homebridge-smartsystem
Version:
SmartServer (Proxy TCP sockets to the cloud, Smappee MQTT, Duotecno IP Nodes, Homekit interface)
180 lines • 6.12 kB
JavaScript
;
var __awaiter = (this && this.__awaiter) || function (thisArg, _arguments, P, generator) {
function adopt(value) { return value instanceof P ? value : new P(function (resolve) { resolve(value); }); }
return new (P || (P = Promise))(function (resolve, reject) {
function fulfilled(value) { try { step(generator.next(value)); } catch (e) { reject(e); } }
function rejected(value) { try { step(generator["throw"](value)); } catch (e) { reject(e); } }
function step(result) { result.done ? resolve(result.value) : adopt(result.value).then(fulfilled, rejected); }
step((generator = generator.apply(thisArg, _arguments || [])).next());
});
};
Object.defineProperty(exports, "__esModule", { value: true });
exports.stop = exports.up = exports.down = void 0;
const sgpio = require("rpi-gpio");
const logger_1 = require("../duotecno/logger");
const gpio = sgpio.promise;
const s3v3 = 1; // pin 1
const sGnd = 3; // pin 3
const sUp = 5; // pin 29
const sDown = 6; // pin 31
const sSelect = 16; // pin 36
const sStop = 26; // pin 37 -- make 0 not to use "stop"
const sScreen1 = 25; // pin 22
const sScreen2 = 24; // pin 18
const sScreen3 = 23; // pin 16
const sScreen4 = 22; // pin 15
const kWaitPush = 150;
const kWaitStable = 200;
let init;
let busy;
function mS(nr) {
return __awaiter(this, void 0, void 0, function* () {
return new Promise(resolve => setTimeout(resolve, nr));
});
}
function setup() {
return __awaiter(this, void 0, void 0, function* () {
logger_1.logSettings["somfy"] = logger_1.LogLevel.debug;
// use real names (MODE_BCM) or pin numbers(MODE_RPI)
sgpio.setMode(sgpio.MODE_BCM);
// set for output
yield gpio.setup(sSelect, gpio.DIR_OUT);
yield gpio.write(sSelect, true);
yield gpio.setup(sUp, gpio.DIR_OUT);
yield gpio.write(sUp, true);
yield gpio.setup(sDown, gpio.DIR_OUT);
yield gpio.write(sDown, true);
if (sStop) {
yield gpio.setup(sStop, gpio.DIR_OUT);
yield gpio.write(sStop, true);
}
// set for input active low
yield gpio.setup(sScreen1, gpio.DIR_IN);
yield gpio.setup(sScreen2, gpio.DIR_IN);
yield gpio.setup(sScreen3, gpio.DIR_IN);
yield gpio.setup(sScreen4, gpio.DIR_IN);
});
}
function toggle(pin) {
return __awaiter(this, void 0, void 0, function* () {
yield gpio.write(pin, false);
yield mS(kWaitPush);
yield gpio.write(pin, true);
yield mS(kWaitStable);
});
}
function selected(screen) {
return __awaiter(this, void 0, void 0, function* () {
const screens = [false,
!(yield gpio.read(sScreen1)),
!(yield gpio.read(sScreen2)),
!(yield gpio.read(sScreen3)),
!(yield gpio.read(sScreen4))];
screens[0] = screens[1] && screens[2] && screens[3] && screens[4];
if (screens[0]) {
screens[1] = screens[2] = screens[3] = screens[4] = false;
}
(0, logger_1.debug)("somfy", "selected screen: " + screens[0] + " " + screens[1] + " " + screens[2] + " " + screens[3] + " " + screens[4] + " <- " + screen + "=" + screens[screen]);
return screens[screen];
});
}
function select(screen) {
return __awaiter(this, void 0, void 0, function* () {
(0, logger_1.debug)("somfy", "try to select screen " + screen);
let i = 0;
do {
yield toggle(sSelect);
if (yield selected(screen))
return true;
i++;
} while (i < 5);
// give up after 5 tries
(0, logger_1.debug)("somfy", "Error: couldn't select screen " + screen);
return false;
});
}
function waitBusy() {
return __awaiter(this, void 0, void 0, function* () {
// wait the average selection time
const kWaitingTime = (kWaitStable + kWaitPush) * 2.5;
let nr = 0;
while (busy) {
nr++;
(0, logger_1.debug)("somfy", "waiting for busy flag - " + Math.round(nr * kWaitingTime) + "mSec");
yield mS(kWaitingTime);
}
busy = true;
});
}
function down(screen) {
return __awaiter(this, void 0, void 0, function* () {
(0, logger_1.debug)("somfy", "down " + screen + ((init) ? "" : " - test mode"));
if (!init)
return true;
yield waitBusy();
if (yield select(screen)) {
yield toggle(sDown);
busy = false;
return true;
}
busy = false;
return false;
});
}
exports.down = down;
function up(screen) {
return __awaiter(this, void 0, void 0, function* () {
(0, logger_1.debug)("somfy", "up " + screen + ((init) ? "" : " - test mode"));
if (!init)
return true;
yield waitBusy();
if (yield select(screen)) {
yield toggle(sUp);
busy = false;
return true;
}
busy = false;
return false;
});
}
exports.up = up;
function stop(screen) {
return __awaiter(this, void 0, void 0, function* () {
(0, logger_1.debug)("somfy", "stop " + screen + ((init) ? "" : " - test mode"));
if (!init)
return true;
yield waitBusy();
if (sStop) {
if (yield select(screen)) {
yield toggle(sStop);
busy = false;
return true;
}
busy = false;
return false;
}
else {
busy = false;
return true;
}
});
}
exports.stop = stop;
// async function testing() {
// await setup();
// await down(3);
// await up(2);
// }
busy = true;
setup().then(() => {
(0, logger_1.debug)("somfy", "gpio package initialized");
init = true;
busy = false;
}).catch((e) => {
(0, logger_1.debug)("somfy", "gpio package not initialized");
if ((e.code != "EACCES") && (e.code != "ENOENT"))
(0, logger_1.debug)("somfy", e);
init = false;
busy = false;
});
//# sourceMappingURL=somfy.js.map