aws-sdk

import {Request} from '../lib/request'; import {Response} from '../lib/response'; import {AWSError} from '../lib/error'; import {Service} from '../lib/service'; import {ServiceConfigurationOptions} from '../lib/service'; import {ConfigBase as Config} from '../lib/config-base'; interface Blob {} declare class SecurityHub extends Service { /** * Constructs a service object. This object has one method for each API operation. */ constructor(options?: SecurityHub.Types.ClientConfiguration) config: Config & SecurityHub.Types.ClientConfiguration; /** * Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from. This operation is only used by member accounts that are not added through Organizations. When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account. */ acceptAdministratorInvitation(params: SecurityHub.Types.AcceptAdministratorInvitationRequest, callback?: (err: AWSError, data: SecurityHub.Types.AcceptAdministratorInvitationResponse) => void): Request<SecurityHub.Types.AcceptAdministratorInvitationResponse, AWSError>; /** * Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from. This operation is only used by member accounts that are not added through Organizations. When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account. */ acceptAdministratorInvitation(callback?: (err: AWSError, data: SecurityHub.Types.AcceptAdministratorInvitationResponse) => void): Request<SecurityHub.Types.AcceptAdministratorInvitationResponse, AWSError>; /** * This method is deprecated. Instead, use AcceptAdministratorInvitation. The Security Hub console continues to use AcceptInvitation. It will eventually change to use AcceptAdministratorInvitation. Any IAM policies that specifically control access to this function must continue to use AcceptInvitation. You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation. Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from. This operation is only used by member accounts that are not added through Organizations. When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account. */ acceptInvitation(params: SecurityHub.Types.AcceptInvitationRequest, callback?: (err: AWSError, data: SecurityHub.Types.AcceptInvitationResponse) => void): Request<SecurityHub.Types.AcceptInvitationResponse, AWSError>; /** * This method is deprecated. Instead, use AcceptAdministratorInvitation. The Security Hub console continues to use AcceptInvitation. It will eventually change to use AcceptAdministratorInvitation. Any IAM policies that specifically control access to this function must continue to use AcceptInvitation. You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation. Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from. This operation is only used by member accounts that are not added through Organizations. When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account. */ acceptInvitation(callback?: (err: AWSError, data: SecurityHub.Types.AcceptInvitationResponse) => void): Request<SecurityHub.Types.AcceptInvitationResponse, AWSError>; /** * Deletes one or more automation rules. */ batchDeleteAutomationRules(params: SecurityHub.Types.BatchDeleteAutomationRulesRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchDeleteAutomationRulesResponse) => void): Request<SecurityHub.Types.BatchDeleteAutomationRulesResponse, AWSError>; /** * Deletes one or more automation rules. */ batchDeleteAutomationRules(callback?: (err: AWSError, data: SecurityHub.Types.BatchDeleteAutomationRulesResponse) => void): Request<SecurityHub.Types.BatchDeleteAutomationRulesResponse, AWSError>; /** * Disables the standards specified by the provided StandardsSubscriptionArns. For more information, see Security Standards section of the Security Hub User Guide. */ batchDisableStandards(params: SecurityHub.Types.BatchDisableStandardsRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchDisableStandardsResponse) => void): Request<SecurityHub.Types.BatchDisableStandardsResponse, AWSError>; /** * Disables the standards specified by the provided StandardsSubscriptionArns. For more information, see Security Standards section of the Security Hub User Guide. */ batchDisableStandards(callback?: (err: AWSError, data: SecurityHub.Types.BatchDisableStandardsResponse) => void): Request<SecurityHub.Types.BatchDisableStandardsResponse, AWSError>; /** * Enables the standards specified by the provided StandardsArn. To obtain the ARN for a standard, use the DescribeStandards operation. For more information, see the Security Standards section of the Security Hub User Guide. */ batchEnableStandards(params: SecurityHub.Types.BatchEnableStandardsRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchEnableStandardsResponse) => void): Request<SecurityHub.Types.BatchEnableStandardsResponse, AWSError>; /** * Enables the standards specified by the provided StandardsArn. To obtain the ARN for a standard, use the DescribeStandards operation. For more information, see the Security Standards section of the Security Hub User Guide. */ batchEnableStandards(callback?: (err: AWSError, data: SecurityHub.Types.BatchEnableStandardsResponse) => void): Request<SecurityHub.Types.BatchEnableStandardsResponse, AWSError>; /** * Retrieves a list of details for automation rules based on rule Amazon Resource Names (ARNs). */ batchGetAutomationRules(params: SecurityHub.Types.BatchGetAutomationRulesRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchGetAutomationRulesResponse) => void): Request<SecurityHub.Types.BatchGetAutomationRulesResponse, AWSError>; /** * Retrieves a list of details for automation rules based on rule Amazon Resource Names (ARNs). */ batchGetAutomationRules(callback?: (err: AWSError, data: SecurityHub.Types.BatchGetAutomationRulesResponse) => void): Request<SecurityHub.Types.BatchGetAutomationRulesResponse, AWSError>; /** * Returns associations between an Security Hub configuration and a batch of target accounts, organizational units, or the root. Only the Security Hub delegated administrator can invoke this operation from the home Region. A configuration can refer to a configuration policy or to a self-managed configuration. */ batchGetConfigurationPolicyAssociations(params: SecurityHub.Types.BatchGetConfigurationPolicyAssociationsRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchGetConfigurationPolicyAssociationsResponse) => void): Request<SecurityHub.Types.BatchGetConfigurationPolicyAssociationsResponse, AWSError>; /** * Returns associations between an Security Hub configuration and a batch of target accounts, organizational units, or the root. Only the Security Hub delegated administrator can invoke this operation from the home Region. A configuration can refer to a configuration policy or to a self-managed configuration. */ batchGetConfigurationPolicyAssociations(callback?: (err: AWSError, data: SecurityHub.Types.BatchGetConfigurationPolicyAssociationsResponse) => void): Request<SecurityHub.Types.BatchGetConfigurationPolicyAssociationsResponse, AWSError>; /** * Provides details about a batch of security controls for the current Amazon Web Services account and Amazon Web Services Region. */ batchGetSecurityControls(params: SecurityHub.Types.BatchGetSecurityControlsRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchGetSecurityControlsResponse) => void): Request<SecurityHub.Types.BatchGetSecurityControlsResponse, AWSError>; /** * Provides details about a batch of security controls for the current Amazon Web Services account and Amazon Web Services Region. */ batchGetSecurityControls(callback?: (err: AWSError, data: SecurityHub.Types.BatchGetSecurityControlsResponse) => void): Request<SecurityHub.Types.BatchGetSecurityControlsResponse, AWSError>; /** * For a batch of security controls and standards, identifies whether each control is currently enabled or disabled in a standard. */ batchGetStandardsControlAssociations(params: SecurityHub.Types.BatchGetStandardsControlAssociationsRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchGetStandardsControlAssociationsResponse) => void): Request<SecurityHub.Types.BatchGetStandardsControlAssociationsResponse, AWSError>; /** * For a batch of security controls and standards, identifies whether each control is currently enabled or disabled in a standard. */ batchGetStandardsControlAssociations(callback?: (err: AWSError, data: SecurityHub.Types.BatchGetStandardsControlAssociationsResponse) => void): Request<SecurityHub.Types.BatchGetStandardsControlAssociationsResponse, AWSError>; /** * Imports security findings generated by a finding provider into Security Hub. This action is requested by the finding provider to import its findings into Security Hub. BatchImportFindings must be called by one of the following: The Amazon Web Services account that is associated with a finding if you are using the default product ARN or are a partner sending findings from within a customer's Amazon Web Services account. In these cases, the identifier of the account that you are calling BatchImportFindings from needs to be the same as the AwsAccountId attribute for the finding. An Amazon Web Services account that Security Hub has allow-listed for an official partner integration. In this case, you can call BatchImportFindings from the allow-listed account and send findings from different customer accounts in the same batch. The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb. After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow. Note UserDefinedFields VerificationState Workflow Finding providers also should not use BatchImportFindings to update the following attributes. Confidence Criticality RelatedFindings Severity Types Instead, finding providers use FindingProviderFields to provide values for these attributes. */ batchImportFindings(params: SecurityHub.Types.BatchImportFindingsRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchImportFindingsResponse) => void): Request<SecurityHub.Types.BatchImportFindingsResponse, AWSError>; /** * Imports security findings generated by a finding provider into Security Hub. This action is requested by the finding provider to import its findings into Security Hub. BatchImportFindings must be called by one of the following: The Amazon Web Services account that is associated with a finding if you are using the default product ARN or are a partner sending findings from within a customer's Amazon Web Services account. In these cases, the identifier of the account that you are calling BatchImportFindings from needs to be the same as the AwsAccountId attribute for the finding. An Amazon Web Services account that Security Hub has allow-listed for an official partner integration. In this case, you can call BatchImportFindings from the allow-listed account and send findings from different customer accounts in the same batch. The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb. After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow. Note UserDefinedFields VerificationState Workflow Finding providers also should not use BatchImportFindings to update the following attributes. Confidence Criticality RelatedFindings Severity Types Instead, finding providers use FindingProviderFields to provide values for these attributes. */ batchImportFindings(callback?: (err: AWSError, data: SecurityHub.Types.BatchImportFindingsResponse) => void): Request<SecurityHub.Types.BatchImportFindingsResponse, AWSError>; /** * Updates one or more automation rules based on rule Amazon Resource Names (ARNs) and input parameters. */ batchUpdateAutomationRules(params: SecurityHub.Types.BatchUpdateAutomationRulesRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchUpdateAutomationRulesResponse) => void): Request<SecurityHub.Types.BatchUpdateAutomationRulesResponse, AWSError>; /** * Updates one or more automation rules based on rule Amazon Resource Names (ARNs) and input parameters. */ batchUpdateAutomationRules(callback?: (err: AWSError, data: SecurityHub.Types.BatchUpdateAutomationRulesResponse) => void): Request<SecurityHub.Types.BatchUpdateAutomationRulesResponse, AWSError>; /** * Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account. Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding. Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects. Confidence Criticality Note RelatedFindings Severity Types UserDefinedFields VerificationState Workflow You can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide. */ batchUpdateFindings(params: SecurityHub.Types.BatchUpdateFindingsRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchUpdateFindingsResponse) => void): Request<SecurityHub.Types.BatchUpdateFindingsResponse, AWSError>; /** * Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account. Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding. Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects. Confidence Criticality Note RelatedFindings Severity Types UserDefinedFields VerificationState Workflow You can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide. */ batchUpdateFindings(callback?: (err: AWSError, data: SecurityHub.Types.BatchUpdateFindingsResponse) => void): Request<SecurityHub.Types.BatchUpdateFindingsResponse, AWSError>; /** * For a batch of security controls and standards, this operation updates the enablement status of a control in a standard. */ batchUpdateStandardsControlAssociations(params: SecurityHub.Types.BatchUpdateStandardsControlAssociationsRequest, callback?: (err: AWSError, data: SecurityHub.Types.BatchUpdateStandardsControlAssociationsResponse) => void): Request<SecurityHub.Types.BatchUpdateStandardsControlAssociationsResponse, AWSError>; /** * For a batch of security controls and standards, this operation updates the enablement status of a control in a standard. */ batchUpdateStandardsControlAssociations(callback?: (err: AWSError, data: SecurityHub.Types.BatchUpdateStandardsControlAssociationsResponse) => void): Request<SecurityHub.Types.BatchUpdateStandardsControlAssociationsResponse, AWSError>; /** * Creates a custom action target in Security Hub. You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events. */ createActionTarget(params: SecurityHub.Types.CreateActionTargetRequest, callback?: (err: AWSError, data: SecurityHub.Types.CreateActionTargetResponse) => void): Request<SecurityHub.Types.CreateActionTargetResponse, AWSError>; /** * Creates a custom action target in Security Hub. You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events. */ createActionTarget(callback?: (err: AWSError, data: SecurityHub.Types.CreateActionTargetResponse) => void): Request<SecurityHub.Types.CreateActionTargetResponse, AWSError>; /** * Creates an automation rule based on input parameters. */ createAutomationRule(params: SecurityHub.Types.CreateAutomationRuleRequest, callback?: (err: AWSError, data: SecurityHub.Types.CreateAutomationRuleResponse) => void): Request<SecurityHub.Types.CreateAutomationRuleResponse, AWSError>; /** * Creates an automation rule based on input parameters. */ createAutomationRule(callback?: (err: AWSError, data: SecurityHub.Types.CreateAutomationRuleResponse) => void): Request<SecurityHub.Types.CreateAutomationRuleResponse, AWSError>; /** * Creates a configuration policy with the defined configuration. Only the Security Hub delegated administrator can invoke this operation from the home Region. */ createConfigurationPolicy(params: SecurityHub.Types.CreateConfigurationPolicyRequest, callback?: (err: AWSError, data: SecurityHub.Types.CreateConfigurationPolicyResponse) => void): Request<SecurityHub.Types.CreateConfigurationPolicyResponse, AWSError>; /** * Creates a configuration policy with the defined configuration. Only the Security Hub delegated administrator can invoke this operation from the home Region. */ createConfigurationPolicy(callback?: (err: AWSError, data: SecurityHub.Types.CreateConfigurationPolicyResponse) => void): Request<SecurityHub.Types.CreateConfigurationPolicyResponse, AWSError>; /** * Used to enable finding aggregation. Must be called from the aggregation Region. For more details about cross-Region replication, see Configuring finding aggregation in the Security Hub User Guide. */ createFindingAggregator(params: SecurityHub.Types.CreateFindingAggregatorRequest, callback?: (err: AWSError, data: SecurityHub.Types.CreateFindingAggregatorResponse) => void): Request<SecurityHub.Types.CreateFindingAggregatorResponse, AWSError>; /** * Used to enable finding aggregation. Must be called from the aggregation Region. For more details about cross-Region replication, see Configuring finding aggregation in the Security Hub User Guide. */ createFindingAggregator(callback?: (err: AWSError, data: SecurityHub.Types.CreateFindingAggregatorResponse) => void): Request<SecurityHub.Types.CreateFindingAggregatorResponse, AWSError>; /** * Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation. To group the related findings in the insight, use the GroupByAttribute. */ createInsight(params: SecurityHub.Types.CreateInsightRequest, callback?: (err: AWSError, data: SecurityHub.Types.CreateInsightResponse) => void): Request<SecurityHub.Types.CreateInsightResponse, AWSError>; /** * Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation. To group the related findings in the insight, use the GroupByAttribute. */ createInsight(callback?: (err: AWSError, data: SecurityHub.Types.CreateInsightResponse) => void): Request<SecurityHub.Types.CreateInsightResponse, AWSError>; /** * Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account. CreateMembers is always used to add accounts that are not organization members. For accounts that are managed using Organizations, CreateMembers is only used in the following cases: Security Hub is not configured to automatically add new organization accounts. The account was disassociated or deleted in Security Hub. This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation. For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub. Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub. If the organization account does not have Security Hub enabled, then Security Hub and the default standards are automatically enabled. Note that Security Hub cannot be enabled automatically for the organization management account. The organization management account must enable Security Hub before the administrator account enables it as a member account. For organization accounts that already have Security Hub enabled, Security Hub does not make any other changes to those accounts. It does not change their enabled standards or controls. A permissions policy is added that permits the administrator account to view the findings generated in the member account. To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation. */ createMembers(params: SecurityHub.Types.CreateMembersRequest, callback?: (err: AWSError, data: SecurityHub.Types.CreateMembersResponse) => void): Request<SecurityHub.Types.CreateMembersResponse, AWSError>; /** * Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account. CreateMembers is always used to add accounts that are not organization members. For accounts that are managed using Organizations, CreateMembers is only used in the following cases: Security Hub is not configured to automatically add new organization accounts. The account was disassociated or deleted in Security Hub. This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation. For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub. Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub. If the organization account does not have Security Hub enabled, then Security Hub and the default standards are automatically enabled. Note that Security Hub cannot be enabled automatically for the organization management account. The organization management account must enable Security Hub before the administrator account enables it as a member account. For organization accounts that already have Security Hub enabled, Security Hub does not make any other changes to those accounts. It does not change their enabled standards or controls. A permissions policy is added that permits the administrator account to view the findings generated in the member account. To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation. */ createMembers(callback?: (err: AWSError, data: SecurityHub.Types.CreateMembersResponse) => void): Request<SecurityHub.Types.CreateMembersResponse, AWSError>; /** * Declines invitations to become a member account. A prospective member account uses this operation to decline an invitation to become a member. This operation is only called by member accounts that aren't part of an organization. Organization accounts don't receive invitations. */ declineInvitations(params: SecurityHub.Types.DeclineInvitationsRequest, callback?: (err: AWSError, data: SecurityHub.Types.DeclineInvitationsResponse) => void): Request<SecurityHub.Types.DeclineInvitationsResponse, AWSError>; /** * Declines invitations to become a member account. A prospective member account uses this operation to decline an invitation to become a member. This operation is only called by member accounts that aren't part of an organization. Organization accounts don't receive invitations. */ declineInvitations(callback?: (err: AWSError, data: SecurityHub.Types.DeclineInvitationsResponse) => void): Request<SecurityHub.Types.DeclineInvitationsResponse, AWSError>; /** * Deletes a custom action target from Security Hub. Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action. */ deleteActionTarget(params: SecurityHub.Types.DeleteActionTargetRequest, callback?: (err: AWSError, data: SecurityHub.Types.DeleteActionTargetResponse) => void): Request<SecurityHub.Types.DeleteActionTargetResponse, AWSError>; /** * Deletes a custom action target from Security Hub. Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action. */ deleteActionTarget(callback?: (err: AWSError, data: SecurityHub.Types.DeleteActionTargetResponse) => void): Request<SecurityHub.Types.DeleteActionTargetResponse, AWSError>; /** * Deletes a configuration policy. Only the Security Hub delegated administrator can invoke this operation from the home Region. For the deletion to succeed, you must first disassociate a configuration policy from target accounts, organizational units, or the root by invoking the StartConfigurationPolicyDisassociation operation. */ deleteConfigurationPolicy(params: SecurityHub.Types.DeleteConfigurationPolicyRequest, callback?: (err: AWSError, data: SecurityHub.Types.DeleteConfigurationPolicyResponse) => void): Request<SecurityHub.Types.DeleteConfigurationPolicyResponse, AWSError>; /** * Deletes a configuration policy. Only the Security Hub delegated administrator can invoke this operation from the home Region. For the deletion to succeed, you must first disassociate a configuration policy from target accounts, organizational units, or the root by invoking the StartConfigurationPolicyDisassociation operation. */ deleteConfigurationPolicy(callback?: (err: AWSError, data: SecurityHub.Types.DeleteConfigurationPolicyResponse) => void): Request<SecurityHub.Types.DeleteConfigurationPolicyResponse, AWSError>; /** * Deletes a finding aggregator. When you delete the finding aggregator, you stop finding aggregation. When you stop finding aggregation, findings that were already aggregated to the aggregation Region are still visible from the aggregation Region. New findings and finding updates are not aggregated. */ deleteFindingAggregator(params: SecurityHub.Types.DeleteFindingAggregatorRequest, callback?: (err: AWSError, data: SecurityHub.Types.DeleteFindingAggregatorResponse) => void): Request<SecurityHub.Types.DeleteFindingAggregatorResponse, AWSError>; /** * Deletes a finding aggregator. When you delete the finding aggregator, you stop finding aggregation. When you stop finding aggregation, findings that were already aggregated to the aggregation Region are still visible from the aggregation Region. New findings and finding updates are not aggregated. */ deleteFindingAggregator(callback?: (err: AWSError, data: SecurityHub.Types.DeleteFindingAggregatorResponse) => void): Request<SecurityHub.Types.DeleteFindingAggregatorResponse, AWSError>; /** * Deletes the insight specified by the InsightArn. */ deleteInsight(params: SecurityHub.Types.DeleteInsightRequest, callback?: (err: AWSError, data: SecurityHub.Types.DeleteInsightResponse) => void): Request<SecurityHub.Types.DeleteInsightResponse, AWSError>; /** * Deletes the insight specified by the InsightArn. */ deleteInsight(callback?: (err: AWSError, data: SecurityHub.Types.DeleteInsightResponse) => void): Request<SecurityHub.Types.DeleteInsightResponse, AWSError>; /** * Deletes invitations received by the Amazon Web Services account to become a member account. A Security Hub administrator account can use this operation to delete invitations sent to one or more member accounts. This operation is only used to delete invitations that are sent to member accounts that aren't part of an organization. Organization accounts don't receive invitations. */ deleteInvitations(params: SecurityHub.Types.DeleteInvitationsRequest, callback?: (err: AWSError, data: SecurityHub.Types.DeleteInvitationsResponse) => void): Request<SecurityHub.Types.DeleteInvitationsResponse, AWSError>; /** * Deletes invitations received by the Amazon Web Services account to become a member account. A Security Hub administrator account can use this operation to delete invitations sent to one or more member accounts. This operation is only used to delete invitations that are sent to member accounts that aren't part of an organization. Organization accounts don't receive invitations. */ deleteInvitations(callback?: (err: AWSError, data: SecurityHub.Types.DeleteInvitationsResponse) => void): Request<SecurityHub.Types.DeleteInvitationsResponse, AWSError>; /** * Deletes the specified member accounts from Security Hub. You can invoke this API only to delete accounts that became members through invitation. You can't invoke this API to delete accounts that belong to an Organizations organization. */ deleteMembers(params: SecurityHub.Types.DeleteMembersRequest, callback?: (err: AWSError, data: SecurityHub.Types.DeleteMembersResponse) => void): Request<SecurityHub.Types.DeleteMembersResponse, AWSError>; /** * Deletes the specified member accounts from Security Hub. You can invoke this API only to delete accounts that became members through invitation. You can't invoke this API to delete accounts that belong to an Organizations organization. */ deleteMembers(callback?: (err: AWSError, data: SecurityHub.Types.DeleteMembersResponse) => void): Request<SecurityHub.Types.DeleteMembersResponse, AWSError>; /** * Returns a list of the custom action targets in Security Hub in your account. */ describeActionTargets(params: SecurityHub.Types.DescribeActionTargetsRequest, callback?: (err: AWSError, data: SecurityHub.Types.DescribeActionTargetsResponse) => void): Request<SecurityHub.Types.DescribeActionTargetsResponse, AWSError>; /** * Returns a list of the custom action targets in Security Hub in your account. */ describeActionTargets(callback?: (err: AWSError, data: SecurityHub.Types.DescribeActionTargetsResponse) => void): Request<SecurityHub.Types.DescribeActionTargetsResponse, AWSError>; /** * Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub. */ describeHub(params: SecurityHub.Types.DescribeHubRequest, callback?: (err: AWSError, data: SecurityHub.Types.DescribeHubResponse) => void): Request<SecurityHub.Types.DescribeHubResponse, AWSError>; /** * Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub. */ describeHub(callback?: (err: AWSError, data: SecurityHub.Types.DescribeHubResponse) => void): Request<SecurityHub.Types.DescribeHubResponse, AWSError>; /** * Returns information about the way your organization is configured in Security Hub. Only the Security Hub administrator account can invoke this operation. */ describeOrganizationConfiguration(params: SecurityHub.Types.DescribeOrganizationConfigurationRequest, callback?: (err: AWSError, data: SecurityHub.Types.DescribeOrganizationConfigurationResponse) => void): Request<SecurityHub.Types.DescribeOrganizationConfigurationResponse, AWSError>; /** * Returns information about the way your organization is configured in Security Hub. Only the Security Hub administrator account can invoke this operation. */ describeOrganizationConfiguration(callback?: (err: AWSError, data: SecurityHub.Types.DescribeOrganizationConfigurationResponse) => void): Request<SecurityHub.Types.DescribeOrganizationConfigurationResponse, AWSError>; /** * Returns information about product integrations in Security Hub. You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration. If you do not provide an integration ARN, then the results include all of the available product integrations. */ describeProducts(params: SecurityHub.Types.DescribeProductsRequest, callback?: (err: AWSError, data: SecurityHub.Types.DescribeProductsResponse) => void): Request<SecurityHub.Types.DescribeProductsResponse, AWSError>; /** * Returns information about product integrations in Security Hub. You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration. If you do not provide an integration ARN, then the results include all of the available product integrations. */ describeProducts(callback?: (err: AWSError, data: SecurityHub.Types.DescribeProductsResponse) => void): Request<SecurityHub.Types.DescribeProductsResponse, AWSError>; /** * Returns a list of the available standards in Security Hub. For each standard, the results include the standard ARN, the name, and a description. */ describeStandards(params: SecurityHub.Types.DescribeStandardsRequest, callback?: (err: AWSError, data: SecurityHub.Types.DescribeStandardsResponse) => void): Request<SecurityHub.Types.DescribeStandardsResponse, AWSError>; /** * Returns a list of the available standards in Security Hub. For each standard, the results include the standard ARN, the name, and a description. */ describeStandards(callback?: (err: AWSError, data: SecurityHub.Types.DescribeStandardsResponse) => void): Request<SecurityHub.Types.DescribeStandardsResponse, AWSError>; /** * Returns a list of security standards controls. For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information. */ describeStandardsControls(params: SecurityHub.Types.DescribeStandardsControlsRequest, callback?: (err: AWSError, data: SecurityHub.Types.DescribeStandardsControlsResponse) => void): Request<SecurityHub.Types.DescribeStandardsControlsResponse, AWSError>; /** * Returns a list of security standards controls. For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information. */ describeStandardsControls(callback?: (err: AWSError, data: SecurityHub.Types.DescribeStandardsControlsResponse) => void): Request<SecurityHub.Types.DescribeStandardsControlsResponse, AWSError>; /** * Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub. */ disableImportFindingsForProduct(params: SecurityHub.Types.DisableImportFindingsForProductRequest, callback?: (err: AWSError, data: SecurityHub.Types.DisableImportFindingsForProductResponse) => void): Request<SecurityHub.Types.DisableImportFindingsForProductResponse, AWSError>; /** * Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub. */ disableImportFindingsForProduct(callback?: (err: AWSError, data: SecurityHub.Types.DisableImportFindingsForProductResponse) => void): Request<SecurityHub.Types.DisableImportFindingsForProductResponse, AWSError>; /** * Disables a Security Hub administrator account. Can only be called by the organization management account. */ disableOrganizationAdminAccount(params: SecurityHub.Types.DisableOrganizationAdminAccountRequest, callback?: (err: AWSError, data: SecurityHub.Types.DisableOrganizationAdminAccountResponse) => void): Request<SecurityHub.Types.DisableOrganizationAdminAccountResponse, AWSError>; /** * Disables a Security Hub administrator account. Can only be called by the organization management account. */ disableOrganizationAdminAccount(callback?: (err: AWSError, data: SecurityHub.Types.DisableOrganizationAdminAccountResponse) => void): Request<SecurityHub.Types.DisableOrganizationAdminAccountResponse, AWSError>; /** * Disables Security Hub in your account only in the current Amazon Web Services Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub. You can't disable Security Hub in an account that is currently the Security Hub administrator. When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed. If you want to save your existing findings, you must export them before you disable Security Hub. */ disableSecurityHub(params: SecurityHub.Types.DisableSecurityHubRequest, callback?: (err: AWSError, data: SecurityHub.Types.DisableSecurityHubResponse) => void): Request<SecurityHub.Types.DisableSecurityHubResponse, AWSError>; /** * Disables Security Hub in your account only in the current Amazon Web Services Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub. You can't disable Security Hub in an account that is currently the Security Hub administrator. When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed. If you want to save your existing findings, you must export them before you disable Security Hub. */ disableSecurityHub(callback?: (err: AWSError, data: SecurityHub.Types.DisableSecurityHubResponse) => void): Request<SecurityHub.Types.DisableSecurityHubResponse, AWSError>; /** * Disassociates the current Security Hub member account from the associated administrator account. This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account. */ disassociateFromAdministratorAccount(params: SecurityHub.Types.DisassociateFromAdministratorAccountRequest, callback?: (err: AWSError, data: SecurityHub.Types.DisassociateFromAdministratorAccountResponse) => void): Request<SecurityHub.Types.DisassociateFromAdministratorAccountResponse, AWSError>; /** * Disassociates the current Security Hub member account from the associated administrator account. This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account. */ disassociateFromAdministratorAccount(callback?: (err: AWSError, data: SecurityHub.Types.DisassociateFromAdministratorAccountResponse) => void): Request<SecurityHub.Types.DisassociateFromAdministratorAccountResponse, AWSError>; /** * This method is deprecated. Instead, use DisassociateFromAdministratorAccount. The Security Hub console continues to use DisassociateFromMasterAccount. It will eventually change to use DisassociateFromAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount. You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount. Disassociates the current Security Hub member account from the associated administrator account. This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account. */ disassociateFromMasterAccount(params: SecurityHub.Types.DisassociateFromMasterAccountRequest, callback?: (err: AWSError, data: SecurityHub.Types.DisassociateFromMasterAccountResponse) => void): Request<SecurityHub.Types.DisassociateFromMasterAccountResponse, AWSError>; /** * This method is deprecated. Instead, use DisassociateFromAdministratorAccount. The Security Hub console continues to use DisassociateFromMasterAccount. It will eventually change to use DisassociateFromAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount. You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount. Disassociates the current Security Hub member account from the associated administrator account. This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account. */ disassociateFromMasterAccount(callback?: (err: AWSError, data: SecurityHub.Types.DisassociateFromMasterAccountResponse) => void): Request<SecurityHub.Types.DisassociateFromMasterAccountResponse, AWSError>; /** * Disassociates the specified member accounts from the associated administrator account. Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually. */ disassociateMembers(params: SecurityHub.Types.DisassociateMembersRequest, callback?: (err: AWSError, data: SecurityHub.Types.DisassociateMembersResponse) => void): Request<SecurityHub.Types.DisassociateMembersResponse, AWSError>; /** * Disassociates the specified member accounts from the associated administrator account. Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually. */ disassociateMembers(callback?: (err: AWSError, data: SecurityHub.Types.DisassociateMembersResponse) => void): Request<SecurityHub.Types.DisassociateMembersResponse, AWSError>; /** * Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub. When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied. */ enableImportFindingsForProduct(params: SecurityHub.Types.EnableImportFindingsForProductRequest, callback?: (err: AWSError, data: SecurityHub.Types.EnableImportFindingsForProductResponse) => void): Request<SecurityHub.Types.EnableImportFindingsForProductResponse, AWSError>; /** * Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub. When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied. */ enableImportFindingsForProduct(callback?: (err: AWSError, data: SecurityHub.Types.EnableImportFindingsForProductResponse) => void): Request<SecurityHub.Types.EnableImportFindingsForProductResponse, AWSError>; /** * Designates the Security Hub administrator account for an organization. Can only be called by the organization management account. */ enableOrganizationAdminAccount(params: SecurityHub.Types.EnableOrganizationAdminAccountRequest, callback?: (err: AWSError, data: SecurityHub.Types.EnableOrganizationAdminAccountResponse) => void): Request<SecurityHub.Types.EnableOrganizationAdminAccountResponse, AWSError>; /** * Designates the Security Hub administrator account for an organization. Can only be called by the organization management account. */ enableOrganizationAdminAccount(callback?: (err: AWSError, data: SecurityHub.Types.EnableOrganizationAdminAccountResponse) => void): Request<SecurityHub.Types.EnableOrganizationAdminAccountResponse, AWSError>; /** * Enables Security Hub for your account in the current Region or the Region you specify in the request. When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub. When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards: Center for Internet Security (CIS) Amazon Web Services Foundations Benchmark v1.2.0 Amazon Web Services Foundational Security Best Practices Other standards are not automatically enabled. To opt out of automatically enabled standards, set EnableDefaultStandards to false. After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation. To learn more, see the setup information in the Security Hub User Guide. */ enableSecurityHub(params: SecurityHub.Types.EnableSecurityHubRequest, callback?: (err: AWSError, data: SecurityHub.Types.EnableSecurityHubResponse) => void): Request<SecurityHub.Types.EnableSecurityHubResponse, AWSError>; /** * Enables Security Hub for your account in the current Region or the Region you specify in the request. When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub. When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards: Center for Internet Security (CIS) Amazon Web Services Foundations Benchmark v1.2.0 Amazon Web Services Foundational Security Best Practices Other standards are not automatically enabled. To opt out of automatically enabled standards, set EnableDefaultStandards to false. After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation. To learn more, see the setup information in the Security Hub User Guide. */ enableSecurityHub(callback?: (err: AWSError, data: SecurityHub.Types.EnableSecurityHubResponse) => void): Request<SecurityHub.Types.EnableSecurityHubResponse, AWSError>; /** * Provides the details for the Security Hub administrator account for the current member account. Can be used by both member accounts that are managed using Organizations and accounts that were invited manually. */ getAdministratorAccount(params: SecurityHub.Types.GetAdministratorAccountRequest, callback?: (err: AWSError, data: SecurityHub.Types.GetAdministratorAccountResponse) => void): Request<SecurityHub.Types.GetAdministratorAccountResponse, AWSError>; /** * Provides the details for the Security Hub administrator account for the current member account. Can be used by both member accounts that are managed using Organizations and accounts that were invited manually. */ getAdministratorAccount(callback?: (err: AWSError, data: SecurityHub.Types.GetAdministratorAccountResponse) => void): Request<SecurityHub.Types.GetAdministratorAccountResponse, AWSError>; /** * Provides information about a configuration policy. Only the Security Hub delegated administrator can invoke this operation from the home Region. */ getConfigurationPolicy(params: SecurityHub.Types.GetConfigurationPolicyRequest, callback?: (err: AWSError, data: SecurityHub.Types.GetConfigurationPolicyResponse) => void): Request<SecurityHub.Types.GetConfigurationPolicyResponse, AWSError>; /** * Provides information about a configuration policy. Only the Security Hub delegated administrator can invoke this operation from the home Region. */ getConfigurationPolicy(callback?: (err: AWSError, data: SecurityHub.Types.GetConfigurationPolicyResponse) => void): Request<SecurityHub.Types.GetConfigurationPolicyResponse, AWSError>; /** * Returns the association between a configuration and a target account, organizational unit, or the root. The configuration can be a configuration policy or self-managed behavior. Only the Security Hub delegated administrator can invoke this operation from the home Region. */ getConfigurationPolicyAssociation(params: SecurityHub.Types.GetConfigurationPolicyAssociationRequest, callback?: (err: AWSError, data: SecurityHub.Types.GetCon