@javatypes/amqp-client

declare namespace com { namespace rabbitmq { namespace client { /** * Convenience factory class to facilitate opening a {@link Connection} to a RabbitMQ node. * Most connection and socket settings are configured using this factory. * Some settings that apply to connections can also be configured here * and will apply to all connections produced by this factory. */ // @ts-ignore class ConnectionFactory extends java.lang.Object implements java.lang.Cloneable { // @ts-ignore constructor() /** * Default user name */ // @ts-ignore public static readonly DEFAULT_USER: java.lang.String | string /** * Default password */ // @ts-ignore public static readonly DEFAULT_PASS: java.lang.String | string /** * Default virtual host */ // @ts-ignore public static readonly DEFAULT_VHOST: java.lang.String | string /** * Default maximum channel number; * 2047 because it's 2048 on the server side minus channel 0, * which each connection uses for negotiation * and error communication */ // @ts-ignore public static readonly DEFAULT_CHANNEL_MAX: number /*int*/ /** * Default maximum frame size; * zero means no limit */ // @ts-ignore public static readonly DEFAULT_FRAME_MAX: number /*int*/ /** * Default heart-beat interval; * 60 seconds */ // @ts-ignore public static readonly DEFAULT_HEARTBEAT: number /*int*/ /** * The default host */ // @ts-ignore public static readonly DEFAULT_HOST: java.lang.String | string /** * 'Use the default port' port */ // @ts-ignore public static readonly USE_DEFAULT_PORT: number /*int*/ /** * The default non-ssl port */ // @ts-ignore public static readonly DEFAULT_AMQP_PORT: number /*int*/ /** * The default ssl port */ // @ts-ignore public static readonly DEFAULT_AMQP_OVER_SSL_PORT: number /*int*/ /** * The default TCP connection timeout: 60 seconds */ // @ts-ignore public static readonly DEFAULT_CONNECTION_TIMEOUT: number /*int*/ /** * The default AMQP 0-9-1 connection handshake timeout. See DEFAULT_CONNECTION_TIMEOUT * for TCP (socket) connection timeout. */ // @ts-ignore public static readonly DEFAULT_HANDSHAKE_TIMEOUT: number /*int*/ /** * The default shutdown timeout; * zero means wait indefinitely */ // @ts-ignore public static readonly DEFAULT_SHUTDOWN_TIMEOUT: number /*int*/ /** * The default continuation timeout for RPC calls in channels: 10 minutes */ // @ts-ignore public static readonly DEFAULT_CHANNEL_RPC_TIMEOUT: number /*int*/ /** * The default network recovery interval: 5000 millis */ // @ts-ignore public static readonly DEFAULT_NETWORK_RECOVERY_INTERVAL: number /*long*/ /** * The default timeout for work pool enqueueing: no timeout */ // @ts-ignore public static readonly DEFAULT_WORK_POOL_TIMEOUT: number /*int*/ /** * @return the default host to use for connections */ // @ts-ignore public getHost(): string /** * @param host the default host to use for connections */ // @ts-ignore public setHost(host: java.lang.String | string): void // @ts-ignore public static portOrDefault(port: number /*int*/, ssl: boolean): number /*int*/ /** * @return the default port to use for connections */ // @ts-ignore public getPort(): number /*int*/ /** * Set the target port. * @param port the default port to use for connections */ // @ts-ignore public setPort(port: number /*int*/): void /** * Retrieve the user name. * @return the AMQP user name to use when connecting to the broker */ // @ts-ignore public getUsername(): string /** * Set the user name. * @param username the AMQP user name to use when connecting to the broker */ // @ts-ignore public setUsername(username: java.lang.String | string): void /** * Retrieve the password. * @return the password to use when connecting to the broker */ // @ts-ignore public getPassword(): string /** * Set the password. * @param password the password to use when connecting to the broker */ // @ts-ignore public setPassword(password: java.lang.String | string): void /** * Set a custom credentials provider. * Default implementation uses static username and password. * @param credentialsProvider The custom implementation of CredentialsProvider to use when connecting to the broker. * @see com.rabbitmq.client.impl.DefaultCredentialsProvider * @since 4.5.0 */ // @ts-ignore public setCredentialsProvider(credentialsProvider: com.rabbitmq.client.impl.CredentialsProvider): void /** * Retrieve the virtual host. * @return the virtual host to use when connecting to the broker */ // @ts-ignore public getVirtualHost(): string /** * Set the virtual host. * @param virtualHost the virtual host to use when connecting to the broker */ // @ts-ignore public setVirtualHost(virtualHost: java.lang.String | string): void /** * Convenience method for setting the fields in an AMQP URI: host, * port, username, password and virtual host. If any part of the * URI is omitted, the ConnectionFactory's corresponding variable * is left unchanged. * @param uri is the AMQP URI containing the data */ // @ts-ignore public setUri(uri: java.net.URI): void /** * Convenience method for setting the fields in an AMQP URI: host, * port, username, password and virtual host. If any part of the * URI is omitted, the ConnectionFactory's corresponding variable * is left unchanged. Note that not all valid AMQP URIs are * accepted; in particular, the hostname must be given if the * port, username or password are given, and escapes in the * hostname are not permitted. * @param uriString is the AMQP URI containing the data */ // @ts-ignore public setUri(uriString: java.lang.String | string): void /** * Retrieve the requested maximum channel number * @return the initially requested maximum channel number; zero for unlimited */ // @ts-ignore public getRequestedChannelMax(): number /*int*/ /** * Set the requested maximum channel number. * * Note the value must be between 0 and 65535 (unsigned short in AMQP 0-9-1). * @param requestedChannelMax initially requested maximum channel number; zero for unlimited */ // @ts-ignore public setRequestedChannelMax(requestedChannelMax: number /*int*/): void /** * Retrieve the requested maximum frame size * @return the initially requested maximum frame size, in octets; zero for unlimited */ // @ts-ignore public getRequestedFrameMax(): number /*int*/ /** * Set the requested maximum frame size * @param requestedFrameMax initially requested maximum frame size, in octets; zero for unlimited */ // @ts-ignore public setRequestedFrameMax(requestedFrameMax: number /*int*/): void /** * Retrieve the requested heartbeat interval. * @return the initially requested heartbeat interval, in seconds; zero for none */ // @ts-ignore public getRequestedHeartbeat(): number /*int*/ /** * Set the TCP connection timeout. * @param timeout connection TCP establishment timeout in milliseconds; zero for infinite */ // @ts-ignore public setConnectionTimeout(timeout: number /*int*/): void /** * Retrieve the TCP connection timeout. * @return the TCP connection timeout, in milliseconds; zero for infinite */ // @ts-ignore public getConnectionTimeout(): number /*int*/ /** * Retrieve the AMQP 0-9-1 protocol handshake timeout. * @return the AMQP0-9-1 protocol handshake timeout, in milliseconds */ // @ts-ignore public getHandshakeTimeout(): number /*int*/ /** * Set the AMQP0-9-1 protocol handshake timeout. * @param timeout the AMQP0-9-1 protocol handshake timeout, in milliseconds */ // @ts-ignore public setHandshakeTimeout(timeout: number /*int*/): void /** * Set the shutdown timeout. This is the amount of time that Consumer implementations have to * continue working through deliveries (and other Consumer callbacks) after the connection * has closed but before the ConsumerWorkService is torn down. If consumers exceed this timeout * then any remaining queued deliveries (and other Consumer callbacks, including * the Consumer's handleShutdownSignal() invocation) will be lost. * @param shutdownTimeout shutdown timeout in milliseconds; zero for infinite; default 10000 */ // @ts-ignore public setShutdownTimeout(shutdownTimeout: number /*int*/): void /** * Retrieve the shutdown timeout. * @return the shutdown timeout, in milliseconds; zero for infinite */ // @ts-ignore public getShutdownTimeout(): number /*int*/ /** * Set the requested heartbeat timeout. Heartbeat frames will be sent at about 1/2 the timeout interval. * If server heartbeat timeout is configured to a non-zero value, this method can only be used * to lower the value; otherwise any value provided by the client will be used. * * Note the value must be between 0 and 65535 (unsigned short in AMQP 0-9-1). * @param requestedHeartbeat the initially requested heartbeat timeout, in seconds; zero for none * @see <a href="https://rabbitmq.com/heartbeats.html">RabbitMQ Heartbeats Guide</a> */ // @ts-ignore public setRequestedHeartbeat(requestedHeartbeat: number /*int*/): void /** * Retrieve the currently-configured table of client properties * that will be sent to the server during connection * startup. Clients may add, delete, and alter keys in this * table. Such changes will take effect when the next new * connection is started using this factory. * @return the map of client properties * @see #setClientProperties */ // @ts-ignore public getClientProperties(): java.util.Map<java.lang.String | string, java.lang.Object | any> /** * Replace the table of client properties that will be sent to the * server during subsequent connection startups. * @param clientProperties the map of extra client properties * @see #getClientProperties */ // @ts-ignore public setClientProperties(clientProperties: java.util.Map<java.lang.String | string, java.lang.Object | any>): void /** * Gets the sasl config to use when authenticating * @return the sasl config * @see com.rabbitmq.client.SaslConfig */ // @ts-ignore public getSaslConfig(): com.rabbitmq.client.SaslConfig /** * Sets the sasl config to use when authenticating * @param saslConfig * @see com.rabbitmq.client.SaslConfig */ // @ts-ignore public setSaslConfig(saslConfig: com.rabbitmq.client.SaslConfig): void /** * Retrieve the socket factory used to make connections with. */ // @ts-ignore public getSocketFactory(): javax.net.SocketFactory /** * Set the socket factory used to create sockets for new connections. Can be * used to customize TLS-related settings by passing in a * javax.net.ssl.SSLSocketFactory instance. * Note this applies only to blocking IO, not to * NIO, as the NIO API doesn't use the SocketFactory API. * @see #useSslProtocol */ // @ts-ignore public setSocketFactory(factory: javax.net.SocketFactory): void /** * Get the socket configurator. * @see #setSocketConfigurator(SocketConfigurator) */ // @ts-ignore public getSocketConfigurator(): com.rabbitmq.client.SocketConfigurator /** * Set the socket configurator. This gets a chance to "configure" a socket * before it has been opened. The default socket configurator disables * Nagle's algorithm. * @param socketConfigurator the configurator to use */ // @ts-ignore public setSocketConfigurator(socketConfigurator: com.rabbitmq.client.SocketConfigurator): void /** * Set the executor to use for consumer operation dispatch * by default for newly created connections. * All connections that use this executor share it. * It's developer's responsibility to shut down the executor * when it is no longer needed. * @param executor executor service to be used for * consumer operation */ // @ts-ignore public setSharedExecutor(executor: java.util.concurrent.ExecutorService): void /** * Set the executor to use for connection shutdown. * All connections that use this executor share it. * It's developer's responsibility to shut down the executor * when it is no longer needed. * @param executor executor service to be used for * connection shutdown */ // @ts-ignore public setShutdownExecutor(executor: java.util.concurrent.ExecutorService): void /** * Set the executor to use to send heartbeat frames. * All connections that use this executor share it. * It's developer's responsibility to shut down the executor * when it is no longer needed. * @param executor executor service to be used to send heartbeat */ // @ts-ignore public setHeartbeatExecutor(executor: java.util.concurrent.ScheduledExecutorService): void /** * Retrieve the thread factory used to instantiate new threads. * @see ThreadFactory */ // @ts-ignore public getThreadFactory(): java.util.concurrent.ThreadFactory /** * Set the thread factory used to instantiate new threads. * @see ThreadFactory */ // @ts-ignore public setThreadFactory(threadFactory: java.util.concurrent.ThreadFactory): void /** * Get the exception handler. * @see com.rabbitmq.client.ExceptionHandler */ // @ts-ignore public getExceptionHandler(): com.rabbitmq.client.ExceptionHandler /** * Set the exception handler to use for newly created connections. * @see com.rabbitmq.client.ExceptionHandler */ // @ts-ignore public setExceptionHandler(exceptionHandler: com.rabbitmq.client.ExceptionHandler): void // @ts-ignore public isSSL(): boolean /** * Convenience method for configuring TLS using * the default set of TLS protocols and a trusting TrustManager. * This setup is only suitable for development * and QA environments. * The trust manager will trust every server certificate presented * to it, this is convenient for local development but * not recommended to use in production as it provides no protection * against man-in-the-middle attacks. Prefer {@link #useSslProtocol(SSLContext)}. */ // @ts-ignore public useSslProtocol(): void /** * Convenience method for configuring TLS using * the supplied protocol and a very trusting TrustManager. This setup is only suitable for development * and QA environments. * The trust manager will trust every server certificate presented * to it, this is convenient for local development but * not recommended to use in production as it provides no protection * against man-in-the-middle attacks. * Use {@link #useSslProtocol(SSLContext)} in production environments. * The produced {@link SSLContext} instance will be shared by all * the connections created by this connection factory. * Use {@link #setSslContextFactory(SslContextFactory)} for more flexibility. * @see #setSslContextFactory(SslContextFactory) */ // @ts-ignore public useSslProtocol(protocol: java.lang.String | string): void /** * Convenience method for configuring TLS. * Pass in the TLS protocol version to use, e.g. "TLSv1.2" or "TLSv1.1", and * a desired {@link TrustManager}. * The produced {@link SSLContext} instance will be shared with all * the connections created by this connection factory. Use * {@link #setSslContextFactory(SslContextFactory)} for more flexibility. * @param protocol the TLS protocol to use. * @param trustManager the {#link TrustManager} implementation to use. * @see #setSslContextFactory(SslContextFactory) * @see #useSslProtocol(SSLContext) */ // @ts-ignore public useSslProtocol(protocol: java.lang.String | string, trustManager: javax.net.ssl.TrustManager): void /** * Sets up TLS with an initialized {@link SSLContext}. The caller is responsible * for setting up the context with a {@link TrustManager} with suitable security guarantees, * e.g. peer verification. * The {@link SSLContext} instance will be shared with all * the connections created by this connection factory. Use * {@link #setSslContextFactory(SslContextFactory)} for more flexibility. * @param context An initialized SSLContext * @see #setSslContextFactory(SslContextFactory) */ // @ts-ignore public useSslProtocol(context: javax.net.ssl.SSLContext): void /** * Enable server hostname verification for TLS connections. * * This enables hostname verification regardless of the IO mode * used (blocking or non-blocking IO). * * This can be called typically after setting the {@link SSLContext} * with one of the <code>useSslProtocol</code> methods. * @see NioParams#enableHostnameVerification() * @see NioParams#setSslEngineConfigurator(SslEngineConfigurator) * @see SslEngineConfigurators#ENABLE_HOSTNAME_VERIFICATION * @see SocketConfigurators#ENABLE_HOSTNAME_VERIFICATION * @see ConnectionFactory#useSslProtocol(String) * @see ConnectionFactory#useSslProtocol(SSLContext) * @see ConnectionFactory#useSslProtocol() * @see ConnectionFactory#useSslProtocol(String, TrustManager) * @since 5.4.0 */ // @ts-ignore public enableHostnameVerification(): void // @ts-ignore enableHostnameVerificationForNio(): void // @ts-ignore enableHostnameVerificationForBlockingIo(): void // @ts-ignore public static computeDefaultTlsProtocol(supportedProtocols: java.lang.String[] | string[]): string /** * Returns true if <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, false otherwise * @return true if automatic connection recovery is enabled, false otherwise * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public isAutomaticRecoveryEnabled(): boolean /** * Enables or disables <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a>. * @param automaticRecovery if true, enables connection recovery * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public setAutomaticRecoveryEnabled(automaticRecovery: boolean): void /** * Returns true if topology recovery is enabled, false otherwise * @return true if topology recovery is enabled, false otherwise * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public isTopologyRecoveryEnabled(): boolean /** * Enables or disables topology recovery * @param topologyRecovery if true, enables topology recovery * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public setTopologyRecoveryEnabled(topologyRecovery: boolean): void /** * Get the executor to use for parallel topology recovery. If null (the default), recovery is done single threaded on the main connection thread. * @return thread pool executor * @since 4.7.0 */ // @ts-ignore public getTopologyRecoveryExecutor(): java.util.concurrent.ExecutorService /** * Set the executor to use for parallel topology recovery. If null (the default), recovery is done single threaded on the main connection thread. * It is recommended to pass a ThreadPoolExecutor that will allow its core threads to timeout so these threads can die when recovery is complete. * It's developer's responsibility to shut down the executor when it is no longer needed. * Note: your {@link ExceptionHandler#handleTopologyRecoveryException(Connection, Channel, TopologyRecoveryException)} method should be thread-safe. * @param topologyRecoveryExecutor thread pool executor * @since 4.7.0 */ // @ts-ignore public setTopologyRecoveryExecutor(topologyRecoveryExecutor: java.util.concurrent.ExecutorService): void // @ts-ignore public setMetricsCollector(metricsCollector: com.rabbitmq.client.MetricsCollector): void // @ts-ignore public getMetricsCollector(): com.rabbitmq.client.MetricsCollector /** * Set a {@link CredentialsRefreshService} instance to handle credentials refresh if appropriate. * * Each created connection will register to the refresh service to send an AMQP <code>update.secret</code> * frame when credentials are about to expire. This is the refresh service responsibility to schedule * credentials refresh and <code>udpate.secret</code> frame sending, based on the information provided * by the {@link CredentialsProvider}. * * Note the {@link CredentialsRefreshService} is used only when the {@link CredentialsProvider} * signals credentials can expire, by returning a non-null value from {@link CredentialsProvider#getTimeBeforeExpiration()}. * @param credentialsRefreshService the refresh service to use * @see #setCredentialsProvider(CredentialsProvider) * @see DefaultCredentialsRefreshService */ // @ts-ignore public setCredentialsRefreshService(credentialsRefreshService: com.rabbitmq.client.impl.CredentialsRefreshService): void // @ts-ignore createFrameHandlerFactory(): com.rabbitmq.client.impl.FrameHandlerFactory /** * Create a new broker connection, picking the first available address from * the list. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address from the provided list. * @param addrs an array of known broker addresses (hostname/port pairs) to try in order * @return an interface to the connection * @throws IOException if it encounters a problem */ // @ts-ignore public newConnection(addrs: com.rabbitmq.client.Address[]): com.rabbitmq.client.Connection /** * Create a new broker connection, picking the first available address from * the list provided by the {@link AddressResolver}. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address provided by the {@link AddressResolver}. * @param addressResolver discovery service to list potential addresses (hostname/port pairs) to connect to * @return an interface to the connection * @throws IOException if it encounters a problem * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public newConnection(addressResolver: com.rabbitmq.client.AddressResolver): com.rabbitmq.client.Connection /** * Create a new broker connection with a client-provided name, picking the first available address from * the list. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address from the provided list. * @param addrs an array of known broker addresses (hostname/port pairs) to try in order * @param clientProvidedName application-specific connection name, will be displayed * in the management UI if RabbitMQ server supports it. * This value doesn't have to be unique and cannot be used * as a connection identifier e.g. in HTTP API requests. * This value is supposed to be human-readable. * @return an interface to the connection * @throws IOException if it encounters a problem */ // @ts-ignore public newConnection(addrs: com.rabbitmq.client.Address[], clientProvidedName: java.lang.String | string): com.rabbitmq.client.Connection /** * Create a new broker connection, picking the first available address from * the list. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address from the provided list. * @param addrs a List of known broker addresses (hostname/port pairs) to try in order * @return an interface to the connection * @throws IOException if it encounters a problem */ // @ts-ignore public newConnection(addrs: java.util.List<com.rabbitmq.client.Address> | Array<com.rabbitmq.client.Address>): com.rabbitmq.client.Connection /** * Create a new broker connection with a client-provided name, picking the first available address from * the list. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address from the provided list. * @param addrs a List of known broker addresses (hostname/port pairs) to try in order * @param clientProvidedName application-specific connection name, will be displayed * in the management UI if RabbitMQ server supports it. * This value doesn't have to be unique and cannot be used * as a connection identifier e.g. in HTTP API requests. * This value is supposed to be human-readable. * @return an interface to the connection * @throws IOException if it encounters a problem */ // @ts-ignore public newConnection(addrs: java.util.List<com.rabbitmq.client.Address> | Array<com.rabbitmq.client.Address>, clientProvidedName: java.lang.String | string): com.rabbitmq.client.Connection /** * Create a new broker connection, picking the first available address from * the list. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address from the provided list. * @param executor thread execution service for consumers on the connection * @param addrs an array of known broker addresses (hostname/port pairs) to try in order * @return an interface to the connection * @throws java.io.IOException if it encounters a problem * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public newConnection(executor: java.util.concurrent.ExecutorService, addrs: com.rabbitmq.client.Address[]): com.rabbitmq.client.Connection /** * Create a new broker connection with a client-provided name, picking the first available address from * the list. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address from the provided list. * @param executor thread execution service for consumers on the connection * @param addrs an array of known broker addresses (hostname/port pairs) to try in order * @param clientProvidedName application-specific connection name, will be displayed * in the management UI if RabbitMQ server supports it. * This value doesn't have to be unique and cannot be used * as a connection identifier e.g. in HTTP API requests. * This value is supposed to be human-readable. * @return an interface to the connection * @throws java.io.IOException if it encounters a problem * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public newConnection(executor: java.util.concurrent.ExecutorService, addrs: com.rabbitmq.client.Address[], clientProvidedName: java.lang.String | string): com.rabbitmq.client.Connection /** * Create a new broker connection, picking the first available address from * the list. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address from the provided list. * @param executor thread execution service for consumers on the connection * @param addrs a List of known broker addrs (hostname/port pairs) to try in order * @return an interface to the connection * @throws java.io.IOException if it encounters a problem * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public newConnection(executor: java.util.concurrent.ExecutorService, addrs: java.util.List<com.rabbitmq.client.Address> | Array<com.rabbitmq.client.Address>): com.rabbitmq.client.Connection /** * Create a new broker connection, picking the first available address from * the list provided by the {@link AddressResolver}. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address provided by the {@link AddressResolver}. * @param executor thread execution service for consumers on the connection * @param addressResolver discovery service to list potential addresses (hostname/port pairs) to connect to * @return an interface to the connection * @throws java.io.IOException if it encounters a problem * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public newConnection(executor: java.util.concurrent.ExecutorService, addressResolver: com.rabbitmq.client.AddressResolver): com.rabbitmq.client.Connection /** * Create a new broker connection with a client-provided name, picking the first available address from * the list. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address from the provided list. * @param executor thread execution service for consumers on the connection * @param addrs a List of known broker addrs (hostname/port pairs) to try in order * @param clientProvidedName application-specific connection name, will be displayed * in the management UI if RabbitMQ server supports it. * This value doesn't have to be unique and cannot be used * as a connection identifier e.g. in HTTP API requests. * This value is supposed to be human-readable. * @return an interface to the connection * @throws java.io.IOException if it encounters a problem * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public newConnection(executor: java.util.concurrent.ExecutorService, addrs: java.util.List<com.rabbitmq.client.Address> | Array<com.rabbitmq.client.Address>, clientProvidedName: java.lang.String | string): com.rabbitmq.client.Connection /** * Create a new broker connection with a client-provided name, picking the first available address from * the list provided by the {@link AddressResolver}. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Future * reconnection attempts will pick a random accessible address provided by the {@link AddressResolver}. * @param executor thread execution service for consumers on the connection * @param addressResolver discovery service to list potential addresses (hostname/port pairs) to connect to * @param clientProvidedName application-specific connection name, will be displayed * in the management UI if RabbitMQ server supports it. * This value doesn't have to be unique and cannot be used * as a connection identifier e.g. in HTTP API requests. * This value is supposed to be human-readable. * @return an interface to the connection * @throws java.io.IOException if it encounters a problem * @see <a href="https://www.rabbitmq.com/api-guide.html#recovery">Automatic Recovery</a> */ // @ts-ignore public newConnection(executor: java.util.concurrent.ExecutorService, addressResolver: com.rabbitmq.client.AddressResolver, clientProvidedName: java.lang.String | string): com.rabbitmq.client.Connection // @ts-ignore public params(consumerWorkServiceExecutor: java.util.concurrent.ExecutorService): com.rabbitmq.client.impl.ConnectionParams // @ts-ignore createConnection(params: com.rabbitmq.client.impl.ConnectionParams, frameHandler: com.rabbitmq.client.impl.FrameHandler, metricsCollector: com.rabbitmq.client.MetricsCollector): com.rabbitmq.client.impl.AMQConnection /** * Create a new broker connection. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Reconnection * attempts will always use the address configured on {@link ConnectionFactory}. * @return an interface to the connection * @throws IOException if it encounters a problem */ // @ts-ignore public newConnection(): com.rabbitmq.client.Connection /** * Create a new broker connection. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Reconnection * attempts will always use the address configured on {@link ConnectionFactory}. * @param connectionName client-provided connection name (an arbitrary string). Will * be displayed in management UI if the server supports it. * @return an interface to the connection * @throws IOException if it encounters a problem */ // @ts-ignore public newConnection(connectionName: java.lang.String | string): com.rabbitmq.client.Connection /** * Create a new broker connection. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Reconnection * attempts will always use the address configured on {@link ConnectionFactory}. * @param executor thread execution service for consumers on the connection * @return an interface to the connection * @throws IOException if it encounters a problem */ // @ts-ignore public newConnection(executor: java.util.concurrent.ExecutorService): com.rabbitmq.client.Connection /** * Create a new broker connection. * If <a href="https://www.rabbitmq.com/api-guide.html#recovery">automatic connection recovery</a> * is enabled, the connection returned by this method will be {@link Recoverable}. Reconnection * attempts will always use the address configured on {@link ConnectionFactory}. * @param executor thread execution service for consumers on the connection * @param connectionName client-provided connection name (an arbitrary string). Will * be displayed in management UI if the server supports it. * @return an interface to the connection * @throws IOException if it encounters a problem */ // @ts-ignore public newConnection(executor: java.util.concurrent.ExecutorService, connectionName: java.lang.String | string): com.rabbitmq.client.Connection // @ts-ignore createAddressResolver(addresses: java.util.List<com.rabbitmq.client.Address> | Array<com.rabbitmq.client.Address>): com.rabbitmq.client.AddressResolver // @ts-ignore public clone(): com.rabbitmq.client.ConnectionFactory /** * Load settings from a property file. * Keys must be prefixed with <code>rabbitmq.</code>, * use {@link ConnectionFactory#load(String, String)} to * specify your own prefix. * @param propertyFileLocation location of the property file to use * @throws IOException when something goes wrong reading the file * @since 4.4.0 * @see ConnectionFactoryConfigurator */ // @ts-ignore public load(propertyFileLocation: java.lang.String | string): com.rabbitmq.client.ConnectionFactory /** * Load settings from a property file. * @param propertyFileLocation location of the property file to use * @param prefix key prefix for the entries in the file * @throws IOException when something goes wrong reading the file * @since 4.4.0 * @see ConnectionFactoryConfigurator */ // @ts-ignore public load(propertyFileLocation: java.lang.String | string, prefix: java.lang.String | string): com.rabbitmq.client.ConnectionFactory /** * Load settings from a {@link Properties} instance. * Keys must be prefixed with <code>rabbitmq.</code>, * use {@link ConnectionFactory#load(Properties, String)} to * specify your own prefix. * @param properties source for settings * @since 4.4.0 * @see ConnectionFactoryConfigurator */ // @ts-ignore public load(properties: java.util.Properties): com.rabbitmq.client.ConnectionFactory /** * Load settings from a {@link Properties} instance. * @param properties source for settings * @param prefix key prefix for properties entries * @since 4.4.0 * @see ConnectionFactoryConfigurator */ // @ts-ignore public load(properties: java.util.Properties, prefix: java.lang.String | string): com.rabbitmq.client.ConnectionFactory /** * Load settings from a {@link Map} instance. * Keys must be prefixed with <code>rabbitmq.</code>, * use {@link ConnectionFactory#load(Map, String)} to * specify your own prefix. * @param prope