UNPKG

@nataliapc/mcp-openmsx

Version:

Model context protocol server for openMSX automation and control

github.com/nataliapc/mcp-openmsx

nataliapc/mcp-openmsx

120 lines (61 loc) • 2.65 kB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
# CALL PAUSE `CALL PAUSE` is a standard instruction for _MSX turbo R_, but it is also an extended instruction available in _ChakkariCopy Basic_, _DM-System2 Basic_ and _Hitachi Basic_. # CALL PAUSE as standard MSX-BASIC instruction ## Effect Stops execution of a BASIC program for the specified time. ## Syntax `CALL PAUSE (<Time>)` ## Parameter `<Time>` is waiting time exprimed in milliseconds. The value can be between 0 and 65535. _Note: You can interrupt the execution during the waiting period by pressing `CTRL`+`STOP`._ ## Example ```basic CALL PAUSE(1000) ``` ## Using When `CALL PAUSE` is being executed, interrupt is enabled. Even when `CALL PAUSE` is being executed, you can quit the program by the `CTRL` + `STOP` keys. This instruction is used when you want to take a timing without being affected by the CPU execution speed. ## Related to `TIME`, `WAIT` ## Compatibility MSX-BASIC 4.0 or higher # CALL PAUSE in ChakkariCopy Basic ## Effect Puts the cartridge into `PAUSE` mode. _Note: the paused program can only be resumed by pressing the `PAUSE` button. It cannot be resumed by software._ ## Syntax `CALL PAUSE` ## Related to `CALL SCHANGE` ## Using In the `PAUSE` mode it's only possible to print a hardcopy by pressing the `COPY` button or to resume execution by pressing the `PAUSE` button. It's the same operation as pressing the `PAUSE` button on the cartridge. ## Compatibility ChakkariCopy BASIC # CALL PAUSE in DM-System2 Basic ## Effect Stops execution of a BASIC program for the specified time. _Note: You can interrupt the execution during the waiting period by pressing `CTRL`+`STOP`._ ## Syntax `CALL PAUSE (<Time>)` ## Parameter `<Time>` is waiting time exprimed in milliseconds. The value can be between 0 and 65535. ## Example `CALL PAUSE(1000)` ## Using When the `CALL PAUSE` is being executed, interrupt is enabled. Even when the `CALL PAUSE` is being executed, you can quit the program by the `CTRL` + `STOP` keys. This instruction is used when you want to take a timing without being affected by the CPU execution speed. It's exactly the same instruction as the standard `CALL PAUSE` for _MSX Turbo R_, but can be used also on _MSX2_ and _MSX2+_. ## Related to `CALL INTWAIT`, `CALL VDPWAIT`, `CALL WAIT` ## Compatibility DM-System2 BASIC # CALL PAUSE in Hitachi Basic ## Effect Puts the built-in data reader of the _Hitachi MB-H2_ computer in pause mode. ## Syntax `CALL PAUSE` ## Related to `CALL FF`, `CALL PLAY`, `CALL REC`, `CALL REW`, `CALL STOP` ## Compatibility Hitachi BASIC version 1 ## Source Retrieved from "https://www.msx.org/wiki/CALL_PAUSE"