@hiv3d/bambu-types

{ "type": "filament", "name": "Generic PA @BBL H2D", "inherits": "Generic PA @base", "from": "system", "setting_id": "GFSN99_01", "instantiation": "true", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], "fan_cooling_layer_time": [ "65" ], "fan_max_speed": [ "85" ], "fan_min_speed": [ "40" ], "filament_deretraction_speed": [ "nil", "nil" ], "filament_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow" ], "filament_flow_ratio": [ "1", "1" ], "filament_flush_temp": [ "0", "0" ], "filament_flush_volumetric_speed": [ "0", "0" ], "filament_long_retractions_when_cut": [ "nil", "nil" ], "filament_max_volumetric_speed": [ "12", "12" ], "filament_pre_cooling_temperature": [ "0", "0" ], "filament_ramming_travel_time": [ "0", "0" ], "filament_ramming_volumetric_speed": [ "-1", "-1" ], "filament_retract_before_wipe": [ "nil", "nil" ], "filament_retract_restart_extra": [ "nil", "nil" ], "filament_retract_when_changing_layer": [ "nil", "nil" ], "filament_retraction_distances_when_cut": [ "nil", "nil" ], "filament_retraction_length": [ "nil", "nil" ], "filament_retraction_minimum_travel": [ "nil", "nil" ], "filament_retraction_speed": [ "nil", "nil" ], "filament_wipe": [ "nil", "nil" ], "filament_wipe_distance": [ "nil", "nil" ], "filament_z_hop": [ "nil", "nil" ], "filament_z_hop_types": [ "nil", "nil" ], "long_retractions_when_ec": [ "1", "1" ], "nozzle_temperature": [ "260", "260" ], "nozzle_temperature_initial_layer": [ "260", "260" ], "nozzle_temperature_range_high": [ "280" ], "nozzle_temperature_range_low": [ "240" ], "overhang_fan_speed": [ "95" ], "overhang_fan_threshold": [ "10%" ], "required_nozzle_HRC": [ "3" ], "retraction_distances_when_ec": [ "4", "4" ], "slow_down_layer_time": [ "8" ], "slow_down_min_speed": [ "10" ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", "Bambu Lab H2D 0.8 nozzle" ], "filament_start_gcode": [ "; filament start gcode\n" ], "filament_end_gcode": [ "; filament end gcode \n" ] }