iobroker.e3dc-rscp
Version:
Control E3/DC power station via RSCP
414 lines (413 loc) • 18 kB
JSON
{
"A35_SERIAL_NUMBER": "A35序列号",
"ACTIVE_PHASES": "活跃期",
"AC_APPARENTPOWER": "交流视在功率[VA]",
"AC_CURRENT": "交流电流[A]",
"AC_ENERGY_ALL": "交流电源全部[千瓦时]",
"AC_ENERGY_GRID_CONSUMPTION": "交流电网消耗[千瓦时]",
"AC_MAX_APPARENTPOWER": "最大交流视在功率[VA]",
"AC_MAX_PHASE_COUNT": "交流相数",
"AC_POWER": "交流电力[W]",
"AC_REACTIVEPOWER": "交流无功功率[VA]",
"AC_VOLTAGE": "交流电压[V]",
"AD_MAX_APPARENT_POWER": "最大交流视在功率[VA]",
"ALIVE": "还活着",
"APP_SOFTWARE": "App软件",
"ASOC": "ASOC[%]",
"AUTARKY": "自动[%]",
"AUTHENTICATION": "验证",
"ActivePhases": "活动阶段数",
"BALANCED_PHASES": "平衡相位",
"BAT": "电池",
"BATTERY_BEFORE_CAR_MODE": "汽车模式前的电池",
"BATTERY_TO_CAR_MODE": "电池到汽车模式",
"BAT_CHARGE_LEVEL": "电池充电水平",
"BAT_CHARGE_LIMIT": "电池充电限制[W]",
"BAT_CYCLE_COUNT": "电池循环计数",
"BAT_DISCHARGE_LIMIT": "电池放电限制[W]",
"BAT_POWER_IN": "电池电量",
"BAT_POWER_OUT": "电池断电",
"BAT_SOC": "电池SOC[%]",
"BOARD_VERSION": "董事会版本",
"BOOTLOADER_SOFTWARE": "引导程序软件",
"CHARGE_CYCLES": "充电周期",
"CITY": "城市",
"CONSUMED_PRODUCTION": "消耗的生产，相对的",
"CONSUMPTION": "消耗功率",
"COUNTRY": "国家",
"COUPLING_MODE": "耦合方式",
"CURRENT": "安培数[A]",
"CarCharging": "汽车充电",
"CarChargingCanceled": "取消汽车充电",
"Connected": "连接的设备或服务",
"DB": "资料库",
"DCB_ALARM": "警报",
"DCB_CELL_TEMPERATURE": "电池温度[°C]",
"DCB_CELL_VOLTAGE": "电池电压[V]",
"DCB_CHARGE_HIGH_TEMPERATURE": "充电高温[°C]",
"DCB_CHARGE_LOW_TEMPERATURE": "充电低温[°C]",
"DCB_COUNT": "Deep Cycle Batteries数量",
"DCB_CURRENT": "电流[A]",
"DCB_CURRENT_AVG_30S": "目前平均30秒[A]",
"DCB_CYCLE_COUNT": "充电周期数",
"DCB_DATA_TABLE_VERSION": "数据表版本",
"DCB_DESIGN_CAPACITY": "设计容量[Ah]",
"DCB_DESIGN_VOLTAGE": "设计电压[V]",
"DCB_DEVICE_NAME": "设备名称",
"DCB_END_OF_DISCHARGE": "放电结束电压[V]",
"DCB_ERROR": "错误",
"DCB_FULL_CHARGE_CAPACITY": "全充电容量[Ah]",
"DCB_FW_VERSION": "固件版本",
"DCB_LAST_MESSAGE_TIMESTAMP": "最后消息时间戳[epoch]",
"DCB_MANUFACTURE_DATE": "制造日期",
"DCB_MANUFACTURE_NAME": "制造名称",
"DCB_MAX_CHARGE_CURRENT": "最大充电电流[A]",
"DCB_MAX_CHARGE_VOLTAGE": "最大充电电压[V]",
"DCB_MAX_DISCHARGE_CURRENT": "最大放电电流[A]",
"DCB_NR_PARALLEL_CELL": "并行单元数",
"DCB_NR_SENSOR": "传感器数量",
"DCB_NR_SERIES_CELL": "串联电池数量",
"DCB_PCB_VERSION": "PCB版本",
"DCB_PROTOCOL_VERSION": "协议版本",
"DCB_REMAINING_CAPACITY": "剩余容量[啊]",
"DCB_SERIALCODE": "串行代码",
"DCB_SERIALNO": "序列号",
"DCB_SOC": "充电状态[%]",
"DCB_SOH": "健康状况[%]",
"DCB_STATUS": "状况",
"DCB_VOLTAGE": "电压[V]",
"DCB_VOLTAGE_AVG_30S": "电压30秒平均[V]",
"DCB_WARNING": "警告",
"DCDC": "调节逆变器",
"DCDC_CHARGE_LIMIT": "DCDC充电限额[W]",
"DCDC_DISCHARGE_LIMIT": "DCDC放电限制[W]",
"DC_CURRENT": "直流电流[A]",
"DC_MAX_STRING_COUNT": "DC字符串数",
"DC_POWER": "直流电源[kW]",
"DC_STRING_ENERGY_ALL": "直流电能全部[千瓦时]",
"DC_VOLTAGE": "直流电压[V]",
"DEFAULT": "默认",
"DERATE_AT_PERCENT_VALUE": "以百分比值降额[%]",
"DERATE_AT_POWER_VALUE": "功率值降额[W]",
"DEVICE_CONNECTED": "设备连接",
"DEVICE_ID": "设备ID",
"DEVICE_IN_SERVICE": "使用中的设备",
"DEVICE_NAME": "设备名称",
"DEVICE_STATE": "设备状态",
"DEVICE_WORKING": "设备工作",
"DHCP_STATUS": "DHCP状态",
"DIAG_ERRORS": "DIAG错误",
"DIAG_INFOS": "DIAG资讯",
"DIAG_TEMP_1": "温度1",
"DIAG_TEMP_2": "温度2",
"DIAG_WARNINGS": "DIAG警告",
"DISCHARGE_START_POWER": "电池放电启动功率[W]",
"DNS": "DNS IP地址",
"DPP_MONTHS_ACTIVE": "几个月活跃[bitmask]",
"DPP_PRICE_BASED_BATTERY_CHARGE_ACTIVE": "基于价格的电池充电活动有效",
"DPP_PRICE_BASED_BATTERY_CHARGE_ENABLED": "启用了基于价格的电池充电",
"DPP_PRICE_BASED_WB_CHARGE_ACTIVE": "基于价格的Walbox充电活动活动",
"DPP_PRICE_LIMIT_BATTERY": "电池电池充电的价格限制[货币]",
"DPP_SOC_BATTERY": "SOC电池[％]",
"EMERGENCY_POWER": "应急电源",
"EMERGENCY_POWER_RETRY": "紧急电源重试",
"EMERGENCY_POWER_STATUS": "紧急电源状态",
"EMS": "能源管理系统",
"EMS_STATUS_0": "不允许收费",
"EMS_STATUS_1": "不允许放电",
"EMS_STATUS_2": "紧急电源可能",
"EMS_STATUS_3": "等待太阳突破（天气预报）",
"EMS_STATUS_4": "逆变器降额(更多PV功率可用)",
"EMS_STATUS_5": "充电空闲周期活动",
"EMS_STATUS_6": "放电空闲期活动",
"EMS_STATUS_7": "远程控制主动(农场)",
"EMS_STATUS_8": "达到紧急电源储备(电池充电保存为紧急电源)",
"EMS_STATUS_9": "电池训练活动",
"END_HOUR": "结束时间",
"END_MINUTE": "结束分钟",
"ENERGY_ALL": "能源全",
"ENERGY_L1": "L1 能量",
"ENERGY_L2": "L2 能量",
"ENERGY_L3": "L3 能量",
"ENERGY_SOLAR": "能源及太阳能",
"EOD_VOLTAGE": "放电结束电压[V]",
"EP": "应急电源",
"EPTEST_NEXT_TESTSTART": "应急电源下一次测试-启动",
"EPTEST_RUNNING": "应急电源测试运行",
"EPTEST_START_COUNTER": "应急电源测试启动计数器",
"ERROR_CODE": "错误代码",
"ERROR_MESSAGE": "错误消息",
"ERROR_SOURCE": "错误来源",
"ERROR_TIMESTAMP": "错误时间戳",
"ERROR_TYPE": "错误类型",
"EXTERN_DATA": "外部数据",
"EXTERN_DATA_ALG": "Extern数据alg",
"EXTERN_DATA_ALL": "Extern数据全部",
"EXTERN_DATA_NET": "外部数据网",
"EXTERN_DATA_SUN": "Extern数据太阳",
"EXT_SRC_AVAILABLE": "可用的外部源",
"E_MAIL": "电子邮件",
"FCC": "联邦通信委员会",
"FIRMWARE_VERSION": "固件版本",
"FLASH_VERSION": "Flash版本",
"FON": "电话号码",
"FPGA_FIRMWARE": "FPGA固件",
"FREQUENCY_OVER": "频率超过",
"FREQUENCY_UNDER": "频率下",
"FS_AVAILABLE": "可用的文件系统内存",
"FS_SIZE": "文件系统内存大小",
"FS_USED": "使用的文件系统内存",
"FS_USE_PERCENT": "使用的文件系统百分比",
"GATEWAY": "网关IP地址",
"GENERAL_ERROR": "一般错误",
"GET_PHASE_ELIMINATION": "获得相消除",
"GRAPH_INDEX": "图中的相对位置",
"GRID_POWER_IN": "电网供电",
"GRID_POWER_OUT": "电网电力",
"GUI_TARGET": "GUI目标",
"GridPower": "电网电力",
"HISTORY_DATA_DAY": "一天的数据",
"HISTORY_DATA_MONTH": "一个月的数据",
"HISTORY_DATA_WEEK": "一周数据",
"HISTORY_DATA_YEAR": "一年的数据",
"HW_VERSION": "硬件版本",
"IDLE_PERIOD_ACTIVE": "空闲周期活动",
"IDLE_PERIOD_DAY": "空闲时段日",
"IDLE_PERIOD_HOUR": "空闲时段小时",
"IDLE_PERIOD_MINUTE": "空闲时间分钟",
"IDLE_PERIOD_TYPE": "空闲周期类型",
"INFO": "资料",
"INODES": "I-节点总数",
"INODES_AVAILABLE": "I-节点可用",
"INODES_USED": "使用的i-节点",
"INODES_USE_PERCENT": "使用的i-节点百分比",
"INSTALLED_PEAK_POWER": "装机峰值功率[Wp]",
"IP_ADDRESS": "IP地址",
"IS_GRID_CONNECTED": "岛屿国家电网连接",
"IS_INVALID_STATE": "岛屿状态无效状态",
"IS_ISLAND_GRID": "岛屿国家岛屿网格",
"IS_POSSIBLE": "岛国可能",
"IS_READY_FOR_SWITCH": "岛屿国家准备转换",
"IS_SYSTEM_REBOOTING": "是系统重启",
"I_BAT": "电流电流",
"I_DCL": "电流到逆变器",
"Information": "资料",
"LAST_ERROR": "最后一个错误",
"MAC_ADDRESS": "MAC地址",
"MANUAL_CHARGE_ACTIVE": "手动充电",
"MANUAL_CHARGE_ENERGY": "手动充电能量",
"MANUAL_CHARGE_ENERGY_COUNTER": "手动充电能量计数器",
"MANUAL_CHARGE_LASTSTART": "手动充电最后一次启动",
"MANUAL_CHARGE_START_COUNTER": "手动充电启动计数器",
"MAX_BAT_VOLTAGE": "最大电池电压[V]",
"MAX_CHARGE_CURRENT": "最大充电电流[A]",
"MAX_CHARGE_POWER": "最大电池充电功率 [W]",
"MAX_DCB_CELL_TEMPERATURE": "最高DCB电池温度[°C]",
"MAX_DISCHARGE_CURRENT": "最大放电功率[W]",
"MAX_DISCHARGE_POWER": "最大电池放电功率 [W]（绝对值）",
"MAX_TEMPERATURE": "最高温度[°C]",
"MIN_DCB_CELL_TEMPERATURE": "最低DCB电池温度[°C]",
"MIN_TEMPERATURE": "最低温度[°C]",
"MODE": "模式",
"MODULE": "模块",
"MODULE_VOLTAGE": "模块电压 [V]",
"NAME": "姓名",
"ON_GRID": "在网格上",
"OVERRIDE_AVAILABLE_POWER": "覆盖可用电源",
"PARAM_1": "参数1",
"PARAM_2": "参数2",
"PARAM_EP_RESERVE": "紧急电源储备[Wh]",
"PARAM_EP_RESERVE_ENERGY": "应急能量储备、目标能量",
"PARAM_EP_RESERVE_MAX_ENERGY": "应急能量储备，最大能量",
"PARAM_LAST_SOC": "最后一个SOC",
"PARAM_NO_REMAINING_RETRY": "没有剩余重试次数",
"PARAM_TIME_LAST_EMPTY": "最新电池空时间戳",
"PARAM_TIME_LAST_FULL": "最新电池完整时间戳",
"PARAM_TIME_TO_RETRY": "重试时间",
"PERIOD_ACTIVE": "启用了空闲周期",
"PERIOD_DESCRIPTION": "空闲时期描述",
"PERIOD_START": "闲置的开始时间",
"PERIOD_STOP": "闲置时期的结束时间",
"PERIOD_WEEKDAYS": "分配空闲期的工作日",
"PM": "功率计",
"PM_0_POWER": "PM0功率",
"PM_1_POWER": "PM1功率",
"PM_ACTIVE_PHASES": "PM活动阶段",
"PM_DEVICE_ID": "PM设备id",
"PM_DEVICE_STATE": "PM设备状态",
"PM_DEVICE_STATE_CONNECTED": "PM设备状态已连接",
"PM_DEVICE_STATE_IN_SERVICE": "Pm设备状态在服务中",
"PM_DEVICE_STATE_WORKING": "PM设备状态工作",
"PM_ENERGY_L1": "PM能量L1",
"PM_ENERGY_L2": "PM能量L2",
"PM_ENERGY_L3": "PM能源L3",
"PM_ERROR_CODE": "PM错误代码",
"PM_FIRMWARE_VERSION": "PM固件版本",
"PM_MAX_PHASE_POWER": "迪亚格*马克斯。 相功率",
"PM_MODE": "PM模式",
"PM_POWER_L1": "PM功率L1",
"PM_POWER_L2": "PM功率L2",
"PM_POWER_L3": "PM功率L3",
"POSTCODE": "邮政编码",
"POWERSAVE_ENABLED": "启用省电模式",
"POWER_ADD": "功率增加[W]",
"POWER_BAT": "电池功率 [W]",
"POWER_GRID": "来自电网的功率 [W]",
"POWER_HOME": "回家的电源 [W]",
"POWER_L1": "L1 电源",
"POWER_L2": "L2 功率",
"POWER_L3": "L3 电源",
"POWER_LIMITS_USED": "使用的功率限制",
"POWER_MODE": "电源模式",
"POWER_PV": "光伏发电 [W]",
"POWER_WB_ALL": "电源壁箱总[W]",
"POWER_WB_SOLAR": "太阳能墙箱[W]",
"PRODUCTION_DATE": "生产日期",
"PVI": "光伏逆变器",
"PVI_RELEASE": "PVI释放",
"P_BAT": "电池电源",
"P_DCL": "逆变器的电源",
"PowerLimitation": "充电功率的限制",
"PrechargePercent": "预充电百分比",
"RC": "RC",
"READY_FOR_SHUTDOWN": "准备关机",
"RELEASE": "发行版",
"REMAINING_BAT_CHARGE_POWER": "电池剩余电量[W]",
"REMAINING_BAT_DISCHARGE_POWER": "电池剩余放电功率[W]",
"RESTART_APPLICATION": "重新启动应用程序",
"RETURN_CODE": "返回码",
"ROLE": "角色",
"RSCP": "远程存储控制协议",
"RSOC": "计算的 SOC [%]",
"RSOC_REAL": "计算实际SOC[%]",
"SELF_CONSUMPTION": "自我消耗[%]",
"SERIAL_NUMBER": "序列号",
"SET_POWER": "设定功率[W]",
"SET_POWER_MODE": "电源模式（出站）",
"SET_POWER_VALUE": "设定功率(出站)[W]",
"SOC": "充电状态",
"SPECIFIED_CAPACITY": "指定容量[西]",
"SPECIFIED_CHARGE_POWER": "指定充电功率[W]",
"SPECIFIED_DISCHARGE_POWER": "指定放电功率[W]",
"SPECIFIED_MAX_DCB_COUNT": "指定的最大DCB计数",
"START_EMERGENCY_POWER_TEST": "启动应急电源测试",
"START_HOUR": "开始时间",
"START_MINUTE": "开始分钟",
"STATE": "国家",
"STATE_AS_STRING": "状态字符串",
"STATUS": "状况",
"STATUS_CODE": "状态代码",
"STREET": "街道",
"STREET_NO": "街道号码",
"SUBNET_MASK": "子网掩码",
"SUBSTATE": "取代",
"SUBSTATE_AS_STRING": "取代字符串",
"SURNAME": "姓",
"SW_RELEASE": "软件发布",
"SYS": "系统",
"SYSTEM_MODE": "系统模式",
"SYSTEM_REBOOT": "系统重启",
"SunMode": "太阳模式或混合模式",
"SunPower": "太阳能发电",
"TEMPERATURE": "温度",
"TEMPERATURE_COUNT": "温度值数",
"TERMINAL_VOLTAGE": "端子电压[V]",
"TIME": "时间",
"TIMESTAMP": "时间戳",
"TIME_INTERVAL": "时间间隔",
"TIME_SPAN": "数据跨度",
"TIME_START": "开始时间",
"TIME_ZONE": "时区",
"TOTAL_DISCHARGE_TIME": "总放电时间",
"TOTAL_USE_TIME": "总使用时间",
"TRAINING_MODE": "培训模式",
"TYPE": "类型",
"ToggleChargingType2": "切换类型2充电过程",
"TogglePhases": "切换阶段",
"TotalPower": "总功率",
"Type2Locked": "2型插头锁定",
"USABLE_CAPACITY": "可用容量[啊]",
"USABLE_REMAINING_CAPACITY": "可用剩余容量[Ah]",
"USED_CHARGE_LIMIT": "使用收费限额[W]",
"USED_DISCHARGE_LIMIT": "使用的排放限值[W]",
"UTC_TIME": "时间UTC",
"U_BAT": "电池电压",
"U_DCL": "电压到逆变器",
"VALUE": "价值",
"VERSION": "版本",
"VERSION_MAIN": "主版本",
"VERSION_PIC": "PIC版本",
"VOLTAGE_L1": "L1 电压",
"VOLTAGE_L2": "L2 电压",
"VOLTAGE_L3": "L3 电压",
"VOLTAGE_MONITORING_SLOPE_DOWN": "电压监测斜率下降",
"VOLTAGE_MONITORING_SLOPE_UP": "电压监测斜率上升",
"VOLTAGE_MONITORING_THRESHOLD_BOTTOM": "电压监测阈值底部",
"VOLTAGE_MONITORING_THRESHOLD_TOP": "电压监测阈值顶部",
"WB": "壁装箱",
"WB_DISCHARGE_BAT_UNTIL": "B. 通过隔离墙的包袱",
"WB_ENFORCE_POWER_ASSIGNMENT": "B. 通过挂图的预防电池的释放",
"WEATHER_REGULATED_CHARGE_ENABLED": "启用天气调节收费",
"column_interval": "轮询间隔",
"column_tag": "请求标签名称",
"e3dc-rscp adapter settings": "e3dc-rscp的适配器设置",
"e3dc_ip": "E3/DC IP地址",
"e3dc_port": "E3/DC端口",
"hybridModeSupported": "支持混合模式",
"installedBatteryCapacity": "电池装机容量[Wh]",
"lazy_setstate": "惰性 setState() 调用",
"maxAcPower": "最大交流电力[W]",
"maxBatChargePower": "最大战斗充电功率[W]",
"maxBatDischargPower": "最大电池放电功率[W]",
"maxChargePower": "最大充电功率[W]",
"maxDischargePower": "最大放电功率[W]",
"maxFbcChargePower": "最大FCB充电功率[W]",
"maxFbcDischargePower": "最大FCB放电功率[W]",
"maxPvPower": "最大FCB放电功率[W]",
"maxStartChargePower": "最大启动充电功率[W]",
"maxStartDischargePower": "最大启动放电功率[W]",
"maxindex_bat": "蝙蝠（电池）",
"maxindex_dcdc": "DCDC（电池逆变器）",
"maxindex_pm": "index2（版本2个时期）",
"maxindex_pvi": "PVI（电源逆变器）",
"maxindex_wb": "WB（Wallbox）",
"minStartChargePower": "最小启动充电功率[W]",
"minStartDischargePower": "最小启动放电功率[W]",
"options": "选项",
"periods_v1": "闲置时期1",
"periods_v1_tooltip": "空闲时期1版，如旧的E3/DC门户网站所示。在同一天不支持超过一个时期。",
"periods_v1v2": "建议仅使用一个空闲时期版本之一，因为它们以非平凡的方式相互影响。",
"periods_v2": "空闲时期2版2",
"periods_v2_tooltip": "如新的E3/DC门户网站所示，在2024年，引入了空闲时期2版。在同一天可能有多个时期。",
"polling_interval_long": "轮询间隔长[h]",
"polling_interval_medium": "轮询间隔介质[m]",
"polling_interval_short": "轮询间隔短[s]",
"polling_intervals": "轮询间隔",
"portal_password": "E3/DC门户密码",
"portal_user": "E3/DC门户用户",
"query_bat": "EMS(能源管理系统)",
"query_db": "数据库(数据库)",
"query_dcdc": "DCDC（电池逆变器）",
"query_ems": "EMS(能源管理系统)",
"query_ep": "EMS(能源管理系统)",
"query_info": "INFO（信息）",
"query_pm": "PM（功率计）",
"query_pvi": "EMS(能源管理系统)",
"query_sys": "系统(系统)",
"query_wb": "WB(壁盒)",
"recommendedMinChargeLimit": "建议最低收费限额[W]",
"recommendedMinDischargeLimit": "建议最低排放限值[W]",
"rscp_password": "E3/DC RSCP密码",
"send_tuple_delay": "元组发送延迟[s]",
"setidleperiod_delay": "SET_IDLE_PERIOD延迟[s]",
"setpower_interval": "SET_POWER重新发送间隔[s]",
"startChargeDefault": "启动收费默认值[W]",
"startDischargeDefault": "启动放电默认值[W]",
"title_connection": "设置E3/DC连接",
"title_intervals": "设置查询和重新发送的时间间隔",
"title_maxindex": "最大限度。组件数量（用于初始化）",
"title_misc": "各种各样的",
"title_namespaces": "选择E3/DC命名空间以查询数据",
"title_polling_intervals": "微调数据轮询间隔",
"title_polling_intervals_table": "每个 RSCP 标签的轮询间隔"
}