@bottobot/td-mcp
Version:
TouchDesigner Documentation MCP Server v2.3 - Pure MCP server for VS Code/Codium with comprehensive operator documentation for 629 operators + 7 tutorials across all categories (TOP, CHOP, SOP, DAT, MAT, COMP, POP). Features experimental POP operators wit
1,274 lines • 48.1 kB
JSON
{
"id": "udt_in",
"name": "In",
"displayName": "In",
"category": "DAT",
"subcategory": "Utilities",
"version": "",
"lastUpdated": "2025-08-08T00:37:55.575Z",
"sourceFile": "C:\\Program Files\\Derivative\\TouchDesigner\\Samples\\Learn\\OfflineHelp\\https.docs.derivative.ca\\UDT_In_DAT.htm",
"url": "",
"description": "NOTE This DAT has been removed from TouchDesigner 2021 Official builds and later.",
"summary": "NOTE This DAT has been removed from TouchDesigner 2021 Official builds and later.",
"details": "",
"usage": "",
"tips": [],
"warnings": [],
"parameters": [
{
"id": null,
"name": "Protocol",
"label": "Protocol",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "From Derivative\n\t\t\n\t\t\n\t\t\n\t\t\n\t\tJump to navigation\n\t\tJump to search\n\t\t\nNOTE This has been removed from TouchDesigner 2021 Official builds and later.\nThe UDT In is used for receiving information over a UDT connection between two remotely located computers. It captures all the messages without any queuing or buffering, and allows you to send it any messages you want. UDT Streaming is a reliable, streaming, connection orientated protocol. A single server can send to multiple clients at the same time.\t\t\nHandle received messages using the callback attached to the UDT In . Send replies using the udtinDAT_Class.\t\t\t\nSee also Peer Class, UDT Out DAT, Network Protocols. \nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\nudtinDAT_Class\n\nContents\n \n \n \n \n\n\n\n\n protocol - - Select which protocol to use, refer to the Network Protocols article for more information.\n\n faststreaming - reliablemsging -\n\t\t\n address - You can put an IP address to listen on (224.0.0.1). This parameter is only needed for multicast protocols.\n\n\n\t\t\n port - The network port the listen on.\n\n\n\t\t\n shared - Use the same connection as other networking DATs using the same network protocol.\n\n\n\t\t\n format - - Determines how the incoming data is parsed into the table.\n\n perbyte - One row is added to the table per byte received. perline - One row is added to the table per line received. permessage - One row is added to the table per message received.\n\t\t\n active - This check box enables the connection.\n\n\n\n\n\n callbacks - The Callbacks will execute once for each message coming in. See udtinDAT_Class for usage.\n\n\n\t\t\n executeloc - - Determines the location the script is run from.\n\n current - The script is executed from the current node location callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.\n\t\t\n fromop - The operator whose state change will trigger the to execute its script when is set to . This operator is also the path that the script will be executed from if the parameter is set to .\n\n\n\t\t\n clamp - The is limited to 100 messages by default but with Clamp Output, this can be set to anything including unlimited.\n\n\n\t\t\n maxlines - Limits the number of messages, older messages are removed from the list first.\n\n\n\t\t\n clear - Deletes all lines except the heading. To clear with a python script op(\"opname\").par.clear.pulse()\n\n\n\t\t\n bytes - Outputs the raw bytes of the message in a separate column.\n\n\n\n\n\n language - - Select how the decides which script language to operate on.\n\n input - The uses the inputs script language. node - The uses it's own script language.\n\n extension - - Select the file extension this should expose to external editors.\n\n dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.\n\n customext - Specifiy the custom extension.\n\n\n\n wordwrap - - Enable Word Wrap for Node Display.\n\n input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.\n\nTouchDesigner Build: Latest\\n2020.200002019.207002018.28070before 2018.28070\nDATs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nSome operators have a DAT docked to them that contains some python functions. These functions, called \"callbacks\", get called when something in the operator changes.\n\n\n\nThe generic thing that holds an Operator, and includes Flags (display, bypass, lock, render, immune) and its position/size in the network. Whether you \"lay down an Operator\" or \"lay down an Node\", you're doing the same thing.\n\n\n\nAny of the procedural data operators. OPs do all the work in TouchDesigner. They \"cook\" and output data to other OPs, which ultimately result in new images, data and audio being generated. See Node.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=UDT_In_DAT&oldid=25186\"\n\t\tCategory: DATs",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.569Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Protocol",
"label": "Protocol",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "From Derivative\n\t\t\n\t\t\n\t\t\n\t\t\n\t\tJump to navigation\n\t\tJump to search\n\t\t\nNOTE This has been removed from TouchDesigner 2021 Official builds and later.\nThe UDT In is used for receiving information over a UDT connection between two remotely located computers. It captures all the messages without any queuing or buffering, and allows you to send it any messages you want. UDT Streaming is a reliable, streaming, connection orientated protocol. A single server can send to multiple clients at the same time.\t\t\nHandle received messages using the callback attached to the UDT In . Send replies using the udtinDAT_Class.\t\t\t\nSee also Peer Class, UDT Out DAT, Network Protocols. \nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\nudtinDAT_Class\n\nContents\n \n \n \n \n\n\n\n\n protocol - - Select which protocol to use, refer to the Network Protocols article for more information.\n\n faststreaming - reliablemsging -\n\t\t\n address - You can put an IP address to listen on (224.0.0.1). This parameter is only needed for multicast protocols.\n\n\n\t\t\n port - The network port the listen on.\n\n\n\t\t\n shared - Use the same connection as other networking DATs using the same network protocol.\n\n\n\t\t\n format - - Determines how the incoming data is parsed into the table.\n\n perbyte - One row is added to the table per byte received. perline - One row is added to the table per line received. permessage - One row is added to the table per message received.\n\t\t\n active - This check box enables the connection.\n\n\n\n\n\n callbacks - The Callbacks will execute once for each message coming in. See udtinDAT_Class for usage.\n\n\n\t\t\n executeloc - - Determines the location the script is run from.\n\n current - The script is executed from the current node location callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.\n\t\t\n fromop - The operator whose state change will trigger the to execute its script when is set to . This operator is also the path that the script will be executed from if the parameter is set to .\n\n\n\t\t\n clamp - The is limited to 100 messages by default but with Clamp Output, this can be set to anything including unlimited.\n\n\n\t\t\n maxlines - Limits the number of messages, older messages are removed from the list first.\n\n\n\t\t\n clear - Deletes all lines except the heading. To clear with a python script op(\"opname\").par.clear.pulse()\n\n\n\t\t\n bytes - Outputs the raw bytes of the message in a separate column.\n\n\n\n\n\n language - - Select how the decides which script language to operate on.\n\n input - The uses the inputs script language. node - The uses it's own script language.\n\n extension - - Select the file extension this should expose to external editors.\n\n dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.\n\n customext - Specifiy the custom extension.\n\n\n\n wordwrap - - Enable Word Wrap for Node Display.\n\n input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.\n\nTouchDesigner Build: Latest\\n2020.200002019.207002018.28070before 2018.28070\nDATs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nSome operators have a DAT docked to them that contains some python functions. These functions, called \"callbacks\", get called when something in the operator changes.\n\n\n\nThe generic thing that holds an Operator, and includes Flags (display, bypass, lock, render, immune) and its position/size in the network. Whether you \"lay down an Operator\" or \"lay down an Node\", you're doing the same thing.\n\n\n\nAny of the procedural data operators. OPs do all the work in TouchDesigner. They \"cook\" and output data to other OPs, which ultimately result in new images, data and audio being generated. See Node.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=UDT_In_DAT&oldid=25186\"\n\t\tCategory: DATs",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.571Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Protocol",
"label": "Protocol",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "NOTE This has been removed from TouchDesigner 2021 Official builds and later.\nThe UDT In is used for receiving information over a UDT connection between two remotely located computers. It captures all the messages without any queuing or buffering, and allows you to send it any messages you want. UDT Streaming is a reliable, streaming, connection orientated protocol. A single server can send to multiple clients at the same time.\t\t\nHandle received messages using the callback attached to the UDT In . Send replies using the udtinDAT_Class.\t\t\t\nSee also Peer Class, UDT Out DAT, Network Protocols. \nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\nudtinDAT_Class\n\nContents\n \n \n \n \n\n\n\n\n protocol - - Select which protocol to use, refer to the Network Protocols article for more information.\n\n faststreaming - reliablemsging -\n\t\t\n address - You can put an IP address to listen on (224.0.0.1). This parameter is only needed for multicast protocols.\n\n\n\t\t\n port - The network port the listen on.\n\n\n\t\t\n shared - Use the same connection as other networking DATs using the same network protocol.\n\n\n\t\t\n format - - Determines how the incoming data is parsed into the table.\n\n perbyte - One row is added to the table per byte received. perline - One row is added to the table per line received. permessage - One row is added to the table per message received.\n\t\t\n active - This check box enables the connection.\n\n\n\n\n\n callbacks - The Callbacks will execute once for each message coming in. See udtinDAT_Class for usage.\n\n\n\t\t\n executeloc - - Determines the location the script is run from.\n\n current - The script is executed from the current node location callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.\n\t\t\n fromop - The operator whose state change will trigger the to execute its script when is set to . This operator is also the path that the script will be executed from if the parameter is set to .\n\n\n\t\t\n clamp - The is limited to 100 messages by default but with Clamp Output, this can be set to anything including unlimited.\n\n\n\t\t\n maxlines - Limits the number of messages, older messages are removed from the list first.\n\n\n\t\t\n clear - Deletes all lines except the heading. To clear with a python script op(\"opname\").par.clear.pulse()\n\n\n\t\t\n bytes - Outputs the raw bytes of the message in a separate column.\n\n\n\n\n\n language - - Select how the decides which script language to operate on.\n\n input - The uses the inputs script language. node - The uses it's own script language.\n\n extension - - Select the file extension this should expose to external editors.\n\n dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.\n\n customext - Specifiy the custom extension.\n\n\n\n wordwrap - - Enable Word Wrap for Node Display.\n\n input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.\n\nTouchDesigner Build: Latest\\n2020.200002019.207002018.28070before 2018.28070\nDATs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nSome operators have a DAT docked to them that contains some python functions. These functions, called \"callbacks\", get called when something in the operator changes.\n\n\n\nThe generic thing that holds an Operator, and includes Flags (display, bypass, lock, render, immune) and its position/size in the network. Whether you \"lay down an Operator\" or \"lay down an Node\", you're doing the same thing.\n\n\n\nAny of the procedural data operators. OPs do all the work in TouchDesigner. They \"cook\" and output data to other OPs, which ultimately result in new images, data and audio being generated. See Node.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=UDT_In_DAT&oldid=25186\"",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.573Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Protocol",
"label": "Protocol",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "protocol - - Select which protocol to use, refer to the Network Protocols article for more information.\n\n faststreaming - reliablemsging -",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.573Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Fast Streaming",
"label": "Fast Streaming",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "faststreaming - reliablemsging -",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.573Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Network Address",
"label": "Network Address",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "address - You can put an IP address to listen on (224.0.0.1). This parameter is only needed for multicast protocols.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.573Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Port",
"label": "Port",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "port - The network port the listen on.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.573Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Shared Connection",
"label": "Shared Connection",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "shared - Use the same connection as other networking DATs using the same network protocol.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.573Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Row/Callback Format",
"label": "Row/Callback Format",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "format - - Determines how the incoming data is parsed into the table.\n\n perbyte - One row is added to the table per byte received. perline - One row is added to the table per line received. permessage - One row is added to the table per message received.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.573Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "One Per Byte",
"label": "One Per Byte",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "perbyte - One row is added to the table per byte received. perline - One row is added to the table per line received. permessage - One row is added to the table per message received.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Active",
"label": "Active",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "active - This check box enables the connection.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Callbacks DAT",
"label": "Callbacks DAT",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "callbacks - The Callbacks will execute once for each message coming in. See udtinDAT_Class for usage.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Execute from",
"label": "Execute from",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "executeloc - - Determines the location the script is run from.\n\n current - The script is executed from the current node location callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Current Node",
"label": "Current Node",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "current - The script is executed from the current node location callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "From Operator",
"label": "From Operator",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "fromop - The operator whose state change will trigger the to execute its script when is set to . This operator is also the path that the script will be executed from if the parameter is set to .",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Clamp Output",
"label": "Clamp Output",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "clamp - The is limited to 100 messages by default but with Clamp Output, this can be set to anything including unlimited.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Maximum Lines",
"label": "Maximum Lines",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "maxlines - Limits the number of messages, older messages are removed from the list first.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Clear Output",
"label": "Clear Output",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "clear - Deletes all lines except the heading. To clear with a python script op(\"opname\").par.clear.pulse()",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Bytes Column",
"label": "Bytes Column",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "bytes - Outputs the raw bytes of the message in a separate column.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Language",
"label": "Language",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "language - - Select how the decides which script language to operate on.\n\n input - The uses the inputs script language. node - The uses it's own script language.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Input",
"label": "Input",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "input - The uses the inputs script language. node - The uses it's own script language.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Edit/View Extension",
"label": "Edit/View Extension",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "extension - - Select the file extension this should expose to external editors.\n\n dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "dat",
"label": "dat",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Custom Extension",
"label": "Custom Extension",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "customext - Specifiy the custom extension.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Word Wrap",
"label": "Word Wrap",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "wordwrap - - Enable Word Wrap for Node Display.\n\n input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.574Z",
"rawData": {},
"sourceElement": null
},
{
"id": null,
"name": "Input",
"label": "Input",
"group": "General",
"page": "",
"type": "float",
"dataType": "number",
"style": "",
"defaultValue": null,
"minValue": null,
"maxValue": null,
"step": null,
"menuItems": [],
"menuLabels": [],
"allowCustom": false,
"maxLength": null,
"pattern": null,
"isArray": false,
"arraySize": 1,
"dimensions": 1,
"description": "input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.",
"tooltip": "",
"help": "",
"units": "",
"examples": [],
"isReadOnly": false,
"isAdvanced": false,
"isHidden": false,
"isAnimatable": true,
"isExpression": false,
"isPython": false,
"dependsOn": [],
"affects": [],
"linkedTo": [],
"expressionLanguage": "",
"defaultExpression": "",
"commonExpressions": [],
"order": 0,
"isVisible": true,
"conditionalDisplay": null,
"isValid": true,
"validationErrors": [],
"lastUpdated": "2025-08-08T00:37:55.575Z",
"rawData": {},
"sourceElement": null
}
],
"parameterGroups": {},
"codeExamples": [],
"pythonExamples": [],
"expressions": [],
"commonInputs": [],
"commonOutputs": [],
"relatedOperators": [],
"workflowPatterns": [],
"images": [],
"videos": [],
"assets": [],
"keywords": [
"udt",
"in",
"note",
"removed",
"touchdesigner",
"2021",
"official",
"builds",
"later."
],
"tags": [
"DAT",
"TouchDesigner",
"UDT In"
],
"searchWeight": 1,
"contentHash": "",
"processingDate": "2025-08-08T00:37:55.575Z",
"processingVersion": "1.0.0",
"isValid": true,
"validationErrors": []
}