iobroker.shelly
Version:
Integrate your Shelly devices into ioBroker via MQTT or CoAP
32 lines (31 loc) • 2.13 kB
JSON
{
"Allow to transfer errors if the adapter crash. Private data like usernames, passwords, tokens, ... will be NOT be transferd.": "如果适配器崩溃，则允许传输错误。用户名，密码，令牌等私密数据将不会被传输。",
"Auto update of new firmware": "自动更新新固件",
"COAP listen IP": "COAP监听IP",
"CoAP and HTTP": "CoAP 和 HTTP",
"CoAP settings": "CoAP设置",
"Default QoS": "默认服务质量",
"General settings": "常规设置",
"HTTP Password": "HTTP 密码",
"HTTP Username": "HTTP 用户名",
"Http Username and Http Password in section RESTRICTED LOGIN on your Shelly device": "您的Shelly设备上的RESTRICTED LOGIN部分中的Http用户名和Http密码",
"MQTT Listen IP": "MQTT监听IP",
"MQTT Password": "MQTT密码",
"MQTT Username": "MQTT用户名",
"MQTT and HTTP": "MQTT 和 HTTP",
"MQTT settings": "MQTT设置",
"Poll time in seconds": "以秒为单位的轮询时间",
"Shelly devices that shall not be displayed. Enter device id of Shelly like 8B22BD": "Shelly设备不显示..输入Shelly的设备ID，如8B22BD",
"Shelly protocol": "雪莉协议",
"Update objects even if there is no value change": "即使值没有变化也要更新对象",
"Log Debug Messages": "记录调试消息",
"You have to configure the same password on all devices": "您必须在所有设备上配置相同的密码",
"Save HTTP responses (for debugging)": "保存 HTTP 响应（用于调试）",
"CoAP ist supported by Gen1 devices, MQTT is supported by all devices (Gen1 and Gen2)": "Gen1 设备支持 CoAP，所有设备（Gen1 和 Gen2）都支持 MQTT",
"Must be configured on all Shelly devices": "必须在所有 Shelly 设备上配置",
"Will be used to authenticate against generation 1 devices": "将用于对第 1 代设备进行身份验证",
"User credentials for restricted login": "受限登录的用户凭据",
"Custom options": "自定义选项",
"Debugging (expert options)": "调试（专家选项）",
"MQTT Server options": "MQTT 服务器选项"
}