arch-wiki-md-repo/wiki/_content/english/SiS.md

All arch-wiki articles in markdown format, updated every two days.

This page describes how to get [Silicon Integrated Systems (SiS)](http://dri.freedesktop.org/wiki/SiS) chipset graphical adapters working on Arch Linux:

## Contents

*   [1 Packages](#Packages)
*   [2 lspci](#lspci)
*   [3 Modules](#Modules)
*   [4 xorg.conf](#xorg.conf)
    *   [4.1 Enable SSE](#Enable_SSE)
    *   [4.2 SiS 671 card](#SiS_671_card)
    *   [4.3 Dual head configuration](#Dual_head_configuration)

## Packages

**Note:** Driver is only working on [linux-lts](https://www.archlinux.org/packages/?name=linux-lts) with iomem=relaxed [kernel parameter](/index.php/Kernel_parameter "Kernel parameter")

You will need main [xf86-video-sis](https://aur.archlinux.org/packages/xf86-video-sis/) with driver and it's good idea to install [sisctrl](https://aur.archlinux.org/packages/sisctrl/) (gui tool for setting video modes). Some cards not supported by **sis** driver package can work with [xf86-video-sisusb](https://www.archlinux.org/packages/?name=xf86-video-sisusb) and [xf86-video-sisimedia](https://aur.archlinux.org/packages/xf86-video-sisimedia/).

## lspci

Output of lspci should look like this (depends on present model):

```
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter

```

## Modules

There are couple of [kernel modules](/index.php/Kernel_modules "Kernel modules") related to SiS video cards:

```
$ lsmod | grep sis | sed -re 's#^([a-zA-Z0-9_-]*) *.*#\1#g' | xargs modinfo | grep 'filename:'
...
filename:       /usr/lib/modules/*kernel-version*/kernel/drivers/char/agp/sis-agp.ko.gz
filename:       /usr/lib/modules/*kernel-version*/kernel/drivers/char/agp/agpgart.ko.gz
...

```

where `*kernel-version*` is the kernel version currently installed on your system. For example kernel 3.7.1.1

You will probably need to load only the *sis-agp* [kernel module](/index.php/Kernel_module "Kernel module").

## xorg.conf

Here are few most important sections from /etc/X11/xorg.conf

1.  Load some modules:

```
Section "Module"
  Load  "dbe"
  Load  "i2c"
  Load  "bitmap"
  Load  "ddc"
  Load  "dri"
  Load  "extmod"
  Load  "freetype"
  Load  "glx"
  Load  "int10"
  Load  "vbe"
EndSection

```

1.  Device specification:

```
Section "Device"
  Identifier "Card0"
  Driver "sis"
  Card        "** SiS (generic)     [sis]"
  BusID "PCI:1:0:0"

  Option "UseFBDev" "true"
  Option "EnableSisCtrl" "yes"
  Option "ForceCRT1Type" "LCD"
  Option "ForceCRT2Type" "NONE"
  #Option "CRT2Detection" "true" #For me this worked better than forceing the detection. If you use this comment out the two Force lines above this.
  Option "CRT1Gamma" "on"
  Option "CRT2Gamma" "on"
  Option "Brightness" "0.000 0.000 0.000"
  Option "Contrast" "0.000 0.000 0.000"
  Option "CRT1Saturation" "0"
  Option "XvOnCRT2" "yes"
  Option "XvDefaultContrast" "2"
  Option "XvDefaultBrightness" "10"
  Option "XvDefaultHue" "0"
  Option "XvDefaultSaturation" "0"
  Option "XvDefaultDisableGfxLR" "no"
  Option "XvGamma" "off"
EndSection

```

1.  Enable Direct Rendering:

```
Section "DRI"
  Mode         0666
EndSection

```

#### Enable SSE

enable or force the SSE use in SiS Card

Add

```
 Option "UseSSE" "yes"

```

to `Device` section

#### SiS 671 card

Add

```
 Option "UseTiming1366" "yes"

```

to `Device` section.

### Dual head configuration

You need 2 device sections to enable dualhead mode. Sis specific options should be placed into master head device section.

```
Section "Monitor"
  Identifier   "CRT1"
  ModelName    "PANEL"
  Option       "DPMS"
  VendorName   "LCD"
  HorizSync    31-60
  VertRefresh  40-60
EndSection

Section "Monitor"
  Identifier   "CRT2"
  ModelName    "tv"
  Option       "DPMS"
  VendorName   "tv"
EndSection

Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      24
    Modes      "1024x768".
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "CRT2"
EndSection

Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      24
    Modes      "1024x768".
  EndSubSection
  Device       "Device[1]"
  Identifier   "Screen[1]"
  Monitor      "CRT1"
EndSection

Section "Device"
  BoardName    "630"
  BusID        "PCI:1:0:0"
  Driver       "sis"
  Identifier   "Device[1]"
  Screen       1
  VendorName   "SiS"
EndSection

Section "Device"
  BoardName    "630"
  BusID        "PCI:1:0:0"
  Driver       "sis"
  Identifier   "Device[0]"
  Screen       0
  VendorName   "SiS"
  Option "EnableSisCtrl" "true"
EndSection

Section "ServerLayout"
  Identifier   "Layout[dual]"
  ...
  Option       "Clone" "off"
  Screen       "Screen[0]"
  Screen       "Screen[1]" RightOf "Screen[0]"
  Option       "Xinerama" "off"
EndSection

```