UNPKG

@kvaser/canking-api

Version:

CanKing API to communicate with the CanKing service using Node.js.

79 lines (45 loc) • 1.56 kB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
[**Kvaser CanKing GUI Extensions SDK v7.5.1**](../../README.md) *** [Kvaser CanKing GUI Extensions SDK](../../modules.md) / [models](../README.md) / CanBusParams # Interface: CanBusParams CanBusParams is used for getting the channels bus params capacity and it can be used for setting up a correct bus speed configuration for a specific CAN channel. Constraints that must be fulfilled when opening channel in classic CAN Mode: tq = 1 + prop + phase1 + phase2 tq >= 3 sjw <= min(phase1, phase2) prescaler >= 1 Constraints that must be fulfilled when opening channel in CAN FD Mode: arbitration.tq = 1 + arbitration.prop + arbitration.phase1 + arbitration.phase2 arbitration.tq >= 3 arbitration.sjw <= min(arbitration.phase1, arbitration.phase2) arbitration.prescaler >= 1 (<=2 will enable Transmitter Delay Compensation Mechanism) data.tq = 1 + data.phase1 + data.phase2 data.tq >= 3 data.sjw <= min(data.phase1, data.phase2) data.prop = 0 data.prescaler = arbitration.prescaler ## Properties ### phase1 > **phase1**: `number` The number of time quantas in phase 1. *** ### phase2 > **phase2**: `number` The number of time quantas in phase 2. *** ### prescaler > **prescaler**: `number` The prescaler value. *** ### prop > **prop**: `number` The propagation segment in time quantas. *** ### sjw > **sjw**: `number` The synchronization jump width in time quantas. *** ### tq > **tq**: `number` The total number of time quantas (TQ).