iobroker.lg-thinq
Version:
Adapter for LG ThinQ
753 lines (607 loc) • 25.4 kB
Markdown
# ioBroker.lg-thinq
[Back to README](/README.md)
# Introduction
The adapter creates all data points with the template from the data point `modelJsonUri` (deviation for devices) and uses the translation with the template from the data point `langPackModelUri` (deviation for devices). It is therefore possible that data points are created under REMOTE that have no function or are not available for the device.
# Summary
- [Instance Settings](#instance-settings)
- [Setting LG-Thinq](#instance-setting-lg-thinq)
- [Thinq1 Interval](#interval-thinq1-lg-thinq)
- [States](#states)
- [State Device 101 Refrigerator/Freezer](#device-101-refrigeratorfreezer-thinq1--thinq2)
- [Remote Statistic](#101-remote-statistic-thinq2)
- [Remote basic commands](#101-remote-control-thinq1--thinq2)
- [Snapshot](#101-snapshot-thinq1--thinq2)
- [State Device 201 Signature](#device-201-washer-signature-thinq2)
- [Remote basic commands](#201-remote-control-signature-thinq2)
- [State Device 201 Washer](#device-201-washer-thinq1--thinq2)
- [Remote Statistic](#201-remote-statistic-thinq2)
- [Remote basic commands](#201-remote-control-thinq1--thinq2)
- [Snapshot](#201-snapshot-thinq1--thinq2)
- [State Device 202 Dryer](#device-202-dryer-thinq1--thinq2)
- [Remote Statistic](#202-remote-statistic-thinq2)
- [Remote basic commands](#202-remote-control-thinq1--thinq2)
- [Snapshot](#202-snapshot-thinq1--thinq2)
- [State Device 401 air conditioner thinq2](#device-401-air-conditioner-thinq2)
- [Remote Statistic](#401-remote-statistic-thinq2)
- [Remote basic commands](#401-remote-control-thinq2)
- [Remote Holiday](#401-remote-holiday-thinq2)
- [Snapshot](#401-snapshot-thinq2)
- [State Device 401 air conditioner thinq1](#device-401-air-conditioner-thinq1)
- [Remote Statistic](#401-remote-statistic-thinq1)
- [Remote basic commands](#401-remote-control-thinq1)
- [Snapshot](#401-snapshot-thinq1)
- [State Device 406 Head pump](#device-406-heat-pump-thinq2)
- [Remote Statistic](#406-remote-statistic-thinq2)
- [Remote basic commands](#406-remote-basicctrl-thinq2)
- [Remote schedule settings](#406-remote-reservationctrl-thinq2)
- [Snapshot](#406-snapshot-thinq2)
- [Weather](#weather)
# Instance Settings
### Instance Setting LG-Thinq
[Summary](#summary)
- `LG ThinQ Email`: Enter APP email
- `LG ThinQ Password`: Enter APP password
- `Update interval in minutes`: Recommended: At 60 minutes. If interval thinq1 is set to 0 then here is 0.5/1 minute
- `Update interval in seconds for Thinq1 (per device 1 Second)`: Interval for thinq1 users
- `Country`: Enter country - default DE
- `Language`: Enter language - default de_DE
- `Platform`: Enter platform - default LGThinQ
- `Delete session data`: If there are problems with the login, please delete the session data (lg-thinq.0.session wird geleert)
### Interval thinq1 LG-Thinq
[Summary](#summary)
- `interval.active` How many devices are currently receiving updates
- `interval.inactive` How many devices are currently not receiving updates
- `interval.interval` Change interval from instance setting. After an adapter restart, the instance setting is applied.
- `interval.last_update` Latest update
- `interval.status_devices`
- `OK` Interval OK
- `Fail - 0100` Request fail - WorkID is recreated
- `Fail - 0106` Not conneted device - WorkID is recreated
- `Error` Error WorkID - WorkID is recreated
- `Error <code>` Unknown error - WorkID is recreated
- `Result Error` Receive error - WorkID is recreated
- `Parse error` Parse error - WorkID is recreated
- `Unknown` Unknown error - WorkID is recreated
- `Request` Receive is unknwon - WorkID is recreated
- `{}` Unknown - WorkID is recreated
# States
### Device 101 Refrigerator/Freezer thinq1 & thinq2
[Summary](#summary)
### 101 All Folders thinq1 & thinq2
### 101 Remote Folder thinq1 & thinq2
### 101 Remote Statistic thinq2
[Summary](#summary)
- `remote.Statistic.command` Which history should be loaded
- hourly
- `remote.Statistic.endDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- `remote.Statistic.startDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- Or daily
- `remote.Statistic.endDate` Enter date daily - Format: 2023.12.06
- `remote.Statistic.startDate` Enter date daily - Format: 2023.12.01
- Or monthly
- `remote.Statistic.endDate` Enter date monthly - Format: 2023.12.01
- `remote.Statistic.startDate` Enter date monthly - Format: 2023.10.01
- `remote.Statistic.period` Select period
- `remote.Statistic.sendRequest` Send selection
- `remote.Statistic.jsonResult` Statistics as JSON. If the attributes are empty then your device does not support them or an incorrect date was specified.
Example JSON Door open
```json
{
"item": [
{
"usedDate": "2023-11",
"doorType": "DID_DOOR",
"openCount": "0",
"openTime": "0"
},
{
"usedDate": "2023-12",
"doorType": "DID_DOOR",
"openCount": "0",
"openTime": "0"
},
{
"usedDate": "2023-11",
"doorType": "FREEZER_DOOR",
"openCount": "62",
"openTime": "713937"
},
{
"usedDate": "2023-12",
"doorType": "FREEZER_DOOR",
"openCount": "0",
"openTime": "0"
},
{
"usedDate": "2023-11",
"doorType": "FRIDGE_DOOR",
"openCount": "1037",
"openTime": "12421700"
},
{
"usedDate": "2023-12",
"doorType": "FRIDGE_DOOR",
"openCount": "27",
"openTime": "304857"
},
{
"usedDate": "2023-11",
"doorType": "CONVERTIBLE_DOOR",
"openCount": "0",
"openTime": "0"
},
{
"usedDate": "2023-12",
"doorType": "CONVERTIBLE_DOOR",
"openCount": "0",
"openTime": "0"
},
{
"usedDate": "2023-11",
"doorType": "ONE_DOOR",
"openCount": "0",
"openTime": "0"
},
{
"usedDate": "2023-12",
"doorType": "ONE_DOOR",
"openCount": "0",
"openTime": "0"
}
]
}
```
### 101 Remote Control thinq1 & thinq2
[Summary](#summary)
- `remote.expressMode` Express Mode on/off/rapid on -> thinq1 state snapshot.IcePlus
- `remote.freezerTemp` Change the temperature of the freezer (Celsius only)
- `remote.fridgeTemp` Change the temperature of the refrigerator (Celsius only)
### 101 Snapshot thinq1 & thinq2
[Summary](#summary)
### Device 201 Washer Signature thinq2
[Summary](#summary)
### 201 Remote Control Signature thinq2
- Can be controlled like the 201. However, the following values must be set in the `Course` folder.
- In the course folder: initialBit on INITIAL_BIT_ON
- In the course folder: remoteStart on REMOTE_START_ON
### Device 201 Washer thinq1 & thinq2
[Summary](#summary)
### 201 All Folders thinq1 & thinq2
### 201 Remote Folder thinq1 & thinq2
### 201 Remote Statistic thinq2
[Summary](#summary)
- hourly
- `remote.Statistic.endDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- `remote.Statistic.startDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- Or daily
- `remote.Statistic.endDate` Enter date daily - Format: 2023.12.06
- `remote.Statistic.startDate` Enter date daily - Format: 2023.12.01
- Or monthly
- `remote.Statistic.endDate` Enter date monthly - Format: 2023.12.01
- `remote.Statistic.startDate` Enter date monthly - Format: 2023.10.01
- `remote.Statistic.period` Select period
- `remote.Statistic.sendRequest` Send selection
- `remote.Statistic.jsonResult` Statistics as JSON. If the attributes are empty then your device does not support them or an incorrect date was specified.
```json
{
"count": 0,
"power": 0,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 0,
"item": [
{
"usedDate": "2023-12-04",
"count": 0,
"power": 0,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 0
},
{
"usedDate": "2023-12-05",
"count": 0,
"power": 0,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 0
},
{
"usedDate": "2023-12-06",
"count": 2,
"power": 2,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 2
},
{
"usedDate": "2023-12-07",
"count": 2,
"power": 2,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 2
},
{
"usedDate": "2023-12-08",
"count": 5,
"power": 5,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 5
},
{
"usedDate": "2023-12-09",
"count": 0,
"power": 0,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 0
},
{
"usedDate": "2023-12-10",
"count": 0,
"power": 0,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 0
}
]
}
```
### 201 Remote Control thinq1 & thinq2
[Summary](#summary)
- `remote.Favorite` Only works when a favorite has been selected in the APP and when the machine is turned on.
- `remote.LastCourse` The last 10 programs can be selected.
- `remote.WMDownload_Select` Selection of all available programs (STD=Standard/DL=Download programs)
When one of the 3 data points is filled, the selected program is written to the Course folder. You can then make adjustments here. However, not all data points in the `Course` folder can be changed. Please test for yourself which data the washing machine accepts.
- `remote.WMDownload` By pressing, the program in the 'Course' folder is transferred to the washing machine and shown on the display (washing machine must be on).
- `remote.WMStart` Start washer
- `remote.WMStop` Stop washer
- `remote.WMWakeup` Wake up washer
### 201 Snapshot thinq1 & thinq2
[Summary](#summary)
### Device 202 Dryer thinq1 & thinq2
[Summary](#summary)
### 202 All Folders thinq1 & thinq2
### 202 Remote Folder thinq1 & thinq2
### 202 Remote Statistic thinq2
[Summary](#summary)
- hourly
- `remote.Statistic.endDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- `remote.Statistic.startDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- Or daily
- `remote.Statistic.endDate` Enter date daily - Format: 2023.12.06
- `remote.Statistic.startDate` Enter date daily - Format: 2023.12.01
- Or monthly
- `remote.Statistic.endDate` Enter date monthly - Format: 2023.12.01
- `remote.Statistic.startDate` Enter date monthly - Format: 2023.10.01
- `remote.Statistic.period` Select period
- `remote.Statistic.sendRequest` Send selection
- `remote.Statistic.jsonResult` Statistics as JSON. If the attributes are empty then your device does not support them or an incorrect date was specified.
```json
{
"count": 0,
"power": 0,
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 0,
"item": [
{
"usedDate": "2023-12-08",
"count": 5,
"power": 2587, // 2587 / 1000 kwh
"energyWater": 0,
"energyDetergent": 0,
"energySoftener": 0,
"powerWh": 0,
"periodicEnergyData": 2587
}
]
}
```
### 202 Remote Control thinq1 & thinq2
[Summary](#summary)
- `remote.Favorite` Only works when a favorite has been selected in the APP and when the machine is turned on.
- `remote.LastCourse` The last 10 programs can be selected.
- `remote.WMDownload_Select` Selection of all available programs (STD=Standard/DL=Download programs)
When one of the 3 data points is filled, the selected program is written to the Course folder. You can then make adjustments here. However, not all data points in the `Course` folder can be changed. Please test for yourself which data the dryer accepts.
- `remote.WMDownload` No function
- `remote.WMStart` By pressing, the program in the 'Course' folder is transferred to the dryer and shown on the display (dryer must be on).
- `remote.WMStop` Stop Dryer
- `remote.WMWakeup` Wake up Dryer
### 202 Snapshot thinq1 & thinq2
[Summary](#summary)
### Device 401 Air conditioner thinq2
[Summary](#summary)
### 401 All Folders thinq2
### 401 Remote Folder thinq2
### 401 Remote Statistic thinq2
[Summary](#summary)
- `remote.Statistic.command` Which history should be loaded
- hourly
- `remote.Statistic.endDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- `remote.Statistic.startDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- Or daily
- `remote.Statistic.endDate` Enter date daily - Format: 2023.12.06
- `remote.Statistic.startDate` Enter date daily - Format: 2023.12.01
- Or monthly
- `remote.Statistic.endDate` Enter date monthly - Format: 2023.12.01
- `remote.Statistic.startDate` Enter date monthly - Format: 2023.10.01
- `remote.Statistic.period` Select period
- `remote.Statistic.sendRequest` Send selection
- `remote.Statistic.jsonResult` Statistics as JSON. If the attributes are empty then your device does not support them or an incorrect date was specified.
```json
[
{
"usedDate": "2023-04",
"energyData": "0",
"operationTime": "0"
},
{
"usedDate": "2023-05",
"energyData": "0",
"operationTime": "0"
},
{
"usedDate": "2023-06",
"energyData": "3800",
"operationTime": "13873"
}
]
```
### 401 Remote Control thinq2
[Summary](#summary)
- `remote.basicCtrl.operation` 0 for off and 1 for on
- `remote.basicCtrl.opMode` 0 for off and 4 for on
- `remote.basicCtrl.hotWater` 0 for off and 1 for on
- `remote.basicCtrl.hotWaterTarget` desired temperature
- `remote.basicCtrl.powerHotWater` Boost 0 for off and 1 for on
- `remote.basicCtrl.target` desired temperature
- If the error message 400 appears in the log, then this data point is not compatible with the device.
### 401 Remote Holiday thinq2
[Summary](#summary)
- `remote.break.holiday_silent_update` The current data must always be loaded from the cloud first.
- `remote.break.holiday_silent_data` Current schedule from the cloud.
- `remote.break.holiday_startdate` Enter the start date for vacation mode here. The date cannot be in the past (Format DD.MM.YY HH:MM)
- `remote.break.holiday_enddate` Enter the end date for vacation mode here. The date cannot be in the past and must be greater than the start date (Format DD.MM.YY HH:MM)
- `remote.break.holiday_heating` Heating on/off (as in the APP)
- `remote.break.holiday_water` Hot water on/off (as in the APP)
- `remote.break.holiday_onoff` Only the above mentioned Fill data points and then activate/deactivate vacation mode here
- `remote.break.silent_mode_starttime` Enter the start time for the low-noise mode here. (Format HH:MM)
- `remote.break.silent_mode_endtime` Enter the end time for quiet mode here. Of course it should be larger than the start date. (Format HH:MM)
- `remote.break.silent_mode_onoff` Enable/disable quiet mode
- `remote.break.holiday_sendJSON` Intended for experts only. The JSON has an array consisting of JSON Type 1, 2 and 3. 1 stands for the runtimes, 2 for vacation mode and type 3 for quiet mode. You could now add additional JSONs to Type 1 and thus generate more switching times.
### 401 Snapshot thinq2
[Summary](#summary)
### Device 401 Air conditioner thinq1
[Summary](#summary)
### 401 Remote Statistic thinq1
[Summary](#summary)
- hourly
- `remote.Statistic.endDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- `remote.Statistic.startDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- Or daily
- `remote.Statistic.endDate` Enter date daily - Format: 2023.12.06
- `remote.Statistic.startDate` Enter date daily - Format: 2023.12.01
- Or monthly
- `remote.Statistic.endDate` Enter date monthly - Format: 2023.12.01
- `remote.Statistic.startDate` Enter date monthly - Format: 2023.10.01
- `remote.Statistic.period` Select period
- `remote.Statistic.sendRequest` Send selection
- `remote.Statistic.jsonResult` Statistics as JSON. If the attributes are empty then your device does not support them or an incorrect date was specified.
- `remote.Statistic.ownrequest` Own query of data. Open the file from the `modelJsonUri` link and apply cmd, cmdOpt and value.
- `remote.Statistic.ownresponse` Result of `remote.Statistic.ownrequest`
```json
[
{
"month": 0,
"day": "03",
"hour": 0,
"min": "16",
"kwh": 0.1
},
{
"month": 0,
"day": "04",
"hour": 0,
"min": "59",
"kwh": 0.2
},
{
"month": 0,
"day": "06",
"hour": 0,
"min": "15",
"kwh": 0.1
},
{
"month": 0,
"day": "07",
"hour": 0,
"min": "40",
"kwh": 0.1
},
{
"month": 0,
"day": "09",
"hour": 0,
"min": "35",
"kwh": 0.2
},
{
"month": 0,
"day": "10",
"hour": 0,
"min": "60",
"kwh": 0.2
},
{
"month": 0,
"day": "11",
"hour": 0,
"min": "60",
"kwh": 0.2
},
{
"month": 0,
"day": "12",
"hour": 0,
"min": "90",
"kwh": 0.3
}
]
```
# ownrequest JSON
```json
{
"method": "POST", // POST or GET Axios Request
"url": "rti/rtiControl", // URL
"data": {
"lgedmRoot": {
"deviceId": null, // Adapter replaces null
"workId": null, // Adapter replaces null
"cmd": "Config", // Change possible
"cmdOpt": "Get", // Change possible
"value": "InOutInstantPower", // Change possible
"isControlFree": "Y" // DO NOT change
}
}
}
```
### 401 Remote Control thinq1
[Summary](#summary)
Which data points belong to set... data points is stated in the name of the data point.
lg-thinq.0.xxx.remote.SetWDirLeftRight -> {"`WDirLeftRight`":"{{WDirLeftRight}}","`WDirUpDown`":"0"}
- Turn on example:
- `remote.settings.Operation` set to 1
- `remote.SetOperation` then set this data point to true
- Turn off example:
- `remote.settings.Operation` set to 0
- `remote.SetOperation` then set this data point to true
- Example changing temperature:
- `remote.settings.TempCfg` Enter temperature
- `remote.SetTempCfg` then set this data point to true
- Other example:
- `remote.settings.WDirUpDown` set to 0
- `remote.settings.WDirLeftRight` 0 or 1
- `remote.SetWDirLeftRight` then set this data point to true
### 401 Snapshot thinq1
[Summary](#summary)
### Device 406 Heat pump thinq2
[Summary](#summary)
### 406 All Folders thinq2
### 406 Remote Folder thinq2
### 406 Remote Statistic thinq2
[Summary](#summary)
- `remote.Statistic.command` Which history should be loaded
- hourly
- `remote.Statistic.endDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- `remote.Statistic.startDate` Enter the date for hourly, end and start must be the same Format: 2023.12.01
- Or daily
- `remote.Statistic.endDate` Enter date daily - Format: 2023.12.06
- `remote.Statistic.startDate` Enter date daily - Format: 2023.12.01
- Or monthly
- `remote.Statistic.endDate` Enter date monthly - Format: 2023.12.01
- `remote.Statistic.startDate` Enter date monthly - Format: 2023.10.01
- `remote.Statistic.period` Select period
- `remote.Statistic.sendRequest` Send selection
- `remote.Statistic.jsonResult` Statistics as JSON. If the attributes are empty then your device does not support them or an incorrect date was specified.
### 406 Remote basicCtrl thinq2
[Summary](#summary)
- `remote.basicCtrl.hotWaterTarget` Setting the temperature
- `remote.basicCtrl.opMode` Set mode
### 406 Remote reservationCtrl thinq2
[Summary](#summary)
- `remote.reservationCtrl.add_new_schedule` Create a new schedule. 3 new data points will then be created that must be filled out. Then press `send_new_schedule` to save the new slot. If it is not sent, these new data points will be deleted after a restart.
- `remote.reservationCtrl.del_new_schedule` Delete a slot again. Then press `send_new_schedule` again so that the data is saved.
- `remote.reservationCtrl.send_new_schedule` Press to save changes.
- `remote.reservationCtrl.01_end Enddatum` Example 22:30.
- `remote.reservationCtrl.01_start Startdatum` Example 21:30.
- `remote.reservationCtrl.01_state` Enable/Disable
### 406 Snapshot thinq2
[Summary](#summary)
### Weather
[Summary](#summary)
lg-thinq.0.xxx.area must be filled!
- `weather.device` Choose area. If all devices have the same area, only one device is displayed.
- `weather.humidity` Humidity
- `weather.temperature` Temperature
- `weather.unit` Select Celsius or Fahrenheit
- `weather.update` Request an LG senden (device und unit müssen gefüllt sein!)
