industry-tools

export declare const ERC20_FLATTENED_CONTRACT = "// Sources flattened with hardhat v2.22.15 https://hardhat.org\n\n// SPDX-License-Identifier: MIT\n\n// File @openzeppelin/contracts/utils/Context.sol@v5.1.0\n\n// Original license: SPDX_License_Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n\n function _contextSuffixLength() internal view virtual returns (uint256) {\n return 0;\n }\n}\n\n\n// File @openzeppelin/contracts/access/Ownable.sol@v5.1.0\n\n// Original license: SPDX_License_Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n /**\n * @dev The caller account is not authorized to perform an operation.\n */\n error OwnableUnauthorizedAccount(address account);\n\n /**\n * @dev The owner is not a valid owner account. (eg. `address(0)`)\n */\n error OwnableInvalidOwner(address owner);\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n */\n constructor(address initialOwner) {\n if (initialOwner == address(0)) {\n revert OwnableInvalidOwner(address(0));\n }\n _transferOwnership(initialOwner);\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n _checkOwner();\n _;\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if the sender is not the owner.\n */\n function _checkOwner() internal view virtual {\n if (owner() != _msgSender()) {\n revert OwnableUnauthorizedAccount(_msgSender());\n }\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby disabling any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n if (newOwner == address(0)) {\n revert OwnableInvalidOwner(address(0));\n }\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n\n\n// File @openzeppelin/contracts/interfaces/draft-IERC6093.sol@v5.1.0\n\n// Original license: SPDX_License_Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC6093.sol)\npragma solidity ^0.8.20;\n\n/**\n * @dev Standard ERC-20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.\n */\ninterface IERC20Errors {\n /**\n * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param balance Current balance for the interacting account.\n * @param needed Minimum amount required to perform a transfer.\n */\n error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC20InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC20InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `spender`'s `allowance`. Used in transfers.\n * @param spender Address that may be allowed to operate on tokens without being their owner.\n * @param allowance Amount of tokens a `spender` is allowed to operate with.\n * @param needed Minimum amount required to perform a transfer.\n */\n error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC20InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n * @param spender Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC-721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.\n */\ninterface IERC721Errors {\n /**\n * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.\n * Used in balance queries.\n * @param owner Address of the current owner of a token.\n */\n error ERC721InvalidOwner(address owner);\n\n /**\n * @dev Indicates a `tokenId` whose `owner` is the zero address.\n * @param tokenId Identifier number of a token.\n */\n error ERC721NonexistentToken(uint256 tokenId);\n\n /**\n * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param tokenId Identifier number of a token.\n * @param owner Address of the current owner of a token.\n */\n error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC721InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC721InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `operator`'s approval. Used in transfers.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n * @param tokenId Identifier number of a token.\n */\n error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC721InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC-1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.\n */\ninterface IERC1155Errors {\n /**\n * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param balance Current balance for the interacting account.\n * @param needed Minimum amount required to perform a transfer.\n * @param tokenId Identifier number of a token.\n */\n error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC1155InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC1155InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `operator`'s approval. Used in transfers.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n * @param owner Address of the current owner of a token.\n */\n error ERC1155MissingApprovalForAll(address operator, address owner);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC1155InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC1155InvalidOperator(address operator);\n\n /**\n * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n * Used in batch transfers.\n * @param idsLength Length of the array of token identifiers\n * @param valuesLength Length of the array of token amounts\n */\n error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n\n// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v5.1.0\n\n// Original license: SPDX_License_Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n\n /**\n * @dev Returns the value of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the value of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 value) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n * caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 value) external returns (bool);\n\n /**\n * @dev Moves a `value` amount of tokens from `from` to `to` using the\n * allowance mechanism. `value` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n\n\n// File @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol@v5.1.0\n\n// Original license: SPDX_License_Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface for the optional metadata functions from the ERC-20 standard.\n */\ninterface IERC20Metadata is IERC20 {\n /**\n * @dev Returns the name of the token.\n */\n function name() external view returns (string memory);\n\n /**\n * @dev Returns the symbol of the token.\n */\n function symbol() external view returns (string memory);\n\n /**\n * @dev Returns the decimals places of the token.\n */\n function decimals() external view returns (uint8);\n}\n\n\n// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v5.1.0\n\n// Original license: SPDX_License_Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.20;\n\n\n\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * The default value of {decimals} is 18. To change this, you should override\n * this function so it returns a different value.\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC-20\n * applications.\n */\nabstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {\n mapping(address account => uint256) private _balances;\n\n mapping(address account => mapping(address spender => uint256)) private _allowances;\n\n uint256 private _totalSupply;\n\n string private _name;\n string private _symbol;\n\n /**\n * @dev Sets the values for {name} and {symbol}.\n *\n * All two of these values are immutable: they can only be set once during\n * construction.\n */\n constructor(string memory name_, string memory symbol_) {\n _name = name_;\n _symbol = symbol_;\n }\n\n /**\n * @dev Returns the name of the token.\n */\n function name() public view virtual returns (string memory) {\n return _name;\n }\n\n /**\n * @dev Returns the symbol of the token, usually a shorter version of the\n * name.\n */\n function symbol() public view virtual returns (string memory) {\n return _symbol;\n }\n\n /**\n * @dev Returns the number of decimals used to get its user representation.\n * For example, if `decimals` equals `2`, a balance of `505` tokens should\n * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n *\n * Tokens usually opt for a value of 18, imitating the relationship between\n * Ether and Wei. This is the default value returned by this function, unless\n * it's overridden.\n *\n * NOTE: This information is only used for _display_ purposes: it in\n * no way affects any of the arithmetic of the contract, including\n * {IERC20-balanceOf} and {IERC20-transfer}.\n */\n function decimals() public view virtual returns (uint8) {\n return 18;\n }\n\n /**\n * @dev See {IERC20-totalSupply}.\n */\n function totalSupply() public view virtual returns (uint256) {\n return _totalSupply;\n }\n\n /**\n * @dev See {IERC20-balanceOf}.\n */\n function balanceOf(address account) public view virtual returns (uint256) {\n return _balances[account];\n }\n\n /**\n * @dev See {IERC20-transfer}.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - the caller must have a balance of at least `value`.\n */\n function transfer(address to, uint256 value) public virtual returns (bool) {\n address owner = _msgSender();\n _transfer(owner, to, value);\n return true;\n }\n\n /**\n * @dev See {IERC20-allowance}.\n */\n function allowance(address owner, address spender) public view virtual returns (uint256) {\n return _allowances[owner][spender];\n }\n\n /**\n * @dev See {IERC20-approve}.\n *\n * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on\n * `transferFrom`. This is semantically equivalent to an infinite approval.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n */\n function approve(address spender, uint256 value) public virtual returns (bool) {\n address owner = _msgSender();\n _approve(owner, spender, value);\n return true;\n }\n\n /**\n * @dev See {IERC20-transferFrom}.\n *\n * Skips emitting an {Approval} event indicating an allowance update. This is not\n * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].\n *\n * NOTE: Does not update the allowance if the current allowance\n * is the maximum `uint256`.\n *\n * Requirements:\n *\n * - `from` and `to` cannot be the zero address.\n * - `from` must have a balance of at least `value`.\n * - the caller must have allowance for ``from``'s tokens of at least\n * `value`.\n */\n function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {\n address spender = _msgSender();\n _spendAllowance(from, spender, value);\n _transfer(from, to, value);\n return true;\n }\n\n /**\n * @dev Moves a `value` amount of tokens from `from` to `to`.\n *\n * This internal function is equivalent to {transfer}, and can be used to\n * e.g. implement automatic token fees, slashing mechanisms, etc.\n *\n * Emits a {Transfer} event.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead.\n */\n function _transfer(address from, address to, uint256 value) internal {\n if (from == address(0)) {\n revert ERC20InvalidSender(address(0));\n }\n if (to == address(0)) {\n revert ERC20InvalidReceiver(address(0));\n }\n _update(from, to, value);\n }\n\n /**\n * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`\n * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding\n * this function.\n *\n * Emits a {Transfer} event.\n */\n function _update(address from, address to, uint256 value) internal virtual {\n if (from == address(0)) {\n // Overflow check required: The rest of the code assumes that totalSupply never overflows\n _totalSupply += value;\n } else {\n uint256 fromBalance = _balances[from];\n if (fromBalance < value) {\n revert ERC20InsufficientBalance(from, fromBalance, value);\n }\n unchecked {\n // Overflow not possible: value <= fromBalance <= totalSupply.\n _balances[from] = fromBalance - value;\n }\n }\n\n if (to == address(0)) {\n unchecked {\n // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.\n _totalSupply -= value;\n }\n } else {\n unchecked {\n // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.\n _balances[to] += value;\n }\n }\n\n emit Transfer(from, to, value);\n }\n\n /**\n * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).\n * Relies on the `_update` mechanism\n *\n * Emits a {Transfer} event with `from` set to the zero address.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead.\n */\n function _mint(address account, uint256 value) internal {\n if (account == address(0)) {\n revert ERC20InvalidReceiver(address(0));\n }\n _update(address(0), account, value);\n }\n\n /**\n * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.\n * Relies on the `_update` mechanism.\n *\n * Emits a {Transfer} event with `to` set to the zero address.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead\n */\n function _burn(address account, uint256 value) internal {\n if (account == address(0)) {\n revert ERC20InvalidSender(address(0));\n }\n _update(account, address(0), value);\n }\n\n /**\n * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.\n *\n * This internal function is equivalent to `approve`, and can be used to\n * e.g. set automatic allowances for certain subsystems, etc.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `owner` cannot be the zero address.\n * - `spender` cannot be the zero address.\n *\n * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n */\n function _approve(address owner, address spender, uint256 value) internal {\n _approve(owner, spender, value, true);\n }\n\n /**\n * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.\n *\n * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by\n * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any\n * `Approval` event during `transferFrom` operations.\n *\n * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to\n * true using the following override:\n *\n * ```solidity\n * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {\n * super._approve(owner, spender, value, true);\n * }\n * ```\n *\n * Requirements are the same as {_approve}.\n */\n function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {\n if (owner == address(0)) {\n revert ERC20InvalidApprover(address(0));\n }\n if (spender == address(0)) {\n revert ERC20InvalidSpender(address(0));\n }\n _allowances[owner][spender] = value;\n if (emitEvent) {\n emit Approval(owner, spender, value);\n }\n }\n\n /**\n * @dev Updates `owner` s allowance for `spender` based on spent `value`.\n *\n * Does not update the allowance value in case of infinite allowance.\n * Revert if not enough allowance is available.\n *\n * Does not emit an {Approval} event.\n */\n function _spendAllowance(address owner, address spender, uint256 value) internal virtual {\n uint256 currentAllowance = allowance(owner, spender);\n if (currentAllowance != type(uint256).max) {\n if (currentAllowance < value) {\n revert ERC20InsufficientAllowance(spender, currentAllowance, value);\n }\n unchecked {\n _approve(owner, spender, currentAllowance - value, false);\n }\n }\n }\n}\n\n\n// File contracts/Token.sol\n\n// Original license: SPDX_License_Identifier: MIT\npragma solidity ^0.8.24;\n\n\ncontract Token is ERC20, Ownable(msg.sender) {\n constructor(\n string memory name,\n string memory symbol,\n uint256 initialSupply\n ) ERC20(name, symbol) {\n _mint(msg.sender, initialSupply);\n }\n}"; export declare const ERC20_CONTRACT_ABI: readonly [{ readonly inputs: readonly [{ readonly internalType: "string"; readonly name: "name"; readonly type: "string"; }, { readonly internalType: "string"; readonly name: "symbol"; readonly type: "string"; }, { readonly internalType: "uint256"; readonly name: "initialSupply"; readonly type: "uint256"; }]; readonly stateMutability: "nonpayable"; readonly type: "constructor"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "spender"; readonly type: "address"; }, { readonly internalType: "uint256"; readonly name: "allowance"; readonly type: "uint256"; }, { readonly internalType: "uint256"; readonly name: "needed"; readonly type: "uint256"; }]; readonly name: "ERC20InsufficientAllowance"; readonly type: "error"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "sender"; readonly type: "address"; }, { readonly internalType: "uint256"; readonly name: "balance"; readonly type: "uint256"; }, { readonly internalType: "uint256"; readonly name: "needed"; readonly type: "uint256"; }]; readonly name: "ERC20InsufficientBalance"; readonly type: "error"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "approver"; readonly type: "address"; }]; readonly name: "ERC20InvalidApprover"; readonly type: "error"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "receiver"; readonly type: "address"; }]; readonly name: "ERC20InvalidReceiver"; readonly type: "error"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "sender"; readonly type: "address"; }]; readonly name: "ERC20InvalidSender"; readonly type: "error"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "spender"; readonly type: "address"; }]; readonly name: "ERC20InvalidSpender"; readonly type: "error"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "owner"; readonly type: "address"; }]; readonly name: "OwnableInvalidOwner"; readonly type: "error"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "account"; readonly type: "address"; }]; readonly name: "OwnableUnauthorizedAccount"; readonly type: "error"; }, { readonly anonymous: false; readonly inputs: readonly [{ readonly indexed: true; readonly internalType: "address"; readonly name: "owner"; readonly type: "address"; }, { readonly indexed: true; readonly internalType: "address"; readonly name: "spender"; readonly type: "address"; }, { readonly indexed: false; readonly internalType: "uint256"; readonly name: "value"; readonly type: "uint256"; }]; readonly name: "Approval"; readonly type: "event"; }, { readonly anonymous: false; readonly inputs: readonly [{ readonly indexed: true; readonly internalType: "address"; readonly name: "previousOwner"; readonly type: "address"; }, { readonly indexed: true; readonly internalType: "address"; readonly name: "newOwner"; readonly type: "address"; }]; readonly name: "OwnershipTransferred"; readonly type: "event"; }, { readonly anonymous: false; readonly inputs: readonly [{ readonly indexed: true; readonly internalType: "address"; readonly name: "from"; readonly type: "address"; }, { readonly indexed: true; readonly internalType: "address"; readonly name: "to"; readonly type: "address"; }, { readonly indexed: false; readonly internalType: "uint256"; readonly name: "value"; readonly type: "uint256"; }]; readonly name: "Transfer"; readonly type: "event"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "owner"; readonly type: "address"; }, { readonly internalType: "address"; readonly name: "spender"; readonly type: "address"; }]; readonly name: "allowance"; readonly outputs: readonly [{ readonly internalType: "uint256"; readonly name: ""; readonly type: "uint256"; }]; readonly stateMutability: "view"; readonly type: "function"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "spender"; readonly type: "address"; }, { readonly internalType: "uint256"; readonly name: "value"; readonly type: "uint256"; }]; readonly name: "approve"; readonly outputs: readonly [{ readonly internalType: "bool"; readonly name: ""; readonly type: "bool"; }]; readonly stateMutability: "nonpayable"; readonly type: "function"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "account"; readonly type: "address"; }]; readonly name: "balanceOf"; readonly outputs: readonly [{ readonly internalType: "uint256"; readonly name: ""; readonly type: "uint256"; }]; readonly stateMutability: "view"; readonly type: "function"; }, { readonly inputs: readonly []; readonly name: "decimals"; readonly outputs: readonly [{ readonly internalType: "uint8"; readonly name: ""; readonly type: "uint8"; }]; readonly stateMutability: "view"; readonly type: "function"; }, { readonly inputs: readonly []; readonly name: "name"; readonly outputs: readonly [{ readonly internalType: "string"; readonly name: ""; readonly type: "string"; }]; readonly stateMutability: "view"; readonly type: "function"; }, { readonly inputs: readonly []; readonly name: "owner"; readonly outputs: readonly [{ readonly internalType: "address"; readonly name: ""; readonly type: "address"; }]; readonly stateMutability: "view"; readonly type: "function"; }, { readonly inputs: readonly []; readonly name: "renounceOwnership"; readonly outputs: readonly []; readonly stateMutability: "nonpayable"; readonly type: "function"; }, { readonly inputs: readonly []; readonly name: "symbol"; readonly outputs: readonly [{ readonly internalType: "string"; readonly name: ""; readonly type: "string"; }]; readonly stateMutability: "view"; readonly type: "function"; }, { readonly inputs: readonly []; readonly name: "totalSupply"; readonly outputs: readonly [{ readonly internalType: "uint256"; readonly name: ""; readonly type: "uint256"; }]; readonly stateMutability: "view"; readonly type: "function"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "to"; readonly type: "address"; }, { readonly internalType: "uint256"; readonly name: "value"; readonly type: "uint256"; }]; readonly name: "transfer"; readonly outputs: readonly [{ readonly internalType: "bool"; readonly name: ""; readonly type: "bool"; }]; readonly stateMutability: "nonpayable"; readonly type: "function"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "from"; readonly type: "address"; }, { readonly internalType: "address"; readonly name: "to"; readonly type: "address"; }, { readonly internalType: "uint256"; readonly name: "value"; readonly type: "uint256"; }]; readonly name: "transferFrom"; readonly outputs: readonly [{ readonly internalType: "bool"; readonly name: ""; readonly type: "bool"; }]; readonly stateMutability: "nonpayable"; readonly type: "function"; }, { readonly inputs: readonly [{ readonly internalType: "address"; readonly name: "newOwner"; readonly type: "address"; }]; readonly name: "transferOwnership"; readonly outputs: readonly []; readonly stateMutability: "nonpayable"; readonly type: "function"; }]; export declare const ERC20_CONTRACT_BYTECODE = "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";