@tokamak-network/thanos-contracts
Version:
98 lines • 79.4 kB
JSON
{
"language": "Solidity",
"sources": {
"contracts/GovernanceToken.sol": {
"content": "// SPDX-License-Identifier: MIT\npragma solidity 0.8.12;\n\nimport \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/extensions/ERC20Votes.sol\";\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\n\n/**\n * @dev The Optimism token used in governance and supporting voting and delegation.\n * Implements EIP 2612 allowing signed approvals.\n * Contract is \"owned\" by a `MintManager` instance with permission to the `mint` function only,\n * for the purposes of enforcing the token inflation schedule.\n */\ncontract GovernanceToken is ERC20Burnable, ERC20Votes, Ownable {\n /**\n * @dev Constructor.\n */\n constructor() ERC20(\"Optimism\", \"OP\") ERC20Permit(\"Optimism\") {}\n\n function mint(address _account, uint256 _amount) public onlyOwner {\n _mint(_account, _amount);\n }\n\n // The following functions are overrides required by Solidity.\n function _afterTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal override(ERC20, ERC20Votes) {\n super._afterTokenTransfer(from, to, amount);\n }\n\n function _mint(address to, uint256 amount) internal override(ERC20, ERC20Votes) {\n super._mint(to, amount);\n }\n\n function _burn(address account, uint256 amount) internal override(ERC20, ERC20Votes) {\n super._burn(account, amount);\n }\n}\n"
},
"@openzeppelin/contracts/token/ERC20/ERC20.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC20.sol\";\nimport \"./extensions/IERC20Metadata.sol\";\nimport \"../../utils/Context.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n * For a generic mechanism see {ERC20PresetMinterPauser}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC20\n * applications.\n *\n * Additionally, an {Approval} event is emitted on calls to {transferFrom}.\n * This allows applications to reconstruct the allowance for all accounts just\n * by listening to said events. Other implementations of the EIP may not emit\n * these events, as it isn't required by the specification.\n *\n * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}\n * functions have been added to mitigate the well-known issues around setting\n * allowances. See {IERC20-approve}.\n */\ncontract ERC20 is Context, IERC20, IERC20Metadata {\n mapping(address => uint256) private _balances;\n\n mapping(address => mapping(address => uint256)) private _allowances;\n\n uint256 private _totalSupply;\n\n string private _name;\n string private _symbol;\n\n /**\n * @dev Sets the values for {name} and {symbol}.\n *\n * The default value of {decimals} is 18. To select a different value for\n * {decimals} you should overload it.\n *\n * All two of these values are immutable: they can only be set once during\n * construction.\n */\n constructor(string memory name_, string memory symbol_) {\n _name = name_;\n _symbol = symbol_;\n }\n\n /**\n * @dev Returns the name of the token.\n */\n function name() public view virtual override returns (string memory) {\n return _name;\n }\n\n /**\n * @dev Returns the symbol of the token, usually a shorter version of the\n * name.\n */\n function symbol() public view virtual override returns (string memory) {\n return _symbol;\n }\n\n /**\n * @dev Returns the number of decimals used to get its user representation.\n * For example, if `decimals` equals `2`, a balance of `505` tokens should\n * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n *\n * Tokens usually opt for a value of 18, imitating the relationship between\n * Ether and Wei. This is the value {ERC20} uses, unless this function is\n * overridden;\n *\n * NOTE: This information is only used for _display_ purposes: it in\n * no way affects any of the arithmetic of the contract, including\n * {IERC20-balanceOf} and {IERC20-transfer}.\n */\n function decimals() public view virtual override returns (uint8) {\n return 18;\n }\n\n /**\n * @dev See {IERC20-totalSupply}.\n */\n function totalSupply() public view virtual override returns (uint256) {\n return _totalSupply;\n }\n\n /**\n * @dev See {IERC20-balanceOf}.\n */\n function balanceOf(address account) public view virtual override returns (uint256) {\n return _balances[account];\n }\n\n /**\n * @dev See {IERC20-transfer}.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - the caller must have a balance of at least `amount`.\n */\n function transfer(address to, uint256 amount) public virtual override returns (bool) {\n address owner = _msgSender();\n _transfer(owner, to, amount);\n return true;\n }\n\n /**\n * @dev See {IERC20-allowance}.\n */\n function allowance(address owner, address spender) public view virtual override returns (uint256) {\n return _allowances[owner][spender];\n }\n\n /**\n * @dev See {IERC20-approve}.\n *\n * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on\n * `transferFrom`. This is semantically equivalent to an infinite approval.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n */\n function approve(address spender, uint256 amount) public virtual override returns (bool) {\n address owner = _msgSender();\n _approve(owner, spender, amount);\n return true;\n }\n\n /**\n * @dev See {IERC20-transferFrom}.\n *\n * Emits an {Approval} event indicating the updated allowance. This is not\n * required by the EIP. See the note at the beginning of {ERC20}.\n *\n * NOTE: Does not update the allowance if the current allowance\n * is the maximum `uint256`.\n *\n * Requirements:\n *\n * - `from` and `to` cannot be the zero address.\n * - `from` must have a balance of at least `amount`.\n * - the caller must have allowance for ``from``'s tokens of at least\n * `amount`.\n */\n function transferFrom(\n address from,\n address to,\n uint256 amount\n ) public virtual override returns (bool) {\n address spender = _msgSender();\n _spendAllowance(from, spender, amount);\n _transfer(from, to, amount);\n return true;\n }\n\n /**\n * @dev Atomically increases the allowance granted to `spender` by the caller.\n *\n * This is an alternative to {approve} that can be used as a mitigation for\n * problems described in {IERC20-approve}.\n *\n * Emits an {Approval} event indicating the updated allowance.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n */\n function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {\n address owner = _msgSender();\n _approve(owner, spender, _allowances[owner][spender] + addedValue);\n return true;\n }\n\n /**\n * @dev Atomically decreases the allowance granted to `spender` by the caller.\n *\n * This is an alternative to {approve} that can be used as a mitigation for\n * problems described in {IERC20-approve}.\n *\n * Emits an {Approval} event indicating the updated allowance.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n * - `spender` must have allowance for the caller of at least\n * `subtractedValue`.\n */\n function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {\n address owner = _msgSender();\n uint256 currentAllowance = _allowances[owner][spender];\n require(currentAllowance >= subtractedValue, \"ERC20: decreased allowance below zero\");\n unchecked {\n _approve(owner, spender, currentAllowance - subtractedValue);\n }\n\n return true;\n }\n\n /**\n * @dev Moves `amount` of tokens from `sender` to `recipient`.\n *\n * This internal function is equivalent to {transfer}, and can be used to\n * e.g. implement automatic token fees, slashing mechanisms, etc.\n *\n * Emits a {Transfer} event.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `from` must have a balance of at least `amount`.\n */\n function _transfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual {\n require(from != address(0), \"ERC20: transfer from the zero address\");\n require(to != address(0), \"ERC20: transfer to the zero address\");\n\n _beforeTokenTransfer(from, to, amount);\n\n uint256 fromBalance = _balances[from];\n require(fromBalance >= amount, \"ERC20: transfer amount exceeds balance\");\n unchecked {\n _balances[from] = fromBalance - amount;\n }\n _balances[to] += amount;\n\n emit Transfer(from, to, amount);\n\n _afterTokenTransfer(from, to, amount);\n }\n\n /** @dev Creates `amount` tokens and assigns them to `account`, increasing\n * the total supply.\n *\n * Emits a {Transfer} event with `from` set to the zero address.\n *\n * Requirements:\n *\n * - `account` cannot be the zero address.\n */\n function _mint(address account, uint256 amount) internal virtual {\n require(account != address(0), \"ERC20: mint to the zero address\");\n\n _beforeTokenTransfer(address(0), account, amount);\n\n _totalSupply += amount;\n _balances[account] += amount;\n emit Transfer(address(0), account, amount);\n\n _afterTokenTransfer(address(0), account, amount);\n }\n\n /**\n * @dev Destroys `amount` tokens from `account`, reducing the\n * total supply.\n *\n * Emits a {Transfer} event with `to` set to the zero address.\n *\n * Requirements:\n *\n * - `account` cannot be the zero address.\n * - `account` must have at least `amount` tokens.\n */\n function _burn(address account, uint256 amount) internal virtual {\n require(account != address(0), \"ERC20: burn from the zero address\");\n\n _beforeTokenTransfer(account, address(0), amount);\n\n uint256 accountBalance = _balances[account];\n require(accountBalance >= amount, \"ERC20: burn amount exceeds balance\");\n unchecked {\n _balances[account] = accountBalance - amount;\n }\n _totalSupply -= amount;\n\n emit Transfer(account, address(0), amount);\n\n _afterTokenTransfer(account, address(0), amount);\n }\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.\n *\n * This internal function is equivalent to `approve`, and can be used to\n * e.g. set automatic allowances for certain subsystems, etc.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `owner` cannot be the zero address.\n * - `spender` cannot be the zero address.\n */\n function _approve(\n address owner,\n address spender,\n uint256 amount\n ) internal virtual {\n require(owner != address(0), \"ERC20: approve from the zero address\");\n require(spender != address(0), \"ERC20: approve to the zero address\");\n\n _allowances[owner][spender] = amount;\n emit Approval(owner, spender, amount);\n }\n\n /**\n * @dev Spend `amount` form the allowance of `owner` toward `spender`.\n *\n * Does not update the allowance amount in case of infinite allowance.\n * Revert if not enough allowance is available.\n *\n * Might emit an {Approval} event.\n */\n function _spendAllowance(\n address owner,\n address spender,\n uint256 amount\n ) internal virtual {\n uint256 currentAllowance = allowance(owner, spender);\n if (currentAllowance != type(uint256).max) {\n require(currentAllowance >= amount, \"ERC20: insufficient allowance\");\n unchecked {\n _approve(owner, spender, currentAllowance - amount);\n }\n }\n }\n\n /**\n * @dev Hook that is called before any transfer of tokens. This includes\n * minting and burning.\n *\n * Calling conditions:\n *\n * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n * will be transferred to `to`.\n * - when `from` is zero, `amount` tokens will be minted for `to`.\n * - when `to` is zero, `amount` of ``from``'s tokens will be burned.\n * - `from` and `to` are never both zero.\n *\n * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _beforeTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual {}\n\n /**\n * @dev Hook that is called after any transfer of tokens. This includes\n * minting and burning.\n *\n * Calling conditions:\n *\n * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n * has been transferred to `to`.\n * - when `from` is zero, `amount` tokens have been minted for `to`.\n * - when `to` is zero, `amount` of ``from``'s tokens have been burned.\n * - `from` and `to` are never both zero.\n *\n * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _afterTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual {}\n}\n"
},
"@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../ERC20.sol\";\nimport \"../../../utils/Context.sol\";\n\n/**\n * @dev Extension of {ERC20} that allows token holders to destroy both their own\n * tokens and those that they have an allowance for, in a way that can be\n * recognized off-chain (via event analysis).\n */\nabstract contract ERC20Burnable is Context, ERC20 {\n /**\n * @dev Destroys `amount` tokens from the caller.\n *\n * See {ERC20-_burn}.\n */\n function burn(uint256 amount) public virtual {\n _burn(_msgSender(), amount);\n }\n\n /**\n * @dev Destroys `amount` tokens from `account`, deducting from the caller's\n * allowance.\n *\n * See {ERC20-_burn} and {ERC20-allowance}.\n *\n * Requirements:\n *\n * - the caller must have allowance for ``accounts``'s tokens of at least\n * `amount`.\n */\n function burnFrom(address account, uint256 amount) public virtual {\n _spendAllowance(account, _msgSender(), amount);\n _burn(account, amount);\n }\n}\n"
},
"@openzeppelin/contracts/token/ERC20/extensions/ERC20Votes.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Votes.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./draft-ERC20Permit.sol\";\nimport \"../../../utils/math/Math.sol\";\nimport \"../../../governance/utils/IVotes.sol\";\nimport \"../../../utils/math/SafeCast.sol\";\nimport \"../../../utils/cryptography/ECDSA.sol\";\n\n/**\n * @dev Extension of ERC20 to support Compound-like voting and delegation. This version is more generic than Compound's,\n * and supports token supply up to 2^224^ - 1, while COMP is limited to 2^96^ - 1.\n *\n * NOTE: If exact COMP compatibility is required, use the {ERC20VotesComp} variant of this module.\n *\n * This extension keeps a history (checkpoints) of each account's vote power. Vote power can be delegated either\n * by calling the {delegate} function directly, or by providing a signature to be used with {delegateBySig}. Voting\n * power can be queried through the public accessors {getVotes} and {getPastVotes}.\n *\n * By default, token balance does not account for voting power. This makes transfers cheaper. The downside is that it\n * requires users to delegate to themselves in order to activate checkpoints and have their voting power tracked.\n *\n * _Available since v4.2._\n */\nabstract contract ERC20Votes is IVotes, ERC20Permit {\n struct Checkpoint {\n uint32 fromBlock;\n uint224 votes;\n }\n\n bytes32 private constant _DELEGATION_TYPEHASH =\n keccak256(\"Delegation(address delegatee,uint256 nonce,uint256 expiry)\");\n\n mapping(address => address) private _delegates;\n mapping(address => Checkpoint[]) private _checkpoints;\n Checkpoint[] private _totalSupplyCheckpoints;\n\n /**\n * @dev Get the `pos`-th checkpoint for `account`.\n */\n function checkpoints(address account, uint32 pos) public view virtual returns (Checkpoint memory) {\n return _checkpoints[account][pos];\n }\n\n /**\n * @dev Get number of checkpoints for `account`.\n */\n function numCheckpoints(address account) public view virtual returns (uint32) {\n return SafeCast.toUint32(_checkpoints[account].length);\n }\n\n /**\n * @dev Get the address `account` is currently delegating to.\n */\n function delegates(address account) public view virtual override returns (address) {\n return _delegates[account];\n }\n\n /**\n * @dev Gets the current votes balance for `account`\n */\n function getVotes(address account) public view virtual override returns (uint256) {\n uint256 pos = _checkpoints[account].length;\n return pos == 0 ? 0 : _checkpoints[account][pos - 1].votes;\n }\n\n /**\n * @dev Retrieve the number of votes for `account` at the end of `blockNumber`.\n *\n * Requirements:\n *\n * - `blockNumber` must have been already mined\n */\n function getPastVotes(address account, uint256 blockNumber) public view virtual override returns (uint256) {\n require(blockNumber < block.number, \"ERC20Votes: block not yet mined\");\n return _checkpointsLookup(_checkpoints[account], blockNumber);\n }\n\n /**\n * @dev Retrieve the `totalSupply` at the end of `blockNumber`. Note, this value is the sum of all balances.\n * It is but NOT the sum of all the delegated votes!\n *\n * Requirements:\n *\n * - `blockNumber` must have been already mined\n */\n function getPastTotalSupply(uint256 blockNumber) public view virtual override returns (uint256) {\n require(blockNumber < block.number, \"ERC20Votes: block not yet mined\");\n return _checkpointsLookup(_totalSupplyCheckpoints, blockNumber);\n }\n\n /**\n * @dev Lookup a value in a list of (sorted) checkpoints.\n */\n function _checkpointsLookup(Checkpoint[] storage ckpts, uint256 blockNumber) private view returns (uint256) {\n // We run a binary search to look for the earliest checkpoint taken after `blockNumber`.\n //\n // During the loop, the index of the wanted checkpoint remains in the range [low-1, high).\n // With each iteration, either `low` or `high` is moved towards the middle of the range to maintain the invariant.\n // - If the middle checkpoint is after `blockNumber`, we look in [low, mid)\n // - If the middle checkpoint is before or equal to `blockNumber`, we look in [mid+1, high)\n // Once we reach a single value (when low == high), we've found the right checkpoint at the index high-1, if not\n // out of bounds (in which case we're looking too far in the past and the result is 0).\n // Note that if the latest checkpoint available is exactly for `blockNumber`, we end up with an index that is\n // past the end of the array, so we technically don't find a checkpoint after `blockNumber`, but it works out\n // the same.\n uint256 high = ckpts.length;\n uint256 low = 0;\n while (low < high) {\n uint256 mid = Math.average(low, high);\n if (ckpts[mid].fromBlock > blockNumber) {\n high = mid;\n } else {\n low = mid + 1;\n }\n }\n\n return high == 0 ? 0 : ckpts[high - 1].votes;\n }\n\n /**\n * @dev Delegate votes from the sender to `delegatee`.\n */\n function delegate(address delegatee) public virtual override {\n _delegate(_msgSender(), delegatee);\n }\n\n /**\n * @dev Delegates votes from signer to `delegatee`\n */\n function delegateBySig(\n address delegatee,\n uint256 nonce,\n uint256 expiry,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) public virtual override {\n require(block.timestamp <= expiry, \"ERC20Votes: signature expired\");\n address signer = ECDSA.recover(\n _hashTypedDataV4(keccak256(abi.encode(_DELEGATION_TYPEHASH, delegatee, nonce, expiry))),\n v,\n r,\n s\n );\n require(nonce == _useNonce(signer), \"ERC20Votes: invalid nonce\");\n _delegate(signer, delegatee);\n }\n\n /**\n * @dev Maximum token supply. Defaults to `type(uint224).max` (2^224^ - 1).\n */\n function _maxSupply() internal view virtual returns (uint224) {\n return type(uint224).max;\n }\n\n /**\n * @dev Snapshots the totalSupply after it has been increased.\n */\n function _mint(address account, uint256 amount) internal virtual override {\n super._mint(account, amount);\n require(totalSupply() <= _maxSupply(), \"ERC20Votes: total supply risks overflowing votes\");\n\n _writeCheckpoint(_totalSupplyCheckpoints, _add, amount);\n }\n\n /**\n * @dev Snapshots the totalSupply after it has been decreased.\n */\n function _burn(address account, uint256 amount) internal virtual override {\n super._burn(account, amount);\n\n _writeCheckpoint(_totalSupplyCheckpoints, _subtract, amount);\n }\n\n /**\n * @dev Move voting power when tokens are transferred.\n *\n * Emits a {DelegateVotesChanged} event.\n */\n function _afterTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual override {\n super._afterTokenTransfer(from, to, amount);\n\n _moveVotingPower(delegates(from), delegates(to), amount);\n }\n\n /**\n * @dev Change delegation for `delegator` to `delegatee`.\n *\n * Emits events {DelegateChanged} and {DelegateVotesChanged}.\n */\n function _delegate(address delegator, address delegatee) internal virtual {\n address currentDelegate = delegates(delegator);\n uint256 delegatorBalance = balanceOf(delegator);\n _delegates[delegator] = delegatee;\n\n emit DelegateChanged(delegator, currentDelegate, delegatee);\n\n _moveVotingPower(currentDelegate, delegatee, delegatorBalance);\n }\n\n function _moveVotingPower(\n address src,\n address dst,\n uint256 amount\n ) private {\n if (src != dst && amount > 0) {\n if (src != address(0)) {\n (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[src], _subtract, amount);\n emit DelegateVotesChanged(src, oldWeight, newWeight);\n }\n\n if (dst != address(0)) {\n (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[dst], _add, amount);\n emit DelegateVotesChanged(dst, oldWeight, newWeight);\n }\n }\n }\n\n function _writeCheckpoint(\n Checkpoint[] storage ckpts,\n function(uint256, uint256) view returns (uint256) op,\n uint256 delta\n ) private returns (uint256 oldWeight, uint256 newWeight) {\n uint256 pos = ckpts.length;\n oldWeight = pos == 0 ? 0 : ckpts[pos - 1].votes;\n newWeight = op(oldWeight, delta);\n\n if (pos > 0 && ckpts[pos - 1].fromBlock == block.number) {\n ckpts[pos - 1].votes = SafeCast.toUint224(newWeight);\n } else {\n ckpts.push(Checkpoint({fromBlock: SafeCast.toUint32(block.number), votes: SafeCast.toUint224(newWeight)}));\n }\n }\n\n function _add(uint256 a, uint256 b) private pure returns (uint256) {\n return a + b;\n }\n\n function _subtract(uint256 a, uint256 b) private pure returns (uint256) {\n return a - b;\n }\n}\n"
},
"@openzeppelin/contracts/access/Ownable.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n constructor() {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n _;\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n"
},
"@openzeppelin/contracts/token/ERC20/IERC20.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Returns the amount of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the amount of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves `amount` tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 amount) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 amount) external returns (bool);\n\n /**\n * @dev Moves `amount` tokens from `from` to `to` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 amount\n ) external returns (bool);\n\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n"
},
"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC20 standard.\n *\n * _Available since v4.1._\n */\ninterface IERC20Metadata is IERC20 {\n /**\n * @dev Returns the name of the token.\n */\n function name() external view returns (string memory);\n\n /**\n * @dev Returns the symbol of the token.\n */\n function symbol() external view returns (string memory);\n\n /**\n * @dev Returns the decimals places of the token.\n */\n function decimals() external view returns (uint8);\n}\n"
},
"@openzeppelin/contracts/utils/Context.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n}\n"
},
"@openzeppelin/contracts/token/ERC20/extensions/draft-ERC20Permit.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-ERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./draft-IERC20Permit.sol\";\nimport \"../ERC20.sol\";\nimport \"../../../utils/cryptography/draft-EIP712.sol\";\nimport \"../../../utils/cryptography/ECDSA.sol\";\nimport \"../../../utils/Counters.sol\";\n\n/**\n * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * _Available since v3.4._\n */\nabstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {\n using Counters for Counters.Counter;\n\n mapping(address => Counters.Counter) private _nonces;\n\n // solhint-disable-next-line var-name-mixedcase\n bytes32 private immutable _PERMIT_TYPEHASH =\n keccak256(\"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)\");\n\n /**\n * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `\"1\"`.\n *\n * It's a good idea to use the same `name` that is defined as the ERC20 token name.\n */\n constructor(string memory name) EIP712(name, \"1\") {}\n\n /**\n * @dev See {IERC20Permit-permit}.\n */\n function permit(\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) public virtual override {\n require(block.timestamp <= deadline, \"ERC20Permit: expired deadline\");\n\n bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));\n\n bytes32 hash = _hashTypedDataV4(structHash);\n\n address signer = ECDSA.recover(hash, v, r, s);\n require(signer == owner, \"ERC20Permit: invalid signature\");\n\n _approve(owner, spender, value);\n }\n\n /**\n * @dev See {IERC20Permit-nonces}.\n */\n function nonces(address owner) public view virtual override returns (uint256) {\n return _nonces[owner].current();\n }\n\n /**\n * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.\n */\n // solhint-disable-next-line func-name-mixedcase\n function DOMAIN_SEPARATOR() external view override returns (bytes32) {\n return _domainSeparatorV4();\n }\n\n /**\n * @dev \"Consume a nonce\": return the current value and increment.\n *\n * _Available since v4.1._\n */\n function _useNonce(address owner) internal virtual returns (uint256 current) {\n Counters.Counter storage nonce = _nonces[owner];\n current = nonce.current();\n nonce.increment();\n }\n}\n"
},
"@openzeppelin/contracts/utils/math/Math.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n /**\n * @dev Returns the largest of two numbers.\n */\n function max(uint256 a, uint256 b) internal pure returns (uint256) {\n return a >= b ? a : b;\n }\n\n /**\n * @dev Returns the smallest of two numbers.\n */\n function min(uint256 a, uint256 b) internal pure returns (uint256) {\n return a < b ? a : b;\n }\n\n /**\n * @dev Returns the average of two numbers. The result is rounded towards\n * zero.\n */\n function average(uint256 a, uint256 b) internal pure returns (uint256) {\n // (a + b) / 2 can overflow.\n return (a & b) + (a ^ b) / 2;\n }\n\n /**\n * @dev Returns the ceiling of the division of two numbers.\n *\n * This differs from standard division with `/` in that it rounds up instead\n * of rounding down.\n */\n function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n // (a + b - 1) / b can overflow on addition, so we distribute.\n return a / b + (a % b == 0 ? 0 : 1);\n }\n}\n"
},
"@openzeppelin/contracts/governance/utils/IVotes.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (governance/utils/IVotes.sol)\npragma solidity ^0.8.0;\n\n/**\n * @dev Common interface for {ERC20Votes}, {ERC721Votes}, and other {Votes}-enabled contracts.\n *\n * _Available since v4.5._\n */\ninterface IVotes {\n /**\n * @dev Emitted when an account changes their delegate.\n */\n event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);\n\n /**\n * @dev Emitted when a token transfer or delegate change results in changes to a delegate's number of votes.\n */\n event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);\n\n /**\n * @dev Returns the current amount of votes that `account` has.\n */\n function getVotes(address account) external view returns (uint256);\n\n /**\n * @dev Returns the amount of votes that `account` had at the end of a past block (`blockNumber`).\n */\n function getPastVotes(address account, uint256 blockNumber) external view returns (uint256);\n\n /**\n * @dev Returns the total supply of votes available at the end of a past block (`blockNumber`).\n *\n * NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.\n * Votes that have not been delegated are still part of total supply, even though they would not participate in a\n * vote.\n */\n function getPastTotalSupply(uint256 blockNumber) external view returns (uint256);\n\n /**\n * @dev Returns the delegate that `account` has chosen.\n */\n function delegates(address account) external view returns (address);\n\n /**\n * @dev Delegates votes from the sender to `delegatee`.\n */\n function delegate(address delegatee) external;\n\n /**\n * @dev Delegates votes from signer to `delegatee`.\n */\n function delegateBySig(\n address delegatee,\n uint256 nonce,\n uint256 expiry,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) external;\n}\n"
},
"@openzeppelin/contracts/utils/math/SafeCast.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n *\n * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing\n * all math on `uint256` and `int256` and then downcasting.\n */\nlibrary SafeCast {\n /**\n * @dev Returns the downcasted uint224 from uint256, reverting on\n * overflow (when the input is greater than largest uint224).\n *\n * Counterpart to Solidity's `uint224` operator.\n *\n * Requirements:\n *\n * - input must fit into 224 bits\n */\n function toUint224(uint256 value) internal pure returns (uint224) {\n require(value <= type(uint224).max, \"SafeCast: value doesn't fit in 224 bits\");\n return uint224(value);\n }\n\n /**\n * @dev Returns the downcasted uint128 from uint256, reverting on\n * overflow (when the input is greater than largest uint128).\n *\n * Counterpart to Solidity's `uint128` operator.\n *\n * Requirements:\n *\n * - input must fit into 128 bits\n */\n function toUint128(uint256 value) internal pure returns (uint128) {\n require(value <= type(uint128).max, \"SafeCast: value doesn't fit in 128 bits\");\n return uint128(value);\n }\n\n /**\n * @dev Returns the downcasted uint96 from uint256, reverting on\n * overflow (when the input is greater than largest uint96).\n *\n * Counterpart to Solidity's `uint96` operator.\n *\n * Requirements:\n *\n * - input must fit into 96 bits\n */\n function toUint96(uint256 value) internal pure returns (uint96) {\n require(value <= type(uint96).max, \"SafeCast: value doesn't fit in 96 bits\");\n return uint96(value);\n }\n\n /**\n * @dev Returns the downcasted uint64 from uint256, reverting on\n * overflow (when the input is greater than largest uint64).\n *\n * Counterpart to Solidity's `uint64` operator.\n *\n * Requirements:\n *\n * - input must fit into 64 bits\n */\n function toUint64(uint256 value) internal pure returns (uint64) {\n require(value <= type(uint64).max, \"SafeCast: value doesn't fit in 64 bits\");\n return uint64(value);\n }\n\n /**\n * @dev Returns the downcasted uint32 from uint256, reverting on\n * overflow (when the input is greater than largest uint32).\n *\n * Counterpart to Solidity's `uint32` operator.\n *\n * Requirements:\n *\n * - input must fit into 32 bits\n */\n function toUint32(uint256 value) internal pure returns (uint32) {\n require(value <= type(uint32).max, \"SafeCast: value doesn't fit in 32 bits\");\n return uint32(value);\n }\n\n /**\n * @dev Returns the downcasted uint16 from uint256, reverting on\n * overflow (when the input is greater than largest uint16).\n *\n * Counterpart to Solidity's `uint16` operator.\n *\n * Requirements:\n *\n * - input must fit into 16 bits\n */\n function toUint16(uint256 value) internal pure returns (uint16) {\n require(value <= type(uint16).max, \"SafeCast: value doesn't fit in 16 bits\");\n return uint16(value);\n }\n\n /**\n * @dev Returns the downcasted uint8 from uint256, reverting on\n * overflow (when the input is greater than largest uint8).\n *\n * Counterpart to Solidity's `uint8` operator.\n *\n * Requirements:\n *\n * - input must fit into 8 bits.\n */\n function toUint8(uint256 value) internal pure returns (uint8) {\n require(value <= type(uint8).max, \"SafeCast: value doesn't fit in 8 bits\");\n return uint8(value);\n }\n\n /**\n * @dev Converts a signed int256 into an unsigned uint256.\n *\n * Requirements:\n *\n * - input must be greater than or equal to 0.\n */\n function toUint256(int256 value) internal pure returns (uint256) {\n require(value >= 0, \"SafeCast: value must be positive\");\n return uint256(value);\n }\n\n /**\n * @dev Returns the downcasted int128 from int256, reverting on\n * overflow (when the input is less than smallest int128 or\n * greater than largest int128).\n *\n * Counterpart to Solidity's `int128` operator.\n *\n * Requirements:\n *\n * - input must fit into 128 bits\n *\n * _Available since v3.1._\n */\n function toInt128(int256 value) internal pure returns (int128) {\n require(value >= type(int128).min && value <= type(int128).max, \"SafeCast: value doesn't fit in 128 bits\");\n return int128(value);\n }\n\n /**\n * @dev Returns the downcasted int64 from int256, reverting on\n * overflow (when the input is less than smallest int64 or\n * greater than largest int64).\n *\n * Counterpart to Solidity's `int64` operator.\n *\n * Requirements:\n *\n * - input must fit into 64 bits\n *\n * _Available since v3.1._\n */\n function toInt64(int256 value) internal pure returns (int64) {\n require(value >= type(int64).min && value <= type(int64).max, \"SafeCast: value doesn't fit in 64 bits\");\n return int64(value);\n }\n\n /**\n * @dev Returns the downcasted int32 from int256, reverting on\n * overflow (when the input is less than smallest int32 or\n * greater than largest int32).\n *\n * Counterpart to Solidity's `int32` operator.\n *\n * Requirements:\n *\n * - input must fit into 32 bits\n *\n * _Available since v3.1._\n */\n function toInt32(int256 value) internal pure returns (int32) {\n require(value >= type(int32).min && value <= type(int32).max, \"SafeCast: value doesn't fit in 32 bits\");\n return int32(value);\n }\n\n /**\n * @dev Returns the downcasted int16 from int256, reverting on\n * overflow (when the input is less than smallest int16 or\n * greater than largest int16).\n *\n * Counterpart to Solidity's `int16` operator.\n *\n * Requirements:\n *\n * - input must fit into 16 bits\n *\n * _Available since v3.1._\n */\n function toInt16(int256 value) internal pure returns (int16) {\n require(value >= type(int16).min && value <= type(int16).max, \"SafeCast: value doesn't fit in 16 bits\");\n return int16(value);\n }\n\n /**\n * @dev Returns the downcasted int8 from int256, reverting on\n * overflow (when the input is less than smallest int8 or\n * greater than largest int8).\n *\n * Counterpart to Solidity's `int8` operator.\n *\n * Requirements:\n *\n * - input must fit into 8 bits.\n *\n * _Available since v3.1._\n */\n function toInt8(int256 value) internal pure returns (int8) {\n require(value >= type(int8).min && value <= type(int8).max, \"SafeCast: value doesn't fit in 8 bits\");\n return int8(value);\n }\n\n /**\n * @dev Converts an unsigned uint256 into a signed int256.\n *\n * Requirements:\n *\n * - input must be less than or equal to maxInt256.\n */\n function toInt256(uint256 value) internal pure returns (int256) {\n // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n require(value <= uint256(type(int256).max), \"SafeCast: value doesn't fit in an int256\");\n return int256(value);\n }\n}\n"
},
"@openzeppelin/contracts/utils/cryptography/ECDSA.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../Strings.sol\";\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n enum RecoverError {\n NoError,\n InvalidSignature,\n InvalidSignatureLength,\n InvalidSignatureS,\n InvalidSignatureV\n }\n\n function _throwError(RecoverError error) private pure {\n if (error == RecoverError.NoError) {\n return; // no error: do nothing\n } else if (error == RecoverError.InvalidSignature) {\n revert(\"ECDSA: invalid signature\");\n } else if (error == RecoverError.InvalidSignatureLength) {\n revert(\"ECDSA: invalid signature length\");\n } else if (error == RecoverError.InvalidSignatureS) {\n revert(\"ECDSA: invalid signature 's' value\");\n } else if (error == RecoverError.InvalidSignatureV) {\n revert(\"ECDSA: invalid signature 'v' value\");\n }\n }\n\n /**\n * @dev Returns the address that signed a hashed message (`hash`) with\n * `signature` or error string. This address can then be used for verification purposes.\n *\n * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n * this function rejects them by requiring the `s` value to be in the lower\n * half order, and the `v` value to be either 27 or 28.\n *\n * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n * verification to be secure: it is possible to craft signatures that\n * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n * this is by receiving a hash of the original message (which may otherwise\n * be too long), and then calling {toEthSignedMessageHash} on it.\n *\n * Documentation for signature generation:\n * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n *\n * _Available since v4.3._\n */\n function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {\n // Check the signature length\n // - case 65: r,s,v signature (standard)\n // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._\n if (signature.length == 65) {\n bytes32 r;\n bytes32 s;\n uint8 v;\n // ecrecover takes the signature parameters, and the only way to get them\n // currently is to use assembly.\n assembly {\n r := mload(add(signature, 0x20))\n s := mload(add(signature, 0x40))\n v := byte(0, mload(add(signature, 0x60)))\n }\n return tryRecover(hash, v, r, s);\n } else if (signature.length == 64) {\n bytes32 r;\n bytes32 vs;\n // ecrecover takes the signature parameters, and the only way to get them\n // currently is to use assembly.\n assembly {\n r := mload(add(signature, 0x20))\n vs := mload(add(signature, 0x40))\n }\n return tryRecover(hash, r, vs);\n } else {\n return (address(0), RecoverError.InvalidSignatureLength);\n }\n }\n\n /**\n * @dev Returns the address that signed a hashed message (`hash`) with\n * `signature`. This address can then be used for verification purposes.\n *\n * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n * this function rejects them by requiring the `s` value to be in the lower\n * half order, and the `v` value to be either 27 or 28.\n *\n * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n * verification to be secure: it is possible to craft signatures that\n * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n * this is by receiving a hash of the original message (which may otherwise\n * be too long), and then calling {toEthSignedMessageHash} on it.\n */\n function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, signature);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n *\n * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]\n *\n * _Available since v4.3._\n */\n function tryRecover(\n bytes32 hash,\n bytes32 r,\n bytes32 vs\n ) internal pure returns (address, RecoverError) {\n bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n uint8 v = uint8((uint256(vs) >> 255) + 27);\n return tryRecover(hash, v, r, s);\n }\n\n /**\n * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\n *\n * _Available since v4.2._\n */\n function recover(\n bytes32 hash,\n bytes32 r,\n bytes32 vs\n ) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, r, vs);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n * `r` and `s` signature fields separately.\n *\n * _Available since v4.3._\n */\n function tryRecover(\n bytes32 hash,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) internal pure returns (address, RecoverError) {\n // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n //\n // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n // these malleable signatures as well.\n if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n return (address(0), RecoverError.InvalidSignatureS);\n }\n if (v != 27 && v != 28) {\n return (address(0), RecoverError.InvalidSignatureV);\n }\n\n // If the signature is valid (and not malleable), return the signer address\n address signer = ecrecover(hash, v, r, s);\n if (signer == address(0)) {\n return (address(0), RecoverError.InvalidSignature);\n }\n\n return (signer, RecoverError.NoError);\n }\n\n /**\n * @dev Overload of {ECDSA-recover} that receives the `v`,\n * `r` and `s` signature fields separately.\n */\n function recover(\n bytes32 hash,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, v, r, s);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Returns an Ethereum Signed Message, created from a `hash`. This\n * produces hash corresponding to the one signed with the\n * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n * JSON-RPC method as part of EIP-191.\n *\n * See {recover}.\n */\n function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {\n // 32 is the length in bytes of hash,\n // enforced by the type signature above\n return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n32\", hash));\n }\n\n /**\n * @dev Returns an Ethereum Signed Message, created from `s`. This\n * produces hash corresponding to the one signed with the\n * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n * JSON-RPC method as part of EIP-191.\n *\n * See {recover}.\n */\n function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {\n return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n\", Strings.toString(s.length), s));\n }\n\n /**\n * @dev Returns an Ethereum Signed Typed Data, created from a\n * `domainSeparator` and a `structHash`. This produces hash corresponding\n * to the one signed with the\n * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]\n * JSON-RPC method as part of EIP-712.\n *\n * See {recover}.\n */\n function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {\n return keccak256(abi.encodePacked(\"\\x19\\x01\", domainSeparator, structHash));\n }\n}\n"
},
"@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20Permit {\n /**\n * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n * given ``owner``'s signed approval.\n *\n * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n * ordering also apply here.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n * - `deadline` must be a timestamp in the future.\n * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n * over the EIP712-formatted function arguments.\n * - the signature must use ``owner``'s current nonce (see {nonces}).\n *\n * For more information on the signature format, see the\n * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n * section].\n */\n function permit(\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) external;\n\n /**\n * @dev Returns the current nonce for `owner`. This value must be\n * included whenever a signature is generated for {permit}.\n *\n * Every successful call to {permit} increases ``owner``'s nonce by one. This\n * prevents a signature from being used multiple times.\n */\n function nonces(address owner) external view returns (uint256);\n\n /**\n * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n */\n // solhint-disable-next-line func-name-mixedcase\n function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"
},
"@openzeppelin/contracts/utils/cryptography/draft-EIP712.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./ECDSA.sol\";\n\n/**\n * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.\n *\n * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,\n * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding\n * they need in their contracts using a combination of `abi.encode` and `keccak256`.\n *\n * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding\n * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA\n * ({_hashTypedDataV4}).\n *\n * The implementation of the domain separator was designed to be as efficient as possible while still properly updating\n * the chain id to protect against replay attacks on an eventual fork of the chain.\n *\n * NOTE: This contract implements the version of the encoding known as \"v4\", as implemented by the JSON RPC method\n * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].\n *\n * _Available since v3.4._\n */\nabstract contract EIP712 {\n /* solhint-disable var-name-mixedcase */\n // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to\n // invalidate the cached domain separator if the chain id changes.\n bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;\n uint256 private immutable _CACHED_CHAIN_ID;\n address private immutable _CACHED_THIS;\n\n bytes32 private immutable _HASHED_NAME;\n bytes32 private immutable _HASHED_VERSION;\n bytes32 private immutable _TYPE_HASH;\n\n /* solhint-enable var-name-mixedcase */\n\n /**\n * @dev Initializes the domain separator and parameter caches.\n *\n * The meaning of `name` and `version` is specified in\n * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:\n *\n * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.\n * - `version`: the current major version of the signing domain.\n *\n * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart\n * contract upgrade].\n */\n constructor(string memory name, string memory version) {\n bytes32 hashedName = keccak256(bytes(name));\n bytes32 hashedVersion = keccak256(bytes(version));\n bytes32 typeHash = keccak256(\n \"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\"\n );\n _HASHED_NAME = hashedName;\n _HASHED_VERSION = hashedVersion;\n _CACHED_CHAIN_ID = block.chainid;\n _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);\n _CACHED_THIS = address(this);\n _TYPE_HASH = typeHash;\n }\n\n /**\n * @dev Returns the domain separator for the current chain.\n */\n function _domainSeparatorV4() internal view returns (bytes32) {\n if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {\n return _CACHED_DOMAIN_SEPARATOR;\n } else {\n return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);\n }\n }\n\n function _buildDomainSeparator(\n bytes32 typeHash,\n bytes32 nameHash,\n bytes32 versionHash\n ) private view returns (bytes32) {\n return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));\n }\n\n /**\n * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this\n * function returns the hash of the fully encoded EIP712 message for this domain.\n *\n * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:\n *\n * ```solidity\n * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(\n * keccak256(\"Mail(address to,string contents)\"),\n * mailTo,\n * keccak256(bytes(mailContents))\n * )));\n * address signer = ECDSA.recover(digest, signature);\n * ```\n */\n function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {\n return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);\n }\n}\n"
},
"@openzeppelin/contracts/utils/Counters.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @title Counters\n * @author Matt Condon (@shrugs)\n * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number\n * of elements in a mapping, issuing ERC721 ids, or counting request ids.\n *\n * Include with `using Counters for Counters.Counter;`\n */\nlibrary Counters {\n struct Counter {\n // This variable should never be directly accessed by users of the library: interactions must be restricted to\n // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add\n // this feature: see https://github.com/ethereum/solidity/issues/4637\n uint256 _value; // default: 0\n }\n\n function current(Counter storage counter) internal view returns (uint256) {\n return counter._value;\n }\n\n function increment(Counter storage counter) internal {\n unchecked {\n counter._value += 1;\n }\n }\n\n function decrement(Counter storage counter) internal {\n uint256 value = counter._value;\n require(value > 0, \"Counter: decrement overflow\");\n unchecked {\n counter._value = value - 1;\n }\n }\n\n function reset(Counter storage counter) internal {\n counter._value = 0;\n }\n}\n"
},
"@openzeppelin/contracts/utils/Strings.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n bytes16 private constant _HEX_SYMBOLS = \"0123456789abcdef\";\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n */\n function toString(uint256 value) internal pure returns (string memory) {\n // Inspired by OraclizeAPI's implementation - MIT licence\n // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol\n\n if (value == 0) {\n return \"0\";\n }\n uint256 temp = value;\n uint256 digits;\n while (temp != 0) {\n digits++;\n temp /= 10;\n }\n bytes memory buffer = new bytes(digits);\n while (value != 0) {\n digits -= 1;\n buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));\n value /= 10;\n }\n return string(buffer);\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n */\n function toHexString(uint256 value) internal pure returns (string memory) {\n if (value == 0) {\n return \"0x00\";\n }\n uint256 temp = value;\n uint256 length = 0;\n while (temp != 0) {\n length++;\n temp >>= 8;\n }\n return toHexString(value, length);\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n */\n function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n bytes memory buffer = new bytes(2 * length + 2);\n buffer[0] = \"0\";\n buffer[1] = \"x\";\n for (uint256 i = 2 * length + 1; i > 1; --i) {\n buffer[i] = _HEX_SYMBOLS[value & 0xf];\n value >>= 4;\n }\n require(value == 0, \"Strings: hex length insufficient\");\n return string(buffer);\n }\n}\n"
},
"contracts/MintManager.sol": {
"content": "// SPDX-License-Identifier: MIT\npragma solidity 0.8.12;\n\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\nimport \"./GovernanceToken.sol\";\n\n/**\n * @title MintManager\n * @notice Set as `owner` of the OP token and responsible for the token inflation schedule.\n * Contract acts as the token \"mint manager\" with permission to the `mint` function only.\n * Currently permitted to mint once per year of up to 2% of the total token supply.\n * Upgradable to allow changes in the inflation schedule.\n */\ncontract MintManager is Ownable {\n /**\n * @notice The GovernanceToken that the MintManager can mint tokens\n */\n GovernanceToken public immutable governanceToken;\n\n /**\n * @notice The amount of tokens that can be minted per year. The value is a fixed\n * point number with 4 decimals.\n */\n uint256 public constant MINT_CAP = 20; // 2%\n\n /**\n * @notice The number of decimals for the MINT_CAP.\n */\n uint256 public constant DENOMINATOR = 1000;\n\n /**\n * @notice The amount of time that must pass before the MINT_CAP number of tokens can\n * be minted again.\n */\n uint256 public constant MINT_PERIOD = 365 days;\n\n /**\n * @notice Tracks the time of last mint\n */\n uint256 public mintPermittedAfter;\n\n /**\n * @param _upgrader The owner of this contract\n * @param _governanceToken The governance token this contract can mint\n * tokens of\n */\n constructor(address _upgrader, address _governanceToken) {\n transferOwnership(_upgrader);\n governanceToken = GovernanceToken(_governanceToken);\n }\n\n /**\n * @notice Only the token owner is allowed to mint a certain amount of OP per year.\n *\n * @param _account Address to mint new tokens to.\n * @param _amount Amount of tokens to be minted.\n */\n function mint(address _account, uint256 _amount) public onlyOwner {\n if (mintPermittedAfter > 0) {\n require(mintPermittedAfter <= block.timestamp, \"OP: minting not permitted yet\");\n\n require(\n _amount <= (governanceToken.totalSupply() * MINT_CAP) / DENOMINATOR,\n \"OP: mint amount exceeds cap\"\n );\n }\n\n mintPermittedAfter = block.timestamp + MINT_PERIOD;\n\n governanceToken.mint(_account, _amount);\n }\n\n /**\n * @notice Upgrade the owner of the governance token to a new MintManager.\n *\n * @param _newMintManager The MintManager to upgrade to\n */\n function upgrade(address _newMintManager) public onlyOwner {\n require(_newMintManager != address(0), \"OP: Mint manager cannot be empty\");\n\n governanceToken.transferOwnership(_newMintManager);\n }\n}\n"
},
"contracts/test/TestERC20.sol": {
"content": "// SPDX-License-Identifier: UNLICENSED\npragma solidity =0.8.12;\n\nimport \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\n\ncontract TestERC20 is ERC20 {\n constructor(\n string memory name_,\n string memory symbol_,\n uint256 amountToMint\n ) ERC20(name_, symbol_) {\n setBalance(msg.sender, amountToMint);\n }\n\n // sets the balance of the address\n // this mints/burns the amount depending on the current balance\n function setBalance(address to, uint256 amount) public {\n uint256 old = balanceOf(to);\n if (old < amount) {\n _mint(to, amount - old);\n } else if (old > amount) {\n _burn(to, old - amount);\n }\n }\n}\n"
},
"contracts/MerkleDistributor.sol": {
"content": "// SPDX-License-Identifier: UNLICENSED\npragma solidity =0.8.12;\n\nimport \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport \"@openzeppelin/contracts/utils/cryptography/MerkleProof.sol\";\nimport \"./interfaces/IMerkleDistributor.sol\";\n\ncontract MerkleDistributor is IMerkleDistributor {\n address public immutable override token;\n bytes32 public immutable override merkleRoot;\n\n uint256 public constant ONE_YEAR_IN_SECONDS = 31_536_000;\n uint256 public immutable activationTimestamp;\n address public immutable airdropTreasury;\n bool public isActive;\n\n // This is a packed array of booleans.\n mapping(uint256 => uint256) private claimedBitMap;\n\n event Finalised(address indexed calledBy, uint256 timestamp, uint256 unclaimedAmount);\n\n constructor(\n address token_,\n bytes32 merkleRoot_,\n address _treasury\n ) {\n token = token_;\n merkleRoot = merkleRoot_;\n\n activationTimestamp = block.timestamp;\n isActive = true;\n airdropTreasury = _treasury;\n }\n\n function isClaimed(uint256 index) public view override returns (bool) {\n uint256 claimedWordIndex = index / 256;\n uint256 claimedBitIndex = index % 256;\n uint256 claimedWord = claimedBitMap[claimedWordIndex];\n uint256 mask = (1 << claimedBitIndex);\n return claimedWord & mask == mask;\n }\n\n function _setClaimed(uint256 index) private {\n uint256 claimedWordIndex = index / 256;\n uint256 claimedBitIndex = index % 256;\n claimedBitMap[claimedWordIndex] = claimedBitMap[claimedWordIndex] | (1 << claimedBitIndex);\n }\n\n function claim(\n uint256 index,\n address account,\n uint256 amount,\n bytes32[] calldata merkleProof\n ) external override {\n require(!isClaimed(index), \"MerkleDistributor: Drop already claimed.\");\n\n // Verify the merkle proof.\n bytes32 node = keccak256(abi.encodePacked(index, account, amount));\n require(\n MerkleProof.verify(merkleProof, merkleRoot, node),\n \"MerkleDistributor: Invalid proof.\"\n );\n\n // Mark it claimed and send the token.\n _setClaimed(index);\n require(IERC20(token).transfer(account, amount), \"MerkleDistributor: Transfer failed.\");\n\n emit Claimed(index, account, amount);\n }\n\n /**\n * @dev Finalises the airdrop and sweeps unclaimed tokens into the Optimism multisig\n */\n function clawBack() external {\n // Airdrop can only be finalised once\n require(isActive, \"Airdrop: Already finalised\");\n // Airdrop will remain open for one year\n require(\n block.timestamp >= activationTimestamp + ONE_YEAR_IN_SECONDS,\n \"Airdrop: Drop should remain open for one year\"\n );\n // Deactivate airdrop\n isActive = false;\n\n // Sweep unclaimed tokens\n uint256 amount = IERC20(token).balanceOf(address(this));\n require(\n IERC20(token).transfer(airdropTreasury, amount),\n \"Airdrop: Finalise transfer failed\"\n );\n\n emit Finalised(msg.sender, block.timestamp, amount);\n }\n}\n"
},
"@openzeppelin/contracts/utils/cryptography/MerkleProof.sol": {
"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/MerkleProof.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev These functions deal with verification of Merkle Trees proofs.\n *\n * The proofs can be generated using the JavaScript library\n * https://github.com/miguelmota/merkletreejs[merkletreejs].\n * Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.\n *\n * See `test/utils/cryptography/MerkleProof.test.js` for some examples.\n */\nlibrary MerkleProof {\n /**\n * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree\n * defined by `root`. For this, a `proof` must be provided, containing\n * sibling hashes on the branch from the leaf to the root of the tree. Each\n * pair of leaves and each pair of pre-images are assumed to be sorted.\n */\n function verify(\n bytes32[] memory proof,\n bytes32 root,\n bytes32 leaf\n ) internal pure returns (bool) {\n return processProof(proof, leaf) == root;\n }\n\n /**\n * @dev Returns the rebuilt hash obtained by traversing a Merklee tree up\n * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt\n * hash matches the root of the tree. When processing the proof, the pairs\n * of leafs & pre-images are assumed to be sorted.\n *\n * _Available since v4.4._\n */\n function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {\n bytes32 computedHash = leaf;\n for (uint256 i = 0; i < proof.length; i++) {\n bytes32 proofElement = proof[i];\n if (computedHash <= proofElement) {\n // Hash(current computed hash + current element of the proof)\n computedHash = _efficientHash(computedHash, proofElement);\n } else {\n // Hash(current element of the proof + current computed hash)\n computedHash = _efficientHash(proofElement, computedHash);\n }\n }\n return computedHash;\n }\n\n function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {\n assembly {\n mstore(0x00, a)\n mstore(0x20, b)\n value := keccak256(0x00, 0x40)\n }\n }\n}\n"
},
"contracts/interfaces/IMerkleDistributor.sol": {
"content": "// SPDX-License-Identifier: UNLICENSED\npragma solidity >=0.8.12;\n\n// Allows anyone to claim a token if they exist in a merkle root.\ninterface IMerkleDistributor {\n // Returns the address of the token distributed by this contract.\n function token() external view returns (address);\n\n // Returns the merkle root of the merkle tree containing account balances available to claim.\n function merkleRoot() external view returns (bytes32);\n\n // Returns true if the index has been marked claimed.\n function isClaimed(uint256 index) external view returns (bool);\n\n // Claim the given amount of the token to the given address. Reverts if the inputs are invalid.\n function claim(\n uint256 index,\n address account,\n uint256 amount,\n bytes32[] calldata merkleProof\n ) external;\n\n // This event is triggered whenever a call to #claim succeeds.\n event Claimed(uint256 index, address account, uint256 amount);\n}\n"
}
},
"settings": {
"outputSelection": {
"*": {
"*": [
"metadata",
"storageLayout",
"abi",
"evm.bytecode",
"evm.deployedBytecode",
"evm.methodIdentifiers",
"devdoc",
"userdoc",
"evm.gasEstimates"
],
"": [
"ast"
]
}
},
"optimizer": {
"enabled": false,
"runs": 200
},
"metadata": {
"useLiteralContent": true
}
}
}