@itwin/core-frontend

{ "tools": { "View": { "GlobeSatellite": { "keyin": "view globe satellite", "description": "View a location on the globe from a satellite's perspective; the viewed location is derived from the position of the current camera's eye above the globe", "flyover": "View Globe Satellite" }, "GlobeBird": { "keyin": "view globe bird", "description": "View a location on the globe from a bird's eye perspective; the viewed location is derived from the position of the current camera's eye above the globe", "flyover": "View Globe Bird" }, "GlobeLocation": { "keyin": "view globe location", "description": "View a location on the globe corresponding to a specified string; this will either look down at the location using a bird's eye height, or, if a range is available, the entire range corresponding to the location will be viewed", "flyover": "View Globe Location" }, "GlobeIModel": { "keyin": "view globe imodel", "description": "View the project iModel on the globe so that the extent of the project is visible", "flyover": "View Globe IModel" }, "LocalEntities": { "keyin": "view local entities", "description": "View markers representing local entities", "flyover": "View Local Entities" }, "Pan": { "keyin": "pan view", "description": "Moves origin of view", "flyover": "Pan View", "Prompts": { "FirstPoint": "Define point to pan from", "NextPoint": "Define point to pan to" } }, "Rotate": { "keyin": "rotate view", "description": "Rotates View about specified point", "flyover": "Rotate About Point", "Prompts": { "FirstPoint": "Identify point on element to rotate about", "NextPoint": "Define amount of rotation" } }, "Zoom": { "keyin": "zoom", "description": "Changes view magnification", "flyover": "Zoom About Point", "Prompts": { "FirstPoint": "Define point to zoom view about", "NextPoint": "Define amount of zoom" } }, "Look": { "keyin": "look", "description": "Look around the design", "flyover": "Look Around", "Prompts": { "FirstPoint": "Enter point to begin looking around", "NextPoint": "Define new view direction" } }, "LookAndMove": { "keyin": "navigate view", "description": "Walk around in the design", "flyover": "Walk Around", "Prompts": { "FirstPoint": "Enter point to look around or start moving", "NextPoint": "Enter point to accept current location" }, "Inputs": { "AcceptLookPoint": "Accept point to begin look or move", "WalkKeys": "Move forward, backward, left, right", "ElevateKeys": "Move up and down", "VelocityChange": "Increase or decrease velocity", "CollideKeys": "Toggle collisions and floor detection", "TouchZoneLL": "Lower left to move forward, backward, left, right", "TouchZoneLR": "Lower right to look around", "TouchTapLL": "Lower left to toggle up, down, left, right movement", "TouchTapLR": "Lower right to toggle 2x movement speed" } }, "Walk": { "keyin": "walk", "description": "Walk around in the design", "flyover": "Walk Around", "Prompts": { "FirstPoint": "Enter point to start walking", "NextPoint": "Enter point to stop walking" } }, "Fly": { "keyin": "fly", "description": "Fly around in the design", "flyover": "Fly Around", "Prompts": { "FirstPoint": "Enter point to start flying", "NextPoint": "Enter point to stop flying" } }, "WindowArea": { "keyin": "window area", "description": "Select viewing area", "flyover": "Window Area", "Prompts": { "FirstPoint": "Define first corner point", "NextPoint": "Define opposite corner point" } }, "Scroll": { "keyin": "scroll view", "description": "Scrolls view", "flyover": "Scroll", "Prompts": { "FirstPoint": "Enter point to start scrolling", "NextPoint": "Enter point to stop scrolling" } }, "Fit": { "keyin": "fit view", "description": "Displays entire model", "flyover": "Fit View", "Prompts": { "FirstPoint": "Select view to fit" }, "Model": { "keyin": "fit model", "description": "Fit all graphics in the chosen model" } }, "SetupCamera": { "keyin": "set up camera", "description": "Set up view camera", "flyover": "Set Up Camera", "Prompts": { "FirstPoint": "Define camera position", "NextPoint": "Define camera target point" }, "Labels": { "CameraHeight": "Camera Height", "TargetHeight": "Target Height" } }, "SetupWalkCamera": { "keyin": "set up walk camera", "description": "Set up walk camera", "flyover": "Set Up Walk Camera", "Prompts": { "FirstPoint": "Define floor position", "NextPoint": "Define look direction" } }, "ToggleCamera": { "keyin": "camera toggle", "description": "Turns on camera if off, turns off camera if on.", "flyover": "Camera On/Off" }, "Undo": { "keyin": "view undo", "description": "Reverses the most recent change to the Viewport.", "flyover": "View Previous" }, "Redo": { "keyin": "view redo", "description": "Re-applies the most recently un-done change to the Viewport.", "flyover": "View Next" }, "Standard": { "keyin": "rotate to standard view", "description": "align view with standard rotation", "flyover": "Standard View" } }, "ViewClip": { "ByPlane": { "keyin": "viewclip byplane", "description": "Section a view with a plane", "flyover": "Section View", "Prompts": { "FirstPoint": "Identify point on section plane" } }, "ByShape": { "keyin": "viewclip byshape", "description": "Create a clip volume by shape points", "flyover": "Clip Volume From Shape", "Prompts": { "FirstPoint": "Identify shape start point", "SecondPoint": "Identify first edge endpoint", "ThirdPoint": "Identify opposite corner", "NextPoint": "Identify shape point" } }, "ByRange": { "keyin": "viewclip byrange", "description": "Create a clip volume by range from 2 points", "flyover": "Clip Volume From Range", "Prompts": { "FirstPoint": "Identify corner of clip volume", "NextPoint": "Identify opposite corner of clip volume" } }, "ByElement": { "keyin": "viewclip byelement", "description": "Create a clip volume from an element or selection set", "flyover": "Clip Volume From Element", "Prompts": { "FirstPoint": "Identify element to use for clip volume" } }, "Clear": { "keyin": "viewclip clear", "description": "Remove clip volume or section planes from a view", "flyover": "Unclip View", "Prompts": { "FirstPoint": "Identify view to unclip" } }, "Message": { "Clip": "View Clip", "ModifyClip": "Modify View Clip" } }, "SelectView": "Select view", "Select": { "keyin": "select elements", "description": "Selects Element for inspection or manipulation", "flyover": "Select Elements" }, "AccuDraw": { "SessionToggle": { "keyin": "accudraw session toggle", "description": "Disable/Enable AccuDraw for session", "flyover": "Disable/Enable" }, "SuspendToggle": { "keyin": "accudraw suspend toggle", "description": "Suspend/Unsuspend AccuDraw for current tool", "flyover": "Suspend/Unsuspend" }, "SetOrigin": { "keyin": "accudraw set origin", "description": "Set AccuDraw origin", "flyover": "Set Origin" }, "LockSmart": { "keyin": "accudraw lock smart", "description": "Set AccuDraw locks based off current state", "flyover": "Smart Lock" }, "LockIndex": { "keyin": "accudraw lock index", "description": "Set AccuDraw indexing based off current state", "flyover": "Lock Index" }, "LockX": { "keyin": "accudraw lock x", "description": "Set AccuDraw x axis lock", "flyover": "Lock X" }, "LockY": { "keyin": "accudraw lock y", "description": "Set AccuDraw y axis lock", "flyover": "Lock Y" }, "LockZ": { "keyin": "accudraw lock z", "description": "Set AccuDraw z axis lock", "flyover": "Lock Z" }, "LockDistance": { "keyin": "accudraw lock distance", "description": "Set AccuDraw distance lock", "flyover": "Lock Distance" }, "LockAngle": { "keyin": "accudraw lock angle", "description": "Set AccuDraw angle lock", "flyover": "Lock Angle" }, "ChangeMode": { "keyin": "accudraw mode", "description": "Switch AccuDraw mode between polar and rectangular", "flyover": "Change Mode" }, "RotateCycle": { "keyin": "accudraw rotate cycle", "description": "Set AccuDraw rotation by cycling through top, front, and side relative to current rotation", "flyover": "Rotate Cycle" }, "RotateTop": { "keyin": "accudraw rotate top", "description": "Set AccuDraw rotation to top", "flyover": "Rotate Top" }, "RotateFront": { "keyin": "accudraw rotate front", "description": "Set AccuDraw rotation to front", "flyover": "Rotate Front" }, "RotateSide": { "keyin": "accudraw rotate side", "description": "Set AccuDraw rotation to side", "flyover": "Rotate Side" }, "RotateView": { "keyin": "accudraw rotate view", "description": "Set AccuDraw rotation to view", "flyover": "Rotate View" }, "Rotate90AboutX": { "keyin": "accudraw rotate about x", "description": "Set AccuDraw rotation to 90 degree rotation about current X axis", "flyover": "Rotate About X" }, "Rotate90AboutY": { "keyin": "accudraw rotate about y", "description": "Set AccuDraw rotation to 90 degree rotation about current Y axis", "flyover": "Rotate About Y" }, "Rotate90AboutZ": { "keyin": "accudraw rotate about z", "description": "Set AccuDraw rotation to 90 degree rotation about current Z axis", "flyover": "Rotate About Z" }, "RotateAxes": { "keyin": "accudraw rotate quick", "description": "Set AccuDraw rotation about current origin", "flyover": "Rotate Quick", "Prompts": { "FirstPoint": "Define X axis" } }, "RotateElement": { "keyin": "accudraw rotate element", "description": "Set AccuDraw rotation from element", "flyover": "Rotate To Element", "Prompts": { "FirstPoint": "Identify element to define rotation" } }, "DefineACSByElement": { "keyin": "define acs byelement", "description": "Set view ACS from element", "flyover": "Define ACS By Element", "Prompts": { "FirstPoint": "Identify element to define rotation" } }, "DefineACSByPoints": { "keyin": "define acs bypoints", "description": "Set view ACS by 3 points", "flyover": "Define ACS By Points", "Prompts": { "FirstPoint": "Define X axis origin", "SecondPoint": "Define X axis", "NextPoint": "Define Y axis" } } }, "Measure": { "Distance": { "keyin": "measure distance", "description": "Measure distance between points", "flyover": "Measure Distance", "Prompts": { "FirstPoint": "Enter point to measure from", "NextPoint": "Enter point to measure to" } }, "Location": { "keyin": "measure location", "description": "Show coordintate location", "flyover": "Show Location", "Prompts": { "EnterPoint": "Enter point to show location" } }, "Length": { "keyin": "measure length", "description": "Measure length of elements", "flyover": "Measure Length" }, "Area": { "keyin": "measure area", "description": "Measure area of elements", "flyover": "Measure Area" }, "Volume": { "keyin": "measure volume", "description": "Measure volume of elements", "flyover": "Measure Volume" }, "AreaByPoints": { "keyin": "measure points area", "description": "Measure area defined by points", "flyover": "Measure Area By Points", "Prompts": { "FirstPoint": "Identify shape start point", "SecondPoint": "Identify first edge endpoint", "ThirdPoint": "Identify opposite corner", "NextPoint": "Identify shape point" } }, "Labels": { "CumulativeDistance": "Cumulative Distance", "Distance": "Distance", "Slope": "Slope", "StartCoord": "Start Coordinate", "EndCoord": "End Coordinate", "Delta": "Delta", "Coordinate": "Model Coordinate", "LatLong": "Latitude, Longitude", "Altitude": "Altitude", "N": "N", "S": "S", "E": "E", "W": "W", "Length": "Length", "Perimeter": "Perimeter", "Area": "Area", "Volume": "Volume", "Centroid": "Centroid" } }, "ElementSet": { "Prompts": { "IdentifyElement": "Identify element", "IdentifyPoint": "Identify point", "ConfirmSelection": "Confirm selection", "InspectResult": "Inspect result", "StartPoint": "Define start point", "EndPoint": "Define endpoint", "StartCorner": "Define corner point", "OppositeCorner": "Define opposite corner" }, "Inputs": { "CrossingLine": "Define crossing line", "BoxCorners": "Define box corners", "InvertSelection": "Invert selection", "OverlapSelection": "Reverse inside/overlap direction", "ClearSelection": "Miss to clear selection", "AcceptSelection": "Accept selection", "RejectSelection": "Reject selection", "AcceptElement": "Accept element", "AcceptPoint": "Accept point", "AdditionalElement": "Identify additional elements", "AdditionalPoint": "Define additional points", "UndoLastPoint": "Undo last point", "Accept": "Accept", "Complete": "Complete", "Cancel": "Cancel", "Restart": "Restart", "Exit": "Exit" }, "Error": { "NoFence": "No fence defined", "NoFenceElems": "No elements in fence", "NoFenceElemsOutside": "No elements outside fence", "NoSSElems": "No elements selected", "ActiveSSWithoutElems": "Selection set contains models and/or categories, but no elements", "AlreadySelected": "Element is already selected", "NotSelected": "Element is not selected", "NotSupportedElmType": "Element type not valid for this tool", "ProjectExtents": "Invalid location. All elements must fit within the volume defined by the project extents." }, "SelectionMethods": { "Pick": "Select single", "Line": "Select by crossing line", "Box": "Select by box corners" }, "SelectionModes": { "Replace": "Replace current selection", "Add": "Add to selection", "Remove": "Remove from selection" } }, "Settings": { "Orientation": { "Label": "Orientation", "Top": "Top", "Front": "Front", "Left": "Left", "Bottom": "Bottom", "Back": "Back", "Right": "Right", "View": "View", "Face": "Face" } }, "Extension": { "keyin": "load extension", "description": "Loads a extension module" } }, "touchCursor": { "Activate": "Activate touch cursor", "AcceptPoint": "Accept point", "IdentifyPoint": "Identify point" }, "toolAssistance": { "altKey": "Alt", "ctrlKey": "Ctrl", "shiftKey": "Shift", "inputs": "Inputs" } }