aes70/src/types/OcaPositionDescriptor.d.ts

A controller library for the AES70 protocol.

/*
 * This file has been generated.
 */
import {
  IOcaPositionCoordinateSystem,
  OcaPositionCoordinateSystem,
} from './OcaPositionCoordinateSystem';
import { IOcaPositionDescriptorFieldFlags } from './OcaPositionDescriptorFieldFlags';

export declare interface IOcaPositionDescriptor {
  /**
   * Type of position coordinate system - see AES70-1, section 5.5.9.
   * @type OcaPositionCoordinateSystem
   */
  CoordinateSystem: IOcaPositionCoordinateSystem;

  /**
   * Which fields of the Values[] array contain valid values.
   * @type IOcaPositionDescriptorFieldFlags
   */
  FieldFlags: IOcaPositionDescriptorFieldFlags;

  /**
   * The coordinates
   * @type number[]
   */
  Values: number[];
}

export declare class OcaPositionDescriptor implements IOcaPositionDescriptor {
  /**
   * A six-axis c1,c2,c3,c4,c5,c6) coordinate. For mechanical systems, these
   * axes shall be interpreted as follows:
   *
   *  - c1 = X; axial (fore-and-aft) position
   *
   *  - c2 = Y; lateral (side-to-side) position
   *
   *  - c3 = Z; vertical position
   *
   *  - c4 = rX; rotation around the X-axis, also known as *Roll*
   *
   *  - c5 = rY; rotation around the Y-axis, also known as *Pitch*
   *
   *  - c6 = rZ; rotation around the Z-axis. also known as *Yaw*
   *
   *
   * Rotation angles are measured according to the *right-hand rule:* if the
   * right hand "holds" an axis with the thumb pointing in the direction of
   * ascending coordinate values, then the fingers point in the direction of
   * ascending angle values. For GPS systems, these axes shall be interpreted as
   * follows:
   *
   *  - c1 = longitude
   *
   *  - c2 = latitude
   *
   *  - c3 = altitude
   *
   *  - c4 : not used
   *
   *  - c5 : not used
   *
   *  - c6 : not used
   *
   *
   * @class OcaPositionDescriptor
   */
  constructor(
    CoordinateSystem: OcaPositionCoordinateSystem,
    FieldFlags: IOcaPositionDescriptorFieldFlags,
    Values: number[]
  );

  /**
   * Type of position coordinate system - see AES70-1, section 5.5.9.
   * @type OcaPositionCoordinateSystem
   */
  CoordinateSystem: OcaPositionCoordinateSystem;

  /**
   * Which fields of the Values[] array contain valid values.
   * @type IOcaPositionDescriptorFieldFlags
   */
  FieldFlags: IOcaPositionDescriptorFieldFlags;

  /**
   * The coordinates
   * @type number[]
   */
  Values: number[];
}