grunt-tsc

/*! ***************************************************************************** Copyright (c) Microsoft Corporation. All rights reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 THIS CODE IS PROVIDED ON AN *AS IS* BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OR CONDITIONS OF TITLE, FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABLITY OR NON-INFRINGEMENT. See the Apache Version 2.0 License for specific language governing permissions and limitations under the License. ***************************************************************************** */ /// <reference path="lib.core.d.ts" /> ///////////////////////////// /// IE10 ECMAScript Extensions ///////////////////////////// /** * Represents a raw buffer of binary data, which is used to store data for the * different typed arrays. ArrayBuffers cannot be read from or written to directly, * but can be passed to a typed array or DataView Object to interpret the raw * buffer as needed. */ interface ArrayBuffer { /** * Read-only. The length of the ArrayBuffer (in bytes). */ byteLength: number; /** * Returns a section of an ArrayBuffer. */ slice(begin:number, end?:number): ArrayBuffer; } interface ArrayBufferConstructor { prototype: ArrayBuffer; new (byteLength: number): ArrayBuffer; isView(arg: any): boolean; } declare var ArrayBuffer: ArrayBufferConstructor; interface ArrayBufferView { /** * The ArrayBuffer instance referenced by the array. */ buffer: ArrayBuffer; /** * The length in bytes of the array. */ byteLength: number; /** * The offset in bytes of the array. */ byteOffset: number; } interface DataView { buffer: ArrayBuffer; byteLength: number; byteOffset: number; /** * Gets the Float32 value at the specified byte offset from the start of the view. There is * no alignment constraint; multi-byte values may be fetched from any offset. * @param byteOffset The place in the buffer at which the value should be retrieved. */ getFloat32(byteOffset: number, littleEndian: boolean): number; /** * Gets the Float64 value at the specified byte offset from the start of the view. There is * no alignment constraint; multi-byte values may be fetched from any offset. * @param byteOffset The place in the buffer at which the value should be retrieved. */ getFloat64(byteOffset: number, littleEndian: boolean): number; /** * Gets the Int8 value at the specified byte offset from the start of the view. There is * no alignment constraint; multi-byte values may be fetched from any offset. * @param byteOffset The place in the buffer at which the value should be retrieved. */ getInt8(byteOffset: number): number; /** * Gets the Int16 value at the specified byte offset from the start of the view. There is * no alignment constraint; multi-byte values may be fetched from any offset. * @param byteOffset The place in the buffer at which the value should be retrieved. */ getInt16(byteOffset: number, littleEndian: boolean): number; /** * Gets the Int32 value at the specified byte offset from the start of the view. There is * no alignment constraint; multi-byte values may be fetched from any offset. * @param byteOffset The place in the buffer at which the value should be retrieved. */ getInt32(byteOffset: number, littleEndian: boolean): number; /** * Gets the Uint8 value at the specified byte offset from the start of the view. There is * no alignment constraint; multi-byte values may be fetched from any offset. * @param byteOffset The place in the buffer at which the value should be retrieved. */ getUint8(byteOffset: number): number; /** * Gets the Uint16 value at the specified byte offset from the start of the view. There is * no alignment constraint; multi-byte values may be fetched from any offset. * @param byteOffset The place in the buffer at which the value should be retrieved. */ getUint16(byteOffset: number, littleEndian: boolean): number; /** * Gets the Uint32 value at the specified byte offset from the start of the view. There is * no alignment constraint; multi-byte values may be fetched from any offset. * @param byteOffset The place in the buffer at which the value should be retrieved. */ getUint32(byteOffset: number, littleEndian: boolean): number; /** * Stores an Float32 value at the specified byte offset from the start of the view. * @param byteOffset The place in the buffer at which the value should be set. * @param value The value to set. * @param littleEndian If false or undefined, a big-endian value should be written, * otherwise a little-endian value should be written. */ setFloat32(byteOffset: number, value: number, littleEndian: boolean): void; /** * Stores an Float64 value at the specified byte offset from the start of the view. * @param byteOffset The place in the buffer at which the value should be set. * @param value The value to set. * @param littleEndian If false or undefined, a big-endian value should be written, * otherwise a little-endian value should be written. */ setFloat64(byteOffset: number, value: number, littleEndian: boolean): void; /** * Stores an Int8 value at the specified byte offset from the start of the view. * @param byteOffset The place in the buffer at which the value should be set. * @param value The value to set. */ setInt8(byteOffset: number, value: number): void; /** * Stores an Int16 value at the specified byte offset from the start of the view. * @param byteOffset The place in the buffer at which the value should be set. * @param value The value to set. * @param littleEndian If false or undefined, a big-endian value should be written, * otherwise a little-endian value should be written. */ setInt16(byteOffset: number, value: number, littleEndian: boolean): void; /** * Stores an Int32 value at the specified byte offset from the start of the view. * @param byteOffset The place in the buffer at which the value should be set. * @param value The value to set. * @param littleEndian If false or undefined, a big-endian value should be written, * otherwise a little-endian value should be written. */ setInt32(byteOffset: number, value: number, littleEndian: boolean): void; /** * Stores an Uint8 value at the specified byte offset from the start of the view. * @param byteOffset The place in the buffer at which the value should be set. * @param value The value to set. */ setUint8(byteOffset: number, value: number): void; /** * Stores an Uint16 value at the specified byte offset from the start of the view. * @param byteOffset The place in the buffer at which the value should be set. * @param value The value to set. * @param littleEndian If false or undefined, a big-endian value should be written, * otherwise a little-endian value should be written. */ setUint16(byteOffset: number, value: number, littleEndian: boolean): void; /** * Stores an Uint32 value at the specified byte offset from the start of the view. * @param byteOffset The place in the buffer at which the value should be set. * @param value The value to set. * @param littleEndian If false or undefined, a big-endian value should be written, * otherwise a little-endian value should be written. */ setUint32(byteOffset: number, value: number, littleEndian: boolean): void; } interface DataViewConstructor { new (buffer: ArrayBuffer, byteOffset?: number, byteLength?: number): DataView; } declare var DataView: DataViewConstructor; /** * A typed array of 8-bit integer values. The contents are initialized to 0. If the requested * number of bytes could not be allocated an exception is raised. */ interface Int8Array { /** * The size in bytes of each element in the array. */ BYTES_PER_ELEMENT: number; /** * The ArrayBuffer instance referenced by the array. */ buffer: ArrayBuffer; /** * The length in bytes of the array. */ byteLength: number; /** * The offset in bytes of the array. */ byteOffset: number; /** * Returns the this object after copying a section of the array identified by start and end * to the same array starting at position target * @param target If target is negative, it is treated as length+target where length is the * length of the array. * @param start If start is negative, it is treated as length+start. If end is negative, it * is treated as length+end. * @param end If not specified, length of the this object is used as its default value. */ copyWithin(target: number, start: number, end?: number): Int8Array; /** * Determines whether all the members of an array satisfy the specified test. * @param callbackfn A function that accepts up to three arguments. The every method calls * the callbackfn function for each element in array1 until the callbackfn returns false, * or until the end of the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ every(callbackfn: (value: number, index: number, array: Int8Array) => boolean, thisArg?: any): boolean; /** * Returns the this object after filling the section identified by start and end with value * @param value value to fill array section with * @param start index to start filling the array at. If start is negative, it is treated as * length+start where length is the length of the array. * @param end index to stop filling the array at. If end is negative, it is treated as * length+end. */ fill(value: number, start?: number, end?: number): Int8Array; /** * Returns the elements of an array that meet the condition specified in a callback function. * @param callbackfn A function that accepts up to three arguments. The filter method calls * the callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ filter(callbackfn: (value: number, index: number, array: Int8Array) => boolean, thisArg?: any): Int8Array; /** * Returns the value of the first element in the array where predicate is true, and undefined * otherwise. * @param predicate find calls predicate once for each element of the array, in ascending * order, until it finds one where predicate returns true. If such an element is found, find * immediately returns that element value. Otherwise, find returns undefined. * @param thisArg If provided, it will be used as the this value for each invocation of * predicate. If it is not provided, undefined is used instead. */ find(predicate: (value: number, index: number, obj: Array<number>) => boolean, thisArg?: any): number; /** * Returns the index of the first element in the array where predicate is true, and undefined * otherwise. * @param predicate find calls predicate once for each element of the array, in ascending * order, until it finds one where predicate returns true. If such an element is found, find * immediately returns that element value. Otherwise, find returns undefined. * @param thisArg If provided, it will be used as the this value for each invocation of * predicate. If it is not provided, undefined is used instead. */ findIndex(predicate: (value: number) => boolean, thisArg?: any): number; /** * Performs the specified action for each element in an array. * @param callbackfn A function that accepts up to three arguments. forEach calls the * callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ forEach(callbackfn: (value: number, index: number, array: Int8Array) => void, thisArg?: any): void; /** * Returns the index of the first occurrence of a value in an array. * @param searchElement The value to locate in the array. * @param fromIndex The array index at which to begin the search. If fromIndex is omitted, the * search starts at index 0. */ indexOf(searchElement: number, fromIndex?: number): number; /** * Adds all the elements of an array separated by the specified separator string. * @param separator A string used to separate one element of an array from the next in the * resulting String. If omitted, the array elements are separated with a comma. */ join(separator?: string): string; /** * Returns the index of the last occurrence of a value in an array. * @param searchElement The value to locate in the array. * @param fromIndex The array index at which to begin the search. If fromIndex is omitted, the * search starts at index 0. */ lastIndexOf(searchElement: number, fromIndex?: number): number; /** * The length of the array. */ length: number; /** * Calls a defined callback function on each element of an array, and returns an array that * contains the results. * @param callbackfn A function that accepts up to three arguments. The map method calls the * callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ map(callbackfn: (value: number, index: number, array: Int8Array) => number, thisArg?: any): Int8Array; /** * Calls the specified callback function for all the elements in an array. The return value of * the callback function is the accumulated result, and is provided as an argument in the next * call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduce method calls the * callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduce(callbackfn: (previousValue: number, currentValue: number, currentIndex: number, array: Int8Array) => number, initialValue?: number): number; /** * Calls the specified callback function for all the elements in an array. The return value of * the callback function is the accumulated result, and is provided as an argument in the next * call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduce method calls the * callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduce(callbackfn: (previousValue: U, currentValue: number, currentIndex: number, array: Int8Array) => U, initialValue: U): U; /** * Calls the specified callback function for all the elements in an array, in descending order. * The return value of the callback function is the accumulated result, and is provided as an * argument in the next call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduceRight method calls * the callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an * argument instead of an array value. */ reduceRight(callbackfn: (previousValue: number, currentValue: number, currentIndex: number, array: Int8Array) => number, initialValue?: number): number; /** * Calls the specified callback function for all the elements in an array, in descending order. * The return value of the callback function is the accumulated result, and is provided as an * argument in the next call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduceRight method calls * the callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduceRight(callbackfn: (previousValue: U, currentValue: number, currentIndex: number, array: Int8Array) => U, initialValue: U): U; /** * Reverses the elements in an Array. */ reverse(): Int8Array; /** * Sets a value or an array of values. * @param index The index of the location to set. * @param value The value to set. */ set(index: number, value: number): void; /** * Sets a value or an array of values. * @param array A typed or untyped array of values to set. * @param offset The index in the current array at which the values are to be written. */ set(array: Int8Array, offset?: number): void; /** * Returns a section of an array. * @param start The beginning of the specified portion of the array. * @param end The end of the specified portion of the array. */ slice(start?: number, end?: number): Int8Array; /** * Determines whether the specified callback function returns true for any element of an array. * @param callbackfn A function that accepts up to three arguments. The some method calls the * callbackfn function for each element in array1 until the callbackfn returns true, or until * the end of the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ some(callbackfn: (value: number, index: number, array: Int8Array) => boolean, thisArg?: any): boolean; /** * Sorts an array. * @param compareFn The name of the function used to determine the order of the elements. If * omitted, the elements are sorted in ascending, ASCII character order. */ sort(compareFn?: (a: number, b: number) => number): Int8Array; /** * Gets a new Int8Array view of the ArrayBuffer store for this array, referencing the elements * at begin, inclusive, up to end, exclusive. * @param begin The index of the beginning of the array. * @param end The index of the end of the array. */ subarray(begin: number, end?: number): Int8Array; /** * Converts a number to a string by using the current locale. */ toLocaleString(): string; /** * Returns a string representation of an array. */ toString(): string; [index: number]: number; } interface Int8ArrayConstructor { prototype: Int8Array; new (length: number): Int8Array; new (array: Int8Array): Int8Array; new (array: number[]): Int8Array; new (buffer: ArrayBuffer, byteOffset?: number, length?: number): Int8Array; /** * The size in bytes of each element in the array. */ BYTES_PER_ELEMENT: number; /** * Returns a new array from a set of elements. * @param items A set of elements to include in the new array object. */ of(...items: number[]): Int8Array; } declare var Int8Array: Int8ArrayConstructor; /** * A typed array of 8-bit unsigned integer values. The contents are initialized to 0. If the * requested number of bytes could not be allocated an exception is raised. */ interface Uint8Array { /** * The size in bytes of each element in the array. */ BYTES_PER_ELEMENT: number; /** * The ArrayBuffer instance referenced by the array. */ buffer: ArrayBuffer; /** * The length in bytes of the array. */ byteLength: number; /** * The offset in bytes of the array. */ byteOffset: number; /** * Returns the this object after copying a section of the array identified by start and end * to the same array starting at position target * @param target If target is negative, it is treated as length+target where length is the * length of the array. * @param start If start is negative, it is treated as length+start. If end is negative, it * is treated as length+end. * @param end If not specified, length of the this object is used as its default value. */ copyWithin(target: number, start: number, end?: number): Uint8Array; /** * Determines whether all the members of an array satisfy the specified test. * @param callbackfn A function that accepts up to three arguments. The every method calls * the callbackfn function for each element in array1 until the callbackfn returns false, * or until the end of the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ every(callbackfn: (value: number, index: number, array: Uint8Array) => boolean, thisArg?: any): boolean; /** * Returns the this object after filling the section identified by start and end with value * @param value value to fill array section with * @param start index to start filling the array at. If start is negative, it is treated as * length+start where length is the length of the array. * @param end index to stop filling the array at. If end is negative, it is treated as * length+end. */ fill(value: number, start?: number, end?: number): Uint8Array; /** * Returns the elements of an array that meet the condition specified in a callback function. * @param callbackfn A function that accepts up to three arguments. The filter method calls * the callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ filter(callbackfn: (value: number, index: number, array: Uint8Array) => boolean, thisArg?: any): Uint8Array; /** * Returns the value of the first element in the array where predicate is true, and undefined * otherwise. * @param predicate find calls predicate once for each element of the array, in ascending * order, until it finds one where predicate returns true. If such an element is found, find * immediately returns that element value. Otherwise, find returns undefined. * @param thisArg If provided, it will be used as the this value for each invocation of * predicate. If it is not provided, undefined is used instead. */ find(predicate: (value: number, index: number, obj: Array<number>) => boolean, thisArg?: any): number; /** * Returns the index of the first element in the array where predicate is true, and undefined * otherwise. * @param predicate find calls predicate once for each element of the array, in ascending * order, until it finds one where predicate returns true. If such an element is found, find * immediately returns that element value. Otherwise, find returns undefined. * @param thisArg If provided, it will be used as the this value for each invocation of * predicate. If it is not provided, undefined is used instead. */ findIndex(predicate: (value: number) => boolean, thisArg?: any): number; /** * Performs the specified action for each element in an array. * @param callbackfn A function that accepts up to three arguments. forEach calls the * callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ forEach(callbackfn: (value: number, index: number, array: Uint8Array) => void, thisArg?: any): void; /** * Returns the index of the first occurrence of a value in an array. * @param searchElement The value to locate in the array. * @param fromIndex The array index at which to begin the search. If fromIndex is omitted, the * search starts at index 0. */ indexOf(searchElement: number, fromIndex?: number): number; /** * Adds all the elements of an array separated by the specified separator string. * @param separator A string used to separate one element of an array from the next in the * resulting String. If omitted, the array elements are separated with a comma. */ join(separator?: string): string; /** * Returns the index of the last occurrence of a value in an array. * @param searchElement The value to locate in the array. * @param fromIndex The array index at which to begin the search. If fromIndex is omitted, the * search starts at index 0. */ lastIndexOf(searchElement: number, fromIndex?: number): number; /** * The length of the array. */ length: number; /** * Calls a defined callback function on each element of an array, and returns an array that * contains the results. * @param callbackfn A function that accepts up to three arguments. The map method calls the * callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ map(callbackfn: (value: number, index: number, array: Uint8Array) => number, thisArg?: any): Uint8Array; /** * Calls the specified callback function for all the elements in an array. The return value of * the callback function is the accumulated result, and is provided as an argument in the next * call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduce method calls the * callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduce(callbackfn: (previousValue: number, currentValue: number, currentIndex: number, array: Uint8Array) => number, initialValue?: number): number; /** * Calls the specified callback function for all the elements in an array. The return value of * the callback function is the accumulated result, and is provided as an argument in the next * call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduce method calls the * callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduce(callbackfn: (previousValue: U, currentValue: number, currentIndex: number, array: Uint8Array) => U, initialValue: U): U; /** * Calls the specified callback function for all the elements in an array, in descending order. * The return value of the callback function is the accumulated result, and is provided as an * argument in the next call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduceRight method calls * the callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an * argument instead of an array value. */ reduceRight(callbackfn: (previousValue: number, currentValue: number, currentIndex: number, array: Uint8Array) => number, initialValue?: number): number; /** * Calls the specified callback function for all the elements in an array, in descending order. * The return value of the callback function is the accumulated result, and is provided as an * argument in the next call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduceRight method calls * the callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduceRight(callbackfn: (previousValue: U, currentValue: number, currentIndex: number, array: Uint8Array) => U, initialValue: U): U; /** * Reverses the elements in an Array. */ reverse(): Uint8Array; /** * Sets a value or an array of values. * @param index The index of the location to set. * @param value The value to set. */ set(index: number, value: number): void; /** * Sets a value or an array of values. * @param array A typed or untyped array of values to set. * @param offset The index in the current array at which the values are to be written. */ set(array: Uint8Array, offset?: number): void; /** * Returns a section of an array. * @param start The beginning of the specified portion of the array. * @param end The end of the specified portion of the array. */ slice(start?: number, end?: number): Uint8Array; /** * Determines whether the specified callback function returns true for any element of an array. * @param callbackfn A function that accepts up to three arguments. The some method calls the * callbackfn function for each element in array1 until the callbackfn returns true, or until * the end of the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ some(callbackfn: (value: number, index: number, array: Uint8Array) => boolean, thisArg?: any): boolean; /** * Sorts an array. * @param compareFn The name of the function used to determine the order of the elements. If * omitted, the elements are sorted in ascending, ASCII character order. */ sort(compareFn?: (a: number, b: number) => number): Uint8Array; /** * Gets a new Uint8Array view of the ArrayBuffer store for this array, referencing the elements * at begin, inclusive, up to end, exclusive. * @param begin The index of the beginning of the array. * @param end The index of the end of the array. */ subarray(begin: number, end?: number): Uint8Array; /** * Converts a number to a string by using the current locale. */ toLocaleString(): string; /** * Returns a string representation of an array. */ toString(): string; [index: number]: number; } interface Uint8ArrayConstructor { prototype: Uint8Array; new (length: number): Uint8Array; new (array: Uint8Array): Uint8Array; new (array: number[]): Uint8Array; new (buffer: ArrayBuffer, byteOffset?: number, length?: number): Uint8Array; /** * The size in bytes of each element in the array. */ BYTES_PER_ELEMENT: number; /** * Returns a new array from a set of elements. * @param items A set of elements to include in the new array object. */ of(...items: number[]): Uint8Array; } declare var Uint8Array: Uint8ArrayConstructor; /** * A typed array of 16-bit signed integer values. The contents are initialized to 0. If the * requested number of bytes could not be allocated an exception is raised. */ interface Int16Array { /** * The size in bytes of each element in the array. */ BYTES_PER_ELEMENT: number; /** * The ArrayBuffer instance referenced by the array. */ buffer: ArrayBuffer; /** * The length in bytes of the array. */ byteLength: number; /** * The offset in bytes of the array. */ byteOffset: number; /** * Returns the this object after copying a section of the array identified by start and end * to the same array starting at position target * @param target If target is negative, it is treated as length+target where length is the * length of the array. * @param start If start is negative, it is treated as length+start. If end is negative, it * is treated as length+end. * @param end If not specified, length of the this object is used as its default value. */ copyWithin(target: number, start: number, end?: number): Int16Array; /** * Determines whether all the members of an array satisfy the specified test. * @param callbackfn A function that accepts up to three arguments. The every method calls * the callbackfn function for each element in array1 until the callbackfn returns false, * or until the end of the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ every(callbackfn: (value: number, index: number, array: Int16Array) => boolean, thisArg?: any): boolean; /** * Returns the this object after filling the section identified by start and end with value * @param value value to fill array section with * @param start index to start filling the array at. If start is negative, it is treated as * length+start where length is the length of the array. * @param end index to stop filling the array at. If end is negative, it is treated as * length+end. */ fill(value: number, start?: number, end?: number): Int16Array; /** * Returns the elements of an array that meet the condition specified in a callback function. * @param callbackfn A function that accepts up to three arguments. The filter method calls * the callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ filter(callbackfn: (value: number, index: number, array: Int16Array) => boolean, thisArg?: any): Int16Array; /** * Returns the value of the first element in the array where predicate is true, and undefined * otherwise. * @param predicate find calls predicate once for each element of the array, in ascending * order, until it finds one where predicate returns true. If such an element is found, find * immediately returns that element value. Otherwise, find returns undefined. * @param thisArg If provided, it will be used as the this value for each invocation of * predicate. If it is not provided, undefined is used instead. */ find(predicate: (value: number, index: number, obj: Array<number>) => boolean, thisArg?: any): number; /** * Returns the index of the first element in the array where predicate is true, and undefined * otherwise. * @param predicate find calls predicate once for each element of the array, in ascending * order, until it finds one where predicate returns true. If such an element is found, find * immediately returns that element value. Otherwise, find returns undefined. * @param thisArg If provided, it will be used as the this value for each invocation of * predicate. If it is not provided, undefined is used instead. */ findIndex(predicate: (value: number) => boolean, thisArg?: any): number; /** * Performs the specified action for each element in an array. * @param callbackfn A function that accepts up to three arguments. forEach calls the * callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ forEach(callbackfn: (value: number, index: number, array: Int16Array) => void, thisArg?: any): void; /** * Returns the index of the first occurrence of a value in an array. * @param searchElement The value to locate in the array. * @param fromIndex The array index at which to begin the search. If fromIndex is omitted, the * search starts at index 0. */ indexOf(searchElement: number, fromIndex?: number): number; /** * Adds all the elements of an array separated by the specified separator string. * @param separator A string used to separate one element of an array from the next in the * resulting String. If omitted, the array elements are separated with a comma. */ join(separator?: string): string; /** * Returns the index of the last occurrence of a value in an array. * @param searchElement The value to locate in the array. * @param fromIndex The array index at which to begin the search. If fromIndex is omitted, the * search starts at index 0. */ lastIndexOf(searchElement: number, fromIndex?: number): number; /** * The length of the array. */ length: number; /** * Calls a defined callback function on each element of an array, and returns an array that * contains the results. * @param callbackfn A function that accepts up to three arguments. The map method calls the * callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ map(callbackfn: (value: number, index: number, array: Int16Array) => number, thisArg?: any): Int16Array; /** * Calls the specified callback function for all the elements in an array. The return value of * the callback function is the accumulated result, and is provided as an argument in the next * call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduce method calls the * callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduce(callbackfn: (previousValue: number, currentValue: number, currentIndex: number, array: Int16Array) => number, initialValue?: number): number; /** * Calls the specified callback function for all the elements in an array. The return value of * the callback function is the accumulated result, and is provided as an argument in the next * call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduce method calls the * callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduce(callbackfn: (previousValue: U, currentValue: number, currentIndex: number, array: Int16Array) => U, initialValue: U): U; /** * Calls the specified callback function for all the elements in an array, in descending order. * The return value of the callback function is the accumulated result, and is provided as an * argument in the next call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduceRight method calls * the callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an * argument instead of an array value. */ reduceRight(callbackfn: (previousValue: number, currentValue: number, currentIndex: number, array: Int16Array) => number, initialValue?: number): number; /** * Calls the specified callback function for all the elements in an array, in descending order. * The return value of the callback function is the accumulated result, and is provided as an * argument in the next call to the callback function. * @param callbackfn A function that accepts up to four arguments. The reduceRight method calls * the callbackfn function one time for each element in the array. * @param initialValue If initialValue is specified, it is used as the initial value to start * the accumulation. The first call to the callbackfn function provides this value as an argument * instead of an array value. */ reduceRight(callbackfn: (previousValue: U, currentValue: number, currentIndex: number, array: Int16Array) => U, initialValue: U): U; /** * Reverses the elements in an Array. */ reverse(): Int16Array; /** * Sets a value or an array of values. * @param index The index of the location to set. * @param value The value to set. */ set(index: number, value: number): void; /** * Sets a value or an array of values. * @param array A typed or untyped array of values to set. * @param offset The index in the current array at which the values are to be written. */ set(array: Int16Array, offset?: number): void; /** * Returns a section of an array. * @param start The beginning of the specified portion of the array. * @param end The end of the specified portion of the array. */ slice(start?: number, end?: number): Int16Array; /** * Determines whether the specified callback function returns true for any element of an array. * @param callbackfn A function that accepts up to three arguments. The some method calls the * callbackfn function for each element in array1 until the callbackfn returns true, or until * the end of the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ some(callbackfn: (value: number, index: number, array: Int16Array) => boolean, thisArg?: any): boolean; /** * Sorts an array. * @param compareFn The name of the function used to determine the order of the elements. If * omitted, the elements are sorted in ascending, ASCII character order. */ sort(compareFn?: (a: number, b: number) => number): Int16Array; /** * Gets a new Int16Array view of the ArrayBuffer store for this array, referencing the elements * at begin, inclusive, up to end, exclusive. * @param begin The index of the beginning of the array. * @param end The index of the end of the array. */ subarray(begin: number, end?: number): Int16Array; /** * Converts a number to a string by using the current locale. */ toLocaleString(): string; /** * Returns a string representation of an array. */ toString(): string; [index: number]: number; } interface Int16ArrayConstructor { prototype: Int16Array; new (length: number): Int16Array; new (array: Int16Array): Int16Array; new (array: number[]): Int16Array; new (buffer: ArrayBuffer, byteOffset?: number, length?: number): Int16Array; /** * The size in bytes of each element in the array. */ BYTES_PER_ELEMENT: number; /** * Returns a new array from a set of elements. * @param items A set of elements to include in the new array object. */ of(...items: number[]): Int16Array; } declare var Int16Array: Int16ArrayConstructor; /** * A typed array of 16-bit unsigned integer values. The contents are initialized to 0. If the * requested number of bytes could not be allocated an exception is raised. */ interface Uint16Array { /** * The size in bytes of each element in the array. */ BYTES_PER_ELEMENT: number; /** * The ArrayBuffer instance referenced by the array. */ buffer: ArrayBuffer; /** * The length in bytes of the array. */ byteLength: number; /** * The offset in bytes of the array. */ byteOffset: number; /** * Returns the this object after copying a section of the array identified by start and end * to the same array starting at position target * @param target If target is negative, it is treated as length+target where length is the * length of the array. * @param start If start is negative, it is treated as length+start. If end is negative, it * is treated as length+end. * @param end If not specified, length of the this object is used as its default value. */ copyWithin(target: number, start: number, end?: number): Uint16Array; /** * Determines whether all the members of an array satisfy the specified test. * @param callbackfn A function that accepts up to three arguments. The every method calls * the callbackfn function for each element in array1 until the callbackfn returns false, * or until the end of the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined is used as the this value. */ every(callbackfn: (value: number, index: number, array: Uint16Array) => boolean, thisArg?: any): boolean; /** * Returns the this object after filling the section identified by start and end with value * @param value value to fill array section with * @param start index to start filling the array at. If start is negative, it is treated as * length+start where length is the length of the array. * @param end index to stop filling the array at. If end is negative, it is treated as * length+end. */ fill(value: number, start?: number, end?: number): Uint16Array; /** * Returns the elements of an array that meet the condition specified in a callback function. * @param callbackfn A function that accepts up to three arguments. The filter method calls * the callbackfn function one time for each element in the array. * @param thisArg An object to which the this keyword can refer in the callbackfn function. * If thisArg is omitted, undefined