aws-cdk-lib/aws-elasticloadbalancingv2-targets/lib/ip-target.d.ts

Version 2 of the AWS Cloud Development Kit library

import * as elbv2 from '../../aws-elasticloadbalancingv2';
/**
 * An IP address that is a target for load balancing.
 *
 * Specify IP addresses from the subnets of the virtual private cloud (VPC) for
 * the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and
 * 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify
 * publicly routable IP addresses.
 *
 * If you register a target of this type, you are responsible for making
 * sure the load balancer's security group can send packets to the IP address.
 */
export declare class IpTarget implements elbv2.IApplicationLoadBalancerTarget, elbv2.INetworkLoadBalancerTarget {
    private readonly ipAddress;
    private readonly port?;
    private readonly availabilityZone?;
    /**
     * Create a new IPAddress target
     *
     * The availabilityZone parameter determines whether the target receives
     * traffic from the load balancer nodes in the specified Availability Zone
     * or from all enabled Availability Zones for the load balancer.
     *
     * This parameter is not supported if the target type of the target group
     * is instance. If the IP address is in a subnet of the VPC for the target
     * group, the Availability Zone is automatically detected and this
     * parameter is optional. If the IP address is outside the VPC, this
     * parameter is required.
     *
     * With an Application Load Balancer, if the IP address is outside the VPC
     * for the target group, the only supported value is all.
     *
     * Default is automatic.
     *
     * @param ipAddress The IP Address to load balance to
     * @param port Override the group's default port
     * @param availabilityZone Availability zone to send traffic from
     */
    constructor(ipAddress: string, port?: number | undefined, availabilityZone?: string | undefined);
    /**
     * Register this instance target with a load balancer
     *
     * Don't call this, it is called automatically when you add the target to a
     * load balancer.
     */
    attachToApplicationTargetGroup(targetGroup: elbv2.IApplicationTargetGroup): elbv2.LoadBalancerTargetProps;
    /**
     * Register this instance target with a load balancer
     *
     * Don't call this, it is called automatically when you add the target to a
     * load balancer.
     */
    attachToNetworkTargetGroup(targetGroup: elbv2.INetworkTargetGroup): elbv2.LoadBalancerTargetProps;
    private attach;
}