iobroker.enocean
Version:
Connects EnOcean devices via USB/Serial devices with TCM300 Chips
65 lines • 2.98 kB
JSON
{
"EEP": [
"TF-13-07",
"TF-13-06"
],
"autocreate": false,
"teachin_method": "none",
"id_offset": true,
"deviceManager": {
"1": "#EltakoSeries14enterDeviceId",
"2": "#addDevicePredefined",
"3": {
"choice": {
"PCT14": {
"en": {
"0": "PCT14:",
"1": "Enter ioBroker sender ID in function group 3."
},
"de": {
"0": "PCT14:",
"1": "ioBroker Sender ID in Funktionsgruppe 3 eintragen."
}
},
"Manual": {
"en": {
"0": "On device:",
"1": "1. Set the upper rotary switch to the desired group.",
"2": "2. Set the lower rotary switch to GFVS.",
"3": "3. Then click on 'OK' to complete the process."
},
"de": {
"0": "Am Gerät:",
"1": "1. Den oberen Drehschalter auf die gewünschte Gruppe stellen.",
"2": "2. Den unteren Drehschalter auf GFVS stellen.",
"3": "3. Anschließend auf 'OK' klicken, um den Vorgang abzuschließen."
}
}
},
"label": {
"en": "How do you want to add the device?",
"de": "Wie möchten Sie das Gerät hinzufügen?"
}
},
"4": "#setState {CMD: 3}",
"5": {
"en": "Repeat for the other channels.",
"de": "Vorgang für die übrigen Kanäle Wiederholen."
}
},
"help": {
"en": {
"1": "Enter device ID. It consists of the base ID of the radio antenna module (e.g. FAM14) and the bus ID of the group. Base ID as decimal + Bus ID 1 = ID as decimal => converted to Hex. Example: (Hex: ffcae700) 4291487488 + 1 = 4291487489 => ffcae701",
"2": "Click on 'Add Device'",
"3": "Start teach-in mode on FDG14. (Tip: It is more convenient to set up with the PCT14 software) For more information, please read the FDG14 manual.",
"4": "Repeat for the other 7 groups."
},
"de": {
"1": "Geräte ID eintragen. Sie setzt sich aus der Basis ID des Funk-Antennenmodul (z.B. FAM14) und der Bus ID der Gruppe zusammen. Basis ID in Dezimal + Bus ID = ID als Dezimal => umgewandelt in Hex. Beispiel: (Hex: ffcae700) 4291487488 + 1 = 4291487489 => ffcae701.",
"2": "Auf 'Gerät Hinzufügen' klicken.",
"3": "Anlernmodus am FDG14 starten. (Tipp: Komfortabler ist die Einrichtung mit der Software PCT14) Für weitere informationen bitte die Anleitung des FDG14 lesen.",
"4": "Vorgang für die anderen 7 Gruppen Wiederholen."
}
},
"name": "FDG14"
}