@mdf.js/crash
Version:
MMS - API Crash - Enhanced error management library
381 lines • 18.8 kB
JavaScript
"use strict";
/**
* Copyright 2024 Mytra Control S.L. All rights reserved.
*
* Use of this source code is governed by an MIT-style license that can be found in the LICENSE file
* or at https://opensource.org/licenses/MIT.
*/
Object.defineProperty(exports, "__esModule", { value: true });
exports.HTTPCode = void 0;
/**
* Hypertext Transfer Protocol (HTTP) response status codes.
* {@link https://en.wikipedia.org/wiki/List_of_HTTP_status_codes}
*/
var HTTPCode;
(function (HTTPCode) {
/**
* The server has received the request headers and the client should proceed to send the request
* body (in the case of a request for which a body needs to be sent; for example, a POST
* request).
* Sending a large request body to a server after a request has been rejected for inappropriate
* headers would be inefficient.
* To have a server check the request's headers, a client must send Expect: 100-continue as a
* header in its initial request and receive a 100 Continue status code in response before
* sending the body. The response 417 Expectation Failed indicates the request should not be
* continued.
*/
HTTPCode[HTTPCode["CONTINUE"] = 100] = "CONTINUE";
/**
* The requester has asked the server to switch protocols and the server has agreed to do so.
*/
HTTPCode[HTTPCode["SWITCHING_PROTOCOLS"] = 101] = "SWITCHING_PROTOCOLS";
/**
* A WebDAV request may contain many sub-requests involving file operations, requiring a long
* time to complete the request.
* This code indicates that the server has received and is processing the request, but no
* response is available yet.
* This prevents the client from timing out and assuming the request was lost.
*/
HTTPCode[HTTPCode["PROCESSING"] = 102] = "PROCESSING";
/**
* Standard response for successful HTTP requests.
* The actual response will depend on the request method used.
* In a GET request, the response will contain an entity corresponding to the requested resource
* In a POST request, the response will contain an entity describing or containing the result of
* the action.
*/
HTTPCode[HTTPCode["OK"] = 200] = "OK";
/**
* The request has been fulfilled, resulting in the creation of a new resource.
*/
HTTPCode[HTTPCode["CREATED"] = 201] = "CREATED";
/**
* The request has been accepted for processing, but the processing has not been completed.
* The request might or might not be eventually acted upon, and may be disallowed when
* processing occurs.
*/
HTTPCode[HTTPCode["ACCEPTED"] = 202] = "ACCEPTED";
/**
* SINCE HTTP/1.1
* The server is a transforming proxy that received a 200 OK from its origin,
* but is returning a modified version of the origin's response.
*/
HTTPCode[HTTPCode["NON_AUTHORITATIVE_INFORMATION"] = 203] = "NON_AUTHORITATIVE_INFORMATION";
/**
* The server successfully processed the request and is not returning any content.
*/
HTTPCode[HTTPCode["NO_CONTENT"] = 204] = "NO_CONTENT";
/**
* The server successfully processed the request, but is not returning any content.
* Unlike a 204 response, this response requires that the requester reset the document view.
*/
HTTPCode[HTTPCode["RESET_CONTENT"] = 205] = "RESET_CONTENT";
/**
* The server is delivering only part of the resource (byte serving) due to a range header
* sent by the client.
* The range header is used by HTTP clients to enable resuming of interrupted downloads,
* or split a download into multiple simultaneous streams.
*/
HTTPCode[HTTPCode["PARTIAL_CONTENT"] = 206] = "PARTIAL_CONTENT";
/**
* The message body that follows is an XML message and can contain a number of separate response
* codes, depending on how many sub-requests were made.
*/
HTTPCode[HTTPCode["MULTI_STATUS"] = 207] = "MULTI_STATUS";
/**
* The members of a DAV binding have already been enumerated in a preceding part of the
* (multistatus) response, and are not being included again.
*/
HTTPCode[HTTPCode["ALREADY_REPORTED"] = 208] = "ALREADY_REPORTED";
/**
* The server has fulfilled a request for the resource, and the response is a representation of
* the result of one or more instance-manipulations applied to the current instance.
*/
HTTPCode[HTTPCode["IM_USED"] = 226] = "IM_USED";
/**
* Indicates multiple options for the resource from which the client may choose (via
* agent-driven content negotiation).
* For example, this code could be used to present multiple video format options, to list files
* with different filename extensions, or to suggest word-sense disambiguation.
*/
HTTPCode[HTTPCode["MULTIPLE_CHOICES"] = 300] = "MULTIPLE_CHOICES";
/**
* This and all future requests should be directed to the given URI.
*/
HTTPCode[HTTPCode["MOVED_PERMANENTLY"] = 301] = "MOVED_PERMANENTLY";
/**
* This is an example of industry practice contradicting the standard.
* The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect
* (the original describing phrase was "Moved Temporarily"), but popular browsers implemented
* 302 with the functionality of a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and
* 307 to distinguish between the two behaviours. However, some Web applications and frameworks
* use the 302 status code as if it were the 303.
*/
HTTPCode[HTTPCode["FOUND"] = 302] = "FOUND";
/**
* SINCE HTTP/1.1
* The response to the request can be found under another URI using a GET method.
* When received in response to a POST (or PUT/DELETE), the client should presume that
* the server has received the data and should issue a redirect with a separate GET message.
*/
HTTPCode[HTTPCode["SEE_OTHER"] = 303] = "SEE_OTHER";
/**
* Indicates that the resource has not been modified since the version specified by the request
* headers If-Modified-Since or If-None-Match.
* In such case, there is no need to retransmit the resource since the client still has a
* previously-downloaded copy.
*/
HTTPCode[HTTPCode["NOT_MODIFIED"] = 304] = "NOT_MODIFIED";
/**
* SINCE HTTP/1.1
* The requested resource is available only through a proxy, the address for which is provided
* in the response.
* Many HTTP clients (such as Mozilla and Internet Explorer) do not correctly handle responses
* with this status code, primarily for security reasons.
*/
HTTPCode[HTTPCode["USE_PROXY"] = 305] = "USE_PROXY";
/**
* No longer used. Originally meant "Subsequent requests should use the specified proxy."
*/
HTTPCode[HTTPCode["SWITCH_PROXY"] = 306] = "SWITCH_PROXY";
/**
* SINCE HTTP/1.1
* In this case, the request should be repeated with another URI; however, future requests
* should still use the original URI.
* In contrast to how 302 was historically implemented, the request method is not allowed to be
* changed when reissuing the original request.
* For example, a POST request should be repeated using another POST request.
*/
HTTPCode[HTTPCode["TEMPORARY_REDIRECT"] = 307] = "TEMPORARY_REDIRECT";
/**
* The request and all future requests should be repeated using another URI.
* 307 and 308 parallel the behaviors of 302 and 301, but do not allow the HTTP method to
* change.
* So, for example, submitting a form to a permanently redirected resource may continue
* smoothly.
*/
HTTPCode[HTTPCode["PERMANENT_REDIRECT"] = 308] = "PERMANENT_REDIRECT";
/**
* The server cannot or will not process the request due to an apparent client error (e.g.,
* malformed request syntax, too large size, invalid request message framing, or deceptive
* request routing).
*/
HTTPCode[HTTPCode["BAD_REQUEST"] = 400] = "BAD_REQUEST";
/**
* Similar to 403 Forbidden, but specifically for use when authentication is required and has
* failed or has not yet
* been provided. The response must include a WWW-Authenticate header field containing a
* challenge applicable to the requested resource. See Basic access authentication and Digest
* access authentication. 401 semantically means "unauthenticated",i.e. the user does not have
* the necessary credentials.
*/
HTTPCode[HTTPCode["UNAUTHORIZED"] = 401] = "UNAUTHORIZED";
/**
* Reserved for future use. The original intention was that this code might be used as part of
* some form of digital cash or micro payment scheme, but that has not happened, and this code
* is not usually used.
* Google Developers API uses this status if a particular developer has exceeded the daily limit
* on requests.
*/
HTTPCode[HTTPCode["PAYMENT_REQUIRED"] = 402] = "PAYMENT_REQUIRED";
/**
* The request was valid, but the server is refusing action.
* The user might not have the necessary permissions for a resource.
*/
HTTPCode[HTTPCode["FORBIDDEN"] = 403] = "FORBIDDEN";
/**
* The requested resource could not be found but may be available in the future.
* Subsequent requests by the client are permissible.
*/
HTTPCode[HTTPCode["NOT_FOUND"] = 404] = "NOT_FOUND";
/**
* A request method is not supported for the requested resource;
* for example, a GET request on a form that requires data to be presented via POST, or a PUT
* request on a read-only resource.
*/
HTTPCode[HTTPCode["METHOD_NOT_ALLOWED"] = 405] = "METHOD_NOT_ALLOWED";
/**
* The requested resource is capable of generating only content not acceptable according to the
* Accept headers sent in the request.
*/
HTTPCode[HTTPCode["NOT_ACCEPTABLE"] = 406] = "NOT_ACCEPTABLE";
/**
* The client must first authenticate itself with the proxy.
*/
HTTPCode[HTTPCode["PROXY_AUTHENTICATION_REQUIRED"] = 407] = "PROXY_AUTHENTICATION_REQUIRED";
/**
* The server timed out waiting for the request.
* According to HTTP specifications:
* "The client did not produce a request within the time that the server was prepared to wait.
* The client MAY repeat the request without modifications at any later time."
*/
HTTPCode[HTTPCode["REQUEST_TIMEOUT"] = 408] = "REQUEST_TIMEOUT";
/**
* Indicates that the request could not be processed because of conflict in the request,
* such as an edit conflict between multiple simultaneous updates.
*/
HTTPCode[HTTPCode["CONFLICT"] = 409] = "CONFLICT";
/**
* Indicates that the resource requested is no longer available and will not be available again.
* This should be used when a resource has been intentionally removed and the resource should be
* purged.
* Upon receiving a 410 status code, the client should not request the resource in the future.
* Clients such as search engines should remove the resource from their indices.
* Most use cases do not require clients and search engines to purge the resource, and a
* "404 Not Found" may be used instead.
*/
HTTPCode[HTTPCode["GONE"] = 410] = "GONE";
/**
* The request did not specify the length of its content, which is required by the requested
* resource.
*/
HTTPCode[HTTPCode["LENGTH_REQUIRED"] = 411] = "LENGTH_REQUIRED";
/**
* The server does not meet one of the preconditions that the requester put on the request.
*/
HTTPCode[HTTPCode["PRECONDITION_FAILED"] = 412] = "PRECONDITION_FAILED";
/**
* The request is larger than the server is willing or able to process. Previously called
* "Request Entity Too Large".
*/
HTTPCode[HTTPCode["PAYLOAD_TOO_LARGE"] = 413] = "PAYLOAD_TOO_LARGE";
/**
* The URI provided was too long for the server to process. Often the result of too much data
* being encoded as a query-string of a GET request, in which case it should be converted to a
* POST request.
* Called "Request-URI Too Long" previously.
*/
HTTPCode[HTTPCode["URI_TOO_LONG"] = 414] = "URI_TOO_LONG";
/**
* The request entity has a media type which the server or resource does not support.
* For example, the client uploads an image as image/svg+xml, but the server requires that
* images use a different format.
*/
HTTPCode[HTTPCode["UNSUPPORTED_MEDIA_TYPE"] = 415] = "UNSUPPORTED_MEDIA_TYPE";
/**
* The client has asked for a portion of the file (byte serving), but the server cannot supply
* that portion.
* For example, if the client asked for a part of the file that lies beyond the end of the file.
* Called "Requested Range Not Satisfiable" previously.
*/
HTTPCode[HTTPCode["RANGE_NOT_SATISFIABLE"] = 416] = "RANGE_NOT_SATISFIABLE";
/**
* The server cannot meet the requirements of the Expect request-header field.
*/
HTTPCode[HTTPCode["EXPECTATION_FAILED"] = 417] = "EXPECTATION_FAILED";
/**
* This code was defined in 1998 as one of the traditional IETF April Fools' jokes, in RFC 2324,
* Hyper Text Coffee Pot Control Protocol, and is not expected to be implemented by actual HTTP
* servers. The RFC specifies this code should be returned by teapots requested to brew coffee.
* This HTTP status is used as an Easter egg in some websites, including Google.com.
*/
HTTPCode[HTTPCode["I_AM_A_TEAPOT"] = 418] = "I_AM_A_TEAPOT";
/**
* The request was directed at a server that is not able to produce a response (for example
* because a connection reuse).
*/
HTTPCode[HTTPCode["MISDIRECTED_REQUEST"] = 421] = "MISDIRECTED_REQUEST";
/**
* The request was well-formed but was unable to be followed due to semantic errors.
*/
HTTPCode[HTTPCode["UNPROCESSABLE_ENTITY"] = 422] = "UNPROCESSABLE_ENTITY";
/**
* The resource that is being accessed is locked.
*/
HTTPCode[HTTPCode["LOCKED"] = 423] = "LOCKED";
/**
* The request failed due to failure of a previous request (e.g., a PROPPATCH).
*/
HTTPCode[HTTPCode["FAILED_DEPENDENCY"] = 424] = "FAILED_DEPENDENCY";
/**
* Indicates that the server is unwilling to risk processing a request that might be replayed.
*/
HTTPCode[HTTPCode["TOO_EARLY"] = 425] = "TOO_EARLY";
/**
* The client should switch to a different protocol such as TLS/1.0, given in the Upgrade
* header field.
*/
HTTPCode[HTTPCode["UPGRADE_REQUIRED"] = 426] = "UPGRADE_REQUIRED";
/**
* The origin server requires the request to be conditional.
* Intended to prevent "the 'lost update' problem, where a client
* GETs a resource's state, modifies it, and PUTs it back to the server,
* when meanwhile a third party has modified the state on the server, leading to a conflict."
*/
HTTPCode[HTTPCode["PRECONDITION_REQUIRED"] = 428] = "PRECONDITION_REQUIRED";
/**
* The user has sent too many requests in a given amount of time. Intended for use with
* rate-limiting schemes.
*/
HTTPCode[HTTPCode["TOO_MANY_REQUESTS"] = 429] = "TOO_MANY_REQUESTS";
/**
* The server is unwilling to process the request because either an individual header field,
* or all the header fields collectively, are too large.
*/
HTTPCode[HTTPCode["REQUEST_HEADER_FIELDS_TOO_LARGE"] = 431] = "REQUEST_HEADER_FIELDS_TOO_LARGE";
/**
* A server operator has received a legal demand to deny access to a resource or to a set of
* resources that includes the requested resource. The code 451 was chosen as a reference to
* the novel Fahrenheit 451.
*/
HTTPCode[HTTPCode["UNAVAILABLE_FOR_LEGAL_REASONS"] = 451] = "UNAVAILABLE_FOR_LEGAL_REASONS";
/**
* A generic error message, given when an unexpected condition was encountered and no more
* specific message is suitable.
*/
HTTPCode[HTTPCode["INTERNAL_SERVER_ERROR"] = 500] = "INTERNAL_SERVER_ERROR";
/**
* The server either does not recognize the request method, or it lacks the ability to fulfill
* the request.
* Usually this implies future availability (e.g., a new feature of a web-service API).
*/
HTTPCode[HTTPCode["NOT_IMPLEMENTED"] = 501] = "NOT_IMPLEMENTED";
/**
* The server was acting as a gateway or proxy and received an invalid response from the
* upstream server.
*/
HTTPCode[HTTPCode["BAD_GATEWAY"] = 502] = "BAD_GATEWAY";
/**
* The server is currently unavailable (because it is overloaded or down for maintenance).
* Generally, this is a temporary state.
*/
HTTPCode[HTTPCode["SERVICE_UNAVAILABLE"] = 503] = "SERVICE_UNAVAILABLE";
/**
* The server was acting as a gateway or proxy and did not receive a timely response from the
* upstream server.
*/
HTTPCode[HTTPCode["GATEWAY_TIMEOUT"] = 504] = "GATEWAY_TIMEOUT";
/**
* The server does not support the HTTP protocol version used in the request
*/
HTTPCode[HTTPCode["HTTP_VERSION_NOT_SUPPORTED"] = 505] = "HTTP_VERSION_NOT_SUPPORTED";
/**
* Transparent content negotiation for the request results in a circular reference.
*/
HTTPCode[HTTPCode["VARIANT_ALSO_NEGOTIATES"] = 506] = "VARIANT_ALSO_NEGOTIATES";
/**
* The server is unable to store the representation needed to complete the request.
*/
HTTPCode[HTTPCode["INSUFFICIENT_STORAGE"] = 507] = "INSUFFICIENT_STORAGE";
/**
* The server detected an infinite loop while processing the request.
*/
HTTPCode[HTTPCode["LOOP_DETECTED"] = 508] = "LOOP_DETECTED";
/**
* The server has exceeded the bandwidth specified by the server administrator; this is often
* used by shared hosting providers to limit the bandwidth of customers.
*/
HTTPCode[HTTPCode["BANDWIDTH_LIMIT_EXCEEDED"] = 509] = "BANDWIDTH_LIMIT_EXCEEDED";
/**
* Further extensions to the request are required for the server to fulfill it.
*/
HTTPCode[HTTPCode["NOT_EXTENDED"] = 510] = "NOT_EXTENDED";
/**
* The client needs to authenticate to gain network access.
* Intended for use by intercepting proxies used to control access to the network
* (e.g., "captive portals" used to require agreement to Terms of Service before granting full
* Internet access via a Wi-Fi hotspot).
*/
HTTPCode[HTTPCode["NETWORK_AUTHENTICATION_REQUIRED"] = 511] = "NETWORK_AUTHENTICATION_REQUIRED";
})(HTTPCode || (exports.HTTPCode = HTTPCode = {}));
//# sourceMappingURL=HTTPCode.t.js.map