iobroker.e3dc-rscp
Version:
Control E3/DC power station via RSCP
414 lines (413 loc) • 18.6 kB
JSON
{
"A35_SERIAL_NUMBER": "A35 serial number",
"ACTIVE_PHASES": "Active phases",
"AC_APPARENTPOWER": "AC apparent power",
"AC_CURRENT": "AC current",
"AC_ENERGY_ALL": "AC energy all",
"AC_ENERGY_GRID_CONSUMPTION": "AC energy grid consumption",
"AC_MAX_APPARENTPOWER": "Maximum AC apparent power",
"AC_MAX_PHASE_COUNT": "Number of AC phases",
"AC_POWER": "AC power",
"AC_REACTIVEPOWER": "AC reactive power",
"AC_VOLTAGE": "AC voltage",
"AD_MAX_APPARENT_POWER": "Maximum AC apparent power",
"ALIVE": "Alive",
"APP_SOFTWARE": "App software",
"ASOC": "State of Health",
"AUTARKY": "Autarky",
"AUTHENTICATION": "Authentication",
"ActivePhases": "Number of active phases",
"BALANCED_PHASES": "Balanced phases",
"BAT": "Battery",
"BATTERY_BEFORE_CAR_MODE": "Battery before car mode",
"BATTERY_TO_CAR_MODE": "Battery to car mode",
"BAT_CHARGE_LEVEL": "Battery charge level",
"BAT_CHARGE_LIMIT": "Battery charge limit",
"BAT_CYCLE_COUNT": "Battery cycle count",
"BAT_DISCHARGE_LIMIT": "Battery discharge limit",
"BAT_POWER_IN": "Battery energy in",
"BAT_POWER_OUT": "Battery energy out",
"BAT_SOC": "State of Charge",
"BOARD_VERSION": "Board version",
"BOOTLOADER_SOFTWARE": "Bootloader software",
"CHARGE_CYCLES": "Charge cycles",
"CITY": "City",
"CONSUMED_PRODUCTION": "Consumed production, relative",
"CONSUMPTION": "Consumed energy",
"COUNTRY": "Country",
"COUPLING_MODE": "Coupling mode",
"CURRENT": "Amperage",
"CarCharging": "Car Charging",
"CarChargingCanceled": "Charging of the car cancelled",
"Connected": "Device or service connected",
"DB": "Database",
"DCB_ALARM": "Alarm",
"DCB_CELL_TEMPERATURE": "Cell temperature",
"DCB_CELL_VOLTAGE": "Cell voltage",
"DCB_CHARGE_HIGH_TEMPERATURE": "Charge high temperature",
"DCB_CHARGE_LOW_TEMPERATURE": "Charge low temperature",
"DCB_COUNT": "Number of Deep Cycle Batteries",
"DCB_CURRENT": "Current",
"DCB_CURRENT_AVG_30S": "Current 30 seconds average",
"DCB_CYCLE_COUNT": "Number of charging cycles",
"DCB_DATA_TABLE_VERSION": "Data table version",
"DCB_DESIGN_CAPACITY": "Design capacity",
"DCB_DESIGN_VOLTAGE": "Design voltage",
"DCB_DEVICE_NAME": "Device name",
"DCB_END_OF_DISCHARGE": "End of discharge voltage",
"DCB_ERROR": "Error",
"DCB_FULL_CHARGE_CAPACITY": "Full charge capacity",
"DCB_FW_VERSION": "Firmware version",
"DCB_LAST_MESSAGE_TIMESTAMP": "Last message timestamp",
"DCB_MANUFACTURE_DATE": "Manufacture date",
"DCB_MANUFACTURE_NAME": "Manufacture name",
"DCB_MAX_CHARGE_CURRENT": "Maximum charge current",
"DCB_MAX_CHARGE_VOLTAGE": "Maximum charge voltage",
"DCB_MAX_DISCHARGE_CURRENT": "Maximum discharge current",
"DCB_NR_PARALLEL_CELL": "Number of cells in parallel",
"DCB_NR_SENSOR": "Number of sensors",
"DCB_NR_SERIES_CELL": "Number of cells in series",
"DCB_PCB_VERSION": "PCB version",
"DCB_PROTOCOL_VERSION": "Protocol version",
"DCB_REMAINING_CAPACITY": "Remaining capacity",
"DCB_SERIALCODE": "Serial code",
"DCB_SERIALNO": "Serial number",
"DCB_SOC": "State of charge",
"DCB_SOH": "State of health",
"DCB_STATUS": "Status",
"DCB_VOLTAGE": "Voltage",
"DCB_VOLTAGE_AVG_30S": "Voltage 30 seconds average",
"DCB_WARNING": "Warning",
"DCDC": "DC-DC converter",
"DCDC_CHARGE_LIMIT": "DCDC charge limit",
"DCDC_DISCHARGE_LIMIT": "DCDC discharge limit",
"DC_CURRENT": "DC current",
"DC_MAX_STRING_COUNT": "Number of DC strings",
"DC_POWER": "Produced PV energy",
"DC_STRING_ENERGY_ALL": "DC energy all",
"DC_VOLTAGE": "DC voltage",
"DEFAULT": "DEFAULT",
"DERATE_AT_PERCENT_VALUE": "Derate at percent value",
"DERATE_AT_POWER_VALUE": "Derate at power value",
"DEVICE_CONNECTED": "Device connected",
"DEVICE_ID": "Device ID",
"DEVICE_IN_SERVICE": "Device in service",
"DEVICE_NAME": "Device name",
"DEVICE_STATE": "Device state",
"DEVICE_WORKING": "Device working",
"DHCP_STATUS": "DHCP status",
"DIAG_ERRORS": "DIAG errors",
"DIAG_INFOS": "DIAG infos",
"DIAG_TEMP_1": "DIAG temp 1",
"DIAG_TEMP_2": "DIAG temp 2",
"DIAG_WARNINGS": "DIAG warnings",
"DISCHARGE_START_POWER": "Battery discharge starting power",
"DNS": "DNS IP address",
"DPP_MONTHS_ACTIVE": "Months active",
"DPP_PRICE_BASED_BATTERY_CHARGE_ACTIVE": "Price based battery charging is active",
"DPP_PRICE_BASED_BATTERY_CHARGE_ENABLED": "Price based battery charging is enabled",
"DPP_PRICE_BASED_WB_CHARGE_ACTIVE": "Price based wallbox charging is active",
"DPP_PRICE_LIMIT_BATTERY": "Price limit for charging battery from grid",
"DPP_SOC_BATTERY": "SOC battery [%]",
"EMERGENCY_POWER": "Emergency power",
"EMERGENCY_POWER_RETRY": "Emergency power retry",
"EMERGENCY_POWER_STATUS": "Emergency power status",
"EMS": "Energy Management System",
"EMS_STATUS_0": "Charging not allowed",
"EMS_STATUS_1": "Discharging not allowed",
"EMS_STATUS_2": "Emergency power possible",
"EMS_STATUS_3": "Waiting for sun breakthrough (weather forecast)",
"EMS_STATUS_4": "Inverter derated (more PV power available)",
"EMS_STATUS_5": "Charge idle period active",
"EMS_STATUS_6": "Discharge idle period active",
"EMS_STATUS_7": "Remote control active (farm)",
"EMS_STATUS_8": "Emergency power reserve reached (battery charge is saved for emergency power)",
"EMS_STATUS_9": "Battery training active",
"END_HOUR": "End hour",
"END_MINUTE": "End minute",
"ENERGY_ALL": "Energy all",
"ENERGY_L1": "Energy at L1",
"ENERGY_L2": "Energy at L2",
"ENERGY_L3": "Energy at L3",
"ENERGY_SOLAR": "Energy solar",
"EOD_VOLTAGE": "End of discharge voltage",
"EP": "Emergency power",
"EPTEST_NEXT_TESTSTART": "Emergency power next test-start",
"EPTEST_RUNNING": "Emergency power test running",
"EPTEST_START_COUNTER": "Emergency power test start counter",
"ERROR_CODE": "Error code",
"ERROR_MESSAGE": "Error message",
"ERROR_SOURCE": "Error source",
"ERROR_TIMESTAMP": "Error timestamp",
"ERROR_TYPE": "Error type",
"EXTERN_DATA": "External data",
"EXTERN_DATA_ALG": "External data alg",
"EXTERN_DATA_ALL": "External data all",
"EXTERN_DATA_NET": "External data net",
"EXTERN_DATA_SUN": "External data sun",
"EXT_SRC_AVAILABLE": "External source available",
"E_MAIL": "E-mail",
"FCC": "Full charge capacity",
"FIRMWARE_VERSION": "Firmware version",
"FLASH_VERSION": "Flash version",
"FON": "Phone number",
"FPGA_FIRMWARE": "FPGA Firmware",
"FREQUENCY_OVER": "Frequency over",
"FREQUENCY_UNDER": "Frequency under",
"FS_AVAILABLE": "File system memory available",
"FS_SIZE": "File system memory size",
"FS_USED": "File system memory used",
"FS_USE_PERCENT": "File system percentage used",
"GATEWAY": "Gateway IP address",
"GENERAL_ERROR": "General error",
"GET_PHASE_ELIMINATION": "Get phase elimination",
"GRAPH_INDEX": "Relative position in graph",
"GRID_POWER_IN": "Energy to grid",
"GRID_POWER_OUT": "Energy from grid",
"GUI_TARGET": "GUI target",
"GridPower": "Grid Power",
"HISTORY_DATA_DAY": "Data of one day",
"HISTORY_DATA_MONTH": "Data of one month",
"HISTORY_DATA_WEEK": "Data of one week",
"HISTORY_DATA_YEAR": "Data of one year",
"HW_VERSION": "Hardware version",
"IDLE_PERIOD_ACTIVE": "Idle period active",
"IDLE_PERIOD_DAY": "Idle period day",
"IDLE_PERIOD_HOUR": "Idle period hour",
"IDLE_PERIOD_MINUTE": "Idle period minute",
"IDLE_PERIOD_TYPE": "Idle period type",
"INFO": "Information",
"INODES": "I-nodes total",
"INODES_AVAILABLE": "I-nodes available",
"INODES_USED": "I-nodes used",
"INODES_USE_PERCENT": "I-nodes percentage used",
"INSTALLED_PEAK_POWER": "Installed peak power",
"IP_ADDRESS": "IP address",
"IS_GRID_CONNECTED": "Island state grid connected",
"IS_INVALID_STATE": "Island state invalid state",
"IS_ISLAND_GRID": "Island state island grid",
"IS_POSSIBLE": "Island state possible",
"IS_READY_FOR_SWITCH": "Island state ready for switch",
"IS_SYSTEM_REBOOTING": "Is system rebooting",
"I_BAT": "Current from battery",
"I_DCL": "Current to inverter",
"Information": "Information",
"LAST_ERROR": "Last error",
"MAC_ADDRESS": "MAC address",
"MANUAL_CHARGE_ACTIVE": "Manual charge active",
"MANUAL_CHARGE_ENERGY": "Manual charging energy",
"MANUAL_CHARGE_ENERGY_COUNTER": "Manual charge energy counter",
"MANUAL_CHARGE_LASTSTART": "Manual charge last start",
"MANUAL_CHARGE_START_COUNTER": "Manual charge start counter",
"MAX_BAT_VOLTAGE": "Maximum battery voltage",
"MAX_CHARGE_CURRENT": "Maximum charge current",
"MAX_CHARGE_POWER": "Maximum charge power",
"MAX_DCB_CELL_TEMPERATURE": "Maximum DCB cell temperature",
"MAX_DISCHARGE_CURRENT": "Maximum discharge power",
"MAX_DISCHARGE_POWER": "Maximum discharge power (absolute)",
"MAX_TEMPERATURE": "Maximum temperature",
"MIN_DCB_CELL_TEMPERATURE": "Minimum DCB cell temperature",
"MIN_TEMPERATURE": "Minimum temperature",
"MODE": "Mode (received)",
"MODULE": "Module",
"MODULE_VOLTAGE": "Module voltage",
"NAME": "Name",
"ON_GRID": "On grid",
"OVERRIDE_AVAILABLE_POWER": "Override available power",
"PARAM_1": "Parameter 1",
"PARAM_2": "Parameter 2",
"PARAM_EP_RESERVE": "Emergency energy reserve, target percentage",
"PARAM_EP_RESERVE_ENERGY": "Emergency energy reserve, target energy",
"PARAM_EP_RESERVE_MAX_ENERGY": "Emergency energy reserve, maximum energy",
"PARAM_LAST_SOC": "Last SOC",
"PARAM_NO_REMAINING_RETRY": "No remaining retry",
"PARAM_TIME_LAST_EMPTY": "Latest battery empty timestamp",
"PARAM_TIME_LAST_FULL": "Latest battery full timestamp",
"PARAM_TIME_TO_RETRY": "Time to retry",
"PERIOD_ACTIVE": "Idle period is enabled",
"PERIOD_DESCRIPTION": "Idle period description",
"PERIOD_START": "Idle period start time of day",
"PERIOD_STOP": "Idle period end time of day",
"PERIOD_WEEKDAYS": "Weekdays where idle period is assigned",
"PM": "Power meter",
"PM_0_POWER": "PM0 energy",
"PM_1_POWER": "PM1 energy",
"PM_ACTIVE_PHASES": "PM active phases",
"PM_DEVICE_ID": "PM device id",
"PM_DEVICE_STATE": "PM device state",
"PM_DEVICE_STATE_CONNECTED": "PM device state connected",
"PM_DEVICE_STATE_IN_SERVICE": "PM device state in service",
"PM_DEVICE_STATE_WORKING": "PM device state working",
"PM_ENERGY_L1": "PM energy L1",
"PM_ENERGY_L2": "PM energy L2",
"PM_ENERGY_L3": "PM energy L3",
"PM_ERROR_CODE": "PM error code",
"PM_FIRMWARE_VERSION": "PM firmware version",
"PM_MAX_PHASE_POWER": "PM max. phase power",
"PM_MODE": "PM mode",
"PM_POWER_L1": "PM Power L1",
"PM_POWER_L2": "PM Power L2",
"PM_POWER_L3": "PM Power L3",
"POSTCODE": "ZIP code",
"POWERSAVE_ENABLED": "Powersave mode enabled",
"POWER_ADD": "Power ADD",
"POWER_BAT": "Power to battery",
"POWER_GRID": "Power from grid",
"POWER_HOME": "Power to home",
"POWER_L1": "Power at L1",
"POWER_L2": "Power at L2",
"POWER_L3": "Power at L3",
"POWER_LIMITS_USED": "Power limits used",
"POWER_MODE": "Power mode",
"POWER_PV": "Power from PV",
"POWER_WB_ALL": "Power to wallbox total",
"POWER_WB_SOLAR": "Power to wallbox from PV",
"PRODUCTION_DATE": "Production date",
"PVI": "Photovoltaic inverter",
"PVI_RELEASE": "PVI Release",
"P_BAT": "Power from battery",
"P_DCL": "Power to inverter",
"PowerLimitation": "Limitation of the charging power",
"PrechargePercent": "Precharge Percent",
"RC": "Remaining capacity",
"READY_FOR_SHUTDOWN": "Ready for shutdown",
"RELEASE": "Release",
"REMAINING_BAT_CHARGE_POWER": "Remaining battery charge power",
"REMAINING_BAT_DISCHARGE_POWER": "Remaining battery discharge power",
"RESTART_APPLICATION": "Restart application",
"RETURN_CODE": "Return code",
"ROLE": "Role",
"RSCP": "Remote Storage Control Protocol",
"RSOC": "State of charge",
"RSOC_REAL": "Real state of charge",
"SELF_CONSUMPTION": "Self consumption",
"SERIAL_NUMBER": "Serial number",
"SET_POWER": "Set power (received)",
"SET_POWER_MODE": "Power mode (sent)",
"SET_POWER_VALUE": "Set power (sent)",
"SOC": "State of charge",
"SPECIFIED_CAPACITY": "Specified capacity",
"SPECIFIED_CHARGE_POWER": "Specified charge power",
"SPECIFIED_DISCHARGE_POWER": "Specified discharge power",
"SPECIFIED_MAX_DCB_COUNT": "Specified maximum DCB count",
"START_EMERGENCY_POWER_TEST": "Start emergency power test",
"START_HOUR": "Start hour",
"START_MINUTE": "Start minute",
"STATE": "State",
"STATE_AS_STRING": "State string",
"STATUS": "Status",
"STATUS_CODE": "Status code",
"STREET": "Street",
"STREET_NO": "Street number",
"SUBNET_MASK": "Subnet mask",
"SUBSTATE": "Substate",
"SUBSTATE_AS_STRING": "Substate string",
"SURNAME": "Surname",
"SW_RELEASE": "Software release",
"SYS": "System",
"SYSTEM_MODE": "System mode",
"SYSTEM_REBOOT": "System reboot",
"SunMode": "Sun mode or mixed mode",
"SunPower": "Solar power",
"TEMPERATURE": "Temperature",
"TEMPERATURE_COUNT": "Number of temperature values",
"TERMINAL_VOLTAGE": "Terminal voltage",
"TIME": "Time",
"TIMESTAMP": "Timestamp",
"TIME_INTERVAL": "Time interval",
"TIME_SPAN": "Data span",
"TIME_START": "Start time",
"TIME_ZONE": "Time zone",
"TOTAL_DISCHARGE_TIME": "Total discharge time",
"TOTAL_USE_TIME": "Total use time",
"TRAINING_MODE": "Training mode",
"TYPE": "Type",
"ToggleChargingType2": "Switching the Type 2 charging process",
"TogglePhases": "Toggle phases",
"TotalPower": "Total Power",
"Type2Locked": "Type 2 Plug locked",
"USABLE_CAPACITY": "Usable capacity",
"USABLE_REMAINING_CAPACITY": "Usable remaining capacity",
"USED_CHARGE_LIMIT": "Used charge limit",
"USED_DISCHARGE_LIMIT": "Used discharge limit",
"UTC_TIME": "Time UTC",
"U_BAT": "Voltage from battery",
"U_DCL": "Voltage to inverter",
"VALUE": "Value",
"VERSION": "Version",
"VERSION_MAIN": "Main version",
"VERSION_PIC": "PIC version",
"VOLTAGE_L1": "Voltage at L1",
"VOLTAGE_L2": "Voltage at L2",
"VOLTAGE_L3": "Voltage at L3",
"VOLTAGE_MONITORING_SLOPE_DOWN": "Voltage monitoring slope down",
"VOLTAGE_MONITORING_SLOPE_UP": "Voltage monitoring slope up",
"VOLTAGE_MONITORING_THRESHOLD_BOTTOM": "Voltage monitoring threshold bottom",
"VOLTAGE_MONITORING_THRESHOLD_TOP": "Voltage monitoring threshold top",
"WB": "Wallbox",
"WB_DISCHARGE_BAT_UNTIL": "Battery discharge limit through the wallbox",
"WB_ENFORCE_POWER_ASSIGNMENT": "Prevent battery discharge through wall box in mixing mode",
"WEATHER_REGULATED_CHARGE_ENABLED": "Weather regulated charge enabled",
"column_interval": "Polling interval",
"column_tag": "Request tag name",
"e3dc-rscp adapter settings": "Adapter settings for e3dc-rscp",
"e3dc_ip": "E3/DC IP address",
"e3dc_port": "E3/DC port",
"hybridModeSupported": "Hybrid mode supported",
"installedBatteryCapacity": "Installed battery capacity",
"lazy_setstate": "Lazy setState() calling",
"maxAcPower": "Maximum AC power",
"maxBatChargePower": "Maximum batttery charge power",
"maxBatDischargPower": "Maximum battery discharge power",
"maxChargePower": "Maximum charge power",
"maxDischargePower": "Maximum discharge power",
"maxFbcChargePower": "Maximum FCB charge power",
"maxFbcDischargePower": "Maximum FCB discharge power",
"maxPvPower": "Maximum PV power",
"maxStartChargePower": "Maximum start charge power",
"maxStartDischargePower": "Maximum start discharge power",
"maxindex_bat": "BAT (batteries)",
"maxindex_dcdc": "DCDC (DC-DC converter)",
"maxindex_pm": "PM (power meters)",
"maxindex_pvi": "PVI (power inverters)",
"maxindex_wb": "WB (wallbox)",
"minStartChargePower": "Minimum start charge power",
"minStartDischargePower": "Minimum start discharge power",
"options": "Options",
"periods_v1": "Idle periods version 1",
"periods_v1_tooltip": "Idle periods version 1, as shown in the old E3/DC portal. Does not support more than one period on the same day.",
"periods_v1v2": "V1 and V2 interfere - not recommended!",
"periods_v2": "Idle periods version 2",
"periods_v2_tooltip": "In 2024, idle periods version 2 were introduced, as shown in the new E3/DC portal. Multiple periods on the same day are possible.",
"polling_interval_long": "Polling interval L = long [hrs]",
"polling_interval_medium": "Polling interval M = medium [min]",
"polling_interval_short": "Polling interval S = short [sec]",
"polling_intervals": "Polling intervals",
"portal_password": "E3/DC portal password",
"portal_user": "E3/DC portal user",
"query_bat": "BAT (battery)",
"query_db": "DB (database)",
"query_dcdc": "DCDC (DC-DC converter)",
"query_ems": "EMS (energy management system)",
"query_ep": "EP (emergency power)",
"query_info": "INFO (information)",
"query_pm": "PM (power meter)",
"query_pvi": "PVI (photovoltaic inverter)",
"query_sys": "SYS (system)",
"query_wb": "WB (wallbox)",
"recommendedMinChargeLimit": "Recommended minimum charge limit",
"recommendedMinDischargeLimit": "Recommended minimum discharge limit",
"rscp_password": "E3/DC RSCP password",
"send_tuple_delay": "Tuple sending delay [sec]",
"setidleperiod_delay": "Set idle period delay [sec]",
"setpower_interval": "SET_POWER resend interval [sec]",
"startChargeDefault": "Start charge default",
"startDischargeDefault": "Start discharge default",
"title_connection": "Setup E3/DC connection",
"title_intervals": "Set time intervals for sending",
"title_maxindex": "Max. index for initialisation of components - first index is 0 (zero)",
"title_misc": "Miscellaneous",
"title_namespaces": "Select E3/DC namespaces to query data for",
"title_polling_intervals": "Set data polling intervals",
"title_polling_intervals_table": "Polling interval per RSCP tag"
}