iot-sol

[{ "SKU": "104030003", "GroveName": "Grove - 4-Digit Display", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/3/3a9f79323a82950c12fc7e69fa9fab4d.image.530x397.jpg", "ClassName": "Grove4Digit", "CanGetLastError": true, "HasPowerOffFunc": true, "ID": 0, "ConstructArgList": ["int pintx", "int pinrx"], "Files": ["grove_4_digit.cpp", "grove_4_digit.h"], "ClassFile": "grove_4_digit.h", "Events": {}, "HasPowerOnFunc": true, "Reads": {}, "InterfaceType": "UART", "HasEvent": false, "IncludePath": "./grove_drivers/grove_4_digit", "Writes": { "write_display_point": { "Arguments": [ ["uint8_t", "display"] ] }, "write_display_digits": { "Arguments": [ ["uint8_t", "start_pos"], ["char *", "chars"] ] }, "write_clear": { "Arguments": [] }, "write_display_one_digit": { "Arguments": [ ["uint8_t", "position"], ["char *", "chr"] ] }, "write_brightness": { "Arguments": [ ["uint8_t", "brightness"] ] } } }, { "SKU": "101020039", "GroveName": "Grove-3Axis Digital Acc(\u00b11.5g)", "ImageURL": "http://www.seeedstudio.com/wiki/images/b/bb/3_aix_acc.jpg", "ClassName": "GroveAccMMA7660", "CanGetLastError": false, "HasPowerOffFunc": true, "ID": 1, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_acc_mma7660.cpp", "grove_acc_mma7660.h"], "ClassFile": "grove_acc_mma7660.h", "Events": {}, "HasPowerOnFunc": true, "Reads": { "read_acceleration": { "Raw": ["float *ax", "float *ay", "float *az"], "Returns": [ ["float", "ax"], ["float", "ay"], ["float", "az"] ], "Arguments": [] }, "read_shaked": { "Raw": ["uint8_t *shaked"], "Returns": [ ["uint8_t", "shaked"] ], "Arguments": [] } }, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_acc_mma7660", "Writes": {} }, { "SKU": "101020078", "GroveName": "Grove - Air Quality Sensor", "ImageURL": "http://www.seeedstudio.com/depot/images/product/101020078%201_02.jpg", "ClassName": "GroveAirquality", "CanGetLastError": true, "HasPowerOffFunc": true, "ID": 2, "ConstructArgList": ["int pin"], "Files": ["grove_airquality_tp401a.cpp", "grove_airquality_tp401a.h"], "ClassFile": "grove_airquality_tp401a.h", "Events": {}, "HasPowerOnFunc": true, "Reads": { "read_quality": { "Raw": ["int *quality"], "Returns": [ ["int", "quality"] ], "Arguments": [] } }, "InterfaceType": "ANALOG", "HasEvent": false, "IncludePath": "./grove_drivers/grove_airquality_tp401a", "Writes": {} }, { "SKU": "101020032", "GroveName": "Grove-Barometer(BMP085)", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/e/e7/Grove-Barometer.jpg/621px-Grove-Barometer.jpg", "ClassName": "GroveBaroBMP085", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 3, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_baro_bmp085.cpp", "grove_baro_bmp085.h"], "ClassFile": "grove_baro_bmp085.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_temperature": { "Raw": ["float *temperature"], "Returns": [ ["float", "temperature"] ], "Arguments": [] }, "read_altitude": { "Raw": ["float *altitude"], "Returns": [ ["float", "altitude"] ], "Arguments": [] }, "read_pressure": { "Raw": ["int32_t *pressure"], "Returns": [ ["int32_t", "pressure"] ], "Arguments": [] } }, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_baro_bmp085", "Writes": {} }, { "SKU": "101020003", "GroveName": "Grove-Button", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/c/ca/Button.jpg/300px-Button.jpg", "ClassName": "GroveButton", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 4, "ConstructArgList": ["int pin"], "Files": ["grove_button.cpp", "grove_button.h"], "ClassFile": "grove_button.h", "Events": { "button_pressed": "int16_t" }, "HasPowerOnFunc": false, "Reads": { "read_pressed": { "Raw": ["uint8_t *pressed"], "Returns": [ ["uint8_t", "pressed"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": true, "IncludePath": "./grove_drivers/grove_button", "Writes": {} }, { "SKU": "101020034", "GroveName": "Grove-3Axis Compass", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/b/be/Axis_compass.jpg/400px-Axis_compass.jpg", "ClassName": "GroveCompass", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 5, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_comp_hmc5883l.cpp", "grove_comp_hmc5883l.h"], "ClassFile": "grove_comp_hmc5883l.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_compass_heading": { "Raw": ["float *heading_deg"], "Returns": [ ["float", "heading_deg"] ], "Arguments": [] } }, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_comp_hmc5883l", "Writes": {} }, { "SKU": "101020030", "GroveName": "Grove-Digital Light", "ImageURL": "http://www.seeedstudio.com/wiki/images/6/69/Digital_Light_Sensor.jpg", "ClassName": "GroveDigitalLight", "CanGetLastError": true, "HasPowerOffFunc": false, "ID": 6, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_digital_light.cpp", "grove_digital_light.h"], "ClassFile": "grove_digital_light.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_lux": { "Raw": ["uint32_t *lux"], "Returns": [ ["uint32_t", "lux"] ], "Arguments": [] } }, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_digital_light", "Writes": {} }, { "SKU": "103020014", "GroveName": "Grove-Dry-Reed Relay", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/1/16a562af66ac52d6e0e19a7b6ec5588d.image.530x397.jpg", "ClassName": "GroveDryReedRelay", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 7, "ConstructArgList": ["int pin"], "Files": ["grove_dryreed_relay.cpp", "grove_dryreed_relay.h"], "ClassFile": "grove_dryreed_relay.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_dryreed_relay", "Writes": { "write_onoff": { "Arguments": [ ["int", "onoff"] ] } } }, { "SKU": "105020005", "GroveName": "Grove-EL Driver", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/4/45c3a0b2df09759a952ae01bf5207b42.image.530x397.jpg", "ClassName": "GroveEL", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 8, "ConstructArgList": ["int pin"], "Files": ["grove_el_driver.cpp", "grove_el_driver.h"], "ClassFile": "grove_el_driver.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_el_driver", "Writes": { "write_onoff": { "Arguments": [ ["int", "onoff"] ] } } }, { "SKU": "101020073", "GroveName": "Grove-Electromagnet", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/9/9509f6e5cb898db66420ae739bb51eb3.image.164x123.jpg", "ClassName": "GroveElecMagnet", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 9, "ConstructArgList": ["int pin"], "Files": ["grove_electromagnet.cpp", "grove_electromagnet.h"], "ClassFile": "grove_electromagnet.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_electromagnet", "Writes": { "write_onoff": { "Arguments": [ ["int", "onoff"] ] } } }, { "SKU": "111020001", "GroveName": "Grove - Encoder", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/0/00a3a97e35f0ede1275ea4a989e4953c.image.530x397.jpg", "ClassName": "GroveEncoder", "CanGetLastError": false, "HasPowerOffFunc": true, "ID": 10, "ConstructArgList": ["int pintx", "int pinrx"], "Files": ["grove_encoder.cpp", "grove_encoder.h"], "ClassFile": "grove_encoder.h", "Events": { "encoder_position": "int32_t" }, "HasPowerOnFunc": true, "Reads": { "read_position": { "Raw": ["int32_t *position"], "Returns": [ ["int32_t", "position"] ], "Arguments": [] } }, "InterfaceType": "UART", "HasEvent": true, "IncludePath": "./grove_drivers/grove_encoder", "Writes": { "write_reset_position": { "Arguments": [ ["int32_t", "position"] ] }, "write_enable_acceleration": { "Arguments": [ ["uint8_t", "enable"] ] } } }, { "SKU": "71714fec-8911-11e5-af63-feff819cdc9f", "GroveName": "Grove_Example", "ImageURL": "http://www.seeedstudio.com/depot/includes/templates/bootstrap/images/ico/grove.png", "ClassName": "GroveExample", "CanGetLastError": true, "HasPowerOffFunc": true, "ID": 11, "ConstructArgList": ["int pin"], "Files": ["grove_example.cpp", "grove_example.h"], "ClassFile": "grove_example.h", "Events": { "fire": "int16_t", "event2": "int16_t" }, "HasPowerOnFunc": true, "Reads": { "read_temp": { "Raw": ["int *temp"], "Returns": [ ["int", "temp"] ], "Arguments": [] }, "read_uint8_value": { "Raw": ["uint8_t *value"], "Returns": [ ["uint8_t", "value"] ], "Arguments": [] }, "read_with_arg": { "Raw": ["float *cx", "float *cy", "float *cz", "int *degree", "int arg"], "Returns": [ ["float", "cx"], ["float", "cy"], ["float", "cz"], ["int", "degree"] ], "Arguments": [ ["int", "arg"] ] }, "read_compass": { "Raw": ["float *cx", "float *cy", "float *cz", "int *degree"], "Returns": [ ["float", "cx"], ["float", "cy"], ["float", "cz"], ["int", "degree"] ], "Arguments": [] }, "read_acc": { "Raw": ["float *ax", "float *ay", "float *az"], "Returns": [ ["float", "ax"], ["float", "ay"], ["float", "az"] ], "Arguments": [] }, "read_humidity": { "Raw": ["float *humidity"], "Returns": [ ["float", "humidity"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": true, "IncludePath": "./grove_drivers/grove_example", "Writes": { "write_multi_value": { "Arguments": [ ["int", "a"], ["float", "b"], ["uint32_t", "c"] ] }, "write_acc_mode": { "Arguments": [ ["uint8_t", "mode"] ] }, "write_float_value": { "Arguments": [ ["float", "f"] ] } } }, { "SKU": "eedec01c-8c5a-11e5-8994-feff819cdc9f", "GroveName": "Generic Analog Input", "ImageURL": "http://www.seeedstudio.com/wiki/images/8/87/Pion_one_generic_analog.png", "ClassName": "GenericAIn", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 12, "ConstructArgList": ["int pin"], "Files": ["grove_generic_analog_in.cpp", "grove_generic_analog_in.h"], "ClassFile": "grove_generic_analog_in.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_analog": { "Raw": ["int *analog"], "Returns": [ ["int", "analog"] ], "Arguments": [] } }, "InterfaceType": "ANALOG", "HasEvent": false, "IncludePath": "./grove_drivers/grove_generic_analog_in", "Writes": {} }, { "SKU": "7e3306bc-8911-11e5-af63-feff819cdc9f", "GroveName": "Generic Digital Input", "ImageURL": "http://www.seeedstudio.com/wiki/images/e/ea/Pion_one_generic_din.png", "ClassName": "GenericDIn", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 13, "ConstructArgList": ["int pin"], "Files": ["grove_generic_digital_in.cpp", "grove_generic_digital_in.h"], "ClassFile": "grove_generic_digital_in.h", "Events": { "input_changed": "int16_t" }, "HasPowerOnFunc": false, "Reads": { "read_input": { "Raw": ["uint8_t *input"], "Returns": [ ["uint8_t", "input"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": true, "IncludePath": "./grove_drivers/grove_generic_digital_in", "Writes": {} }, { "SKU": "3a9d9a84-8c59-11e5-8994-feff819cdc9f", "GroveName": "Generic Digital Output", "ImageURL": "http://www.seeedstudio.com/wiki/images/0/00/Pion_one_generic_dout.png", "ClassName": "GenericDOut", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 14, "ConstructArgList": ["int pin"], "Files": ["grove_generic_digital_out.cpp", "grove_generic_digital_out.h"], "ClassFile": "grove_generic_digital_out.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_onoff_status": { "Raw": ["int *onoff"], "Returns": [ ["int", "onoff"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_generic_digital_out", "Writes": { "write_onoff": { "Arguments": [ ["int", "onoff"] ] } } }, { "SKU": "63e25800-a2d2-11e5-bf7f-feff819cdc9f", "GroveName": "Generic PWM/Analog Output", "ImageURL": "http://www.seeedstudio.com/wiki/images/b/b4/Generic_analog_output.png", "ClassName": "GenericPWMOut", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 15, "ConstructArgList": ["int pin"], "Files": ["grove_generic_pwm_out.cpp", "grove_generic_pwm_out.h"], "ClassFile": "grove_generic_pwm_out.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_pwm": { "Raw": ["float *duty_percent", "uint32_t *freq"], "Returns": [ ["float", "duty_percent"], ["uint32_t", "freq"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_generic_pwm_out", "Writes": { "write_pwm": { "Arguments": [ ["float", "duty_percent"] ] }, "write_pwm_with_freq": { "Arguments": [ ["float", "duty_percent"], ["uint32_t", "freq"] ] } } }, { "SKU": "101020083", "GroveName": "Grove - Gesture v1.0", "ImageURL": "http://www.seeedstudio.com/depot/images/product/101020083%201_01.jpg", "ClassName": "GroveGesture", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 16, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_gesture_paj7620.cpp", "grove_gesture_paj7620.h"], "ClassFile": "grove_gesture_paj7620.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_motion": { "Raw": ["uint8_t *motion"], "Returns": [ ["uint8_t", "motion"] ], "Arguments": [] } }, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_gesture_paj7620", "Writes": {} }, { "SKU": "101020050", "GroveName": "Grove-3-Axis Digital Gyro", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/f/f6/Gbgr.jpg/500px-Gbgr.jpg", "ClassName": "GroveGyroITG3200", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 17, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_gyro_itg3200.cpp", "grove_gyro_itg3200.h"], "ClassFile": "grove_gyro_itg3200.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_temperature": { "Raw": ["float *temp"], "Returns": [ ["float", "temp"] ], "Arguments": [] }, "read_gyro": { "Raw": ["float *gx", "float *gy", "float *gz"], "Returns": [ ["float", "gx"], ["float", "gy"], ["float", "gz"] ], "Arguments": [] } }, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_gyro_itg3200", "Writes": { "write_zerocalibrate": { "Arguments": [] } } }, { "SKU": "105020001", "GroveName": "Grove-I2C Motor Driver", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/3/3ac50a997c78858b8f960475f878e369.image.530x397.jpg", "ClassName": "GroveI2CMotorDriver", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 18, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_i2c_motor_driver.cpp", "grove_i2c_motor_driver.h"], "ClassFile": "grove_i2c_motor_driver.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_i2c_motor_driver", "Writes": { "write_i2c_address": { "Arguments": [ ["uint8_t", "addr_7bits"] ] }, "write_enable_stepper_mode": { "Arguments": [ ["uint8_t", "direction"], ["uint8_t", "speed"] ] }, "write_dcmotor1_resume": { "Arguments": [] }, "write_disable_stepper_mode": { "Arguments": [] }, "write_dcmotor1_change_direction": { "Arguments": [] }, "write_dcmotor_speed": { "Arguments": [ ["uint8_t", "speed_m1"], ["uint8_t", "speed_m2"] ] }, "write_dcmotor2_change_direction": { "Arguments": [] }, "write_stepper_steps": { "Arguments": [ ["uint8_t", "steps"] ] }, "write_dcmotor2_resume": { "Arguments": [] }, "write_dcmotor2_break": { "Arguments": [] }, "write_dcmotor1_break": { "Arguments": [] } } }, { "SKU": "101020040", "GroveName": "Grove-IR Distance Interrupter", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/e/e1/IR_Distance_Interrupter.jpg/300px-IR_Distance_Interrupter.jpg", "ClassName": "GroveIRDistanceInterrupter", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 19, "ConstructArgList": ["int pin"], "Files": ["grove_ir_distance_intr.cpp", "grove_ir_distance_intr.h"], "ClassFile": "grove_ir_distance_intr.h", "Events": { "ir_approached": "int16_t" }, "HasPowerOnFunc": false, "Reads": { "read_approach": { "Raw": ["uint8_t *approach"], "Returns": [ ["uint8_t", "approach"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": true, "IncludePath": "./grove_drivers/grove_ir_distance_intr", "Writes": {} }, { "SKU": "101020026", "GroveName": "Grove - Infrared Emitter", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/6/6a/Grove_-_Infrared_Emitter.jpg/400px-Grove_-_Infrared_Emitter.jpg", "ClassName": "GroveIREmit", "CanGetLastError": true, "HasPowerOffFunc": false, "ID": 20, "ConstructArgList": ["int pin"], "Files": ["grove_ir_emitter.cpp", "grove_ir_emitter.h"], "ClassFile": "grove_ir_emitter.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_protocal_parametersbool": { "Raw": ["uint8_t *start_h", "uint8_t *start_l", "uint8_t *n_short", "uint8_t *n_long"], "Returns": [ ["uint8_t", "start_h"], ["uint8_t", "start_l"], ["uint8_t", "n_short"], ["uint8_t", "n_long"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_ir_emitter", "Writes": { "write_data_hex": { "Arguments": [ ["char *", "data_hex"] ] }, "write_protocol_parameters": { "Arguments": [ ["uint8_t", "start_h"], ["uint8_t", "start_l"], ["uint8_t", "n_short"], ["uint8_t", "n_long"] ] }, "write_data_hex_in_freq": { "Arguments": [ ["uint16_t", "freq_khz"], ["char *", "data_hex"] ] } } }, { "SKU": "101020016", "GroveName": "Grove - Infrared Receiver", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/e/ee/Grove_-_Infrared_Receiver.jpg/400px-Grove_-_Infrared_Receiver.jpg", "ClassName": "GroveIRRecv", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 21, "ConstructArgList": ["int pin"], "Files": ["grove_ir_receiver.cpp", "grove_ir_receiver.h"], "ClassFile": "grove_ir_receiver.h", "Events": { "ir_recv_data_hex": "char *", "ir_recv_data_len": "uint8_t" }, "HasPowerOnFunc": false, "Reads": { "read_protocol_parameters": { "Raw": ["uint8_t *start_h", "uint8_t *start_l", "uint8_t *n_short", "uint8_t *n_long"], "Returns": [ ["uint8_t", "start_h"], ["uint8_t", "start_l"], ["uint8_t", "n_short"], ["uint8_t", "n_long"] ], "Arguments": [] }, "read_last_data_recved": { "Raw": ["uint16_t *len", "char **data"], "Returns": [ ["uint16_t", "len"], ["char *", "data"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": true, "IncludePath": "./grove_drivers/grove_ir_receiver", "Writes": {} }, { "SKU": "104020006", "GroveName": "Grove - LED Bar", "ImageURL": "http://www.seeedstudio.com/depot/images/product/104020006%201.jpg", "ClassName": "GroveLEDBar", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 22, "ConstructArgList": ["int pintx", "int pinrx"], "Files": ["grove_led_bar.cpp", "grove_led_bar.h"], "ClassFile": "grove_led_bar.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_bits": { "Raw": ["uint16_t *bits"], "Returns": [ ["uint16_t", "bits"] ], "Arguments": [] } }, "InterfaceType": "UART", "HasEvent": false, "IncludePath": "./grove_drivers/grove_led_bar", "Writes": { "write_toggle": { "Arguments": [ ["uint8_t", "led"] ] }, "write_level": { "Arguments": [ ["float", "level"] ] }, "write_single_led": { "Arguments": [ ["uint8_t", "led"], ["float", "brightness"] ] }, "write_bits": { "Arguments": [ ["uint16_t", "bits"] ] }, "write_orientation": { "Arguments": [ ["uint8_t", "green_to_red"] ] } } }, { "SKU": "104990089", "GroveName": "Grove-WS2812 LED Strip 60", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/4/4f346dc15724a7b5a5c1383253aeefc9.image.530x397.jpg", "ClassName": "GroveLedWs2812", "CanGetLastError": true, "HasPowerOffFunc": false, "ID": 23, "ConstructArgList": ["int pin"], "Files": ["grove_led_ws2812.cpp", "grove_led_ws2812.h"], "ClassFile": "grove_led_ws2812.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_led_ws2812", "Writes": { "write_clear": { "Arguments": [ ["uint8_t", "total_led_cnt"], ["char *", "rgb_hex_string"] ] }, "write_start_rainbow_flow": { "Arguments": [ ["uint8_t", "length"], ["uint8_t", "brightness"], ["uint8_t", "speed"] ] }, "write_segment": { "Arguments": [ ["uint8_t", "start"], ["char *", "rgb_hex_string"] ] }, "write_stop_rainbow_flow": { "Arguments": [] } } }, { "SKU": "101020038", "GroveName": "Grove-Magnetic Switch", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/c/c0/Magnetic_Switch.jpg/400px-Magnetic_Switch.jpg", "ClassName": "GroveMagneticSwitch", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 24, "ConstructArgList": ["int pin"], "Files": ["grove_magnetic_switch.cpp", "grove_magnetic_switch.h"], "ClassFile": "grove_magnetic_switch.h", "Events": { "mag_approached": "uint8_t" }, "HasPowerOnFunc": false, "Reads": { "read_approach": { "Raw": ["uint8_t *mag_approach"], "Returns": [ ["uint8_t", "mag_approach"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": true, "IncludePath": "./grove_drivers/grove_magnetic_switch", "Writes": {} }, { "SKU": "101020008", "GroveName": "Grove-Moisture", "ImageURL": "http://www.seeedstudio.com/wiki/images/c/ce/Moisture_sensor_.jpg", "ClassName": "GroveMoisture", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 25, "ConstructArgList": ["int pin"], "Files": ["grove_moisture.cpp", "grove_moisture.h", "grove_moisture_class.cpp", "grove_moisture_class.h"], "ClassFile": "grove_moisture_class.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_moisture": { "Raw": ["uint16_t *moisture"], "Returns": [ ["uint16_t", "moisture"] ], "Arguments": [] } }, "InterfaceType": "ANALOG", "HasEvent": false, "IncludePath": "./grove_drivers/grove_moisture", "Writes": {} }, { "SKU": "101020088", "GroveName": "Grove-Multichannel Gas Sensor", "ImageURL": "http://www.seeedstudio.com/wiki/images/2/28/Multi_sensor1.png", "ClassName": "GroveMultiChannelGas", "CanGetLastError": true, "HasPowerOffFunc": false, "ID": 26, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_multichannel_gas_mics6814.cpp", "grove_multichannel_gas_mics6814.h"], "ClassFile": "grove_multichannel_gas_mics6814.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_NH3": { "Raw": ["float *concentration_ppm"], "Returns": [ ["float", "concentration_ppm"] ], "Arguments": [] }, "read_CH4": { "Raw": ["float *concentration_ppm"], "Returns": [ ["float", "concentration_ppm"] ], "Arguments": [] }, "read_C4H10": { "Raw": ["float *concentration_ppm"], "Returns": [ ["float", "concentration_ppm"] ], "Arguments": [] }, "read_NO2": { "Raw": ["float *concentration_ppm"], "Returns": [ ["float", "concentration_ppm"] ], "Arguments": [] }, "read_C2H5OH": { "Raw": ["float *concentration_ppm"], "Returns": [ ["float", "concentration_ppm"] ], "Arguments": [] }, "read_H2": { "Raw": ["float *concentration_ppm"], "Returns": [ ["float", "concentration_ppm"] ], "Arguments": [] }, "read_C3H8": { "Raw": ["float *concentration_ppm"], "Returns": [ ["float", "concentration_ppm"] ], "Arguments": [] }, "read_CO": { "Raw": ["float *concentration_ppm"], "Returns": [ ["float", "concentration_ppm"] ], "Arguments": [] } }, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_multichannel_gas_mics6814", "Writes": {} }, { "SKU": "104030008", "GroveName": "Grove - OLED Display 1.12''", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/e/ea/Toled128642.jpg/400px-Toled128642.jpg", "ClassName": "GroveOLED12864", "CanGetLastError": true, "HasPowerOffFunc": false, "ID": 27, "ConstructArgList": ["int pinsda", "int pinscl"], "Files": ["grove_oled_12864.cpp", "grove_oled_12864.h"], "ClassFile": "grove_oled_12864.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "I2C", "HasEvent": false, "IncludePath": "./grove_drivers/grove_oled_12864", "Writes": { "write_clear": { "Arguments": [] }, "write_float": { "Arguments": [ ["uint8_t", "row"], ["uint8_t", "col"], ["float", "f"], ["uint8_t", "decimal"] ] }, "write_base64_string": { "Arguments": [ ["uint8_t", "row"], ["uint8_t", "col"], ["char *", "b64_str"] ] }, "write_scroll_right": { "Arguments": [ ["uint8_t", "start_row"], ["uint8_t", "end_row"], ["uint8_t", "speed"] ] }, "write_scroll_left": { "Arguments": [ ["uint8_t", "start_row"], ["uint8_t", "end_row"], ["uint8_t", "speed"] ] }, "write_string": { "Arguments": [ ["uint8_t", "row"], ["uint8_t", "col"], ["char *", "str"] ] }, "write_integer": { "Arguments": [ ["uint8_t", "row"], ["uint8_t", "col"], ["int32_t", "i"] ] }, "write_brightness": { "Arguments": [ ["uint8_t", "brightness"] ] }, "write_inverse_display": { "Arguments": [ ["uint8_t", "inverse_or_not"] ] }, "write_stop_scroll": { "Arguments": [] } } }, { "SKU": "101020020", "GroveName": "Grove-PIR Motion Sensor", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/b/bc0115270f17babe6373bce8ec1bfe8a.image.164x123.jpg", "ClassName": "GrovePIRMotion", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 28, "ConstructArgList": ["int pin"], "Files": ["grove_pir_motion.cpp", "grove_pir_motion.h"], "ClassFile": "grove_pir_motion.h", "Events": { "ir_moved": "int16_t" }, "HasPowerOnFunc": false, "Reads": { "read_approach": { "Raw": ["uint8_t *approach"], "Returns": [ ["uint8_t", "approach"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": true, "IncludePath": "./grove_drivers/grove_pir_motion", "Writes": {} }, { "SKU": "103020018", "GroveName": "Grove-Recorder", "ImageURL": "http://www.seeedstudio.com/depot/images/product/Grove%20Recorder.jpg", "ClassName": "GroveRecorder", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 29, "ConstructArgList": ["int pin"], "Files": ["grove_recorder.cpp", "grove_recorder.h"], "ClassFile": "grove_recorder.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_recorder", "Writes": { "write_play_once": { "Arguments": [] } } }, { "SKU": "103020005", "GroveName": "Grove_Relay", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/d/df3ef3f9ba7f58333235895c0d3c4fb2.image.530x397.jpg", "ClassName": "GroveRelay", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 30, "ConstructArgList": ["int pin"], "Files": ["grove_relay.cpp", "grove_relay.h"], "ClassFile": "grove_relay.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_relay", "Writes": { "write_onoff": { "Arguments": [ ["int", "onoff"] ] } } }, { "SKU": "101020017", "GroveName": "Grove-Rotary Angle Sensor", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/4/47c18125fbb4c9db7e3104f5a3b04ef5.image.530x397.jpg", "ClassName": "GroveRotaryAngle", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 31, "ConstructArgList": ["int pin"], "Files": ["grove_rotary_angle.cpp", "grove_rotary_angle.h"], "ClassFile": "grove_rotary_angle.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_angle": { "Raw": ["int *angle"], "Returns": [ ["int", "angle"] ], "Arguments": [] } }, "InterfaceType": "ANALOG", "HasEvent": false, "IncludePath": "./grove_drivers/grove_rotary_angle", "Writes": {} }, { "SKU": "316010005", "GroveName": "Grove-Servo", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/0/0f/Grove%E2%80%94Servo.jpg/600px-Grove%E2%80%94Servo.jpg", "ClassName": "GroveServo", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 32, "ConstructArgList": ["int pin"], "Files": ["grove_servo.cpp", "grove_servo.h"], "ClassFile": "grove_servo.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_servo", "Writes": { "write_angle": { "Arguments": [ ["int", "degree"] ] }, "write_angle_motion_in_seconds": { "Arguments": [ ["int", "degree"], ["int", "seconds"] ] } } }, { "SKU": "103020004", "GroveName": "Grove-Solid State Relay", "ImageURL": "http://www.seeedstudio.com/depot/bmz_cache/1/13c15e71c4bd4c0a0fce5faa0283f4c5.image.530x397.jpg", "ClassName": "GroveSolidStateRelay", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 33, "ConstructArgList": ["int pin"], "Files": ["grove_solid_relay.cpp", "grove_solid_relay.h"], "ClassFile": "grove_solid_relay.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_solid_relay", "Writes": { "write_onoff": { "Arguments": [ ["int", "onoff"] ] } } }, { "SKU": "103020012", "GroveName": "Grove - SPDT Relay(30A)", "ImageURL": "http://www.seeedstudio.com/depot/images/product/SPDT%20Relay.jpg", "ClassName": "GroveSPDTRelay30A", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 34, "ConstructArgList": ["int pin"], "Files": ["grove_spdt_relay_30a.cpp", "grove_spdt_relay_30a.h"], "ClassFile": "grove_spdt_relay_30a.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_spdt_relay_30a", "Writes": { "write_onoff": { "Arguments": [ ["int", "onoff"] ] } } }, { "SKU": "107020001", "GroveName": "Grove-Speaker", "ImageURL": "http://www.seeedstudio.com/depot/images/product/Grove%20Speaker_01.jpg", "ClassName": "GroveSpeaker", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 35, "ConstructArgList": ["int pin"], "Files": ["grove_speaker.cpp", "grove_speaker.h"], "ClassFile": "grove_speaker.h", "Events": {}, "HasPowerOnFunc": false, "Reads": {}, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_speaker", "Writes": { "write_sound_stop": { "Arguments": [] }, "write_sound_ms": { "Arguments": [ ["int", "freq"], ["int", "duration_ms"] ] }, "write_sound_start": { "Arguments": [ ["int", "freq"] ] } } }, { "SKU": "101020015", "GroveName": "Grove - Temperature Sensor", "ImageURL": "http://www.seeedstudio.com/wiki/images/5/5f/Grove_Temperature_Sensor_View.jpg", "ClassName": "GroveTemp", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 36, "ConstructArgList": ["int pin"], "Files": ["grove_temp.cpp", "grove_temp.h"], "ClassFile": "grove_temp.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_temp": { "Raw": ["float *temperature"], "Returns": [ ["float", "temperature"] ], "Arguments": [] } }, "InterfaceType": "ANALOG", "HasEvent": false, "IncludePath": "./grove_drivers/grove_temp", "Writes": {} }, { "SKU": "101020019-ffff", "GroveName": "Grove-Temperature&Humidity", "ImageURL": "http://www.seeedstudio.com/wiki/images/3/36/Temp%26Humi.jpg", "ClassName": "GroveTempHum", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 37, "ConstructArgList": ["int pin"], "Files": ["grove_temp_hum.cpp", "grove_temp_hum.h"], "ClassFile": "grove_temp_hum.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_humidity": { "Raw": ["float *humidity"], "Returns": [ ["float", "humidity"] ], "Arguments": [] }, "read_temperature": { "Raw": ["float *celsius_degree"], "Returns": [ ["float", "celsius_degree"] ], "Arguments": [] }, "read_temperature_f": { "Raw": ["float *fahrenheit_degree"], "Returns": [ ["float", "fahrenheit_degree"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_temp_hum", "Writes": {} }, { "SKU": "101020019", "GroveName": "Grove-Temperature&Humidity Pro", "ImageURL": "http://www.seeedstudio.com/wiki/images/7/75/Temp_humi_pro222.jpg", "ClassName": "GroveTempHumPro", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 38, "ConstructArgList": ["int pin"], "Files": ["grove_temp_hum_pro.cpp", "grove_temp_hum_pro.h"], "ClassFile": "grove_temp_hum_pro.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_humidity": { "Raw": ["float *humidity"], "Returns": [ ["float", "humidity"] ], "Arguments": [] }, "read_temperature": { "Raw": ["float *celsius_degree"], "Returns": [ ["float", "celsius_degree"] ], "Arguments": [] }, "read_temperature_f": { "Raw": ["float *fahrenheit_degree"], "Returns": [ ["float", "fahrenheit_degree"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_temp_hum_pro", "Writes": {} }, { "SKU": "101020010", "GroveName": "Grove - Ultrasonic Ranger", "ImageURL": "http://www.seeedstudio.com/wiki/images/thumb/3/3a/Ultrasonic_Ranger.jpg/350px-Ultrasonic_Ranger.jpg", "ClassName": "GroveUltraRanger", "CanGetLastError": false, "HasPowerOffFunc": false, "ID": 39, "ConstructArgList": ["int pin"], "Files": ["grove_ultrasonic_ranger.cpp", "grove_ultrasonic_ranger.h"], "ClassFile": "grove_ultrasonic_ranger.h", "Events": {}, "HasPowerOnFunc": false, "Reads": { "read_range_in_inch": { "Raw": ["float *range_inch"], "Returns": [ ["float", "range_inch"] ], "Arguments": [] }, "read_range_in_cm": { "Raw": ["float *range_cm"], "Returns": [ ["float", "range_cm"] ], "Arguments": [] } }, "InterfaceType": "GPIO", "HasEvent": false, "IncludePath": "./grove_drivers/grove_ultrasonic_ranger", "Writes": {} }]