@bottobot/td-mcp
Version:
TouchDesigner Documentation MCP Server v2.3 - Pure MCP server for VS Code/Codium with comprehensive operator documentation for 629 operators + 7 tutorials across all categories (TOP, CHOP, SOP, DAT, MAT, COMP, POP). Features experimental POP operators wit
1,277 lines • 64.3 kB
JSON
{
"id": "osc_out_chop",
"name": "OSC Out CHOP",
"displayName": "OSC Out CHOP",
"category": "CHOP",
"subcategory": "Network",
"version": "",
"lastUpdated": "2025-08-07T07:50:05.920Z",
"sourceFile": "C:\\Program Files\\Derivative\\TouchDesigner\\Samples\\Learn\\OfflineHelp\\https.docs.derivative.ca\\OSC_Out_CHOP.htm",
"url": "",
"description": "TheOSC Out CHOP sends all input channels to a specified network address and port. Each channel name and associated data is transmitted together to the specified location. TouchDesigner time stamps all outgoing Open Sound Control messages with the time of the outgoing frame relative to the system time when the first message was sent. OSC CHOPs in TouchDesigner use the UDP transport protocol.",
"summary": "TheOSC Out CHOP sends all input channels to a specified network address and port. Each channel name and associated data is transmitted together to the specified location. TouchDesigner time stamps all",
"details": "",
"usage": "",
"tips": [],
"warnings": [],
"parameters": [
{
"id": null,
"name": "Active",
"label": "Active",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "From Derivative\n\t\t\n\t\t\n\t\t\n\t\t\n\t\tJump to navigation\n\t\tJump to search\n\t\t\nTheOSC Out sends all input channels to a specified network address and port. Each channel name and associated data is transmitted together to the specified location. TouchDesigner time stamps all outgoing Open Sound Control messages with the time of the outgoing frame relative to the system time when the first message was sent. OSC CHOPs in TouchDesigner use the UDP transport protocol.\t\t\nOSC Out will either send all the channels each cook or it will only send each channel depending on if it has changed at all since the last time it was sent. This is determined by the flag.\nOSC bundles allows you to send a group of messages in a single command rather than as separate, individual messages. The OSC Out DAT has a sendOSC() function that will accept a list of messages and send as a bundle. \nSee also OSC In CHOP, OSC Out DAT, OSC In DAT, iOS and OSC, Touch Out CHOP, UDP Out DAT, TCP/IP DAT.\nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\noscoutCHOP_Class\n\nContents\n \n \n \n \n \n \n \n\n\n\n\n\n active - While On, the sends information to the network port. When Off, data is not sent.\n\n\n\t\t\n protocol - - Selects the network protocol to use. Refer to the Network Protocols article for more information.\n\n msging - multicastmsging - reliablemsging -\n\t\t\n netaddress - The network address of the server computer. This address is a standard WWW address, such as 'foo' or 'foo.bar.com'. You can put an IP address (e.g. 100.123.45.78). If you put \"localhost\", it means the other end of the pipe is on the same computer.\n\n\n\t\t\n port - The port which OSC Out will send packets to.\n\n\n\n localaddress - Specify an IP address to send from, useful when the system has mulitple NICs (Network Interface Card) and you want to select which one to use.\n\n\n\t\n maxsize - Specifies the maximum number of messages OSC Out will try to send at a single time.\n\n\n\t\t\n maxsizeunit - Select the units to use for this parameter, Samples, Frames, or Seconds\n\n\n\t\t\n cookalways - Specifies that this should be cooked every frame regardless of CHOPs below it are cooking.\n\n\n\t\t\n numericformat - - Choose the data format to send data between 32-bit integer, 32-bit float, or 64-bit double.\n\n int - float - double -\n\t\t\n format - - Specify how to format the outgoing messages.\n\n sample - Sends the current sample in each channel. timeslice - Sends all samples of the current Time Slice in each channel. transpose - Sends the first sample in each channel transposed together into a single multi-sample channel.\n\t\t\n maxbytes - Limits the size of the outgoing message packets and splits up the message accordingly.\n\n\n\t\t\n sendevents - When on, OSC Out will send all channels every cook regardless if the value has changed. When off, OSC Out only sends data which has changed.\n\n\n\n\n\n timeslice - Turning this on forces the channels to be \"Time Sliced\". A is the time between the last cook frame and the current cook frame.\n\n\n\n scope - To determine which channels get affected, some CHOPs use a string on the Common page. See Pattern Matching.\n\n\n\n srselect - - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.\n\n exportmethod - - This will determine how to connect the channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked table and references the channel via the index of the channel in the . datname - Uses the docked table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.\n\n autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.\n\n\n\n exporttable - The used to hold the export information when using the Table Methods (See above).\n\n\n\n\n\n -\n\nExtra Information for the OSC Out can be accessed via an Info CHOP.\n\n\n\n - Start of the interval in samples. - Number of samples in the . - The samplerate of the channels in frames per second. - Number of channels in the . - 1 if is enabled, 0 otherwise. - A count of how often the export connections have been updated.\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\nwikieditor2021.100002018.28070before 2018.28070\nCHOPs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\nTo re-compute the output data of the Operators. An operator cooks when (1) its inputs change, (2) its Parameters change, (3) when the timeline moves forward in some cases, or (4) Scripting commands are run on the node. When the operator is a Panel Component, it also cooks when a user interacts with it. When an operator cooks, it usually causes operators connected to its output to re-cook. When TouchDesigner draws the screen, it re-cooks all the Dependencies - the necessary operators in all Networks, contributing to a frame's total \"cook time\".\n\n\n\nThe term \"Frame\" is a measurement of time used (1) in the Timeline, (2) as a time-unit in CHOPs, and (3) as a time unit in movie files that are read into TOPs and written out from TOPs. The frame rate is the frames per second (FPS).\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nA Time Slice is the time from the last cook frame to the current cook frame. In CHOPs it is the set of short channels that contain the CHOP channels' samples between the last and the current cook frame.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nExporting is the connection of CHOP channels to parameters of operators. The output of each exporting CHOP is one or more channels, active only while the CHOP Viewer is on. The current value of a channel can be exported to a parameter of any operator, overriding that parameter's value. See Parameter.\n\n\n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nThe location of an operator within the TouchDesigner environment, for example, /geo1/circle1, a node called circle1 in a component called geo1. The path / is called Root. This path is displayed at the top of every Pane, showing which Component's network you are currently in. To refer instead to a filesystem folder, directory, disk file or http: address, see Folder.\n\n\n\nEvery operator in TouchDesigner has a set of control Parameters that can be integer or floating point numbers, menus, binary toggles, text strings or operator paths, which determine the output of the operator.\n\n\n\nTouchDesigner is a hierarchy of components. \"root\" is the top-most network in the hierarchy. The Network Path or Path for root is simply /. A typical path is /project1/moviein1.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=OSC_Out_CHOP&oldid=30755\"\n\t\tCategory: CHOPs",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.914Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Active",
"label": "Active",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "From Derivative\n\t\t\n\t\t\n\t\t\n\t\t\n\t\tJump to navigation\n\t\tJump to search\n\t\t\nTheOSC Out sends all input channels to a specified network address and port. Each channel name and associated data is transmitted together to the specified location. TouchDesigner time stamps all outgoing Open Sound Control messages with the time of the outgoing frame relative to the system time when the first message was sent. OSC CHOPs in TouchDesigner use the UDP transport protocol.\t\t\nOSC Out will either send all the channels each cook or it will only send each channel depending on if it has changed at all since the last time it was sent. This is determined by the flag.\nOSC bundles allows you to send a group of messages in a single command rather than as separate, individual messages. The OSC Out DAT has a sendOSC() function that will accept a list of messages and send as a bundle. \nSee also OSC In CHOP, OSC Out DAT, OSC In DAT, iOS and OSC, Touch Out CHOP, UDP Out DAT, TCP/IP DAT.\nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\noscoutCHOP_Class\n\nContents\n \n \n \n \n \n \n \n\n\n\n\n\n active - While On, the sends information to the network port. When Off, data is not sent.\n\n\n\t\t\n protocol - - Selects the network protocol to use. Refer to the Network Protocols article for more information.\n\n msging - multicastmsging - reliablemsging -\n\t\t\n netaddress - The network address of the server computer. This address is a standard WWW address, such as 'foo' or 'foo.bar.com'. You can put an IP address (e.g. 100.123.45.78). If you put \"localhost\", it means the other end of the pipe is on the same computer.\n\n\n\t\t\n port - The port which OSC Out will send packets to.\n\n\n\n localaddress - Specify an IP address to send from, useful when the system has mulitple NICs (Network Interface Card) and you want to select which one to use.\n\n\n\t\n maxsize - Specifies the maximum number of messages OSC Out will try to send at a single time.\n\n\n\t\t\n maxsizeunit - Select the units to use for this parameter, Samples, Frames, or Seconds\n\n\n\t\t\n cookalways - Specifies that this should be cooked every frame regardless of CHOPs below it are cooking.\n\n\n\t\t\n numericformat - - Choose the data format to send data between 32-bit integer, 32-bit float, or 64-bit double.\n\n int - float - double -\n\t\t\n format - - Specify how to format the outgoing messages.\n\n sample - Sends the current sample in each channel. timeslice - Sends all samples of the current Time Slice in each channel. transpose - Sends the first sample in each channel transposed together into a single multi-sample channel.\n\t\t\n maxbytes - Limits the size of the outgoing message packets and splits up the message accordingly.\n\n\n\t\t\n sendevents - When on, OSC Out will send all channels every cook regardless if the value has changed. When off, OSC Out only sends data which has changed.\n\n\n\n\n\n timeslice - Turning this on forces the channels to be \"Time Sliced\". A is the time between the last cook frame and the current cook frame.\n\n\n\n scope - To determine which channels get affected, some CHOPs use a string on the Common page. See Pattern Matching.\n\n\n\n srselect - - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.\n\n exportmethod - - This will determine how to connect the channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked table and references the channel via the index of the channel in the . datname - Uses the docked table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.\n\n autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.\n\n\n\n exporttable - The used to hold the export information when using the Table Methods (See above).\n\n\n\n\n\n -\n\nExtra Information for the OSC Out can be accessed via an Info CHOP.\n\n\n\n - Start of the interval in samples. - Number of samples in the . - The samplerate of the channels in frames per second. - Number of channels in the . - 1 if is enabled, 0 otherwise. - A count of how often the export connections have been updated.\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\nwikieditor2021.100002018.28070before 2018.28070\nCHOPs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\nTo re-compute the output data of the Operators. An operator cooks when (1) its inputs change, (2) its Parameters change, (3) when the timeline moves forward in some cases, or (4) Scripting commands are run on the node. When the operator is a Panel Component, it also cooks when a user interacts with it. When an operator cooks, it usually causes operators connected to its output to re-cook. When TouchDesigner draws the screen, it re-cooks all the Dependencies - the necessary operators in all Networks, contributing to a frame's total \"cook time\".\n\n\n\nThe term \"Frame\" is a measurement of time used (1) in the Timeline, (2) as a time-unit in CHOPs, and (3) as a time unit in movie files that are read into TOPs and written out from TOPs. The frame rate is the frames per second (FPS).\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nA Time Slice is the time from the last cook frame to the current cook frame. In CHOPs it is the set of short channels that contain the CHOP channels' samples between the last and the current cook frame.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nExporting is the connection of CHOP channels to parameters of operators. The output of each exporting CHOP is one or more channels, active only while the CHOP Viewer is on. The current value of a channel can be exported to a parameter of any operator, overriding that parameter's value. See Parameter.\n\n\n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nThe location of an operator within the TouchDesigner environment, for example, /geo1/circle1, a node called circle1 in a component called geo1. The path / is called Root. This path is displayed at the top of every Pane, showing which Component's network you are currently in. To refer instead to a filesystem folder, directory, disk file or http: address, see Folder.\n\n\n\nEvery operator in TouchDesigner has a set of control Parameters that can be integer or floating point numbers, menus, binary toggles, text strings or operator paths, which determine the output of the operator.\n\n\n\nTouchDesigner is a hierarchy of components. \"root\" is the top-most network in the hierarchy. The Network Path or Path for root is simply /. A typical path is /project1/moviein1.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=OSC_Out_CHOP&oldid=30755\"\n\t\tCategory: CHOPs",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.916Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Active",
"label": "Active",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "TheOSC Out sends all input channels to a specified network address and port. Each channel name and associated data is transmitted together to the specified location. TouchDesigner time stamps all outgoing Open Sound Control messages with the time of the outgoing frame relative to the system time when the first message was sent. OSC CHOPs in TouchDesigner use the UDP transport protocol.\t\t\nOSC Out will either send all the channels each cook or it will only send each channel depending on if it has changed at all since the last time it was sent. This is determined by the flag.\nOSC bundles allows you to send a group of messages in a single command rather than as separate, individual messages. The OSC Out DAT has a sendOSC() function that will accept a list of messages and send as a bundle. \nSee also OSC In CHOP, OSC Out DAT, OSC In DAT, iOS and OSC, Touch Out CHOP, UDP Out DAT, TCP/IP DAT.\nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\noscoutCHOP_Class\n\nContents\n \n \n \n \n \n \n \n\n\n\n\n\n active - While On, the sends information to the network port. When Off, data is not sent.\n\n\n\t\t\n protocol - - Selects the network protocol to use. Refer to the Network Protocols article for more information.\n\n msging - multicastmsging - reliablemsging -\n\t\t\n netaddress - The network address of the server computer. This address is a standard WWW address, such as 'foo' or 'foo.bar.com'. You can put an IP address (e.g. 100.123.45.78). If you put \"localhost\", it means the other end of the pipe is on the same computer.\n\n\n\t\t\n port - The port which OSC Out will send packets to.\n\n\n\n localaddress - Specify an IP address to send from, useful when the system has mulitple NICs (Network Interface Card) and you want to select which one to use.\n\n\n\t\n maxsize - Specifies the maximum number of messages OSC Out will try to send at a single time.\n\n\n\t\t\n maxsizeunit - Select the units to use for this parameter, Samples, Frames, or Seconds\n\n\n\t\t\n cookalways - Specifies that this should be cooked every frame regardless of CHOPs below it are cooking.\n\n\n\t\t\n numericformat - - Choose the data format to send data between 32-bit integer, 32-bit float, or 64-bit double.\n\n int - float - double -\n\t\t\n format - - Specify how to format the outgoing messages.\n\n sample - Sends the current sample in each channel. timeslice - Sends all samples of the current Time Slice in each channel. transpose - Sends the first sample in each channel transposed together into a single multi-sample channel.\n\t\t\n maxbytes - Limits the size of the outgoing message packets and splits up the message accordingly.\n\n\n\t\t\n sendevents - When on, OSC Out will send all channels every cook regardless if the value has changed. When off, OSC Out only sends data which has changed.\n\n\n\n\n\n timeslice - Turning this on forces the channels to be \"Time Sliced\". A is the time between the last cook frame and the current cook frame.\n\n\n\n scope - To determine which channels get affected, some CHOPs use a string on the Common page. See Pattern Matching.\n\n\n\n srselect - - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.\n\n exportmethod - - This will determine how to connect the channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked table and references the channel via the index of the channel in the . datname - Uses the docked table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.\n\n autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.\n\n\n\n exporttable - The used to hold the export information when using the Table Methods (See above).\n\n\n\n\n\n -\n\nExtra Information for the OSC Out can be accessed via an Info CHOP.\n\n\n\n - Start of the interval in samples. - Number of samples in the . - The samplerate of the channels in frames per second. - Number of channels in the . - 1 if is enabled, 0 otherwise. - A count of how often the export connections have been updated.\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\nwikieditor2021.100002018.28070before 2018.28070\nCHOPs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\nTo re-compute the output data of the Operators. An operator cooks when (1) its inputs change, (2) its Parameters change, (3) when the timeline moves forward in some cases, or (4) Scripting commands are run on the node. When the operator is a Panel Component, it also cooks when a user interacts with it. When an operator cooks, it usually causes operators connected to its output to re-cook. When TouchDesigner draws the screen, it re-cooks all the Dependencies - the necessary operators in all Networks, contributing to a frame's total \"cook time\".\n\n\n\nThe term \"Frame\" is a measurement of time used (1) in the Timeline, (2) as a time-unit in CHOPs, and (3) as a time unit in movie files that are read into TOPs and written out from TOPs. The frame rate is the frames per second (FPS).\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nA Time Slice is the time from the last cook frame to the current cook frame. In CHOPs it is the set of short channels that contain the CHOP channels' samples between the last and the current cook frame.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nExporting is the connection of CHOP channels to parameters of operators. The output of each exporting CHOP is one or more channels, active only while the CHOP Viewer is on. The current value of a channel can be exported to a parameter of any operator, overriding that parameter's value. See Parameter.\n\n\n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nThe location of an operator within the TouchDesigner environment, for example, /geo1/circle1, a node called circle1 in a component called geo1. The path / is called Root. This path is displayed at the top of every Pane, showing which Component's network you are currently in. To refer instead to a filesystem folder, directory, disk file or http: address, see Folder.\n\n\n\nEvery operator in TouchDesigner has a set of control Parameters that can be integer or floating point numbers, menus, binary toggles, text strings or operator paths, which determine the output of the operator.\n\n\n\nTouchDesigner is a hierarchy of components. \"root\" is the top-most network in the hierarchy. The Network Path or Path for root is simply /. A typical path is /project1/moviein1.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=OSC_Out_CHOP&oldid=30755\"",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Active",
"label": "Active",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "active - While On, the sends information to the network port. When Off, data is not sent.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Protocol",
"label": "Protocol",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "protocol - - Selects the network protocol to use. Refer to the Network Protocols article for more information.\n\n msging - multicastmsging - reliablemsging -",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Messaging (UDP)",
"label": "Messaging (UDP)",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "msging - multicastmsging - reliablemsging -",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Network Address",
"label": "Network Address",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "netaddress - The network address of the server computer. This address is a standard WWW address, such as 'foo' or 'foo.bar.com'. You can put an IP address (e.g. 100.123.45.78). If you put \"localhost\", it means the other end of the pipe is on the same computer.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Network Port",
"label": "Network Port",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "port - The port which OSC Out will send packets to.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Local Address",
"label": "Local Address",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "localaddress - Specify an IP address to send from, useful when the system has mulitple NICs (Network Interface Card) and you want to select which one to use.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Max Queue Size",
"label": "Max Queue Size",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "maxsize - Specifies the maximum number of messages OSC Out will try to send at a single time.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Max Queue Size Unit",
"label": "Max Queue Size Unit",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "maxsizeunit - Select the units to use for this parameter, Samples, Frames, or Seconds",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Cook Every Frame",
"label": "Cook Every Frame",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "cookalways - Specifies that this should be cooked every frame regardless of CHOPs below it are cooking.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Numeric Format",
"label": "Numeric Format",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "numericformat - - Choose the data format to send data between 32-bit integer, 32-bit float, or 64-bit double.\n\n int - float - double -",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Int (32 bit)",
"label": "Int (32 bit)",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "int - float - double -",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.918Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Data Format",
"label": "Data Format",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "format - - Specify how to format the outgoing messages.\n\n sample - Sends the current sample in each channel. timeslice - Sends all samples of the current Time Slice in each channel. transpose - Sends the first sample in each channel transposed together into a single multi-sample channel.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Sample",
"label": "Sample",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "sample - Sends the current sample in each channel. timeslice - Sends all samples of the current Time Slice in each channel. transpose - Sends the first sample in each channel transposed together into a single multi-sample channel.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Max Message Bytes",
"label": "Max Message Bytes",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "maxbytes - Limits the size of the outgoing message packets and splits up the message accordingly.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Send Events Every Cook",
"label": "Send Events Every Cook",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "sendevents - When on, OSC Out will send all channels every cook regardless if the value has changed. When off, OSC Out only sends data which has changed.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Time Slice",
"label": "Time Slice",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "timeslice - Turning this on forces the channels to be \"Time Sliced\". A is the time between the last cook frame and the current cook frame.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Scope",
"label": "Scope",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "scope - To determine which channels get affected, some CHOPs use a string on the Common page. See Pattern Matching.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Sample Rate Match",
"label": "Sample Rate Match",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "srselect - - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Resample At First Input's Rate",
"label": "Resample At First Input's Rate",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Export Method",
"label": "Export Method",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "exportmethod - - This will determine how to connect the channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked table and references the channel via the index of the channel in the . datname - Uses the docked table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "DAT Table by Index",
"label": "DAT Table by Index",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "datindex - Uses the docked table and references the channel via the index of the channel in the . datname - Uses the docked table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Export Root",
"label": "Export Root",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Export Table",
"label": "Export Table",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "exporttable - The used to hold the export information when using the Table Methods (See above).",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-07T07:50:05.919Z",
"rawData": {},
"sourceElement": null
}
],
"parameterGroups": {},
"codeExamples": [],
"pythonExamples": [],
"expressions": [],
"commonInputs": [],
"commonOutputs": [],
"relatedOperators": [],
"workflowPatterns": [],
"images": [],
"videos": [],
"assets": [],
"keywords": [
"osc",
"out",
"chop",
"theosc",
"sends",
"input",
"channels",
"specified",
"network",
"address",
"port.",
"each"
],
"tags": [
"CHOP",
"TouchDesigner",
"OSC Out CHOP"
],
"searchWeight": 1,
"contentHash": "",
"processingDate": "2025-08-07T07:50:05.920Z",
"processingVersion": "1.0.0",
"isValid": true,
"validationErrors": []
}