homebridge-melcloud-control
Version:
Homebridge plugin to control Mitsubishi Air Conditioner, Heat Pump and Energy Recovery Ventilation.
409 lines (379 loc) • 29.2 kB
Markdown
<p align="center">
<a href="https://github.com/grzegorz914/homebridge-melcloud-control"><img src="https://raw.githubusercontent.com/grzegorz914/homebridge-melcloud-control/main/graphics/homebridge-melcloud-control.png" width="540"></a>
</p>
<span align="center">
# Homebridge MELCloud Control
[](https://github.com/homebridge/homebridge/wiki/Verified-Plugins)
[](https://www.npmjs.com/package/homebridge-melcloud-control)
[](https://www.npmjs.com/package/homebridge-melcloud-control)
[](https://www.npmjs.com/package/homebridge-melcloud-control)
[](https://github.com/grzegorz914/homebridge-melcloud-control/pulls)
[](https://github.com/grzegorz914/homebridge-melcloud-control/issues)
Homebridge plugin for Air Conditioner, Heat Pump and Energy Recovery Ventilation Lossnay, manufactured by Mistsubishi and connected to MELCloud.
</span>
## Package Requirements
| Package | Installation | Role | Required |
| --- | --- | --- | --- |
| [Homebridge v2.0](https://github.com/homebridge/homebridge) | [Homebridge Wiki](https://github.com/homebridge/homebridge/wiki) | HomeKit Bridge | Required ab v3.0.0 |
| [Config UI X](https://github.com/homebridge/homebridge-config-ui-x) | [Config UI X Wiki](https://github.com/homebridge/homebridge-config-ui-x/wiki) | Homebridge Web User Interface | Required ab v3.0.0|
| [MELCloud](https://github.com/grzegorz914/homebridge-melcloud-control) | [Plug-In Wiki](https://github.com/grzegorz914/homebridge-melcloud-control/wiki) | Homebridge Plug-In | Required |
### About The Plugin
* All devices are detected automatically.
* Control devices over MELCloud server.
* Support multiple accounts, buildings, floors, areas.
* Support temperature display units `Celsius/Fahrenheit`.
* Support assing inividual operating mode for `Heat/Cool/Auto`.
* Support direct `Presets` control using extra `Buttons`, switch it to `OFF` restore previous device state.
* Support direct `Functions` control using extra `Buttons`, switch it to `OFF` restore previous device state.
* Support detect all device states using extra `Sensors`.
* Support automations, shortcuts and Siri.
* Support external integrations, [RESTFul](https://github.com/grzegorz914/homebridge-melcloud-control?tab=readme-ov-file#restful-integration), [MQTT](https://github.com/grzegorz914/homebridge-melcloud-control?tab=readme-ov-file#mqtt-integration).
* Control devices over local network You need use ESP module and [Tasmota Control](https://github.com/grzegorz914/homebridge-tasmota-control) plugin.
### Control Mode
* Air Conditioner:
* Heater Cooler:
* Power `ON/OFF`.
* Operating mode `AUTO/HEAT/COOL/POWER OFF`.
* Temperature `HEATING/COOLING/AUTO`.
* Fan speed `OFF/1/2/3/4/5/AUTO`.
* Swing mode `AUTO/SWING`.
* Physical lock controls `LOCK/UNLOCK`.
* Temperature display unit `°F/°C`.
* Thermostat:
* Power `ON/OFF`.
* Operating mode `POWER OFF/HEAT/COOL/AUTO`.
* Temperature `HEATING/COOLING/AUTO`.
* Temperature display unit `°F/°C`.
* Assign operating mode for `HEAT/AUTO`
* Buttons:
* For direct device control.
* Power `ON/OFF`.
* Operating mode `HEAT/DRY/COOL/FAN/AUTO`.
* Physical lock controls `LOCK/UNLOCK`.
* Vane H mode `AUTO/1/2/3/4/5/SPLIT/SWING`.
* Vane V mode `AUTO/1/2/3/4/5/SWING`.
* Fan speed mode `AUTO/1/2/3/4/5`.
* Presets `SET/UNSET`.
* Sensors:
* For automation and notifications.
* Power `ON/OFF`.
* Operating mode `HEAT/DRY/COOL/FAN/AUTO`.
* Physical lock controls `LOCK/UNLOCK`.
* Vane H mode `AUTO/1/2/3/4/5/SPLIT/SWING`.
* Vane V mode `AUTO/1/2/3/4/5/SWING`.
* Fan speed mode `AUTO/1/2/3/4/5/`.
* Presets `ACTIV/UNACTIV`.
* Room temperature.
* Outdoor temperature.
* Heat Pump:
* Heater Cooler:
* Heat Pump:
* Power `ON/OFF`.
* Operating mode `HEAT/COOL`.
* Outdoor temperature `GET`.
* Physical lock controls all Zones and Hot Water Tank `LOCK/UNLOCK`.
* Temperature display unit `°F/°C`.
* Zone 1 and 2:
* Operating mode heat `AUTO/HEAT/COOL` - `CURVE/HEAT THERMOSTAT/HEAT FLOW`.
* Operating mode cool `HEAT/COOL` - `COOL THERMOSTAT/COOL FLOW`.
* Temperature `HEATING/COOLING`.
* Physical lock controls `LOCK/UNLOCK`.
* Hot Water Tank:
* Operating mode `AUTO/HEAT` - `AUTO/HEAT NOW`.
* Temperature `SET/GET`.
* Physical lock controls `LOCK/UNLOCK`.
* Thermostat:
* Heat Pump:
* Power `ON/OFF`.
* Operating mode `HEAT/COOL`.
* Outdoor temperature `GET`.
* Temperature display unit `°F/°C`.
* Zone 1 and 2:
* Operating mode heat `HEAT/COOL/AUTO` - `HEAT THERMOSTAT/HEAT FLOW/CURVE`.
* Operating mode cool `HEAT/COOL` - `COOL THERMOSTAT/COOL FLOW`.
* Temperature `HEATING/COOLING`.
* Hot Water Tank:
* Operating mode `HEAT/AUTO` - `HEAT NOW, AUTO`.
* Temperature `SET/GET`.
* Buttons:
* For direct device control.
* Power `ON/OFF`.
* Operating mode `HEAT/COOL/CURVE/HOLIDAY/AUTO HOT WATER/ECO HOT WATER/FORCE HOT WATER`.
* Physical lock controls `LOCK/UNLOCK`.
* Presets `SET/UNSET`.
* Sensors:
* For automation and notifications.
* Power `ON/OFF`.
* Operating mode `HEAT/COOL/CURVE/HOLIDAY/AUTO HOT WATER/ECO HOT WATER/FORCE HOT WATER`.
* Physical lock controls `LOCK/UNLOCK`.
* Presets `ACTIV/UNACTIV`.
* Outdoor temperature.
* Zone 1 temperature.
* Zone 2 temperature.
* Water tank temperature.
* Flow Temperature Zone 1, 2, Hot Water.
* Return Temperature Zone 1, 2, Hot Water.
* Energy Recovery Ventilation Lossnay:
* Heater Cooler:
* Power `ON/OFF`.
* Operating mode `AUTO/HEAT/COOL/POWER OFF` - `AUTO, LOSSNAY, BYPASS, POWER OFF`.
* Fan speed `OFF/1/2/3/4/AUTO`.
* Temperature display unit `°F/°C`.
* Thermostat:
* Power `ON/OFF`.
* Operating mode `POWER OFF/HEAT/COOL/AUTO` - `POWER OFF, LOSSNAY, BYPASS, AUTO`.
* Temperature display unit `°F/°C`.
* Buttons:
* For direct device control.
* Power `ON/OFF`.
* Operating mode `LOSSNAY/BYPASS/AUTO/NIGHT PURGE`.
* Fan speed mode `AUTO/1/2/3/4`.
* Presets `SET/UNSET`.
* Sensors:
* For automation and notifications.
* Power `ON/OFF`.
* Operating mode `LOSSNAY/BYPASS/AUTO/NIGHT PURGE`.
* Fan speed mode `AUTO/1/2/3/4`.
* Presets `ACTIV/UNACTIV`.
* Room temperature.
* Outdoor temperature.
* Supply temperature.
* Core maintenance.
* Filter maintenance.
* CO2 detected and level.
* PM2.5 air quality and level.
### HOME app current device mode display
* In AUTO mode, the tile display current state based on current mode:
* In HEATING mode, th tile display current state as HEATING - orange
* In COOLING mode, the tile display current state as COOLING - blue
* In DRY mode, the tile display current state as IDLE - black
* In FAN mode, the tile display current state as IDLE - black
* In IDLE mode, the tile display current state as IDLE - black
* In INACTIVE mode, the tile display current state as INACTIVE - transparent
### AUTO Mode
* Heather/Cooler
* In this mode we can set heathing threshold and cooling threshold temperature:
* Target temperature is calculated as a middle value between `LO` and `HI` and the rest is calculated internally.
* Thermostat
* In this mode we can set only target temperature:
* Target temperature issend to device and calculated internally:
* Calculation method in device internally:
* If the room temperature `<` Heating Setpoint, the unit will be set to HEAT with a setpoint of 23°C.
* In HEAT, if the room temperature `>` Heating Setpoint `+` 1°C, the unit will be set to FAN.
* In FAN, if the room temperature `>` Cooling Setpoint, the unit will be set to COOL with a setpoint of 19°C.
* In COOL, if the room temperature `<` Cooling Setpoint `-` 1°C, the unit will be set to FAN.
* In FAN, if the room temperature `<` Heating Setpoint, the unit will be set to HEAT with a setpoint of 23°C.
* The image shows Heating Setpoint of 19°C and a Cooling Setpoint of 23°C.
<p align="center">
<a href="https://github.com/grzegorz914/homebridge-melcloud-control"><img src="https://raw.githubusercontent.com/grzegorz914/homebridge-melcloud-control/main/graphics/auto.png" width="840"></a>
</p>
### Configuration
* Run this plugin as a [Child Bridge](https://github.com/homebridge/homebridge/wiki/Child-Bridges) (Highly Recommended), this prevent crash Homebridge if plugin crashes.
* Install and use [Homebridge Config UI X](https://github.com/homebridge/homebridge-config-ui-x/wiki) to configure this plugin, required for version v3 and above.
* The `sample-config.json` can be edited and used as an alternative.
<p align="center">
<a href="https://github.com/grzegorz914/homebridge-melcloud-control"><img src="https://raw.githubusercontent.com/grzegorz914/homebridge-melcloud-control/main/graphics/ustawienia.png" width="840"></a>
</p>
<p align="center">
<a href="https://github.com/grzegorz914/homebridge-melcloud-control"><img src="https://raw.githubusercontent.com/grzegorz914/homebridge-melcloud-control/main/graphics/homekit.png" width="375"></a>
<a href="https://github.com/grzegorz914/homebridge-melcloud-control"><img src="https://raw.githubusercontent.com/grzegorz914/homebridge-melcloud-control/main/graphics/settings.png" width="132"></a>
<a href="https://github.com/grzegorz914/homebridge-melcloud-control"><img src="https://raw.githubusercontent.com/grzegorz914/homebridge-melcloud-control/main/graphics/settings1.png" width="132"></a>
<a href="https://github.com/grzegorz914/homebridge-melcloud-control"><img src="https://raw.githubusercontent.com/grzegorz914/homebridge-melcloud-control/main/graphics/settings2.png" width="132"></a>
</p>
| Key | Description |
| --- | --- |
| `name` | Here set the own account name. |
| `user` | Here set the MELCloud username. |
| `passwd` | Here set the MELCloud password. |
| `language` | Here select the MELCloud language. |
| `ataDevices` | Array of ATA devices created automatically after login to MELCloud from plugin config UI. |
| `ataDevices.id` | Read only data, do not change it. |
| `ataDevices.type` | Read only data, do not change it. |
| `ataDevices.typeString` | Read only data, do not change it. |
| `ataDevices.name` | Here You can schange the `Accessory Name` which is exposed to the `Homebridge/HomeKit`. |
| `ataDevices.displayMode` | Here select device control mode `None/Disabled`, `Heater/Cooler`, `Thermostat`. |
| `ataDevices.heatDryFanMode` | Here select the operatiing mode for `Heat`, if this mode is not supported, it will be disabled. |
| `ataDevices.coolDryFanMode` | Here select the operatiing mode for `Cool`, if this mode is not supported, it will be disabled. |
| `ataDevices.autoDryFanMode` | Here select the operatiing mode for `Auto`, if this mode is not supported, it will be disabled.. |
| `ataDevices.temperatureSensor` | This enable extra `Room` temperature sensors to use with automations in HomeKit app. |
| `ataDevices.temperatureSensorOutdoor` | This enable extra `Outdoor` temperature sensors to use with automations in HomeKit app. |
| `ataDevices.refreshInterval` | Here set the background devices state refresh time in (sec), default `5s`. |
| `ataDevices.presets` | Array of ATA device Presets created automatically after login to MELCloud from plugin config UI. |
| `ataDevices.presets.id` | Read only data, do not change it. |
| `ataDevices.presets.name` | Here You can schange the `Preset Name` which is exposed to the `Homebridge/HomeKit`. |
| `ataDevices.presets.displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Outlet`, `2 - Switch`, `3 - Motion Sensor`, `4 - Occupancy Sensor`, `5 - Contact Sensor`. |
| `buttonsSensors` | Array of buttons sensors. |
| `buttonsSensors.name` | Here set `Button Name` which You want expose to the `Homebridge/HomeKit`. |
| `buttonsSensors.mode` | Here select button mode, VH - Vane Horizontal, VV - Vane Horizontal. |
| `buttonsSensors.displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Outlet`, `2 - Switch`, `3 - Motion Sensor`, `4 - Occupancy Sensor`, `5 - Contact Sensor`. |
| `buttonsSensors.namePrefix` | Here enable/disable the accessory name as a prefix for button/sensor name. |
| `atwDevices` | Array of ATA devices created automatically after login to MELCloud from plugin config UI. |
| `atwDevices.id` | Read only data, do not change it. |
| `atwDevices.type` | Read only data, do not change it. |
| `atwDevices.typeString` | Read only data, do not change it. |
| `atwDevices.name` | Here You can schange the `Accessory Name` which is exposed to the `Homebridge/HomeKit`. |
| `atwDevices.displayMode` | Here select main control mode `None/Disabled`, `Heater/Cooler`, `Thermostat`. |
| `atwDevices.hideZone` | Here select which zone need to be hidden `None/Disabled`, `Heat Pump`, `Heat Pump / Zone 1`, `Heat Pump / Zone 1 / Hot Water`, `Heat Pump / Zone 1 / Zone 2`, `Heat Pump / Hot Water`,`Heat Pump / Hot Water / Zone 2`, `Heat Pump / Zone 2`, `Zone 1`, `Zone 1 / Hot Water`, `Zone 1 / Hot Water / Zone 2`, `Zone 1 / Zone 2`, `Hot Water`, `Hot Water / Zone 2`, `Zone 2`, `All`. |
| `atwDevices.temperatureSensor` | This enable extra `Room` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.temperatureSensorFlow` | This enable extra `Flow` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.temperatureSensorReturn` | This enable extra `Return` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.temperatureSensorFlowZone1` | This enable extra `Flow Zone 1` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.temperatureSensorReturnZone1` | This enable extra `Return Zone 1` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.temperatureSensorFlowWaterTank` | This enable extra `Flow Water Tank` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.temperatureSensorReturnWaterTank` | This enable extra `Return Water Tank` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.temperatureSensorFlowZone2` | This enable extra `Flow Zone 2` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.temperatureSensorReturnZone2` | This enable extra `Return Zone 2` temperature sensors to use with automations in HomeKit app. |
| `atwDevices.refreshInterval` | Here set the background devices state refresh time in (sec), default `5s`. |
| `atwDevices.presets` | Array of ATA device Presets created automatically after login to MELCloud from plugin config UI. |
| `atwDevices.presets.id` | Read only data, do not change it. |
| `atwDevices.presets.name` | Here You can schange the `Preset Name` which is exposed to the `Homebridge/HomeKit`. |
| `atwDevices.presets.displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Outlet`, `2 - Switch`, `3 - Motion Sensor`, `4 - Occupancy Sensor`, `5 - Contact Sensor`. |
| `buttonsSensors` | Array of buttons sensors. |
| `buttonsSensors.name` | Here set `Button Name` which You want expose to the `Homebridge/HomeKit`. |
| `buttonsSensors.mode` | Here select button mode. |
| `buttonsSensors.displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Outlet`, `2 - Switch`, `3 - Motion Sensor`, `4 - Occupancy Sensor`, `5 - Contact Sensor`. |
| `buttonsSensors.namePrefix` | Here enable/disable the accessory name as a prefix for button/sensor name. |
| `ervDevices` | Array of ATA devices created automatically after login to MELCloud from plugin config UI. |
| `ervDevices.id` | Read only data, do not change it. |
| `ervDevices.type` | Read only data, do not change it. |
| `ervDevices.typeString` | Read only data, do not change it. |
| `ervDevices.name` | Here You can schange the `Accessory Name` which is exposed to the `Homebridge/HomeKit`. |
| `ervDevices.displayMode` | Here select main control mode `None/Disabled`, `Heater/Cooler`, `Thermostat`. |
| `ervDevices.temperatureSensor` | This enable extra `Room` temperature sensors to use with automations in HomeKit app. |
| `ervDevices.temperatureSensorOutdoor` | This enable extra `Outdoor` temperature sensors to use with automations in HomeKit app. |
| `ervDevices.temperatureSensorSupply` | This enable extra `Supply` temperature sensors to use with automations in HomeKit app. |
| `ervDevices.refreshInterval` | Here set the background devices state refresh time in (sec), default `5s`. |
| `ervDevices.presets` | Array of ATA device Presets created automatically after login to MELCloud from plugin config UI. |
| `ervDevices.presets.id` | Read only data, do not change it. |
| `ervDevices.presets.name` | Here You can schange the `Preset Name` which is exposed to the `Homebridge/HomeKit`. |
| `ervDevices.presets.displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Outlet`, `2 - Switch`, `3 - Motion Sensor`, `4 - Occupancy Sensor`, `5 - Contact Sensor`. |
| `buttonsSensors` | Array of buttons sensors. |
| `buttonsSensors.name` | Here set `Button Name` which You want expose to the `Homebridge/HomeKit`. |
| `buttonsSensors.mode` | Here select button mode. |
| `buttonsSensors.displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Outlet`, `2 - Switch`, `3 - Motion Sensor`, `4 - Occupancy Sensor`, `5 - Contact Sensor`. |
| `buttonsSensors.namePrefix` | Here enable/disable the accessory name as a prefix for button/sensor name. |
| `refreshInterval` | Here set the background account data refresh time in (sec), default `120s`. |
| `disableLogDeviceInfo` | If enabled, add ability to disable log device info by every connections device to the network. |
| `disableLogInfo` | If enabled, disable log info, all values and state will not be displayed in Homebridge log console. |
| `disableLogSuccess` | If enabled, disable logging device success. |
| `disableLogWarn` | If enabled, disable logging device warnings. |
| `disableLogError` | If enabled, disable logging device error. |
| `enableDebugMode` | If enabled, deep log will be present in homebridge console. |
| `restFul` | This is RSTful server. |
| `restFul.enable` | If enabled, RESTful server will start automatically and respond to any path request. |
| `restFul.debug` | If enabled, deep log will be present in homebridge console for RESTFul server. |
| `mqtt` | This is MQTT Broker. |
| `mqtt.enable` | If enabled, MQTT Broker will start automatically and publish all awailable PV data. |
| `mqtt.host` | Here set the `IP Address` or `Hostname` for MQTT Broker. |
| `mqtt.port` | Here set the `Port` for MQTT Broker, default 1883. |
| `mqtt.clientId` | Here optional set the `Client Id` of MQTT Broker. |
| `mqtt.prefix` | Here set the `Prefix` for `Topic` or leave empty. |
| `mqtt.auth` | If enabled, MQTT Broker will use authorization credentials. |
| `mqtt.user` | Here set the MQTT Broker user. |
| `mqtt.passwd` | Here set the MQTT Broker password. |
| `mqtt.debug` | If enabled, deep log will be present in homebridge console for MQTT. |
### RESTful Integration
* Port: last 4 numbers of `device Id`, displayed in HB log during start.
* POST data as a JSON Object `{OperationMode: 8}`.
* Header content type must be `application/json`.
* Path `status` response all available paths.
| Method | URL | Path | Response | Type |
| --- | --- | --- | --- | --- |
| GET | `http//ip:port` | `info`, `state` | `{"Power": true, "SetTemperature": 21.5}` | JSON object. |
| Method | URL | Key | Value | Type | Description |
| --- | --- | --- | --- | --- | --- |
| Air Conditioner | | | | | |
| POST | `http//ip:port` | `Power` | `true`, `false` | boolean | Power state. |
| | `http//ip:port` | `HideVaneControls` | `true`, `false` | boolean | Hide vane controls. |
| | `http//ip:port` | `HideDryModeControl` | `true`, `false` | boolean | Hide dry mode control. |
| | `http//ip:port` | `ProhibitSetTemperature` | `true`, `false` | boolean | Lock set temperature. |
| | `http//ip:port` | `ProhibitOperationMode` | `true`, `false` | boolean | Lock set operating mode. |
| | `http//ip:port` | `ProhibitPower` | `true`, `false` | boolean | Lock set power. |
| | `http//ip:port` | `OperationMode` | `1 - Heat`, `2 - Dry`, `3 - Cool`, `7 - Fan`, `8 - Auto` | integer | Operating mode. |
| | `http//ip:port` | `FanSpeed` | `0 - Auto`, `1`, `2`, `3`, `4`, `5`, `6` | integer | Fan speed. |
| | `http//ip:port` | `VaneHorizontalDirection` | `0`, `1`, `2`, `3`, `4`, `5`, `8 - Split`, `12 - Swing` | integer | Vane H mode. |
| | `http//ip:port` | `VaneVerticalDirection` | `0`, `1`, `2`, `3`, `4`, `5`, `7 - Swing` | integer | Vane V mode. |
| | `http//ip:port` | `SetTemperature` | `0.0` | float | Room temperature. |
| | `http//ip:port` | `DefaultCoolingSetTemperature` | `0.0` | float | Default cooling temperature. |
| | `http//ip:port` | `DefaultHeatingSetTemperature` | `0.0` | float | Default heating temperature. |
| Heat Pump | | | | | |
| POST | `http//ip:port` | `Power` | `true`, `false` | boolean | Power state. |
| | `http//ip:port` | `ForcedHotWaterMode` | `true`, `false` | boolean | Force hot water. |
| | `http//ip:port` | `EcoHotWater` | `true`, `false` | boolean | Eco hot water. |
| | `http//ip:port` | `HolidayMode` | `true`, `false` | boolean | Holiday mode. |
| | `http//ip:port` | `ProhibitZone1` | `true`, `false` | boolean | Lock control zone 1. |
| | `http//ip:port` | `ProhibitZone2` | `true`, `false` | boolean | Lock control zone 2. |
| | `http//ip:port` | `ProhibitHotWater` | `true`, `false` | boolean | Lock control hot water. |
| | `http//ip:port` | `OperationMode` | `0 - Auto`, `1 - Heat`, `2 - Cool` | integer | Operating mode heat pump. |
| | `http//ip:port` | `OperationModeZone1` | `0 - Heat Thermostat`, `1 - Heat Flow`, `2 - Heat Curve`, `3 - Cool Thermostat`, `4 - Cool Flow`, `5 - Flor Dry Up` | integer | Operating mode zone 1. |
| | `http//ip:port` | `OperationModeZone2` | `0 - Heat Thermostat`, `1 - Heat Flow`, `2 - Heat Curve`, `3 - Cool Thermostat`, `4 - Cool Flow`, `5 - Flor Dry Up` | integer | Operating mode zone 2. |
| | `http//ip:port` | `SetTemperatureZone1` | `0.0` | float | Temperature zone 1. |
| | `http//ip:port` | `SetTemperatureZone2` | `0.0` | float | Temperature zone 2. |
| | `http//ip:port` | `SetHeatFlowTemperatureZone1` | `0.0` | float | Heat flow temperature zone 1. |
| | `http//ip:port` | `SetHeatFlowTemperatureZone2` | `0.0` | float | Heat flow temperature zone 2. |
| | `http//ip:port` | `SetCoolFlowTemperatureZone1` | `0.0` | float | Cool flow temperature zone 1. |
| | `http//ip:port` | `SetCoolFlowTemperatureZone2` | `0.0` | float | Cool flow temperature zone 2. |
| | `http//ip:port` | `SetTankWaterTemperature` | `0.0` | float | Hot water temperature. |
| Energy Recovery Ventilation | | | | | |
| POST | `http//ip:port` | `Power` | `true`, `false` | boolean | Power state. |
| | `http//ip:port` | `NightPurgeMode` | `true`, `false` | boolean | Night purge mode. |
| | `http//ip:port` | `HideRoomTemperature` | `true`, `false` | boolean | Hide room temperature. |
| | `http//ip:port` | `HideSupplyTemperature` | `true`, `false` | boolean | Hide supply temperature. |
| | `http//ip:port` | `HideOutdoorTemperature` | `true`, `false` | boolean | Hide outdoor temperature. |
| | `http//ip:port` | `OperationMode` | `1 - Heat`, `3 - Cool`, `7 - Fan`, `8 - Auto` | integer | Operating mode. |
| | `http//ip:port` | `VentilationMode` | `0 - Lossnay`, `1 - Bypass`, `2 - Auto` | integer | Ventilation mode. |
| | `http//ip:port` | `SetFanSpeed` | `0 - Auto`, `1`, `2`, `3`, `4` | integer | Fan speed. |
| | `http//ip:port` | `SetTemperature` | `0.0` | float | Room temperature. |
| | `http//ip:port` | `DefaultCoolingSetTemperature` | `0.0` | float | Default cooling temperature. |
| | `http//ip:port` | `DefaultHeatingSetTemperature` | `0.0` | float | Default heating temperature. |
### MQTT Integration
* Subscribe data as a JSON Object `{"Power": true}`
| Direction | Topic | Message | Type |
| --- | --- | --- | --- |
| Publish | `Info`, `State` | `{"Power": true, "SetTemperature": 21.5}` | JSON object. |
| Method | Topic | Key | Value | Type | Description |
| --- | --- | --- | --- | --- | --- |
| Air Conditioner | | | | | |
| Subscribe | `Set` | `Power` | `true`, `false` | boolean | Power state. |
| | `Set` | `HideVaneControls` | `true`, `false` | boolean | Hide vane controls. |
| | `Set` | `HideDryModeControl` | `true`, `false` | boolean | Hide dry mode control. |
| | `Set` | `ProhibitSetTemperature` | `true`, `false` | boolean | Lock set temperature. |
| | `Set` | `ProhibitOperationMode` | `true`, `false` | boolean | Lock set operating mode. |
| | `Set` | `ProhibitPower` | `true`, `false` | boolean | Lock set power. |
| | `Set` | `OperationMode` | `1 - Heat`, `2 - Dry`, `3 - Cool`, `7 - Fan`, `8 - Auto` | integer | Operating mode. |
| | `Set` | `FanSpeed` | `0 - Auto`, `1`, `2`, `3`, `4`, `5`, `6` | integer | Fan speed. |
| | `Set` | `VaneHorizontalDirection` | `0`, `1`, `2`, `3`, `4`, `5`, `8 - Split`, `12 - Swing` | integer | Vane H mode. |
| | `Set` | `VaneVerticalDirection` | `0`, `1`, `2`, `3`, `4`, `5`, `7 - Swing` | integer | Vane V mode. |
| | `Set` | `SetTemperature` | `0.0` | float | Room temperature. |
| | `Set` | `DefaultCoolingSetTemperature` | `23.0` | float | Default cooling temperature. |
| | `Set` | `DefaultHeatingSetTemperature` | `21.0` | float | Default heating temperature. |
| Heat Pump | | | | | |
| Subscribe | `Set` | `Power` | `true`, `false` | boolean | Power state. |
| | `Set` | `ForcedHotWaterMode` | `true`, `false` | boolean | Force hot water. |
| | `Set` | `EcoHotWater` | `true`, `false` | boolean | Eco hot water. |
| | `Set` | `HolidayMode` | `true`, `false` | boolean | Holiday mode. |
| | `Set` | `ProhibitZone1` | `true`, `false` | boolean | Lock control zone 1. |
| | `Set` | `ProhibitZone2` | `true`, `false` | boolean | Lock control zone 2. |
| | `Set` | `ProhibitHotWater` | `true`, `false` | boolean | Lock control hot water. |
| | `Set` | `OperationMode` | `0 - Auto`, `1 - Heat`, `2 - Cool` | integer | Operating mode heat pump. |
| | `Set` | `OperationModeZone1` | `0 - Heat Thermostat`, `1 - Heat Flow`, `2 - Heat Curve`, `3 - Cool Thermostat`, `4 - Cool Flow`, `5 - Flor Dry Up` | integer | Operating mode zone 1. |
| | `Set` | `OperationModeZone2` | `0 - Heat Thermostat`, `1 - Heat Flow`, `2 - Heat Curve`, `3 - Cool Thermostat`, `4 - Cool Flow`, `5 - Flor Dry Up` | integer | Operating mode zone 2. |
| | `Set` | `SetTemperatureZone1` | `0.0` | float | Temperature zone 1. |
| | `Set` | `SetTemperatureZone2` | `0.0` | float | Temperature zone 2. |
| | `Set` | `SetHeatFlowTemperatureZone1` | `0.0` | float | Heat flow temperature zone 1. |
| | `Set` | `SetHeatFlowTemperatureZone2` | `0.0` | float | Heat flow temperature zone 2. |
| | `Set` | `SetCoolFlowTemperatureZone1` | `0.0` | float | Cool flow temperature zone 1. |
| | `Set` | `SetCoolFlowTemperatureZone2` | `0.0` | float | Cool flow temperature zone 2. |
| | `Set` | `SetTankWaterTemperature` | `0.0` | float | Hot water temperature. |
| Energy Recovery Ventilation | | | | | |
| Subscribe | `Set` | `Power` | `true`, `false` | boolean | Power state. |
| | `Set` | `NightPurgeMode` | `true`, `false` | boolean | Night purge mode. |
| | `Set` | `HideRoomTemperature` | `true`, `false` | boolean | Hide room temperature. |
| | `Set` | `HideSupplyTemperature` | `true`, `false` | boolean | Hide supply temperature. |
| | `Set` | `HideOutdoorTemperature` | `true`, `false` | boolean | Hide outdoor temperature. |
| | `Set` | `OperationMode` | `1 - Heat`, `3 - Cool`, `7 - Fan`, `8 - Auto` | integer | Operating mode. |
| | `Set` | `VentilationMode` | `0 - Lossnay`, `1 - Bypass`, `2 - Auto` | integer | Ventilation mode. |
| | `Set` | `SetFanSpeed` | `0 - Auto`, `1`, `2`, `3`, `4` | integer | Fan speed. |
| | `Set` | `SetTemperature` | `0.0` | float | Room temperature. |
| | `Set` | `DefaultCoolingSetTemperature` | `23.0` | float | Default cooling temperature. |
| | `Set` | `DefaultHeatingSetTemperature` | `21.0` | float | Default heating temperature. |