UNPKG

@marcel-domke/node-red-contrib-reolink

Version:

A unofficial Node-RED node for receiving real-time data and controlling your Reolink camera.

github.com/marcel-domke/node-red-contrib-reolink

marcel-domke/node-red-contrib-reolink

56 lines (34 loc) • 2.07 kB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
# Reolink Integration for Node-RED An unofficial Node-RED integration for Reolink cameras that allows you to receive motion detection and AI events, trigger alarms, and control the integrated LED or siren. ## Usage ### Configuration Node The **Reolink Device** node allows you to configure the connection to your Reolink camera and share it between the nodes. ### Nodes 1. **Reolink AI Event Node** This node queries the AI events from the Reolink camera (e.g., person recognition, vehicle detection). 2. **Reolink Motion Detection Node** This node receives motion detection events from the camera. 3. **Reolink Doorbell Event Node** This node queries various events from a Reolink doorbell. 4. **Reolink Alarm Node** This node triggers an alarm on the camera. 5. **Reolink Siren Node** This node controls and monitors the state of the audio alarm (siren) on the camera. If activated the siren will sound when motion is detected. 6. **Reolink LED Control Node** This node controls the white LED light of the camera and queries its status. 7. **Reolink IR Light Node** This node allows you to control and monitor the mode of the IR (infrared) LED light on a Reolink device. 8. **Reolink PTZ Patrol Node** This node allows you to control the PTZ (Pan-Tilt-Zoom) patrol function on a Reolink device. When activated, the camera will follow a pre-configured patrol pattern. 9. **Reolink PTZ Preset Node** This node controls and queries the PTZ (Pan-Tilt-Zoom) preset positions on a Reolink device. You can either set the camera to a specific preset position or retrieve a list of available preset positions from the device. ## Compatibility Tested with the following Reolink cameras: - Reolink RLC-823S2 - Reolink RLC-1224A - Reolink CX410 - Reolink CX810 (by k5map) - Reolink Doorbell (by martin-g-it) But this integration should work with all Reolink cameras that support the HTTP / HTTPS API. ## License This project is licensed under the Apache 2.0 License. See the [LICENSE](LICENSE) file for details.