@azure/web-pubsub-express/dist/browser/enum/MqttErrorCodes/mqttV500ConnectReasonCode.d.ts

Azure Web PubSub CloudEvents handlers

/**
 * MQTT Connect Reason Codes
 * These codes represent the reasons for the outcome of an MQTT CONNECT packet as per MQTT 5.0 specification.
 */
export declare enum MqttV500ConnectReasonCode {
    /**
     * 0x80 - Unspecified error
     * Description: The Server does not wish to reveal the reason for the failure, or none of the other Reason Codes apply.
     */
    UnspecifiedError = 128,
    /**
     * 0x81 - Malformed Packet
     * Description: Data within the CONNECT packet could not be correctly parsed.
     */
    MalformedPacket = 129,
    /**
     * 0x82 - Protocol Error
     * Description: Data in the CONNECT packet does not conform to this specification.
     */
    ProtocolError = 130,
    /**
     * 0x83 - Implementation specific error
     * Description: The CONNECT is valid but is not accepted by this Server.
     */
    ImplementationSpecificError = 131,
    /**
     * 0x84 - Unsupported Protocol Version
     * Description: The Server does not support the version of the MQTT protocol requested by the Client.
     */
    UnsupportedProtocolVersion = 132,
    /**
     * 0x85 - Client Identifier not valid
     * Description: The Client Identifier is a valid string but is not allowed by the Server.
     */
    ClientIdentifierNotValid = 133,
    /**
     * 0x86 - Bad User Name or Password
     * Description: The Server does not accept the User Name or Password specified by the Client.
     */
    BadUserNameOrPassword = 134,
    /**
     * 0x87 - Not authorized
     * Description: The Client is not authorized to connect.
     */
    NotAuthorized = 135,
    /**
     * 0x88 - Server unavailable
     * Description: The MQTT Server is not available.
     */
    ServerUnavailable = 136,
    /**
     * 0x89 - Server busy
     * Description: The Server is busy. Try again later.
     */
    ServerBusy = 137,
    /**
     * 0x8A - Banned
     * Description: This Client has been banned by administrative action. Contact the server administrator.
     */
    Banned = 138,
    /**
     * 0x8C - Bad authentication method
     * Description: The authentication method is not supported or does not match the authentication method currently in use.
     */
    BadAuthenticationMethod = 140,
    /**
     * 0x90 - Topic Name invalid
     * Description: The Will Topic Name is not malformed, but is not accepted by this Server.
     */
    TopicNameInvalid = 144,
    /**
     * 0x95 - Packet too large
     * Description: The CONNECT packet exceeded the maximum permissible size.
     */
    PacketTooLarge = 149,
    /**
     * 0x97 - Quota exceeded
     * Description: An implementation or administrative imposed limit has been exceeded.
     */
    QuotaExceeded = 151,
    /**
     * 0x99 - Payload format invalid
     * Description: The Will Payload does not match the specified Payload Format Indicator.
     */
    PayloadFormatInvalid = 153,
    /**
     * 0x9A - Retain not supported
     * Description: The Server does not support retained messages, and Will Retain was set to 1.
     */
    RetainNotSupported = 154,
    /**
     * 0x9B - QoS not supported
     * Description: The Server does not support the QoS set in Will QoS.
     */
    QosNotSupported = 155,
    /**
     * 0x9C - Use another server
     * Description: The Client should temporarily use another server.
     */
    UseAnotherServer = 156,
    /**
     * 0x9D - Server moved
     * Description: The Client should permanently use another server.
     */
    ServerMoved = 157,
    /**
     * 0x9F - Connection rate exceeded
     * Description: The connection rate limit has been exceeded.
     */
    ConnectionRateExceeded = 159
}
//# sourceMappingURL=mqttV500ConnectReasonCode.d.ts.map