iobroker.ecoflow-mqtt
Version:
connects to ecoflow products
140 lines (118 loc) • 6.44 kB
Markdown
# States for WAVE3
### version: 1.4.9
[RuntimePropertyUpload](#RuntimePropertyUpload)
[DisplayPropertyUpload](#DisplayPropertyUpload)
## RuntimePropertyUpload
### string
| State | Name |
|----------|------|
|displayPropertyFullUploadPeriod| display property full upload period |
## DisplayPropertyUpload
### string
| State | Name |
|----------|------|
|errcode| errcode |
|pcsFanLevel| pcs fan level |
|utcTimezoneId| utc timezone id |
|bmsErrCode| bms err code |
|pdErrCode| pd err code |
|plugInInfoDcpDetail| plug in info dcp detail |
|plugInInfoDcpResv| plug in info dcp resv |
|plugInInfoDcpSn| plug in info dcp sn |
|plugInInfoDcpFirmVer| plug in info dcp firm ver |
|plugInInfoDcpErrCode| plug in info dcp err code |
|tempPetCareWarning| temp Pet Care Warning |
|powerOffDelaySet| powerOffDelaySet |
|powerOffDelayRemaining| powerOffDelayRemaining |
### number
| State | Min | Max | Unit | Mult | Name |
|----------|:-------------:|:-------------:|:------:|:-----:|-----|
|powInSumW|0 | 8000 | W | 1 | Total input power |
|powOutSumW|0 | 8000 | W | 1 | Total output power |
|powGetQcusb1|0 | 120 | W | 1 | Real-time power of the USB 1 port |
|powGetTypec1|0 | 4000 | W | 1 | Real-time power of Type-C port 1 |
|powGetAc|0 | 8000 | W | 1 | Real-time AC power |
|powGetAcIn|0 | 8000 | W | 1 | Real-time AC input power |
|plugInInfoAcInFeq|50 | 60 | Hz | 1 | AC input frequency |
|currentTimeTaskV2Item|0 | 60 | A | 1 | current time task v2 item |
|utcTimezone|-1200 | 1200 | | 1 | utc timezone |
|powGetBms|0 | 8000 | W | 1 | pow get bms |
|plugInInfoAcOutDsgPowMax|0 | 4000 | W | 1 | Maximum AC discharging power |
|bmsBattSoc|0 | 100 | % | 1 | SOC of the main battery |
|bmsBattSoh|0 | 100 | % | 1 | SOH of the main battery |
|bmsDesignCap|0 | 80000 | mAh | 1 | Battery capacity |
|bmsDsgRemTime|0 | 15999 | min | 1 | Remaining discharging time |
|bmsChgRemTime|0 | 15999 | min | 1 | Remaining charging time of the main battery |
|bmsMinCellTemp|0 | 80 | °C | 1 | Minimum temperature of the main battery |
|bmsMaxCellTemp|0 | 80 | °C | 1 | Temperature of the main battery |
|bmsMinMosTemp|0 | 100 | °C | 1 | bms min mos temp |
|bmsMaxMosTemp|0 | 100 | °C | 1 | bms max mos temp |
|cmsBattSoc|0 | 100 | % | 1 | Overall SOC |
|cmsBattSoh|0 | 100 | % | 1 | Overall SOH |
|cmsDsgRemTime|0 | 15999 | min | 1 | Remaining discharging time |
|cmsChgRemTime|0 | 15999 | min | 1 | Remaining charging time |
|timeTaskChangeCnt|0 | 60 | | 1 | time task change cnt |
|plugInInfoPvDcAmpMax|0 | 60 | A | 1 | plug in info pv dc amp max |
|powGetPv|0 | 60 | W | 1 | pow get pv |
|plugInInfoPvChgAmpMax|0 | 60 | A | 1 | plug in info pv chg amp max |
|plugInInfoPvChgVolMax|0 | 60 | V | 1 | plug in info pv chg vol max |
|powGetDcp|0 | 60 | W | 1 | pow get dcp |
|plugInInfoAcInChgHalPowMax|0 | 2000 | W | 1 | Maximum AC charging power |
|tempAmbient|0 | n/a | °C | 1 | inlet temp? |
|humiAmbient|0 | n/a | % | 1 | humidity? |
|tempIndoorSupplyAir|0 | n/a | °C | 1 | outlet temp? |
|condensateWaterLevel|0 | 100 | % | 1 | condensateWaterLevel |
|powGetSelfConsume|0 | n/a | W | 1 | Power Self Consumtion |
### level
| State | Min | Max | Unit | Mult | Name | cmd |
|----------|:-------------:|:-------------:|:------:|:-----:|-----|------|
|lcdLight| 0 | 100 | % | 0.390625 | Screen brightness | {dest:2,cmdFunc:254,cmdId:17,dataLen:2} |
|devStandbyTime| 0 | 1440 | min | 1 | Device timeout (min) | {dest:2,cmdFunc:254,cmdId:17,dataLen:3} |
|screenOffTime| 0 | 1800 | s | 1 | Screen timeout (s) | {dest:2,cmdFunc:254,cmdId:17,dataLen:3} |
|plugInInfoAcInChgPowMax| 100 | 1500 | W | 1 | Maximum AC input power for charging | {dest:2,cmdFunc:254,cmdId:17,dataLen:7} |
|cmsMaxChgSoc| 50 | 100 | % | 1 | Charge limit | {dest:2,cmdFunc:254,cmdId:17,dataLen:3} |
|cmsMinDsgSoc| 0 | 30 | % | 1 | Discharge limit | {dest:2,cmdFunc:254,cmdId:17,dataLen:3} |
### diagnostic
| State | Name | values |
|----------|:-------------:|------|
|flowInfoQcusb1| USB output port 1 switch status | {0:off,2:on} |
|flowInfoTypec1| Type-C port 1 switch status | {0:off,2:on} |
|flowInfoAc2dc| flow info ac2dc | {0:off,2:on} |
|flowInfoAcIn| AC input switch status | {0:off,2:on} |
|plugInInfoAcInFlag| Indicates whether the AC charging port is connected | {0:disconnected,1:connected} |
|utcSetMode| utc set mode | {0:OK?} |
|flowInfoBmsDsg| flow info bms dsg | {0:off,2:on} |
|flowInfoBmsChg| flow info bms chg | {0:off,2:on} |
|plugInInfoAcChargerFlag| Indicates whether the charger is connected to the AC port | {0:not charging?,1:charging?} |
|devSleepState| Sleep status | {0:Off?,1:On?} |
|cmsBmsRunState| On/Off status | {0:off,1:on} |
|bmsChgDsgState| Charging/Discharging status of the main battery | {0:not charging or discharging,1:discharging,2:charging} |
|cmsChgDsgState| Charging/Discharging status | {0:not charging or discharging,1:discharging,2:charging} |
|timeTaskConflictFlag| time task conflict flag | {0:no conflict?,1:conflict?} |
|flowInfoPv| flow info pv | {0:OK?} |
|plugInInfoPvType| plug in info pv type | {0:OK?} |
|plugInInfoPvChargerFlag| plug in info pv charger flag | {0:OK?} |
|flowInfoDcpIn| flow info dcp in | {0:OK?} |
|flowInfoDcpOut| flow info dcp out | {0:OK?} |
|plugInInfoDcpInFlag| plug in info dcp in flag | {0:OK?} |
|plugInInfoDcpType| plug in info dcp type | {0:OK?} |
|plugInInfoDcpDsgChgType| plug in info dcp dsg chg type | {0:OK?} |
|plugInInfoDcpChargerFlag| plug in info dcp charger flag | {0:OK?} |
|plugInInfoDcpRunState| plug in info dcp run state | {0:OK?} |
|waveOperatingMode| Wave Operating Mode | {0:NULL,1:COOLING,2:HEATING,3:VENTING,4:DEHUMIDIFYING,5:THERMOSTATIC} |
|inDrainage| inDrainage | {0:off?,1:on?} |
|drainageMode| drainageMode | {0:off?,1:on?} |
|moodLightMode| moodLightMode | {0:off?,1:on?,2:dim?} |
|lcdShowTempType| lcdShowTempType | {0:off?,1:on?} |
|enPetCare| enPetCare | {0:off,1:on} |
|userTempUnit| Unit of Temperature | {0:not set?,1:°C (Celsius),2:°F (Fahrenheit)} |
|petCareWarning| petCareWarning | {0:off?,1:on?} |
### switch
| State | off | on | Name | cmd |
|----------|:-------------:|:------:|------|------|
|enBeep| off | on | Beeper on/off. (true: on, false: off.) | {dest:2,cmdFunc:254,cmdId:17,dataLen:2} |
### array
| State | Name |
|----------|------|
|waveModeInfo| wave mode info |
|devErrcodeList| device error code list |