@metz-connect/node-red-ewio2

{ "label": { "host": "Host", "showEWIO2": "Show all discovered EWIO2", "searchEWIO2": "Search EWIO2", "encryption": "Enable secure (SSL/TLS) connection", "tlsConfig": "TLS configuration", "user": "User", "password": "Password", "name": "Name", "port": "Port", "valueConfig": "Config.", "status": "State", "value": "Value", "manualMode": "Man. mode", "pulseCntr": "Pulse count.", "trigger": "Node reacts to...", "inputSignal": "Input signal at node", "risingEdge": "Rising edge at EWIO2", "fallingEdge": "Falling edge at EWIO2", "valueUpdate": "Change in value at EWIO2", "counter": "Meter", "datapoint": "Datapoint", "timestamp": "Timestamp", "range": "Range", "nodeOutput": "Additional node output values...", "loadMeasurements": "Load measured values from the data base...", "quantity": "Quantity" }, "status": { "nodeRedNotAvailable": "Node-RED not available!", "nodeRedNotRunning": "Node-RED not running!", "notAuthorized": "Wrong credentials!", "configNodeMissing": "Incorrect EWIO2 configuration!", "notReachable": "Cannot connect to EWIO2! __error__", "noConnection": "No connection to EWIO2", "portCommError": "Communication problem with port!", "timeout": "Timeout, EWIO2 not reachable! __error__", "timeoutWsMsg": "Communication problem with EWIO2!", "invalidURL": "Invalid hostname", "missingCertificate": "Certificate missing!", "selfSignedCertificate": "Self signed certificate!", "invalidCertificateAltname": "Hostname does not match certificate's altnames! __error__", "tlsConfigMissing": "No TLS configuration available!", "unhandeledError": "Error! __error__", "connected": "Connected", "missingEwio": "EWIO2 missing!", "missingHost": "Hostname missing!", "missingUser": "Username missing!", "missingPw": "Password missing!", "missingEnc": "Encryption flag missing!", "manualModeActive": "Manual mode active!", "counterDeactivated": "Meter deactivated!", "noBoolOrNumber": "No input signal of type 'boolean' or 'number'!", "noNumber": "No input signal of type 'number'!", "noObject": "Payload of input signal is not type 'object'!", "noFromTo": "Payload of input signal is missing a 'from' and/or 'to' element!", "wrongMsgTopicType": "No input signal of type 'string'!", "wrongMsgTopic": "Unknown input topic!", "notPulseCntr": "Port is not a pulse counter!", "triggerInputInactive": "Trigger on input signal deactivated", "insufficientAccessRights": "No Permission for user: Standard!", "bacnetServerActive": "Output is controlled via BACnet!", "missingPort": "'Port' missing!", "aiConfigWarning": "DIP-switch 1 must be set to ON for current measurement!", "aiConfigInfo": "The configuration will be set immediately at EWIO2 on change!", "no_metering": "EWIO2 without metering interface!", "noCounter": "No meter configured at EWIO2!", "noData": "No data available yet!", "getMeasurementsFailed": "Retrieving data failed!", "loginFailed": "Login failed to retrieve data" }, "ewio2Info": { "noEWIO2": "No EWIO2 discovered!", "noInfo": "No information available!", "host": "Host", "ipAddress": "IP address", "thisDevice": "this EWIO2", "macAddress": "MAC address", "hwModel": "Model", "serial": "Serial number", "swVersion": "Version", "location": "Location" }, "settings": { "logEnabled": "Logging", "logfilePath": "Path" }, "sensorAI": { "inactive_": "Input inactive", "volt_0_10_pc_%": "Voltage measurement: 0 - 10 V (0..100%)", "volt_0_5_pl_pc_%": "Voltage measurement: 0 - 5 V Pullup (0..100%)", "volt_0_10_V": "Voltage measurement: 0 - 10 V", "volt_0_5_pl_V": "Voltage measurement: 0 - 5 V Pullup", "ohm_40_4m_ohm": "Resistance measurement: 40 Ohm - 4 MOhm", "usr_def": "User defined", "pt100_°C": "Sensor type: PT100 (-50..+150 °C)", "pt500_°C": "Sensor type: PT500 (-50..+150 °C)", "pt1000_°C": "Sensor type: PT1000 (-50..+150 °C)", "ni1000_tc5000_°C": "Sensor type: Ni1000-Tc5000 (-50..+150 °C)", "ni1000_tc6180_°C": "Sensor type: Ni1000-Tc6180 (-50..+150 °C)", "balco500_°C": "Sensor type: Balco500 (-40..+150 °C)", "kty81_110_°C": "Sensor type: KTY81_110 (-40..+150 °C)", "kty81_210_°C": "Sensor type: KTY81_210 (-40..+150 °C)", "ntc_1k8_th_°C": "Sensor type: NTC1K8 Thermokon (-50..+150 °C)", "ntc_5k_th_°C": "Sensor type: NTC5K Thermokon (-50..+150 °C)", "ntc_10k_th_°C": "Sensor type: NTC10K Thermokon (-50..+150 °C)", "ntc_20k_th_°C": "Sensor type: NTC20K Thermokon (-50..+150 °C)", "lm235z_°C": "IC temperature sensor: LM235Z (-50..150 °C)", "ntc_10k_carel_°C": "Sensor type: NTC10K Carel (-50..+110 °C)", "ntc_5k_sch_°C": "Sensor type: NTC5K Schneider (-50..+150 °C)", "ntc_30k_sch_°C": "Sensor type: NTC30K Schneider (-50..+150 °C)", "kp250_°C": "Sensor type: KP250 (-50..+150°C)", "poti_10k_pc_%": "Sensor type: Potentiometer 10 kOhm (0..100%)", "inactive2_": "Input inactive", "ampere_0_20_pc_%": "Current measurement: 0 - 20 mA (0..100%)", "ampere_0_20_mA": "Current measurement: 0 - 20 mA", "ampere_4_20_pc_%": "Current measurement: 4 - 20 mA (0..100%)", "ampere_4_20_mA": "Current measurement: 4 - 20 mA", "3wire_sens_0_14k_kohm": "3 Wire sensing: 0 - 14 kOhm", "4wire_sens_0_14k_kohm": "4 Wire sensing: 0 - 14 kOhm" }, "dpRanges": { "interval_30s": "30 seconds", "interval_20s": "20 seconds", "interval_15s": "15 seconds", "interval_10s": "10 seconds", "interval_5s": "5 seconds", "interval_1s": "1 second", "interval_syncpulse": "Synchronous-pulse", "interval_event": "Event-based", "interval_none": "-", "interval_1min": "1 minute", "interval_5min": "5 minutes", "interval_10min": "10 minutes", "interval_15min": "15 minutes", "interval_30min": "30 minutes", "interval_1h": "1 hour", "interval_2h": "2 hours", "interval_4h": "4 hours", "interval_6h": "6 hours", "interval_12h": "12 hours", "interval_daily": "Daily", "interval_weekly": "Weekly", "interval_monthly": "Monthly", "interval_quarterly": "Quarter yearly", "interval_semiannual": "Half yearly", "interval_yearly": "Yearly" } }