iobroker.ecoflow-mqtt/admin/i18n/zh-cn.json

connects to ecoflow products

{
    "(Power) Stream Configuration": "（电源）流配置",
    "Alternator Configuration": "交流发电机配置",
    "Authentication settings": "认证设置",
    "Configuration for Rapid charger devices": "快速充电器设备的配置",
    "Configuration for not yet supported devices for debugging": "尚不支持调试设备的配置",
    "Connection": "联系",
    "Connection settings": "连接设置",
    "Create Login Data": "创建登录数据",
    "Credentials & Debug Settings": "凭据和调试设置",
    "Debug Quotas": "调试配额",
    "Debug unkn. msg": "调试未知。味精",
    "Device settings": "设备设置",
    "Device(s) Configuration": "设备配置",
    "Generator Configuration": "发电机配置",
    "Glacier Configuration": "冰川配置",
    "HA DEBUG settings": "HA 调试设置",
    "HA mqtt Url": "HA mqtt 网址",
    "HA mqtt port": "HA MQTT 端口",
    "HA mqtt protocol": "HA MQTT 协议",
    "HA mqtt pwd": "HA mqtt 密码",
    "HA mqtt user": "HA MQTT 用户",
    "HA topic prefix": "HA主题前缀",
    "Homeassistant": "家庭助理",
    "Homeassistant MQTT Authentication settings": "Homeassistant MQTT 身份验证设置",
    "If you are unsure, tick all checkboxes for all debug messages. (it is only effective when the adapter is in debug mode (see header of this admin page and the far right setting))": "如果您不确定，请勾选所有调试消息的所有复选框。 （仅当适配器处于调试模式时才有效（请参阅此管理页面的标题和最右侧的设置））",
    "MQTT Authentication settings": "MQTT 身份验证设置",
    "Please add (+) a device and configure it with its name, Serial Number (id) and it's type. If you have no device, delete the added line item": "请添加 (+) 设备并配置其名称、序列号 (id) 和类型。如果您没有设备，请删除添加的订单项",
    "Plug Configuration": "插头配置",
    "Power Kit Configuration": "电源套件配置",
    "Power Ocean Configuration": "动力海洋配置",
    "Power Station Configuration": "电站配置",
    "Selection of specific DEBUG settings (only effective on the device where debug is enabled)": "选择特定的DEBUG设置（仅在启用调试的设备上有效）",
    "Smart Home Panel Configuration": "智能家居面板配置",
    "Smartmeter Configuration": "智能电表配置",
    "Special Settings": "特殊设置",
    "Test connection": "测试连接",
    "Wave Configuration": "波形配置",
    "common DEBUG settings": "通用调试设置",
    "deviceId": "设备ID",
    "deviceName": "设备名称",
    "ecoflow account name / email  ": "ecoflow account name / email  ",
    "ecoflow-mqtt adapter settings": "ecoflow-mqtt的适配器设置",
    "enable check for reconnects (10min)": "启用重新连接检查（10 分钟）",
    "enable communication with Homeassistant MQTT Broker": "启用与 Homeassistant MQTT Broker 的通信",
    "enable logic to set 0 when no values is inside telegram (Energy and HeatingRod)": "当电报内没有值时启用逻辑设置 0（Energy 和 HeatingRod）",
    "mqtt broker": "MQTT 经纪人",
    "mqtt clientId": "mqtt 客户端 ID",
    "mqtt port": "MQTT 端口",
    "mqtt pwd": "mqtt 密码",
    "mqtt user name": "MQTT 用户名",
    "mqtt userId": "mqtt 用户 ID",
    "mqttBroker": "MQTT 经纪人",
    "msgCmd": "消息命令",
    "msgHaAutoDiscovery": "msgHa自动发现",
    "msgHaIncomming": "消息传入",
    "msgHaOutgoing": "msgHa传出",
    "msgHaStatusInitial": "msgHa 状态初始值",
    "msgSetGet": "消息集获取",
    "msgStateCreation": "消息状态创建",
    "msgUpdate": "消息更新",
    "msgUpdateValue": "消息更新值",
    "send retained msg for discovery": "发送保留的消息以供发现",
    "showDiscoveryObject": "显示发现对象",
    "user password": "用户密码",
    "userName": "用户名",
    "userPassword": "用户密码"
}