
throw new TypeError("Class extends value " + String(b) + " is not a constructor or null");
extendStatics(d, b);
function __() { this.constructor = d; }
d.prototype = b === null ? Object.create(b) : (__.prototype = b.prototype, new __());
};
})();
Object.defineProperty(exports, "__esModule", { value: true });
exports.InternalConfig = exports.Config = void 0;
/**
* The Neo4j Driver configuration.
*
* @interface
*/
var Config = /** @class */ (function () {
/**
* @constructor
* @private
*/
function Config() {
/**
* Encryption level
*
* @type {'ENCRYPTION_ON'|'ENCRYPTION_OFF'|undefined}
*/
this.encrypted = undefined;
/**
* Trust strategy to use if encryption is enabled.
*
* There is no mode to disable trust other than disabling encryption altogether. The reason for
* this is that if you don't know who you are talking to, it is easy for an
* attacker to hijack your encrypted connection, rendering encryption pointless.
*
* TRUST_SYSTEM_CA_SIGNED_CERTIFICATES is the default choice. For NodeJS environments, this
* means that you trust whatever certificates are in the default trusted certificate
* store of the underlying system. For Browser environments, the trusted certificate
* store is usually managed by the browser. Refer to your system or browser documentation
* if you want to explicitly add a certificate as trusted.
*
* TRUST_CUSTOM_CA_SIGNED_CERTIFICATES is another option for trust verification -
* whenever we establish an encrypted connection, we ensure the host is using
* an encryption certificate that is in, or is signed by, a certificate given
* as trusted through configuration. This option is only available for NodeJS environments.
*
* TRUST_ALL_CERTIFICATES means that you trust everything without any verifications
* steps carried out. This option is only available for NodeJS environments and should not
* be used on production systems.
*
* @type {'TRUST_SYSTEM_CA_SIGNED_CERTIFICATES'|'TRUST_CUSTOM_CA_SIGNED_CERTIFICATES'|'TRUST_ALL_CERTIFICATES'|undefined}
*/
this.trust = undefined;
/**
* List of one or more paths to trusted encryption certificates.
*
* This only works in the NodeJS bundle,
* and only matters if you use "TRUST_CUSTOM_CA_SIGNED_CERTIFICATES".
*
* The certificate files should be in regular X.509 PEM format.
*
* For instance, ['./trusted.pem']
*
* @type {?string[]}
* @see {@link Config#trust}
*/
this.trustedCertificates = [];
/**
* The maximum total number of connections allowed to be managed by the connection pool, per host.
*
* This includes both in-use and idle connections.
*
* **Default**: ```100```
*
* @type {number|undefined}
*/
this.maxConnectionPoolSize = 100;
/**
* The maximum allowed lifetime for a pooled connection in milliseconds.
*
* Pooled connections older than this
* threshold will be closed and removed from the pool. Such discarding happens during connection acquisition
* so that new session is never backed by an old connection. Setting this option to a low value will cause
* a high connection churn and might result in a performance hit. It is recommended to set maximum lifetime
* to a slightly smaller value than the one configured in network equipment (load balancer, proxy, firewall,
* etc. can also limit maximum connection lifetime). No maximum lifetime limit is imposed by default. Zero
* and negative values result in lifetime not being checked.
*
* **Default**: ```60 * 60 * 1000``` (1 hour)
*
* @type {number|undefined}
*/
this.maxConnectionLifetime = 60 * 60 * 1000; // 1 hour
/**
* The maximum amount of time to wait to acquire a connection from the pool (to either create a new
* connection or borrow an existing one).
*
* **Default**: ```60000``` (1 minute)
*
* @type {number|undefined}
*/
this.connectionAcquisitionTimeout = 60000; // 1 minute
/**
* Specify the maximum time in milliseconds transactions are allowed to retry via
* {@link Session#executeRead} and {@link Session#executeWrite} functions.
*
* These functions will retry the given unit of work on `ServiceUnavailable`, `SessionExpired` and transient
* errors with exponential backoff using an initial delay of 1 second.
*
* **Default**: ```30000``` (30 seconds)
*
* @type {number|undefined}
*/
this.maxTransactionRetryTime = 30000; // 30 seconds
/**
* Specify the maximum time in milliseconds the connection can be idle without needing
* to perform a liveness check on acquire from the pool.
*
* Pooled connections that have been idle in the pool for longer than this
* timeout will be tested before they are used again, to ensure they are still live.
* If this option is set too low, an additional network call will be incurred
* when acquiring a connection, which causes a performance hit.
*
* If this is set high, you may receive sessions that are backed by no longer
* live connections, which will lead to exceptions in your application.
* Assuming the database is running, these exceptions will go away if you retry
* acquiring sessions.
*
* Hence, this parameter tunes a balance between the likelihood of your application
* seeing connection problems, and performance.
*
* You normally should not need to tune this parameter. No connection liveliness
* check is done by default. Value 0 means connections will always be tested for
* validity and negative values mean connections will never be tested.
*
* **Default**: ```undefined``` (Disabled)
*
* @type {number|undefined}
*/
this.connectionLivenessCheckTimeout = undefined; // Disabled
/**
* Specify socket connection timeout in milliseconds.
*
* Negative and zero values result in no timeout being applied.
* Connection establishment will be then bound by the timeout configured
* on the operating system level.
*
* **Default**: ```30000``` (30 seconds)
*
* @type {number|undefined}
*/
this.connectionTimeout = 30000; // 30 seconds
/**
* Make this driver always return native JavaScript numbers for integer values, instead of the
* dedicated {@link Integer} class.
*
* Values that do not fit in native number bit range will be represented as `Number.NEGATIVE_INFINITY` or `Number.POSITIVE_INFINITY`.
*
* **Warning:** {@link ResultSummary} It is not always safe to enable this setting when JavaScript applications are not the only ones
* interacting with the database. Stored numbers might in such case be not representable by native
* `Number` type and thus the driver will return lossy values. This might also happen when data was
* initially imported using neo4j import tool and contained numbers larger than
* `Number.MAX_SAFE_INTEGER`. Driver will then return positive infinity, which is lossy.
*
* **Default**: ```false```
*
* Default value for this option is `false` because native JavaScript numbers might result
* in loss of precision in the general case.
*
* @type {boolean|undefined}
*/
this.disableLosslessIntegers = false;
/**
* Make this driver always return native Javascript `BigInt` for integer values,
* instead of the dedicated {@link Integer} class or `Number`.
*
* **Warning:** `BigInt` doesn't implement the method `toJSON`. To serialize it as `json`,
* it's needed to add a custom implementation of the `toJSON` on the
* `BigInt.prototype`. See https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/BigInt#use_within_json.
*
* **Default**: ```false``` (for backwards compatibility)
*
* @type {boolean|undefined}
*/
this.useBigInt = false;
/**
* Specify the logging configuration for the driver. Object should have two properties `level` and `logger`.
*
* Property `level` represents the logging level which should be one of: 'error', 'warn', 'info' or 'debug'. This property is optional and
* its default value is 'info'. Levels have priorities: 'error': 0, 'warn': 1, 'info': 2, 'debug': 3. Enabling a certain level also enables all
* levels with lower priority. For example: 'error', 'warn' and 'info' will be logged when 'info' level is configured.
*
* Property `logger` represents the logging function which will be invoked for every log call with an acceptable level. The function should
* take two string arguments `level` and `message`. The function should not execute any blocking or long-running operations
* because it is often executed on a hot path.
*
* No logging is done by default. See `neo4j.logging` object that contains predefined logging implementations.
*
* @type {LoggingConfig|undefined}
* @see {@link logging}
*/
this.logging = undefined;
/**
* Specify a custom server address resolver function used by the routing driver to resolve the initial address used to create the driver.
*
* Such resolution happens:
* * during the very first rediscovery when driver is created
* * when all the known routers from the current routing table have failed and driver needs to fallback to the initial address
*
* In NodeJS environment driver defaults to performing a DNS resolution of the initial address using 'dns' module.
* In browser environment driver uses the initial address as-is.
* Value should be a function that takes a single string argument - the initial address. It should return an array of new addresses.
* Address is a string of shape '<host>:<port>'. Provided function can return either a Promise resolved with an array of addresses
* or array of addresses directly.
*
* @type {function(address: string) {} |undefined}
*/
this.resolver = undefined;
/**
* Configure filter for Notification objects returned in {@Link ResultSummary#notifications}.
*
* See {@link SessionConfig#notificationFilter} for usage instructions.
*
* @type {NotificationFilter|undefined}
*/
this.notificationFilter = undefined;
/**
* Optionally override the default user agent name.
*
* **Default**: ```'neo4j-javascript/<version>'```
*
* @type {string|undefined}
*/
this.userAgent = undefined;
/**
* Specify if telemetry collection is disabled.
*
* By default, the driver will send anonymous usage statistics to the server it connects to if the server requests those.
* By setting ``telemetryDisabled=true``, the driver will not send any telemetry data.
*
* The driver transmits the following information:
*
* Every time one of the following APIs is used to execute a query (for the first time), the server is informed of this
* (without any further information like arguments, client identifiers, etc.):
*
* * {@link Driver#executeQuery}
* * {@link Session#run}
* * {@link Session#beginTransaction}
* * {@link Session#executeRead}
* * {@link Session#executeWrite}
* * {@link Session#writeTransaction}
* * {@link Session#readTransaction}
* * The reactive counterparts of methods above.
*
* Metrics are only collected when enabled both in server and driver instances.
*
* **Default**: ```false```
*
* @type {boolean}
*/
this.telemetryDisabled = false;
/**
* Client Certificate used for mutual TLS.
*
* A {@link ClientCertificateProvider} can be configure for scenarios
* where the {@link ClientCertificate} might change over time.
*
* @type {ClientCertificate|ClientCertificateProvider|undefined}
* @experimental Exposed as preview feature.
* @since 5.19
*/
this.clientCertificate = undefined;
}
return Config;
}());
exports.Config = Config;
var InternalConfig = /** @class */ (function (_super) {
__extends(InternalConfig, _super);
function InternalConfig() {
return _super !== null && _super.apply(this, arguments) || this;
}
return InternalConfig;
}(Config));
exports.InternalConfig = InternalConfig;