dbay

## Benchmarks   **Table of Contents** *generated with [DocToc](https://github.com/thlorenz/doctoc)* - [Takeaways](#takeaways) - [SQLite is Fast](#sqlite-is-fast) - [SQLite is Not Fast Except When It Is](#sqlite-is-not-fast-except-when-it-is) - [Top Runners](#top-runners) - [Midfield](#midfield) - [Also-Rans](#also-rans) - [To Do](#to-do)  ### Takeaways #### SQLite is Fast The (preliminary) benchmark results (see below; code found at [dbay/inserts.benchmarks](https://github.com/loveencounterflow/hengist/blob/master/dev/dbay/src/inserts.benchmarks.coffee). demonstrate that * **SQLite can do RDBMS stuff faster than some of its competitors** (notably: PostgreSQL); * this is no doubt helped by the in-process nature of SQLite as opposed to the server/client architecture of more traditional RDBMSes. * **You can get top speed out of SQLite under NodeJS using [`better-sqlite3`](https://github.com/JoshuaWise/better-sqlite3)**, provided that * SQLite is **configured correctly** (recommended to always use `pragma journal_mode = WAL`), and * **explicit transactions (below marked `*_tx`) are used** to bundle many small actions (here: SQL `insert`s) into atomic commits. #### SQLite is Not Fast Except When It Is There are, confusingly, several 'operational modes' to run SQLite: * **(1)** The **classical way** is of course to pass in a file system path that SQLite will use to open an existing or create a new database file. * **(2)** One can **open a DB situated on a RAM disk** (read: Linux `ramfs` or `tmpfs`; also **`sh`**ared **`m`**emory). **Opening a DB file on a RAM disk has many advantages** over using any of they ways listed under (3), below, since a RAM disk is just a file system, meaning the file can be accessed by all the usual means. * **(3)** Last but not least there are no less than *three* competing, *almost* equivalent ways to obtain an **in-memory DB**: * **(3.1)** One can pass in the special string [`':memory:'` to obtain a so-called *in-memory DB* (without 'shared cache')](https://www.sqlite.org/inmemorydb.html), * **(3.2)** or an empty string `''` that opens [a *temporary DB* (again without 'shared cache')](https://www.sqlite.org/inmemorydb.html#temp_db) (which is almost but not 100% the same thing as an in-memory DB). * **(3.3)** The third (and in theory preferable) way to open a DB that resides in RAM is using [a connection URL like with `file:xxx?mode=memory&cache=shared`](https://www.sqlite.org/sharedcache.html#inmemsharedcache) instead of a plain filename; since such an in-memory DB is identified via a name, several connections to the *same* in-memory DB may be made (albeit only from the same client process). * Having more than one connection to the same DB is necessary to enable user-defined functions (UDFs) to issue queries against the DB, but * the downside is that shared connections lacks feature-parity with [WAL mode](https://sqlite.org/wal.html) and that * [the 'shared connection' feature is not loved by the SQLite devs](https://sqlite.org/forum/info/871b9085849abd6e) (quoting drh: "It was a clever work-around [...] shared-cache is considered a mistake and a misfeature"). If the above litany is confusing for you that's because it is. Why *three* distinct, non-obvious ways to obtain an in-memory DB?—Other than "That's the accumulated results of over 20 years of development" there's probably no very good answer. However, after much experimenting, benchmarking and feture-testing, I feel confident to state that **you should probably forget about using SQLite in-memory DBs as outlined in point (3)**, above. The only exception to the rule would be when you wanted top performance (and who wouldn't), not worry about explicit transactions, do not need data durability (i.e. when the DB may become disposable on process exit), and do not plan on having to use more than a single connection (meaning you can not query data in that DB from within UDFs). In that case, feel free to pass in an empty string or `':memory:'` as path; but otherwise: **Always just use ordinary file system paths**. If you're on Linux, consider to use `/dev/shm` which is a read-to-use `tmpfs`, or use something like `sudo mount -t tmpfs -o size=512m none /mnt/ramdisk` to obtain a new RAM disk. On Linux systems that have a directory called `/dev/shm`, DBay will use that location to open DB files when no explicit `path` is passed in, and fall back to `/tmp` when `/dev/shm` is not found. You'll get to use [WAL mode](https://sqlite.org/wal.html) which is great because together with multiple connections it enables user-defined functions that can concurrently query rows from the same DB they deliver values to. What's more, benchmarks indicate that **what is slowing down work with an SQLite DB is not so much file system access *per se*, it's the implicit transactions that wrap each and every statement** in a pair of `begin transaction`, `commit` statements. **Curiously, slowdown-by-transaction is much more pronounced with RAM disks than SSDs**, as shown by the paltry `bsqlt_tmpfs 8.9%` result. I have no explanation for that performance cliff other than that maybe disk writes are better managed between hardware components and threads when using SSDs. ### Top Runners 80% — 100% ``` bsqlt_tmpfs_tx 45,595 Hz ≙ 1 ÷ 1.0 100.0 % │████████████▌│ dbay_tmpfs_prep_tx1 44,830 Hz ≙ 1 ÷ 1.0 98.3 % │████████████▎│ bsqlt_tmpfs_tx_jmwal 44,610 Hz ≙ 1 ÷ 1.0 97.8 % │████████████▎│ bsqlt_fle_tx 44,328 Hz ≙ 1 ÷ 1.0 97.2 % │████████████▏│ bsqlt_mem_tx 44,251 Hz ≙ 1 ÷ 1.0 97.1 % │████████████▏│ bsqlt_mem_tx_jmwal 43,679 Hz ≙ 1 ÷ 1.0 95.8 % │████████████ │ bsqlt_fle_tx_jmwal 43,182 Hz ≙ 1 ÷ 1.1 94.7 % │███████████▉ │ ``` ### Midfield 20% — 80% ``` bsqlt_mem_jmwal 35,612 Hz ≙ 1 ÷ 1.3 78.1 % │█████████▊ │ bsqlt_mem_thrds 35,412 Hz ≙ 1 ÷ 1.3 77.7 % │█████████▊ │ bsqlt_mem 35,132 Hz ≙ 1 ÷ 1.3 77.1 % │█████████▋ │ sqljs_tx 28,640 Hz ≙ 1 ÷ 1.6 62.8 % │███████▉ │ dbay_naive_tx1 25,099 Hz ≙ 1 ÷ 1.8 55.0 % │██████▉ │ bsqlt_tmpfs_qtforum2 20,979 Hz ≙ 1 ÷ 2.2 46.0 % │█████▊ │ bsqlt_fle_qtforum2 16,907 Hz ≙ 1 ÷ 2.7 37.1 % │████▋ │ bsqlt_tmpfs_jmwal 13,830 Hz ≙ 1 ÷ 3.3 30.3 % │███▊ │ pgmem 12,682 Hz ≙ 1 ÷ 3.6 27.8 % │███▌ │ bsqlt_fle_jmwal 11,670 Hz ≙ 1 ÷ 3.9 25.6 % │███▎ │ pgmem_tx 11,664 Hz ≙ 1 ÷ 3.9 25.6 % │███▎ │ ``` ### Also-Rans 0% — 20% ``` bsqlt_tmpfs 4,337 Hz ≙ 1 ÷ 10.5 9.5 % │█▎ │ dbay_naive_tx0 3,455 Hz ≙ 1 ÷ 13.2 7.6 % │█ │ sqljs 1,864 Hz ≙ 1 ÷ 24.5 4.1 % │▌ │ porsagerpostgres_tx 1,058 Hz ≙ 1 ÷ 43.1 2.3 % │▎ │ briancpg_tx 960 Hz ≙ 1 ÷ 47.5 2.1 % │▎ │ ``` ### To Do * **[–]** explain different benchmarks scenarios