arch-wiki-md-repo/wiki/_content/english/HP Pavilion g6-2103ax.md

All arch-wiki articles in markdown format, updated every two days.

(This is a work-in-progress. I recently bought one of these laptops, and this article will attempt to explain what I did to dual-boot Arch with the HP Factory installed Windows 7.)

## Contents

*   [1 Hardware](#Hardware)
*   [2 Notes about factory settings](#Notes_about_factory_settings)
*   [3 Dual booting with Arch](#Dual_booting_with_Arch)
    *   [3.1 Configuring Windows](#Configuring_Windows)
    *   [3.2 Partitioning](#Partitioning)
    *   [3.3 Install](#Install)
    *   [3.4 Notes on configuration](#Notes_on_configuration)
*   [4 Arch-only install](#Arch-only_install)

## Hardware

The g6-2103ax is a 2012 model 15.6” laptop, with the AMD A6 processor and a dedicated graphics card.

	CPU

	AMD A6-4400M APU with Radeon graphics

	2.7 GHz, 1 MiB second-level cache

	GPU

	Internal: AMD Radeon HD 7520G, 800Mhz, 512MB

	Dedicated: AMD Radeon HD 7670M, 800Mhz, 512MB

	Memory

	4 GiB DDR3, 1600 MHz

	Display

	15.6” LED

	Multimedia

	HP CDDVDW SN-208BB CD/DVD writer

	Sound: ???

	Networking

	Wireless: Atheros AR9485 wireless adaptor

	Ethernet: Realtek RTL8101E/RTL8102E PCI Express fast ethernet controller

	Storage

	Seagate ST500LM012 HN0M5, 500GB (465GiB)

	Factory partitions are SYSTEM, WINDOWS C, HP_RECOVERY, and HP_TOOLS

	External ports

	3× USB-3

	SD card reader

	1× HDMI

	1× VGA-compatible

## Notes about factory settings

The factory install comes with Windows 7 Professional, set up to occupy the majority of the hard drive, with three other utility partitions. As the disk is formatted with the MBR partitioning style, it is impossible to create space to dual boot another operating system without removing one of these utility partitions first. The hardware is UEFI-enabled, but HP uses some BIOS/UEFI trickery to make the system boot in BIOS mode. At present, this cannot be changed, and I couldn’t get any UEFI bootloaders to boot at all.

*   The `SYSTEM` contains files essential for Windows to boot. Altering this partition **will** render Windows unbootable.
*   The `HP_RECOVERY` partition contains a factory reset program that will restore the computer to its initial state. HP no longer provide disks for this purpose, but they can be ordered or made using the HP Recovery utilities preinstalled.
*   The `HP_TOOLS` partition contains some system diagnostic tools by HP. These are EFI applications only accessible at pre-boot time by hitting `Esc` before the bootloader starts.

**Note:** HP is rather vague on whether modifying the partitions voids the warranty. I was able to request recovery disks under warranty after messing up the partition table, but they may not repair a damaged computer sent in unless it was in the factory state.

## Dual booting with Arch

These are the steps I followed to dual-boot Arch and Windows 7\.

### Configuring Windows

If you wish to create the Windows recovery disks, use the HP Recovery Tools to build these.

**Warning:** These disks will reset the computer to its initial factory state, wiping **all** data on the hard drive.

The HP Recovery Tools program includes an option to delete the recovery partition. Though they don’t recommend this, it’s safe to perform and is the only way to make room for Arch that will allow a painless dual-boot.

Use the Windows disk management tools to shrink `C:` drive to the desired size. If the tool refuses to shrink beyond so-called immovable files, it can be coerced by temporarily disabling the Page File and removing Windows Restore Points.

**Warning:** Using third-party tools to resize the Windows partition may render Windows unbootable.

Once you’ve created the desired amount of free space, boot the Arch ISO installer. Select the 64-bit install, and `Tab` to modify the kernel boot parameters. **Always** append `radeon.modeset=0` to disable [KMS](/index.php/KMS "KMS"), or you’ll be left with a blank screen, as neither the [open-source drivers](/index.php/ATI "ATI") or the [ATI Catalyst](/index.php/ATI_Catalyst "ATI Catalyst") drivers support KMS on this laptop (at present).

### Partitioning

When [partitioning](/index.php/Partitioning "Partitioning"), make sure to align partitions properly for optimum performance. Do not modify the `SYSTEM`, Windows, or `HP_TOOLS` partitions; instead, create an extended partition filling up all of the free space left by shrinking `C:\` drive. That way you can have a separate `/boot` partition. I used [LVM](/index.php/LVM "LVM") to contain the rest of my partitions, and did not bother with encryption using [LUKS](/index.php/LUKS "LUKS").

### Install

Install Arch as per [the official guide](/index.php/Installation_guide "Installation guide").

### Notes on configuration

I couldn’t get the system to boot using the [open-source drivers](/index.php/ATI "ATI"), and I’ve had no issues with the latest [ATI Catalyst](/index.php/ATI_Catalyst "ATI Catalyst") driver. You will need to append `nomodeset` and `vga=0` to your kernel options in your bootloader configs, otherwise the console will be dark, and resuming from suspend may not work properly. I haven’t been able to get suspend-to-disk (hibernate) to work, as it just reports an error from **fglrx**, so your mileage in that regard may vary.

## Arch-only install

If you want to remove Windows 7 and opt for a pure Arch install, I’d recommend retaining the `HP_TOOLS` partition as it provides options for installing BIOS updates, as well as thorough hardware tests.