bambu-cli/data/hms.json

Bambulabs CLI for printers

{
    "result": 0,
    "t": 1738095398,
    "ver": 202501221030,
    "data": {
        "device_hms": {
            "ver": 202501221030,
            "en": [
                {
                    "ecode": "0500010000030004",
                    "intro": "Not enough space in MicroSD Card; please clear some space."
                },
                {
                    "ecode": "0300020000010006",
                    "intro": "The nozzle temperature is abnormal; the sensor may have a short circuit. Please check whether the connector is properly plugged in."
                },
                {
                    "ecode": "0500030000010021",
                    "intro": "Hardware incompatible: please check the laser."
                },
                {
                    "ecode": "0500050000030002",
                    "intro": "The device is in the engineering state; please pay attention to the information security related matters."
                },
                {
                    "ecode": "030091000001000C",
                    "intro": "The chamber heater 1 has been working at full load for a long time. The temperature control system may have an issue."
                },
                {
                    "ecode": "030001000001000D",
                    "intro": "An issue occurred when heating the heatbed previously. To continue using your printer, please refer to the wiki to troubleshoot."
                },
                {
                    "ecode": "0500030000010024",
                    "intro": "The current temperature is too low. In order to protect you and your printer. Printing task, moving axis and other operations is disabled. Please move the printer to an environment above 10°C."
                },
                {
                    "ecode": "0700700000020005",
                    "intro": "Failed to feed the filament outside the AMS. Please clip the end of the filament flat and check to see if the spool is stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0702700000020004",
                    "intro": "Failed to pull back the filament from the toolhead to AMS. Possible cause: filament or spool stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0701700000020003",
                    "intro": "Failed to extrude the filament. Possible cause: extruder or nozzle clogged. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0703700000020006",
                    "intro": "Timeout purging old filament. Possible cause: filament stuck or extruder/nozzle clogged. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0702700000020003",
                    "intro": "Failed to extrude the filament. Possible cause: extruder or nozzle clogged. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0702700000020006",
                    "intro": "Timeout purging old filament. Possible cause: filament stuck or extruder/nozzle clogged. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0703700000020004",
                    "intro": "Failed to pull back the filament from the toolhead to AMS. Possible cause: filament or spool stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0703700000020005",
                    "intro": "Failed to feed the filament outside the AMS. Please clip the end of the filament flat and check to see if the spool is stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0702700000020002",
                    "intro": "Failed to feed the filament into the toolhead. Possible cause: filament or spool stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0701200000020006",
                    "intro": "PTFE tube detached during the feeding process. Please check if the PTFE tube is connected to the AMS and extruder."
                },
                {
                    "ecode": "0702200000020006",
                    "intro": "PTFE tube detached during the feeding process. Please check if the PTFE tube is connected to the AMS and extruder."
                },
                {
                    "ecode": "0700700000020002",
                    "intro": "Failed to feed filament into the toolhead. Possible cause: filament or spool stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0701700000020004",
                    "intro": "Failed to pull back the filament from the toolhead to AMS. Possible cause: filament or spool stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0701700000020002",
                    "intro": "Failed to feed the filament into the toolhead. Possible cause: filament or spool stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0700700000020006",
                    "intro": "Timeout purging old filament. Possible cause: filament stuck or extruder/nozzle clogged. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0702700000020005",
                    "intro": "Failed to feed the filament outside the AMS. Please clip the end of the filament flat and check to see if the spool is stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0703700000020003",
                    "intro": "Failed to extrude the filament. Possible cause: extruder or nozzle clogged. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0703200000020006",
                    "intro": "PTFE tube detached during the feeding process. Please check if the PTFE tube is connected to the AMS and extruder."
                },
                {
                    "ecode": "0703700000020002",
                    "intro": "Failed to feed the filament into the toolhead. Possible cause: filament or spool stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0700700000020004",
                    "intro": "Failed to pull back the filament from the toolhead to AMS. Possible cause: filament or spool stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0701700000020005",
                    "intro": "Failed to feed the filament outside the AMS. Please clip the end of the filament flat and check to see if the spool is stuck. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0700700000020003",
                    "intro": "Failed to extrude the filament. Possible cause: extruder or nozzle clogged. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0700200000020006",
                    "intro": "PTFE tube detached during the feeding process. Please check if the PTFE tube is connected to the AMS and extruder."
                },
                {
                    "ecode": "0701700000020006",
                    "intro": "Timeout purging old filament. Possible cause: filament stuck or extruder/nozzle clogged. Please refer to the Assistant for details."
                },
                {
                    "ecode": "0502050000010010",
                    "intro": "Uncertified AMS C detected or AMS C firmware not upgraded. Unable to operate with this printer."
                },
                {
                    "ecode": "0500050000010010",
                    "intro": "Uncertified AMS A detected or AMS A firmware not upgraded. Unable to operate with this printer."
                },
                {
                    "ecode": "0504050000010010",
                    "intro": "Uncertified AMS E detected or AMS E firmware not upgraded. Unable to operate with this printer."
                },
                {
                    "ecode": "0503050000010010",
                    "intro": "Uncertified AMS D detected or AMS D firmware not upgraded. Unable to operate with this printer."
                },
                {
                    "ecode": "0507050000010010",
                    "intro": "Uncertified AMS H detected or AMS H firmware not upgraded. Unable to operate with this printer."
                },
                {
                    "ecode": "0505050000010010",
                    "intro": "Uncertified AMS F detected or AMS F firmware not upgraded. Unable to operate with this printer."
                },
                {
                    "ecode": "0506050000010010",
                    "intro": "Uncertified AMS G detected or AMS G firmware not upgraded. Unable to operate with this printer."
                },
                {
                    "ecode": "0501050000010010",
                    "intro": "Uncertified AMS B detected or AMS B firmware not upgraded. Unable to operate with this printer."
                },
                {
                    "ecode": "03000D000001000C",
                    "intro": "The heatbed leveling data is abnormal. Please check whether there are any foreign objects on the heatbed and Z slider. If so, please remove them and try again."
                },
                {
                    "ecode": "050005000001000A",
                    "intro": ""
                },
                {
                    "ecode": "0500050000010007",
                    "intro": "MQTT command verification failed, please update the Studio or Handy."
                },
                {
                    "ecode": "050005000001000B",
                    "intro": ""
                },
                {
                    "ecode": "0500050000010009",
                    "intro": ""
                },
                {
                    "ecode": "0500050000010008",
                    "intro": ""
                },
                {
                    "ecode": "050005000001000C",
                    "intro": ""
                },
                {
                    "ecode": "07FF700000020003",
                    "intro": "The extruder filament is used up; please feed new filament."
                },
                {
                    "ecode": "1203210000020001",
                    "intro": "AMS D Slot2 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1200220000020001",
                    "intro": "AMS A Slot3 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1201220000020001",
                    "intro": "AMS B Slot3 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1202220000020001",
                    "intro": "AMS C Slot3 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1203220000020001",
                    "intro": "AMS D Slot3 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1200230000020001",
                    "intro": "AMS A Slot4 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1201230000020001",
                    "intro": "AMS B Slot4 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1202230000020001",
                    "intro": "AMS C Slot4 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1203230000020001",
                    "intro": "AMS D Slot4 filament has run out; please insert a new filament."
                },
                {
                    "ecode": "1200200000020002",
                    "intro": "AMS A Slot 1 is empty; please insert a new filament."
                },
                {
                    "ecode": "1201200000020002",
                    "intro": "AMS B Slot 1 is empty; please insert a new filament."
                },
                {
                    "ecode": "1202200000020002",
                    "intro": "AMS C Slot 1 is empty; please insert a new filament."
                },
                {
                    "ecode": "1203200000020002",
                    "intro": "AMS D Slot 1 is empty; please insert a new filament."
                },
                {
                    "ecode": "1200210000020002",
                    "intro": "AMS A Slot 2 is empty; please insert a new filament."
                },
                {
                    "ecode": "1201210000020002",
                    "intro": "AMS B Slot 2 is empty; please insert a new filament."
                },
                {
                    "ecode": "1202210000020002",
                    "intro": "AMS C Slot 2 is empty; please insert a new filament."
                },
                {
                    "ecode": "1203210000020002",
                    "intro": "AMS D Slot 2 is empty; please insert a new filament."
                },
                {
                    "ecode": "1200220000020002",
                    "intro": "AMS A Slot 3 is empty; please insert a new filament."
                },
                {
                    "ecode": "1201220000020002",
                    "intro": "AMS B Slot 3 is empty; please insert a new filament."
                },
                {
                    "ecode": "1202220000020002",
                    "intro": "AMS C Slot 3 is empty; please insert a new filament."
                },
                {
                    "ecode": "1203220000020002",
                    "intro": "AMS D Slot 3 is empty; please insert a new filament."
                },
                {
                    "ecode": "1200230000020002",
                    "intro": "AMS A Slot 4 is empty; please insert a new filament."
                },
                {
                    "ecode": "1201230000020002",
                    "intro": "AMS B Slot 4 is empty; please insert a new filament."
                },
                {
                    "ecode": "1202230000020002",
                    "intro": "AMS C Slot 4 is empty; please insert a new filament."
                },
                {
                    "ecode": "1203230000020002",
                    "intro": "AMS D Slot 4 is empty; please insert a new filament."
                },
                {
                    "ecode": "1200200000020003",
                    "intro": "AMS A Slot1 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1201200000020003",
                    "intro": "AMS B Slot1 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1202200000020003",
                    "intro": "AMS C Slot1 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1203200000020003",
                    "intro": "AMS D Slot1 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1200210000020003",
                    "intro": "AMS A Slot2 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1201210000020003",
                    "intro": "AMS B Slot2 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1202210000020003",
                    "intro": "AMS C Slot2 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1203210000020003",
                    "intro": "AMS D Slot2 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1200220000020003",
                    "intro": "AMS A Slot3 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1201220000020003",
                    "intro": "AMS B Slot3 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1202220000020003",
                    "intro": "AMS C Slot3 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1203220000020003",
                    "intro": "AMS D Slot3 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1200230000020003",
                    "intro": "AMS A Slot4 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1201230000020003",
                    "intro": "AMS B Slot4 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1202230000020003",
                    "intro": "AMS C Slot4 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1203230000020003",
                    "intro": "AMS D Slot4 filament may be broken in the PTFE tube."
                },
                {
                    "ecode": "1200200000020004",
                    "intro": "AMS A Slot1 filament may be broken in the tool head."
                },
                {
                    "ecode": "1201200000020004",
                    "intro": "AMS B Slot1 filament may be broken in the tool head."
                },
                {
                    "ecode": "1202200000020004",
                    "intro": "AMS C Slot1 filament may be broken in the tool head."
                },
                {
                    "ecode": "1203200000020004",
                    "intro": "AMS D Slot1 filament may be broken in the tool head."
                },
                {
                    "ecode": "1200210000020004",
                    "intro": "AMS A Slot2 filament may be broken in the tool head."
                },
                {
                    "ecode": "1201210000020004",
                    "intro": "AMS B Slot2 filament may be broken in the tool head."
                },
                {
                    "ecode": "1202210000020004",
                    "intro": "AMS C Slot2 filament may be broken in the tool head."
                },
                {
                    "ecode": "1203210000020004",
                    "intro": "AMS D Slot2 filament may be broken in the tool head."
                },
                {
                    "ecode": "1200220000020004",
                    "intro": "AMS A Slot3 filament may be broken in the tool head."
                },
                {
                    "ecode": "1201220000020004",
                    "intro": "AMS B Slot3 filament may be broken in the tool head."
                },
                {
                    "ecode": "1202220000020004",
                    "intro": "AMS C Slot3 filament may be broken in the tool head."
                },
                {
                    "ecode": "1203220000020004",
                    "intro": "AMS D Slot3 filament may be broken in the tool head."
                },
                {
                    "ecode": "1200230000020004",
                    "intro": "AMS A Slot4 filament may be broken in the tool head."
                },
                {
                    "ecode": "1201230000020004",
                    "intro": "AMS B Slot4 filament may be broken in the tool head."
                },
                {
                    "ecode": "1202230000020004",
                    "intro": "AMS C Slot4 filament may be broken in the tool head."
                },
                {
                    "ecode": "1203230000020004",
                    "intro": "AMS D Slot4 filament may be broken in the tool head."
                },
                {
                    "ecode": "1200200000020005",
                    "intro": "AMS A Slot1 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1201200000020005",
                    "intro": "AMS B Slot1 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1202200000020005",
                    "intro": "AMS C Slot1 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1203200000020005",
                    "intro": "AMS D Slot1 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1200210000020005",
                    "intro": "AMS A Slot2 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1201210000020005",
                    "intro": "AMS B Slot2 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1202210000020005",
                    "intro": "AMS C Slot2 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1203210000020005",
                    "intro": "AMS D Slot2 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1200220000020005",
                    "intro": "AMS A Slot3 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1201220000020005",
                    "intro": "AMS B Slot3 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1202220000020005",
                    "intro": "AMS C Slot3 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1203220000020005",
                    "intro": "AMS D Slot3 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1200230000020005",
                    "intro": "AMS A Slot4 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1201230000020005",
                    "intro": "AMS B Slot4 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1202230000020005",
                    "intro": "AMS C Slot4 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1203230000020005",
                    "intro": "AMS D Slot4 filament has run out, and purging the old filament went abnormally; please check to see if filament is stuck in the toolhead."
                },
                {
                    "ecode": "1200200000030001",
                    "intro": "AMS A Slot1 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1201200000030001",
                    "intro": "AMS B Slot1 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1202200000030001",
                    "intro": "AMS C Slot1 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1203200000030001",
                    "intro": "AMS D Slot1 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1200210000030001",
                    "intro": "AMS A Slot2 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1201210000030001",
                    "intro": "AMS B Slot2 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1202210000030001",
                    "intro": "AMS C Slot2 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1203210000030001",
                    "intro": "AMS D Slot2 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1200220000030001",
                    "intro": "AMS A Slot3 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1201220000030001",
                    "intro": "AMS B Slot3 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1202220000030001",
                    "intro": "AMS C Slot3 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1203220000030001",
                    "intro": "AMS D Slot3 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1200230000030001",
                    "intro": "AMS A Slot4 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1201230000030001",
                    "intro": "AMS B Slot4 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1202230000030001",
                    "intro": "AMS C Slot4 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1203230000030001",
                    "intro": "AMS D Slot4 filament has run out. Purging the old filament; please wait."
                },
                {
                    "ecode": "1200200000030002",
                    "intro": "AMS A Slot1 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1201200000030002",
                    "intro": "AMS B Slot1 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1202200000030002",
                    "intro": "AMS C Slot1 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1203200000030002",
                    "intro": "AMS D Slot1 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1200210000030002",
                    "intro": "AMS A Slot2 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1201210000030002",
                    "intro": "AMS B Slot2 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1202210000030002",
                    "intro": "AMS C Slot2 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1203210000030002",
                    "intro": "AMS D Slot2 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1200220000030002",
                    "intro": "AMS A Slot3 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1201220000030002",
                    "intro": "AMS B Slot3 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1202220000030002",
                    "intro": "AMS C Slot3 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1203220000030002",
                    "intro": "AMS D Slot3 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1200230000030002",
                    "intro": "AMS A Slot4 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1201230000030002",
                    "intro": "AMS B Slot4 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1202230000030002",
                    "intro": "AMS C Slot4 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1203230000030002",
                    "intro": "AMS D Slot4 filament has run out and automatically switched to the slot with the same filament."
                },
                {
                    "ecode": "1200300000010001",
                    "intro": "AMS A Slot 1 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1201300000010001",
                    "intro": "AMS B Slot 1 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1202300000010001",
                    "intro": "AMS C Slot 1 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1203300000010001",
                    "intro": "AMS D Slot 1 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1200310000010001",
                    "intro": "AMS A Slot 2 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1201310000010001",
                    "intro": "AMS B Slot 2 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1202310000010001",
                    "intro": "AMS C Slot 2 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1203310000010001",
                    "intro": "AMS D Slot 2 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1200320000010001",
                    "intro": "AMS A Slot 3 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1201320000010001",
                    "intro": "AMS B Slot 3 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1202320000010001",
                    "intro": "AMS C Slot 3 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1203320000010001",
                    "intro": "AMS D Slot 3 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1200330000010001",
                    "intro": "AMS A Slot 4 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1201330000010001",
                    "intro": "AMS B Slot 4 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1202330000010001",
                    "intro": "AMS C Slot 4 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1203330000010001",
                    "intro": "AMS D Slot 4 RFID coil is broken or the RF hardware circuit has an error."
                },
                {
                    "ecode": "1200300000020002",
                    "intro": "The RFID-tag on AMS A Slot 1 is damaged."
                },
                {
                    "ecode": "1201300000020002",
                    "intro": "The RFID-tag on AMS B Slot 1 is damaged."
                },
                {
                    "ecode": "1202300000020002",
                    "intro": "The RFID-tag on AMS C Slot 1 is damaged."
                },
                {
                    "ecode": "1203300000020002",
                    "intro": "The RFID-tag on AMS D Slot 1 is damaged."
                },
                {
                    "ecode": "1200310000020002",
                    "intro": "The RFID-tag on AMS A Slot 2 is damaged."
                },
                {
                    "ecode": "1201310000020002",
                    "intro": "The RFID-tag on AMS B Slot 2 is damaged."
                },
                {
                    "ecode": "1202310000020002",
                    "intro": "The RFID-tag on AMS C Slot 2 is damaged."
                },
                {
                    "ecode": "1203310000020002",
                    "intro": "The RFID-tag on AMS D Slot 2 is damaged."
                },
                {
                    "ecode": "1200320000020002",
                    "intro": "The RFID-tag on AMS A Slot 3 is damaged."
                },
                {
                    "ecode": "1201320000020002",
                    "intro": "The RFID-tag on AMS B Slot 3 is damaged."
                },
                {
                    "ecode": "1202320000020002",
                    "intro": "The RFID-tag on AMS C Slot 3 is damaged."
                },
                {
                    "ecode": "1203320000020002",
                    "intro": "The RFID-tag on AMS D Slot 3 is damaged."
                },
                {
                    "ecode": "1200330000020002",
                    "intro": "The RFID-tag on AMS A Slot 4 is damaged."
                },
                {
                    "ecode": "1201330000020002",
                    "intro": "The RFID-tag on AMS B Slot 4 is damaged."
                },
                {
                    "ecode": "1202330000020002",
                    "intro": "The RFID-tag on AMS C Slot 4 is damaged."
                },
                {
                    "ecode": "1203330000020002",
                    "intro": "The RFID-tag on AMS D Slot 4 is damaged."
                },
                {
                    "ecode": "1200300000030003",
                    "intro": "AMS A Slot1 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1201300000030003",
                    "intro": "AMS B Slot1 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1202300000030003",
                    "intro": "AMS C Slot1 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1203300000030003",
                    "intro": "AMS D Slot1 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1200310000030003",
                    "intro": "AMS A Slot2 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1201310000030003",
                    "intro": "AMS B Slot2 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1202310000030003",
                    "intro": "AMS C Slot2 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1203310000030003",
                    "intro": "AMS D Slot2 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1200320000030003",
                    "intro": "AMS A Slot3 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1201320000030003",
                    "intro": "AMS B Slot3 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1202320000030003",
                    "intro": "AMS C Slot3 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1203320000030003",
                    "intro": "AMS D Slot3 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1200330000030003",
                    "intro": "AMS A Slot4 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1201330000030003",
                    "intro": "AMS B Slot4 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1202330000030003",
                    "intro": "AMS C Slot4 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1203330000030003",
                    "intro": "AMS D Slot4 RFID cannot be read because of a structural error."
                },
                {
                    "ecode": "1200300000010004",
                    "intro": "RFID cannot be read because of an encryption chip failure in AMSA."
                },
                {
                    "ecode": "1201300000010004",
                    "intro": "RFID cannot be read because of an encryption chip failure in AMSB."
                },
                {
                    "ecode": "1202300000010004",
                    "intro": "RFID cannot be read because of an encryption chip failure in AMSC."
                },
                {
                    "ecode": "1203300000010004",
                    "intro": "RFID cannot be read because of an encryption chip failure in AMSD."
                },
                {
                    "ecode": "1200500000020001",
                    "intro": "AMS A communication is abnormal; please check the connection cable."
                },
                {
                    "ecode": "1201500000020001",
                    "intro": "AMS B communication is abnormal; please check the connection cable."
                },
                {
                    "ecode": "1202500000020001",
                    "intro": "AMS C communication is abnormal; please check the connection cable."
                },
                {
                    "ecode": "1203500000020001",
                    "intro": "AMS D communication is abnormal; please check the connection cable."
                },
                {
                    "ecode": "1200700000010001",
                    "intro": "AMS A Filament speed and length error: The slot 1 filament odometry may be faulty."
                },
                {
                    "ecode": "1201700000010001",
                    "intro": "AMS B Filament speed and length error: The slot 1 filament odometry may be faulty."
                },
                {
                    "ecode": "1202700000010001",
                    "intro": "AMS C Filament speed and length error: The slot 1 filament odometry may be faulty."
                },
                {
                    "ecode": "1203700000010001",
                    "intro": "AMS D Filament speed and length error: The slot 1 filament odometry may be faulty."
                },
                {
                    "ecode": "1200710000010001",
                    "intro": "AMS A Filament speed and length error: The slot 2 filament odometry may be faulty."
                },
                {
                    "ecode": "1201710000010001",
                    "intro": "AMS B Filament speed and length error: The slot 2 filament odometry may be faulty."
                },
                {
                    "ecode": "1202710000010001",
                    "intro": "AMS C Filament speed and length error: The slot 2 filament odometry may be faulty."
                },
                {
                    "ecode": "1203710000010001",
                    "intro": "AMS D Filament speed and length error: The slot 2 filament odometry may be faulty."
                },
                {
                    "ecode": "1200720000010001",
                    "intro": "AMS A Filament speed and length error: The slot 3 filament odometry may be faulty."
                },
                {
                    "ecode": "1201720000010001",
                    "intro": "AMS B Filament speed and length error: The slot 3 filament odometry may be faulty."
                },
                {
                    "ecode": "1202720000010001",
                    "intro": "AMS C Filament speed and length error: The slot 3 filament odometry may be faulty."
                },
                {
                    "ecode": "1203720000010001",
                    "intro": "AMS D Filament speed and length error: The slot 3 filament odometry may be faulty."
                },
                {
                    "ecode": "1200730000010001",
                    "intro": "AMS A Filament speed and length error: The slot 4 filament odometry may be faulty."
                },
                {
                    "ecode": "1201730000010001",
                    "intro": "AMS B Filament speed and length error: The slot 4 filament odometry may be faulty."
                },
                {
                    "ecode": "1202730000010001",
                    "intro": "AMS C Filament speed and length error: The slot 4 filament odometry may be faulty."
                },
                {
                    "ecode": "1203730000010001",
                    "intro": "AMS D Filament speed and length error: The slot 4 filament odometry may be faulty."
                },
                {
                    "ecode": "0500040000020010",
                    "intro": "The RFID-tag on AMS A Slot1 cannot be identified."
                },
                {
                    "ecode": "0500040000020011",
                    "intro": "The RFID-tag on AMS A Slot2 cannot be identified."
                },
                {
                    "ecode": "0500040000020012",
                    "intro": "The RFID-tag on AMS A Slot3 cannot be identified."
                },
                {
                    "ecode": "0500040000020014",
                    "intro": "The RFID-tag on AMS B Slot1 cannot be identified."
                },
                {
                    "ecode": "0500040000020015",
                    "intro": "The RFID-tag on AMS B Slot2 cannot be identified."
                },
                {
                    "ecode": "0500040000020016",
                    "intro": "The RFID-tag on AMS B Slot3 cannot be identified."
                },
                {
                    "ecode": "0500040000020017",
                    "intro": "The RFID-tag on AMS B Slot4 cannot be identified."
                },
                {
                    "ecode": "0500040000020018",
                    "intro": "The RFID-tag on AMS C Slot1 cannot be identified."
                },
                {
                    "ecode": "0500040000020019",
                    "intro": "The RFID-tag on AMS C Slot2 cannot be identified."
                },
                {
                    "ecode": "050004000002001A",
                    "intro": "The RFID-tag on AMS C Slot3 cannot be identified."
                },
                {
                    "ecode": "050004000002001B",
                    "intro": "The RFID-tag on AMS C Slot4 cannot be identified."
                },
                {
                    "ecode": "050004000002001C",
                    "intro": "The RFID-tag on AMS D Slot1 cannot be identified."
                },
                {
                    "ecode": "050004000002001D",
                    "intro": "The RFID-tag on AMS D Slot2 cannot be identified."
                },
                {
                    "ecode": "050004000002001E",
                    "intro": "The RFID-tag on AMS D Slot3 cannot be identified."
                },
                {
                    "ecode": "050004000002001F",
                    "intro": "The RFID-tag on AMS D Slot4 cannot be identified."
                },
                {
                    "ecode": "0500040000020013",
                    "intro": "The RFID-tag on AMS A Slot4 cannot be identified."
                },
                {
                    "ecode": "1200800000020001",
                    "intro": "AMS A Slot1 filament may be tangled or stuck."
                },
                {
                    "ecode": "1200810000020001",
                    "intro": "AMS A Slot2 filament may be tangled or stuck."
                },
                {
                    "ecode": "1200820000020001",
                    "intro": "AMS A Slot3 filament may be tangled or stuck."
                },
                {
                    "ecode": "1200830000020001",
                    "intro": "AMS A Slot4 filament may be tangled or stuck."
                },
                {
                    "ecode": "1201800000020001",
                    "intro": "AMS B Slot1 filament may be tangled or stuck."
                },
                {
                    "ecode": "1201810000020001",
                    "intro": "AMS B Slot2 filament may be tangled or stuck."
                },
                {
                    "ecode": "1201820000020001",
                    "intro": "AMS B Slot3 filament may be tangled or stuck."
                },
                {
                    "ecode": "1201830000020001",
                    "intro": "AMS B Slot4 filament may be tangled or stuck."
                },
                {
                    "ecode": "1202800000020001",
                    "intro": "AMS C Slot1 filament may be tangled or stuck."
                },
                {
                    "ecode": "1202810000020001",
                    "intro": "AMS C Slot2 filament may be tangled or stuck."
                },
                {
                    "ecode": "1202820000020001",
                    "intro": "AMS C Slot3 filament may be tangled or stuck."
                },
                {
                    "ecode": "1202830000020001",
                    "intro": "AMS C Slot4 filament may be tangled or stuck."
                },
                {
                    "ecode": "1203800000020001",
                    "intro": "AMS D Slot1 filament may be tangled or stuck."
                },
                {
                    "ecode": "1203810000020001",
                    "intro": "AMS D Slot2 filament may be tangled or stuck."
                },
                {
                    "ecode": "1203820000020001",
                    "intro": "AMS D Slot3 filament may be tangled or stuck."
                },
                {
                    "ecode": "1203830000020001",
                    "intro": "AMS D Slot4 filament may be tangled or stuck."
                },
                {
                    "ecode": "0300940000030001",
                    "intro": "Chamber cooling may be too slow. You can open the front door or top cover to help cooling if the air in chamber is non-toxic."
                },
                {
                    "ecode": "1200200000020006",
                    "intro": "Failed to extrude AMS A Slot1 filament; the extruder may be clogged or the filament may be too thin, causing the extruder to slip."
                },
                {
                    "