@kamino-finance/klend-sdk

import { PublicKey } from "@solana/web3.js" // eslint-disable-line @typescript-eslint/no-unused-vars import BN from "bn.js" // eslint-disable-line @typescript-eslint/no-unused-vars import * as types from "../types" // eslint-disable-line @typescript-eslint/no-unused-vars import * as borsh from "@coral-xyz/borsh" export interface ReserveConfigFields { /** Status of the reserve Active/Obsolete/Hidden */ status: number /** Asset tier -> 0 - regular (collateral & debt), 1 - isolated collateral, 2 - isolated debt */ assetTier: number /** Flat rate that goes to the host */ hostFixedInterestRateBps: number /** * [DEPRECATED] Space that used to hold 2 fields: * - Boost for side (debt or collateral) * - Reward points multiplier per obligation type * Can be re-used after making sure all underlying production account data is zeroed. */ reserved2: Array<number> /** Cut of the order execution bonus that the protocol receives, as a percentage */ protocolOrderExecutionFeePct: number /** Protocol take rate is the amount borrowed interest protocol receives, as a percentage */ protocolTakeRatePct: number /** Cut of the liquidation bonus that the protocol receives, as a percentage */ protocolLiquidationFeePct: number /** * Target ratio of the value of borrows to deposits, as a percentage * 0 if use as collateral is disabled */ loanToValuePct: number /** Loan to value ratio at which an obligation can be liquidated, as percentage */ liquidationThresholdPct: number /** Minimum bonus a liquidator receives when repaying part of an unhealthy obligation, as bps */ minLiquidationBonusBps: number /** Maximum bonus a liquidator receives when repaying part of an unhealthy obligation, as bps */ maxLiquidationBonusBps: number /** Bad debt liquidation bonus for an undercollateralized obligation, as bps */ badDebtLiquidationBonusBps: number /** * Time in seconds that must pass before redemptions are enabled after the deposit limit is * crossed. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ deleveragingMarginCallPeriodSecs: BN /** * The rate at which the deleveraging threshold decreases, in bps per day. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ deleveragingThresholdDecreaseBpsPerDay: BN /** Program owner fees assessed, separate from gains due to interest accrual */ fees: types.ReserveFeesFields /** Borrow rate curve based on utilization */ borrowRateCurve: types.BorrowRateCurveFields /** Borrow factor in percentage - used for risk adjustment */ borrowFactorPct: BN /** Maximum deposit limit of liquidity in native units, u64::MAX for inf */ depositLimit: BN /** Maximum amount borrowed, u64::MAX for inf, 0 to disable borrows (protected deposits) */ borrowLimit: BN /** Token id from TokenInfos struct */ tokenInfo: types.TokenInfoFields /** Deposit withdrawal caps - deposit & redeem */ depositWithdrawalCap: types.WithdrawalCapsFields /** Debt withdrawal caps - borrow & repay */ debtWithdrawalCap: types.WithdrawalCapsFields elevationGroups: Array<number> disableUsageAsCollOutsideEmode: number /** Utilization (in percentage) above which borrowing is blocked. 0 to disable. */ utilizationLimitBlockBorrowingAbovePct: number /** * Whether this reserve should be subject to auto-deleveraging after deposit or borrow limit is * crossed. * Besides this flag, the lending market's flag also needs to be enabled (logical `AND`). * **NOTE:** the manual "target LTV" deleveraging (enabled by the risk council for individual * obligations) is NOT affected by this flag. */ autodeleverageEnabled: number reserved1: Array<number> /** * Maximum amount liquidity of this reserve borrowed outside all elevation groups * - u64::MAX for inf * - 0 to disable borrows outside elevation groups */ borrowLimitOutsideElevationGroup: BN /** * Defines the maximum amount (in lamports of elevation group debt asset) * that can be borrowed when this reserve is used as collateral. * - u64::MAX for inf * - 0 to disable borrows in this elevation group (expected value for the debt asset) */ borrowLimitAgainstThisCollateralInElevationGroup: Array<BN> /** * The rate at which the deleveraging-related liquidation bonus increases, in bps per day. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ deleveragingBonusIncreaseBpsPerDay: BN } export interface ReserveConfigJSON { /** Status of the reserve Active/Obsolete/Hidden */ status: number /** Asset tier -> 0 - regular (collateral & debt), 1 - isolated collateral, 2 - isolated debt */ assetTier: number /** Flat rate that goes to the host */ hostFixedInterestRateBps: number /** * [DEPRECATED] Space that used to hold 2 fields: * - Boost for side (debt or collateral) * - Reward points multiplier per obligation type * Can be re-used after making sure all underlying production account data is zeroed. */ reserved2: Array<number> /** Cut of the order execution bonus that the protocol receives, as a percentage */ protocolOrderExecutionFeePct: number /** Protocol take rate is the amount borrowed interest protocol receives, as a percentage */ protocolTakeRatePct: number /** Cut of the liquidation bonus that the protocol receives, as a percentage */ protocolLiquidationFeePct: number /** * Target ratio of the value of borrows to deposits, as a percentage * 0 if use as collateral is disabled */ loanToValuePct: number /** Loan to value ratio at which an obligation can be liquidated, as percentage */ liquidationThresholdPct: number /** Minimum bonus a liquidator receives when repaying part of an unhealthy obligation, as bps */ minLiquidationBonusBps: number /** Maximum bonus a liquidator receives when repaying part of an unhealthy obligation, as bps */ maxLiquidationBonusBps: number /** Bad debt liquidation bonus for an undercollateralized obligation, as bps */ badDebtLiquidationBonusBps: number /** * Time in seconds that must pass before redemptions are enabled after the deposit limit is * crossed. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ deleveragingMarginCallPeriodSecs: string /** * The rate at which the deleveraging threshold decreases, in bps per day. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ deleveragingThresholdDecreaseBpsPerDay: string /** Program owner fees assessed, separate from gains due to interest accrual */ fees: types.ReserveFeesJSON /** Borrow rate curve based on utilization */ borrowRateCurve: types.BorrowRateCurveJSON /** Borrow factor in percentage - used for risk adjustment */ borrowFactorPct: string /** Maximum deposit limit of liquidity in native units, u64::MAX for inf */ depositLimit: string /** Maximum amount borrowed, u64::MAX for inf, 0 to disable borrows (protected deposits) */ borrowLimit: string /** Token id from TokenInfos struct */ tokenInfo: types.TokenInfoJSON /** Deposit withdrawal caps - deposit & redeem */ depositWithdrawalCap: types.WithdrawalCapsJSON /** Debt withdrawal caps - borrow & repay */ debtWithdrawalCap: types.WithdrawalCapsJSON elevationGroups: Array<number> disableUsageAsCollOutsideEmode: number /** Utilization (in percentage) above which borrowing is blocked. 0 to disable. */ utilizationLimitBlockBorrowingAbovePct: number /** * Whether this reserve should be subject to auto-deleveraging after deposit or borrow limit is * crossed. * Besides this flag, the lending market's flag also needs to be enabled (logical `AND`). * **NOTE:** the manual "target LTV" deleveraging (enabled by the risk council for individual * obligations) is NOT affected by this flag. */ autodeleverageEnabled: number reserved1: Array<number> /** * Maximum amount liquidity of this reserve borrowed outside all elevation groups * - u64::MAX for inf * - 0 to disable borrows outside elevation groups */ borrowLimitOutsideElevationGroup: string /** * Defines the maximum amount (in lamports of elevation group debt asset) * that can be borrowed when this reserve is used as collateral. * - u64::MAX for inf * - 0 to disable borrows in this elevation group (expected value for the debt asset) */ borrowLimitAgainstThisCollateralInElevationGroup: Array<string> /** * The rate at which the deleveraging-related liquidation bonus increases, in bps per day. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ deleveragingBonusIncreaseBpsPerDay: string } /** Reserve configuration values */ export class ReserveConfig { /** Status of the reserve Active/Obsolete/Hidden */ readonly status: number /** Asset tier -> 0 - regular (collateral & debt), 1 - isolated collateral, 2 - isolated debt */ readonly assetTier: number /** Flat rate that goes to the host */ readonly hostFixedInterestRateBps: number /** * [DEPRECATED] Space that used to hold 2 fields: * - Boost for side (debt or collateral) * - Reward points multiplier per obligation type * Can be re-used after making sure all underlying production account data is zeroed. */ readonly reserved2: Array<number> /** Cut of the order execution bonus that the protocol receives, as a percentage */ readonly protocolOrderExecutionFeePct: number /** Protocol take rate is the amount borrowed interest protocol receives, as a percentage */ readonly protocolTakeRatePct: number /** Cut of the liquidation bonus that the protocol receives, as a percentage */ readonly protocolLiquidationFeePct: number /** * Target ratio of the value of borrows to deposits, as a percentage * 0 if use as collateral is disabled */ readonly loanToValuePct: number /** Loan to value ratio at which an obligation can be liquidated, as percentage */ readonly liquidationThresholdPct: number /** Minimum bonus a liquidator receives when repaying part of an unhealthy obligation, as bps */ readonly minLiquidationBonusBps: number /** Maximum bonus a liquidator receives when repaying part of an unhealthy obligation, as bps */ readonly maxLiquidationBonusBps: number /** Bad debt liquidation bonus for an undercollateralized obligation, as bps */ readonly badDebtLiquidationBonusBps: number /** * Time in seconds that must pass before redemptions are enabled after the deposit limit is * crossed. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ readonly deleveragingMarginCallPeriodSecs: BN /** * The rate at which the deleveraging threshold decreases, in bps per day. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ readonly deleveragingThresholdDecreaseBpsPerDay: BN /** Program owner fees assessed, separate from gains due to interest accrual */ readonly fees: types.ReserveFees /** Borrow rate curve based on utilization */ readonly borrowRateCurve: types.BorrowRateCurve /** Borrow factor in percentage - used for risk adjustment */ readonly borrowFactorPct: BN /** Maximum deposit limit of liquidity in native units, u64::MAX for inf */ readonly depositLimit: BN /** Maximum amount borrowed, u64::MAX for inf, 0 to disable borrows (protected deposits) */ readonly borrowLimit: BN /** Token id from TokenInfos struct */ readonly tokenInfo: types.TokenInfo /** Deposit withdrawal caps - deposit & redeem */ readonly depositWithdrawalCap: types.WithdrawalCaps /** Debt withdrawal caps - borrow & repay */ readonly debtWithdrawalCap: types.WithdrawalCaps readonly elevationGroups: Array<number> readonly disableUsageAsCollOutsideEmode: number /** Utilization (in percentage) above which borrowing is blocked. 0 to disable. */ readonly utilizationLimitBlockBorrowingAbovePct: number /** * Whether this reserve should be subject to auto-deleveraging after deposit or borrow limit is * crossed. * Besides this flag, the lending market's flag also needs to be enabled (logical `AND`). * **NOTE:** the manual "target LTV" deleveraging (enabled by the risk council for individual * obligations) is NOT affected by this flag. */ readonly autodeleverageEnabled: number readonly reserved1: Array<number> /** * Maximum amount liquidity of this reserve borrowed outside all elevation groups * - u64::MAX for inf * - 0 to disable borrows outside elevation groups */ readonly borrowLimitOutsideElevationGroup: BN /** * Defines the maximum amount (in lamports of elevation group debt asset) * that can be borrowed when this reserve is used as collateral. * - u64::MAX for inf * - 0 to disable borrows in this elevation group (expected value for the debt asset) */ readonly borrowLimitAgainstThisCollateralInElevationGroup: Array<BN> /** * The rate at which the deleveraging-related liquidation bonus increases, in bps per day. * Only relevant when `autodeleverage_enabled == 1`, and must not be 0 in such case. */ readonly deleveragingBonusIncreaseBpsPerDay: BN constructor(fields: ReserveConfigFields) { this.status = fields.status this.assetTier = fields.assetTier this.hostFixedInterestRateBps = fields.hostFixedInterestRateBps this.reserved2 = fields.reserved2 this.protocolOrderExecutionFeePct = fields.protocolOrderExecutionFeePct this.protocolTakeRatePct = fields.protocolTakeRatePct this.protocolLiquidationFeePct = fields.protocolLiquidationFeePct this.loanToValuePct = fields.loanToValuePct this.liquidationThresholdPct = fields.liquidationThresholdPct this.minLiquidationBonusBps = fields.minLiquidationBonusBps this.maxLiquidationBonusBps = fields.maxLiquidationBonusBps this.badDebtLiquidationBonusBps = fields.badDebtLiquidationBonusBps this.deleveragingMarginCallPeriodSecs = fields.deleveragingMarginCallPeriodSecs this.deleveragingThresholdDecreaseBpsPerDay = fields.deleveragingThresholdDecreaseBpsPerDay this.fees = new types.ReserveFees({ ...fields.fees }) this.borrowRateCurve = new types.BorrowRateCurve({ ...fields.borrowRateCurve, }) this.borrowFactorPct = fields.borrowFactorPct this.depositLimit = fields.depositLimit this.borrowLimit = fields.borrowLimit this.tokenInfo = new types.TokenInfo({ ...fields.tokenInfo }) this.depositWithdrawalCap = new types.WithdrawalCaps({ ...fields.depositWithdrawalCap, }) this.debtWithdrawalCap = new types.WithdrawalCaps({ ...fields.debtWithdrawalCap, }) this.elevationGroups = fields.elevationGroups this.disableUsageAsCollOutsideEmode = fields.disableUsageAsCollOutsideEmode this.utilizationLimitBlockBorrowingAbovePct = fields.utilizationLimitBlockBorrowingAbovePct this.autodeleverageEnabled = fields.autodeleverageEnabled this.reserved1 = fields.reserved1 this.borrowLimitOutsideElevationGroup = fields.borrowLimitOutsideElevationGroup this.borrowLimitAgainstThisCollateralInElevationGroup = fields.borrowLimitAgainstThisCollateralInElevationGroup this.deleveragingBonusIncreaseBpsPerDay = fields.deleveragingBonusIncreaseBpsPerDay } static layout(property?: string) { return borsh.struct( [ borsh.u8("status"), borsh.u8("assetTier"), borsh.u16("hostFixedInterestRateBps"), borsh.array(borsh.u8(), 9, "reserved2"), borsh.u8("protocolOrderExecutionFeePct"), borsh.u8("protocolTakeRatePct"), borsh.u8("protocolLiquidationFeePct"), borsh.u8("loanToValuePct"), borsh.u8("liquidationThresholdPct"), borsh.u16("minLiquidationBonusBps"), borsh.u16("maxLiquidationBonusBps"), borsh.u16("badDebtLiquidationBonusBps"), borsh.u64("deleveragingMarginCallPeriodSecs"), borsh.u64("deleveragingThresholdDecreaseBpsPerDay"), types.ReserveFees.layout("fees"), types.BorrowRateCurve.layout("borrowRateCurve"), borsh.u64("borrowFactorPct"), borsh.u64("depositLimit"), borsh.u64("borrowLimit"), types.TokenInfo.layout("tokenInfo"), types.WithdrawalCaps.layout("depositWithdrawalCap"), types.WithdrawalCaps.layout("debtWithdrawalCap"), borsh.array(borsh.u8(), 20, "elevationGroups"), borsh.u8("disableUsageAsCollOutsideEmode"), borsh.u8("utilizationLimitBlockBorrowingAbovePct"), borsh.u8("autodeleverageEnabled"), borsh.array(borsh.u8(), 1, "reserved1"), borsh.u64("borrowLimitOutsideElevationGroup"), borsh.array( borsh.u64(), 32, "borrowLimitAgainstThisCollateralInElevationGroup" ), borsh.u64("deleveragingBonusIncreaseBpsPerDay"), ], property ) } // eslint-disable-next-line @typescript-eslint/no-explicit-any static fromDecoded(obj: any) { return new ReserveConfig({ status: obj.status, assetTier: obj.assetTier, hostFixedInterestRateBps: obj.hostFixedInterestRateBps, reserved2: obj.reserved2, protocolOrderExecutionFeePct: obj.protocolOrderExecutionFeePct, protocolTakeRatePct: obj.protocolTakeRatePct, protocolLiquidationFeePct: obj.protocolLiquidationFeePct, loanToValuePct: obj.loanToValuePct, liquidationThresholdPct: obj.liquidationThresholdPct, minLiquidationBonusBps: obj.minLiquidationBonusBps, maxLiquidationBonusBps: obj.maxLiquidationBonusBps, badDebtLiquidationBonusBps: obj.badDebtLiquidationBonusBps, deleveragingMarginCallPeriodSecs: obj.deleveragingMarginCallPeriodSecs, deleveragingThresholdDecreaseBpsPerDay: obj.deleveragingThresholdDecreaseBpsPerDay, fees: types.ReserveFees.fromDecoded(obj.fees), borrowRateCurve: types.BorrowRateCurve.fromDecoded(obj.borrowRateCurve), borrowFactorPct: obj.borrowFactorPct, depositLimit: obj.depositLimit, borrowLimit: obj.borrowLimit, tokenInfo: types.TokenInfo.fromDecoded(obj.tokenInfo), depositWithdrawalCap: types.WithdrawalCaps.fromDecoded( obj.depositWithdrawalCap ), debtWithdrawalCap: types.WithdrawalCaps.fromDecoded( obj.debtWithdrawalCap ), elevationGroups: obj.elevationGroups, disableUsageAsCollOutsideEmode: obj.disableUsageAsCollOutsideEmode, utilizationLimitBlockBorrowingAbovePct: obj.utilizationLimitBlockBorrowingAbovePct, autodeleverageEnabled: obj.autodeleverageEnabled, reserved1: obj.reserved1, borrowLimitOutsideElevationGroup: obj.borrowLimitOutsideElevationGroup, borrowLimitAgainstThisCollateralInElevationGroup: obj.borrowLimitAgainstThisCollateralInElevationGroup, deleveragingBonusIncreaseBpsPerDay: obj.deleveragingBonusIncreaseBpsPerDay, }) } static toEncodable(fields: ReserveConfigFields) { return { status: fields.status, assetTier: fields.assetTier, hostFixedInterestRateBps: fields.hostFixedInterestRateBps, reserved2: fields.reserved2, protocolOrderExecutionFeePct: fields.protocolOrderExecutionFeePct, protocolTakeRatePct: fields.protocolTakeRatePct, protocolLiquidationFeePct: fields.protocolLiquidationFeePct, loanToValuePct: fields.loanToValuePct, liquidationThresholdPct: fields.liquidationThresholdPct, minLiquidationBonusBps: fields.minLiquidationBonusBps, maxLiquidationBonusBps: fields.maxLiquidationBonusBps, badDebtLiquidationBonusBps: fields.badDebtLiquidationBonusBps, deleveragingMarginCallPeriodSecs: fields.deleveragingMarginCallPeriodSecs, deleveragingThresholdDecreaseBpsPerDay: fields.deleveragingThresholdDecreaseBpsPerDay, fees: types.ReserveFees.toEncodable(fields.fees), borrowRateCurve: types.BorrowRateCurve.toEncodable( fields.borrowRateCurve ), borrowFactorPct: fields.borrowFactorPct, depositLimit: fields.depositLimit, borrowLimit: fields.borrowLimit, tokenInfo: types.TokenInfo.toEncodable(fields.tokenInfo), depositWithdrawalCap: types.WithdrawalCaps.toEncodable( fields.depositWithdrawalCap ), debtWithdrawalCap: types.WithdrawalCaps.toEncodable( fields.debtWithdrawalCap ), elevationGroups: fields.elevationGroups, disableUsageAsCollOutsideEmode: fields.disableUsageAsCollOutsideEmode, utilizationLimitBlockBorrowingAbovePct: fields.utilizationLimitBlockBorrowingAbovePct, autodeleverageEnabled: fields.autodeleverageEnabled, reserved1: fields.reserved1, borrowLimitOutsideElevationGroup: fields.borrowLimitOutsideElevationGroup, borrowLimitAgainstThisCollateralInElevationGroup: fields.borrowLimitAgainstThisCollateralInElevationGroup, deleveragingBonusIncreaseBpsPerDay: fields.deleveragingBonusIncreaseBpsPerDay, } } toJSON(): ReserveConfigJSON { return { status: this.status, assetTier: this.assetTier, hostFixedInterestRateBps: this.hostFixedInterestRateBps, reserved2: this.reserved2, protocolOrderExecutionFeePct: this.protocolOrderExecutionFeePct, protocolTakeRatePct: this.protocolTakeRatePct, protocolLiquidationFeePct: this.protocolLiquidationFeePct, loanToValuePct: this.loanToValuePct, liquidationThresholdPct: this.liquidationThresholdPct, minLiquidationBonusBps: this.minLiquidationBonusBps, maxLiquidationBonusBps: this.maxLiquidationBonusBps, badDebtLiquidationBonusBps: this.badDebtLiquidationBonusBps, deleveragingMarginCallPeriodSecs: this.deleveragingMarginCallPeriodSecs.toString(), deleveragingThresholdDecreaseBpsPerDay: this.deleveragingThresholdDecreaseBpsPerDay.toString(), fees: this.fees.toJSON(), borrowRateCurve: this.borrowRateCurve.toJSON(), borrowFactorPct: this.borrowFactorPct.toString(), depositLimit: this.depositLimit.toString(), borrowLimit: this.borrowLimit.toString(), tokenInfo: this.tokenInfo.toJSON(), depositWithdrawalCap: this.depositWithdrawalCap.toJSON(), debtWithdrawalCap: this.debtWithdrawalCap.toJSON(), elevationGroups: this.elevationGroups, disableUsageAsCollOutsideEmode: this.disableUsageAsCollOutsideEmode, utilizationLimitBlockBorrowingAbovePct: this.utilizationLimitBlockBorrowingAbovePct, autodeleverageEnabled: this.autodeleverageEnabled, reserved1: this.reserved1, borrowLimitOutsideElevationGroup: this.borrowLimitOutsideElevationGroup.toString(), borrowLimitAgainstThisCollateralInElevationGroup: this.borrowLimitAgainstThisCollateralInElevationGroup.map((item) => item.toString() ), deleveragingBonusIncreaseBpsPerDay: this.deleveragingBonusIncreaseBpsPerDay.toString(), } } static fromJSON(obj: ReserveConfigJSON): ReserveConfig { return new ReserveConfig({ status: obj.status, assetTier: obj.assetTier, hostFixedInterestRateBps: obj.hostFixedInterestRateBps, reserved2: obj.reserved2, protocolOrderExecutionFeePct: obj.protocolOrderExecutionFeePct, protocolTakeRatePct: obj.protocolTakeRatePct, protocolLiquidationFeePct: obj.protocolLiquidationFeePct, loanToValuePct: obj.loanToValuePct, liquidationThresholdPct: obj.liquidationThresholdPct, minLiquidationBonusBps: obj.minLiquidationBonusBps, maxLiquidationBonusBps: obj.maxLiquidationBonusBps, badDebtLiquidationBonusBps: obj.badDebtLiquidationBonusBps, deleveragingMarginCallPeriodSecs: new BN( obj.deleveragingMarginCallPeriodSecs ), deleveragingThresholdDecreaseBpsPerDay: new BN( obj.deleveragingThresholdDecreaseBpsPerDay ), fees: types.ReserveFees.fromJSON(obj.fees), borrowRateCurve: types.BorrowRateCurve.fromJSON(obj.borrowRateCurve), borrowFactorPct: new BN(obj.borrowFactorPct), depositLimit: new BN(obj.depositLimit), borrowLimit: new BN(obj.borrowLimit), tokenInfo: types.TokenInfo.fromJSON(obj.tokenInfo), depositWithdrawalCap: types.WithdrawalCaps.fromJSON( obj.depositWithdrawalCap ), debtWithdrawalCap: types.WithdrawalCaps.fromJSON(obj.debtWithdrawalCap), elevationGroups: obj.elevationGroups, disableUsageAsCollOutsideEmode: obj.disableUsageAsCollOutsideEmode, utilizationLimitBlockBorrowingAbovePct: obj.utilizationLimitBlockBorrowingAbovePct, autodeleverageEnabled: obj.autodeleverageEnabled, reserved1: obj.reserved1, borrowLimitOutsideElevationGroup: new BN( obj.borrowLimitOutsideElevationGroup ), borrowLimitAgainstThisCollateralInElevationGroup: obj.borrowLimitAgainstThisCollateralInElevationGroup.map( (item) => new BN(item) ), deleveragingBonusIncreaseBpsPerDay: new BN( obj.deleveragingBonusIncreaseBpsPerDay ), }) } toEncodable() { return ReserveConfig.toEncodable(this) } }