iobroker.smartcontrol
Version:
Control devices smarter: by grouping, including triggers like motion, opening window, etc. and set target devices accordingly
109 lines • 7.09 kB
JSON
{
"Adapter Version": "适配器版本",
"Additional conditions": "附加条件",
"Always": "总是",
"Astro times 'night' and 'nightEnd'": "天文时间“ night”和“ nightEnd”",
"Cancel": "取消",
"Deactivate to define detailed criteria for execution": "停用以定义执行的详细标准",
"Device Name": "设备名称",
"Do not verify": "不验证",
"End": "结束",
"Enum Function Name": "枚举函数名称",
"Execute always": "始终执行",
"Execution": "执行",
"Execution settings for zone": "区域的执行设置",
"Fri": "周五",
"Further Adapter Options": "更多适配器选项",
"Further Options": "更多选择",
"Hello World": "你好，世界",
"Incorrect configuration": "配置错误",
"Input Validation": "输入验证",
"JSON state for recent successful zone activations": "近期成功成功激活区域的JSON状态",
"JSON states under .info": "JSON-Datenpunkte unter .info",
"Limit to rooms": "限于房间",
"Linked triggers": "链接触发器",
"Logging": "记录中",
"Mo": "莫",
"Motion sensors": "运动传感器",
"Name of condition": "条件名称",
"Name of motion sensor": "运动传感器名称",
"Name of trigger": "触发名称",
"Name of zone": "区域名称",
"Never if...": "永远不会...",
"Never switch if...": "如果...",
"Never switch off if...": "切勿在以下情况下关闭电源...",
"Never switch on if...": "切勿在以下情况下开机...",
"Number of entries in JSON states (0-500)": "JSON状态下的最大条目数（0-500）",
"Object ID under": "下的对象ID",
"Off after x sec": "x秒后关闭",
"Ok": "好",
"Other triggers": "其他触发因素",
"Sat": "周六",
"Sec": "秒",
"Second(s)": "秒",
"Select": "选择",
"Select 'never if...'": "选择“如果...则从不”",
"Select 'never switch on if...'": "选择“如果...则永远不要开机”",
"Select additional conditions": "选择其他条件",
"Select linked triggers": "选择链接的触发器",
"Select state": "选择州",
"Select target devices": "选择目标设备",
"Select triggers": "选择触发器",
"Start": "开始",
"State": "州",
"State of brightness": "亮度状态",
"State of condition": "状况",
"State of motion sensor": "运动状态传感器",
"State to switch device off": "状态以关闭设备",
"State to switch device on": "开启设备的状态",
"State under": "状态下",
"State value": "状态值",
"Sun": "太阳",
"Target devices": "目标设备",
"Target devices: objects": "目标设备：对象",
"Target devices: states": "目标设备：状态",
"Target off": "目标关闭",
"Targets: Enum functions": "目标：枚举函数",
"Targets: URLs": "目标：URL",
"Threshold": "阈",
"Thu": "周四",
"Time": "时间",
"Time based triggers": "基于时间的触发器",
"Time schedule and astro": "时间表和astro",
"Toggle": "切换",
"Trigger": "触发",
"Triggers": "扳机",
"Tue": "周二",
"URL for switching off": "关闭网址",
"URL for switching on": "开启网址",
"Value for 'off'": "“关闭”的值",
"Value for 'on'": "“ on”的值",
"Wed": "星期三",
"Zones": "区域",
"log.verifyOptions.header": "您的配置有误，请按以下步骤修复：",
"log.verifyOptions.info": "请注意，我们仅在此处检查是否存在至少一个活动表行以及是否在区域中定义了至少一个活动执行。保存这些选项后，将进行进一步的验证，这将重新启动适配器。因此，请确保检查ioBroker日志：任何其他错误将在此处显示。",
"new value": "新价值",
"off": "关",
"on": "上",
"overwrite options": "覆盖选项",
"tabMain.Doc": "该适配器的说明：",
"tabMain.Welcome": "欢迎使用智能控制适配器。当前的ioBroker论坛线程",
"tabOptions.extendedLogHeader": "扩展信息日志",
"tabOptions.extendedLogInfo": "如果停用，则日志（级别“ Info”）在适配器启动和停止/重新启动期间仅显示少量日志行，而所有其他信息仅显示在调试日志中。 ",
"tabOptions.inputValidationHeader": "还检查禁用的表行",
"tabOptions.inputValidationInfo": "激活此选项也会验证停用的表行的有效性（例如，状态是否存在等）。",
"tabOptions.jsonMaxEntriesInfo": "适配器提供状态<code> smartcontrol.x.info.log.zoneActivations.json </ code>和<code> smartcontrol.x.info.log。 ",
"tabOptions.nightEndInfo": "根据ioBroker管理员选项中设置的地理坐标，有时没有<code>night</code>和/或<code>nightEnd</code> ，例如在某些德国地区的夏天。如果激活此选项，则适配器将设置：night = '00：00'，nightEnd = '02：00'。",
"tabOptions.nightEndOpt": "设置0：00/2：00（如果无法使用Night / nightEnd）",
"tabOptions.notVerifyBriHeader": "如果区域开启，请勿验证亮度",
"tabOptions.notVerifyBriInfo": "对于运动传感器和关联的亮度状态，您可以在此处定义如果关联区域已打开，是否应忽略亮度。 <br>使用案例：“阈值”是亮度的上限阈值，超过该阈值时，触发运动传感器时适配器将不再打开。但是，如果运动传感器（例如）打开灯，这是不切实际的，因为如果打开灯并且“ Bri”很可能超过阈值，则不会检测到重复运动。 <br>激活此选项后，如果关联的区域已经打开，则不会检查亮度。",
"tabOptions.triggerAckHeader": "在用户状态（如javascript.x，0_userdata.0，Messwerte.0，alias.x）下触发状态",
"tabOptions.triggerAckInfo": "仅当确认（ack）= <code>true</code> （即，确认/确认状态）时，才触发适配器实例下的状态更改。 <br>对于javascript.x，0_userdata.0，Messwerte.0，alias.0等下的<strong>用户拥有状态</strong> ，您可以更改此行为。 <br> <strong>请注意：</strong>如果选择' Any（ack：true或ack：false）'，则如果ack：false且设置了ack：true之后不久，它可能会切换两次。但是， <i>如果同一触发器的最后一次触发时间少于x秒前</i> ，则此适配器使用“ <i>忽略触发器</i> ”选项来防止这种情况。",
"tabOptions.triggerAckOptAny": "任何（ack：true或ack：false）",
"tabOptions.triggerAckOptFalse": "ack：仅false（忽略ack：true）",
"tabOptions.triggerAckOptTrue": "ack：仅真（忽略ack：false）",
"tabOptions.triggerLimitHeader": "如果同一触发器的上一次触发时间少于x秒，则忽略触发器",
"tabOptions.triggerLimitInfo": "出于稳定性的原因，如果触发时间少于x秒，则忽略触发。您可以在此处调整此秒数。不允许少于1秒。",
"tabOptions.triggerLimitLabel": "至少需要1秒",
"will be generated automatically": "将自动生成"
}