arch-wiki-md-repo
Version:
All arch-wiki articles in markdown format, updated every two days.
53 lines (32 loc) • 2.06 kB
Markdown
## Contents
* [1 Installation](#Installation)
* [2 Configuration](#Configuration)
* [2.1 Backlight](#Backlight)
* [2.2 Fn Keys](#Fn_Keys)
* [2.3 Suspend](#Suspend)
* [2.4 Video Drivers](#Video_Drivers)
* [3 Issues](#Issues)
* [3.1 DisplayPort Extenders](#DisplayPort_Extenders)
* [3.2 USB](#USB)
## Installation
Use the [Installation](/index.php/Installation "Installation") guide.
## Configuration
### Backlight
The following kernel options are needed for [ACPI/Backlight](/index.php/Backlight#Kernel_command-line_options "Backlight"):
```
acpi_osi=Linux acpi_backlight=vendor video.use_native_backlight=1
```
### Fn Keys
Function/Fn keys do not work without the FnLock on. To enable the FnLock, press `Fn+Esc`. The green light on the `Fn` key should turn on. Now you can use the `Fn` key like normal (*i.e.*, with FnLock on `Fn+F1` would equate to a `XF86AudioMute` to be handled by X/WM/whathaveyou).
### Suspend
Add the following kernel parameter in order to combat freeze/panic after suspend-to-ram:
```
i915.enable_rc6=0
```
### Video Drivers
Follow [Intel graphics](/index.php/Intel_graphics "Intel graphics") for installing the GPU driver. The T550 suffers from [Intel graphics#Loss of horizontal sync when switching TTYs](/index.php/Intel_graphics#Loss_of_horizontal_sync_when_switching_TTYs "Intel graphics"), but changing the [Graphics Acceleration to UXA](/index.php/Intel_graphics#SNA_issues "Intel graphics") fixes it.
## Issues
### DisplayPort Extenders
The T550 is only able to drive three displays at once. If you are using a one-to-three DisplayPort adapter, you will need to disable the laptop display (`xrandr --output eDP1 --off`) in order to use three external displays. Expect a heavy delay (1-2 seconds) while adjusting displays via DisplayPort with `xrandr`.
### USB
Enabling "Always-On USB" in the BIOS seems to make the forward-most USB port on the right side of the laptop (the 'Charging Port') unusable in Linux - disabling this feature in BIOS re-enables the port.