UNPKG

@nataliapc/mcp-openmsx

Version:

Model context protocol server for openMSX automation and control

github.com/nataliapc/mcp-openmsx

nataliapc/mcp-openmsx

57 lines (33 loc) • 2.77 kB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
# RUN ## Effect Executes a BASIC program present in the MSX memory or after loading of this program in the MSX memory. For the latter, if you use cassette (device `CAS`), the program to be loaded and run must be in ASCII text, what means that it must have been saved with `SAVE` (which uses ASCII format), not with `CSAVE` (which uses tokenized format). However, to load and manually run for BASIC programs in tokenized format on tape, you can just use `RUN` after `CLOAD`. If you use another device, the program can be in ASCII mode or in tokenized format. ## Syntax `RUN <LineNumber>` `RUN "<Device>:\<Path>\<Filename>"` _Notes:_ - Character backslash `\` serves as a separator between the folders and the file name in MSX-DOS2. You don't have to put it after the colon of the device name. - Parameters in quotes can be replaced by a alphanumeric variable containing the corresponding parameters. - Character backslash is replaced by the character yen `¥` on Japanese MSX or the character won `₩` on Korean MSX. - Parameters can not end with a comma alone. ## Parameters `<LineNumber>` specifies the line number where the BASIC program will start. This parameter is available only if the program is currently in the MSX memory (after having been loaded with `LOAD` or `CLOAD` or directly entered on the MSX-BASIC screen). By default, the program start at the first line. `<Device>` is the name for used device (see table below). |Device type|Device name|Remark| |:--|:-:|---| |Disk drive|A, B, C, D, E, F, G, H|A floppy disk interface can control until 2 drives.| |Data recorder|CAS|Not available on MSX turbo R| |Memory disk|MEM|Created with CALL MEMINI| |Stringy Floppy Drive<br>(special data recorder)|S|Requires Spectravideo SVI-777Not available on MSX turbo R| By default, the loading will be made from tape on a system without any disk drive, from the current active drive (generally drive A) in the other cases. `<Path>` is used to specify the location in folders of file to execute. Each folder name in path are separate by a backslash `\`. This parameter is only available in version 2 of Disk BASIC. `<Filename>` is the name of BASIC program to run. It needs to be specified if the file is on disk or memory disk. If you use a tape and don't indicate the file name, `RUN` will load and execute the first BASIC program in ASCII text found on tape. The size of file name is limited to 6 characters without extension, when the file is saved on tape. If another device is used, then the size is 8 characters followed by a point and an extension with 3 characters. ## Related to `CALL MEMINI`, `CLOAD`, `CSAVE`, `LOAD`, `MERGE`, `SAVE` ## Compatibility MSX-BASIC 1.0 or higher ## Source Retrieved from "https://www.msx.org/wiki/RUN"