iobroker.netatmo-energy
Version:
Get and set data using Netatmo Energy API
263 lines • 13.5 kB
JSON
{
" Refreshed: ": " 刷新：",
". Please try again.": ".",
"... If you miss data please authenticate again!": "...... 如果你误用数据,请再次证明!",
"API Request - refresh all": "API 请求 - 全部刷新",
"API Request getmeasure:": "API请求getmeasure：",
"API Request getroommeasure:": "API请求getroommeasure：",
"API Request homesdata": "API请求房屋数据",
"API Request homesdata:": "API请求房屋数据：",
"API Request homestatus sent to API each": "API请求homestatus发送到API每个",
"API Request homestatus was sent to API each": "每个API请求homestatus已发送到API",
"API Request homestatus:": "API请求状态：",
"API Request setthermmode": "API 请求 setthermmode",
"API Request setthermpoint": "API请求setthermpoint",
"API Request swithhomeschedule:": "API请求swithhomeschedule：",
"API Request synchomeschedule:": "API请求同步时间表：",
"API Token": "API令牌",
"API changes applied": "已应用API更改",
"API request finished": "API请求已完成",
"API request not OK:": "API请求不正确：",
"API settings": "API设定",
"API-Request done!": "API-请求完成！",
"API-getmeasure request is missing parameters": "API-getmeasure请求缺少参数",
"API-getroommeasure request is missing parameters": "API-getroommeasure请求缺少参数",
"API-synchomeschedule request is missing parameters": "API-synchomeschedule 请求缺少参数",
"Actual payload:": "实际有效载荷：",
"Actual plan:": "实际计划：",
"Actual temperature:": "实际温度：",
"Adapter": "适配器",
"Adapter stopped": "适配器已停止",
"Anticipating": "期待",
"Apply": "申请",
"Authenticate with Netatmo": "使用 Netatmo 进行身份验证",
"Authentication information": "认证信息",
"Battery voltage:": "电池电压：",
"Boiler cable not used": "未使用锅炉电缆",
"Boiler cable used": "使用的锅炉电缆",
"Boiler historical data was retrieved from device": "从设备检索锅炉历史数据",
"Boiler historical data was retrieved from device address": "从设备地址检索锅炉历史数据",
"Call API directly": "直接调用API",
"Can not create channel: ": "无法创建频道：",
"Can not create device: ": "无法创建设备：",
"Can not get active heating plan!": "无法获得主动供暖计划！",
"Can not get active mode!": "无法进入活动模式！",
"Can not get active thermostat mode!": "无法获得主动恒温器模式！",
"Can not save data to objects: ": "无法将数据保存到对象：",
"Cannot parse stored user IDs from Telegram!": "无法从 Telegram 解析存储的用户 ID！",
"Cannot write token file: ": "传真: ",
"Changed schedule for your heating system to": "将加热系统的时间表更改为",
"Changed the thermmode manually": "手动更改热模式",
"Changed weekly schedule": "更改每周时间表",
"Changes are saved now!": "更改已保存！",
"Client ID from your Netatmo APP": "来自Netatmo APP的客户端ID",
"Client Secret ID from your Netatmo APP": "来自Netatmo APP的客户端密钥ID",
"Client-ID:": "客户编号：",
"Client-Secret-ID:": "客户机密ID：",
"Comfort boost requested": "要求提高舒适度",
"Connection": "联系",
"Connection timeout": "连接超时",
"Could not change room temperature!": "无法改变室温！",
"Did not get a tokencode:": "没有获得令牌代码：",
"Did not get url or payload!": "没有获得URL或有效载荷！",
"E-Mail": "电子邮件",
"Enable / Disable Notifications": "启用/禁用通知",
"Error getting new tokens from Netatmo: ": "从 Netatmo 获取新令牌时出错：",
"Error on OAuth callback: ": "O Auth 呼吁挫折: ",
"Error reading stored tokens: ": "装有下列文字:",
"Event triggered:": "事件触发：",
"Firmware:": "固件：",
"General settings": "常规设置",
"Get OAuth start link data: ": "Get OAuth开始连接数据: ",
"Get OAuth start link: ": "Get OAuth开始联系:",
"Hardware version:": "硬件版本：",
"Heating Plan:": "供暖计划：",
"Heating request": "加热要求",
"Home ID from your Netatmo Energy installation": "Netatmo Energy安装中的家庭ID",
"Home-ID:": "家庭ID：",
"Home:": "家：",
"Information": "资讯资讯",
"Invalid Parameter": "无效的参数",
"Login with Netatmo": "使用 Netatmo 登录",
"Logon information": "登录信息",
"Long Notifications": "长通知",
"Low battery": "低电量",
"Medium battery": "中号电池",
"Message": "信息",
"Message if battery goes low": "电池电量不足时的消息",
"Message if battery goes medium": "电池电量不足时的消息",
"Message if boiler anticipates": "如果锅炉预期的消息",
"Message if valve creates a heating request": "阀门创建加热请求时的消息",
"Message if valve lost connection": "阀门断开连接时的消息",
"Message if window is open": "窗口打开时的消息",
"Messages": "留言",
"Mode for your heating system was set to": "您的供暖系统的模式设置为",
"Mode set to home mode!": "模式设置为默认模式！",
"Mode:": "模式：",
"Module ID:": "模块编号：",
"Name": "姓名",
"Netatmo API request aborted": "Netatmo API请求中止",
"Netatmo API status false": "Netatmo API 状态为假",
"Netatmo API status:": "Netatmo API状态：",
"No Number": "没有号码",
"No tokens stored - Please use authentication in adapter config!": "如果没有储存的通行证,请在变压器上使用核证!",
"Notification Style": "通知样式",
"Notification only on errors": "仅在错误时通知",
"Notifications": "通知",
"Notifications by telegram": "电报通知",
"OAuth2 authentication methode": "OAuth2认证方式",
"Only one of client_id or client_secret was set, using default values!": "只有一个客户(id或客户_secret)才使用缺值!",
"Password from your Netatmo Account": "您的Netatmo帐户的密码",
"Password:": "密码：",
"Plug is connected to boiler": "插头连接到锅炉",
"Plug is not connected to boiler": "插头未连接到锅炉",
"Pushover": "俯卧撑",
"Pushover instance": "俯卧撑实例",
"Received OAuth start message: ": "收到OAuth开端信息: ",
"Refresh homestatus interval": "刷新本机状态间隔",
"Refresh states every x seconds": "每x秒刷新一次状态",
"Refresh whole structure:": "刷新整个结构：",
"Refreshing data in progress": "正在刷新数据",
"Rename": "改名",
"Request is missing parameters": "请求缺少参数",
"Request was sent to Netatmo Cloud": "请求已发送到 Netatmo Cloud",
"Request:": "请求：",
"Retrieved statistic for a specific room": "检索特定房间的统计信息",
"Retrieved statistic for a specific room number": "检索特定房间号的统计信息",
"Room temperature changed to ": "室温改为 ",
"Roomnumber:": "房间号：",
"SendMessage: ": "SendMessage: ",
"Set TempChanged manually": "手动设置TempChanged",
"Set room attributes": "设置房间属性",
"SetTemp: ": "设置温度：",
"Short Notifications": "简短通知",
"Signal": "Signal的",
"Signal instance": "Signal 实例",
"Signal strength:": "信号强度：",
"Silent Notice": "无声通知",
"Somebody stopped": "有人停了下来",
"Start API-request:": "启动API请求：",
"Start Token-Refresh": "开始令牌刷新",
"Start Token-request:": "启动令牌请求：",
"Start refresh request": "开始刷新请求",
"Status": "状态",
"Stored tokens belong to the different client ID": "被盗用物品属于不同的客户开发协会",
"Stored tokens have different scope": "被绑架者的范围不同",
"Target temperature changed": "目标温度已更改",
"Target temperature:": "目标温度：",
"Telegram": "电报",
"Telegram Receiver": "电报收件人",
"Telegram instance": "电报实例",
"Token OK:": "令牌确定：",
"Tokens updated successfully.": "令牌更新成功。",
"Update data in adapter configuration ... restarting ...": "更新适配器配置中的数据...重新启动...",
"Username from your Netatmo Account": "您的Netatmo帐户的用户名",
"Username:": "用户名:",
"Using stored tokens to initialize ... ": "使用储存的原状...... ",
"Vales": "阀门",
"Waiting for the send (seconds)": "发送前等待（秒）",
"Warning": "警告",
"WhatsApp": "WhatsApp的",
"WhatsApp instance": "WhatsApp 实例",
"Wifi strength:": "无线网络强度：",
"Window closed": "窗口关闭",
"Window open": "窗口打开",
"and not the configured scope": "a. 调整范围",
"and not to the configured ID ... deleting": "[删除]",
"anticipate": "预料",
"apply immediately": "立即施加温度",
"away": "离开",
"away from home": "离开家",
"changed manually": "手动更改",
"cleaned everything up...": "清理一切...",
"closed": "关闭",
"connected": "连接的",
"default mode": "默认模式",
"device ID (optional)": "设备 ID（可选）",
"disconnected": "断开连接",
"email instance": "电子邮件实例",
"email receiver": "电子邮件收件人",
"email sender": "电子邮件发件人",
"errors": "错误",
"for your heating system": "用于您的加热系统",
"frost guard": "“防冻罩”",
"Frost guardian": "冰霜守护者",
"full": "满的",
"heating not necessary": "不需要加热",
"heating requested": "要求加热",
"high": "高的",
"information": "资讯",
"information, errors": "信息，错误",
"information, warnings": "信息，警告",
"information, warnings, errors": "信息，警告，错误",
"low": "低的",
"manually": "手动",
"max": "最大限度",
"medium": "中等的",
"message type": "讯息类型",
"netatmo-energy adapter settings": "netatmo-energy的适配器设置",
"no notifications": "没有通知",
"not anticipating": "没有预料",
"notifications type": "通知类型",
"off": "离开",
"open": "打开",
"read API states immediately": "立即读取API状态",
"refresh": "刷新",
"refresh states after (sec):": "在（秒）后刷新状态：",
"save": "保存",
"schedule": "'时间表'",
"Scheduled": "时间表",
"seconds": "秒",
"select the types for notifications": "选择通知的类型",
"switchhomeschedule away from home": "离开家",
"switchhomeschedule frost guard": "霜卫士",
"switchhomeschedule schedule": "时间表",
"very low": "非常低",
"warnings": "警告",
"warnings, errors": "警告，错误",
"Create a thermostat weekly schedule": "每周设立动荡情况",
"API-createnewhomeschedule request is missing parameters": "API-增聘时间表是遗漏的参数。",
"API Request createnewhomeschedule:": "导 言 3. 请求设立新的表格:",
"Name of the schedule": "附表姓名",
"No temperature stored in sensor tab! ": "未在传感器上储存的温度!",
"Sensor actions": "补偿行动",
"Check window/door status": "检查站窗口/户籍状况",
"Window/Door sensor (type = boolean)": "Window/Door感器(role = #.window, #.door)",
"Check value from window/door sensor": "窗户/室传感器的检查价值",
"Actor to set temperature": "确定温度的代理",
"Window/Door sensor": "温得传感器",
"Value": "价值",
"Actor": "代理",
"Action": "行动",
"Action to perform": "采取行动",
"Set temp": "固定时间",
"Set Home-Mode": "建 议",
"Target temperature": "目标诱因",
"Set temperature of actor": "基调温度",
"Immediately": "立即",
"Synchronize temperature immediately": "温度立即同步",
"Delay": "拖延",
"Delay to perform action (seconds)": "推迟采取行动(二)",
"Temperature sensor is missing in adapter configuration to perform action: ": "变形组中缺乏帝国传感器,以采取行动: ",
"Wrong Sensor:": "Wrong Sensor:",
"You have to use a bool sensor!": "你们必须使用一个手枪!",
"Sensor action in": "诉讼",
"seconds!": "第二!",
"Sensor action aborted for": "诉讼",
"This is a test message!": "这是一种试验信息!",
"Test message has been sent!": "发射了试验信息!",
"Send test notification": "简历",
"Temperature control": "示范控制",
"Update data structure": "最新数据结构",
"Message services": "邮件事务",
"Message texts": "文 件",
"Reactions to sensor status changes": "对感情状况的反应",
"Token saved": "幸免",
"Bridge": "B. 桥梁",
"More details": "详情",
"Set home mode": "建 议",
"Enable / Disable sensor actions": "易感染感情行动",
"Additional functions": "其他职能",
"Only update datapoints if changes are detected": "只有在发现变化时才更新数据点",
"Change temperature states every time": "变化温度"
}